Similar Questions

• Problem with search in Windows 7.

  I have trouble with the search in windows 7 I want to help with.

  The two subjects that I found useful but still does not work are http://answers.microsoft.com/en-us/windows/forum/windows_7-files/partial-search-with-a-alphanumeric-filename/88af5142-cbe3-4fdd-a0d7-c417a099b9df and http://answers.microsoft.com/en-us/windows/forum/windows_7-files/windows-7-search-does-not-find-partial-matches/6e6df6b0-b1ff-4bc6-b8c0-569fd57f6dd9. Also http://msdn.microsoft.com/en-us/library/aa965711(v=vs.85).aspx is of no. real help.

  I tried the above but the right solution does not work for me even if it worked for them.

  I have a lot of problems with the search

  In addition, any word with the first letters does not work. In the search for trials, if enter test Yes, register is not. It happens when you search for content or name.

  But sometimes even this rule is broken. If enter the name (including the first part) - the file does not always display (and I manually look at the file in the list - I have even opened the file.) If there is).

  A moment another weird is when I type (name: 'power he don't know) I would be able to find the file "power he knew not18.
  but the type (name: "power he don't know") I would not find it.

  I also want to know what happens if I only know the last part of a file name, for example, I tried (name: * peter) and I also tried (name: * peter *) still does not work on the test name - testpeter.testing.txt

  In another case (content: ~ * ometime *) does not work, also tried to use content: (ometime) to search for the word "sometimes" in a txt file content.

  Please note that the partial search in option file in folder option is 'ON' in all cases.

  Somehow JUST DID AGAIN TEST I have a new file called testing.txt with only a word marcosoft inside, and I can not even find the word even acro with * free *.

  I know the name or content exists because the files that I have tested it with are txt files that I specifically create a new test case.

  I want to be able to look up the correct name. If even the old win 98 can search for the last part of a file name, then why not windows 7?

  Thank you

  It work?

  content: ~ = cab

  If for some reason any Windows 7 Search will do the work for you, there are many freeware to try alternatives:

  xsearch/easexp.com, mythicsoft.com/agentransack, locate32.cogit.net, jam - software.com / ultrasearch, tools.tortoisesvn.net/grepWin.html, voidtools.com, mcrenox.com.ar/filefinder, fsl.sytes.net/ssearchxt.html

• Problem with the results of the quiz.

  Hey guys, I have a problem with a questionnaire that I need to do, I use this model: http://www.Permadi.com/Tutorial/flashMXQuiz/index.html

  But does not include what I need and it is to know how to put a message at the end of the game that tells you that you have won or lost depending on if you had at least two questions of law or right less than two.

  I ve looking and have not found not any code I could add to my ActionScript.

  I have also tried with variables like this:

  If (numofQuestionsAnsweredCorrectly > = 2) {gotoAndPlay (3)}

  on the other

  {gotoAndPlay (6)}

  .. and stuff like that. I'm sorry if it's completely false... I'm just starting to learn.

  I hope someone can help me with this.

  Thank you

  Thank you guys so much for answering this quickly! I got the answer correctly thanks in part to Ned Murphy for having said that my code is correct. I feel a bit stupid because while I wrote correctly here, which actually was a mistake, you see, I had a couple of frames containing the tag that win or lose, and instead of the chassis number that I had written their names as in {gotoAndPlay("win")} but I wrote from memory and didn't know I had just changed. I realized that before sinious replied, but I'll check your tutorial anyway.

  Thank you very much.

• App Store problems not search results or slow download

  Since the update to 9.3.3 iOS App Store (East coast of United States for me) gave me a lot of problems and errors with the search for updates and installation of applications. App detail pages also not load. What a coincidence, the update iOS or something else? -I can't even this post to the correct community (grayed out).

  Try a simple Reset: hold down the Home and Power buttons until you see the Apple logo (10 to 20 seconds).

• Problem with search and deletion functions

  I use Vista Ultimate and in recent weeks, I have problems using the search and delete functions. Whenever I'm trying to look for something in the search window does not allow me to do and goes in a hand. Whenever I delete something, a small window pops up saying deletion... .and this continues forever.

  Hello

  What antivirus/antispyware/security products do you have on machine? Be one
  you have ALWAYS had on this machine, including those you have uninstalled (they leave leftovers
  can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Problem with search and find

  Hello

  When I do a search on the character of p. grep

  InDesign find the character

  PA

  instead. And it won't. What is the problem and how can I solve this problem?

  Would appreciate your help.

  With regard to Camille

  If you are looking for a letter p followed by a period (per), then the search should be

  p\.

  the period without the escape character in Grep will find [character]

• Problem with search

  Hi experts,
  
  Jdev version 11.1.2.2
  
  I have a search page. I've developed it creating a view of the criteria in the VO and slide it into the component of the page request.
  My requirement is a provision in the search panel, where I need the search panel would be rendered in 4 columns, each column will have an uneven number of fields and each column must have a cap on top.
  Is there a way to customize the layout to achieve the above?
  
  Because I could not achieve the above declaratively or programmatically, I changed my search panel based on the binding to execute query settings and manually the display criteria and performing the search instead of using the query component.
  So I dragged the execute with parameters as a parameter on the page operation. But some of my fields are the list of values. I tried to create a dynamic list binding. But jdev does not create a list of values other than the led model. Also when I drag the variable binding the control to data at the page, it does give me an option to create like a lov. So my second question is to know how to create a link VO as a LOV on page field variable?
  
  Or is there a better way to achieve the above features?
  
  Published by: manel on December 20, 2012 10:02

  The customizations that you can make available to the request item are limited, and your second approach is probably correct.
  Here's how you can add LOVs if necessary:
  https://blogs.Oracle.com/Shay/entry/adding_an_lov_to_a_query_param
  and
  https://blogs.Oracle.com/Shay/entry/adding_lov_to_non_database

• Problem with search for bridge

  I'm doing something wrong?

  I have the title my folders with names of model.

  I put the names, first of all, finally, nothing works, no record came with bridge research. Help. Thank you!

  no record came with bridge research.

  Using both the top of the search field right in the Bridge window and order search under edit gives me the file I searched, so it should work.

• Problem with CFQUERY results

  Hello

  IM an export of the construction data and trying to build dynamically columns in the export file by storing and pulling them on a separate database table.  My problem is with a column called "COL-1".  IM the construction data export using the method below, then to the two variables together to create export...

  < cfsavecontent variable ="dataheader"> <cfoutput query ='getColumns'>#getColumns.column_nm #| < / cfoutput > < cfoutput> #chr (13) ##chr (10) #< / cfoutput > < / cfsavecontent >
  "< cfsavecontent variable = 'statements' > '.
  "< cfoutput query = 'getData' > '.
  "< cfloop query = 'getColumns' > '.
  <!-threshold is where the error occurs->
  < cfset variables.col_value = '#evaluate ("" getData. "") (& getColumns.column_nm) #:' >
  < / cfloop >
  < / cfoutput >
  < / cfsavecontent >
  < cfset variables.data_export = dataheader & found >

  Error occurred while processing request

  COLLAR of the element is undefined in GETDATA.

  
  How to evaluate() the name of the entire column (COL-1) CF?

  Post edited by: BigFeetBigShoes - restructured code example.

  How the name of the entire column CF to evaluate()

  (COL-1)?

  You can use the notation of table instead of evaluate. The basic syntax is

  yourQueryName [columnName] [rowNumber]

• problem with the resulting strategy game. MSC and Gpresult (getting access denied)

  Please let me know that all permissions should be changed to this

  It is a question of Directory Server / Active and not really applicable on the performance of Windows-support to the consumer forum.  Search the TechNet and MSDN forums for the server support.

• Problems with search

  When I enter the search criteria (no internet) Explorer, an x to clear the box appears instead of the magnifying glass.  Therefore, I'm unable to research.  Also, indexing is not enabled.  I tried all the various patches on the site Web of Microsoft, but none seems to work.

  Kelly

  Have you tried to rebuild the Index?

  Select Start, Control Panel, Indexing Options, advanced and click on the reset button. It takes a long time and the process is better not interrupted.

• Problem with searching for computer on the network. Error: "unable to browse the network. The network is not present or not started. »

  Hello

  I have two NICs connected to my computer for creating hotspot Wifi network. I created successively network Wi - Fi hotspot. But after that when I tried to connect to my local network computers
  My network places-> network-> network Microsoft Windows. I get this error "unable to browse the network. The network is not present or not started. »
  Thank you.

  I am able to fix this by myself.

  The solution that worked for me:
  Run as administrator command prompt.
  Insert the Windows XP Sp3 CD in disc drive (I have xp sp3 installed)
  
  At the command prompt, type in
  
  
  SFC/SCANNOW
  
  
  
  

• Problem with searching for a drivers for my PC

  Hello

  I have HP DV6500 that has windows 7 Home Basic.

  I have just the format this PC and I want to know what are the drivers needed to download and I may have these drivers?

  BES regrads,

  Hello:

  The info you posted reveal audio for the Realtek HD audio chip.

  Here is the link for the drivers. Accept the agreement. Download and install either the first or the second pilot on the list (32 or 64 bit depending on the case).

  http://152.104.125.41/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Paul

• Links in search results does not open new tabs.

  I'm missing something here and in other threads on this topic. I used to be able to search in the google search bar, for example, and a new tab opens with the search results. So if I left clicked on a link in the search results another new tab open and go to the linked page.

  I don't remember how that was put in place, but I know that I didn't have to enter: config or install a special plug-in for it. I think that it has been implemented in the mixture of label more module.

  I have no problem with search results, open a new tab, it is that I must now click on a link or right click + click 'open in new tab '.

  What has changed here, and why? My old method worked in ver 21, he turned into worm. 22.

  It seems that all these "updates" remove stuff that we used to have without notice and then come up with more finger clicks and config edits to make what was simple before.

  For the search bar in the Navigation toolbar, you can set the browser.search.openintab true pref on the topic: config page.

  For the Google Web site, you can make the change to the Google search settings page you can open through the gear icon on the Google results page.

  Note that you can always force a link to open it in a new tab on middle - clicking on the link.
  
  This also works for some entries in the context menu and some buttons (home, registration in the back and front button drop-down list etc.).

• URLs are hidden in the search result

  Hello

  I have a problem with the search results. I mean that the URL of the search results are hidden and I can't see them. Either way, Internet explore, I have no problem with the results. I did a screen capture to see my problem.
  mozilla ptrscn.

  the problem solved when I delete my Google account +...