Problem with the results of the quiz.

Similar Questions

• Satellite C40D-C - problems with the system

  I recently bought an a toshiba satellite C40D-C Series notebook PC as my old satellite - essentially - is dying. After you connect to the internet, I tried to download AVG Antivirus on my computer that I don't have - and never - trust McAfee anti-virus that comes with the computer. Every time downloaded AVG then restart my computer, the computer goes directly into the automatic repair system and doesn't let me do anything but to reset or restore. This has happened even with completely removed McAfee. I've been on AVG directly today (January 15), and they have to do remote set-up for me - with the same results. Yes, I'm aware that McAfee is a selfish cry of a system and refuses to acknowledge any other antivirus, but that this issue happens even with completely removed McAfee shows clearly that it is something that Toshiba has worked in the system. I can't even disable the automatic repair tool. I have to be stuck with a McAfee antivirus which, moreover, does not yet or is Toshiba will make an effort to help solve a problem they caused?

  Why this computer isn't allowing AVG Antivirus work? And why, after each attempt to download AVG, the computer goes to auto repair whenever I shut down or restart? Is this a problem with the system or something, Toshiba has done on purpose?

• Satellite L875-13D - problem with the installation of the wireless card

  Hello

  I bought a Toshiba Satellite L875-13D. I installed Windows 7 Enterprise edition.

  I have a problem with the installation of the wireless card. I have downloaded the driver on Toshiba website, but it does not work. When I run the file .zip and .exe, nothing happens. In addition, there are several pilots: Athos, Intel and Realtek and I do not know what is mine... I test all the driver but same result.

  I have the same problem with Bluetooth driver that does not work too.

  Thank you for your help.

  > But it does not work yet for Bluetooth,... I have install the driver by the .exe from the Toshiba Web site but when I run the application, I have error that says missing tosbtapi.dll. I founded and downloaded and installed on budget3 and SysWOW. But after that, the installation is blocked. Any ideas?

  Laptop Satellite L875-13D isn t equipped with Bluetooth.
  Didn t you know who?

• Problem with the Conexant HDAudio after installing x 86 Vista SP1

  I didn't want to start a new thread, but it seems that my problem is quite unique.
  
  When the first x 86 Vista install my speakers/headphones worked great. After Vista SP1 installed, my speakers/headphones went silent, but the pilot was still there and working properly. I uninstalled the driver and let Windows automatically install a different driver. (No Rollback was available) I could get the sound from my speakers. Speakers are the only thing that works if I plug into the headphone jack or not.

  When connected to the plug headphones I have test the headphones feature in playback devices and receive nothing in the helmet.
  
  Drivers of HP support only cut my speakers while doing my reading helmet camera disappear. Even with the updated driver.
  
  I like to use it as a TV computer and would like the sound of the TV via the headphone jack.
  
  I searched EVERYWHERE on the internet and found no resolution. Any help would be appreciated.
  
  HP pavilion dv6748us

  Conexant Audio
  
  Hardware ID:

  HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30CF & REV_1000

  HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30CF

  Have encountered problems with the card drivers its me on vista & 7 even when driver installation correct support downloaded installers.

  Only solution I found was to download a range of versions of different driver bought research google & trials, tedious but sometimes only way to get the result.

  If you uninstall the driver & restart it installs a generic driver audio Conexant or Windows!

  I also use my laptop with TV & hifi so work taken audio is a must (card input jack usb audio can be an option if)

  Also never rule out the fault of Council helmet as have a Pavilion & after that OS installed on a new drive HARD had no audio for headphones, pilot presumed linked, but after fiddling fuond twist got jack sound, turned Ribbon glued on card Board failed.

• Satellite C850 - found problems with the networking and the FN key

  Hey everybody,

  I work on a Satellite Toshiba C850, that my parents recently bought and spin in a certain number of questions.

  (1) wireless won't connect to my network. Have done the following: verified by connecting on two other computers, reset the router, the open network, reset the map, reinstalled the realtek drivers, checked the settings in the networking of Toshiba Utilities. End result is he's going to try, and fail. Wired LAN works fine.

  (2) FN key does not work. Have you checked the region and it is OK, have tried to use the Flash cards - no change, checked with the screen keyboard and can check the FN key does not register.

  I noticed that the first problem is common, but there are obvious positive results. If anyone can offer any assistance, I would appreciate it a lot.

  Before you begin to discuss your problems can you please tell us what OS you are using?
  Are you using the original OS that you got with your laptop? I mean original recovery image has been tested and works correctly, with the factory settings that all should especially the FN keys.

  1 / What do you mean with refusing? your WLAN is visible for your laptop?

  2 / if there is problem with the feature keys FN and you use Win7 try please reinstall extra package from Toshiba.

• Satellite U300-13U - iTunes has detected a problem with the audio configuration

  Please can someone help me? I have a laptop U300-13U and that you have installed iTunes on it. However, when I open iTunes I get an error message saying 'iTunes has detected a problem with the audio configuration and may not play correctly' which is an understatement - it does not at all!

  I uninstalled, reinstalled iTunes and Quicktime, but in vain. I have searched and exhausted the iTunes support boards but have nowhere either. The sound is fine as I can read CDs with no problems at all. The only suggestion I can get is that there may be a problem with the audio device magnet is not Apple and vice versa.

  Does anyone have AN idea at all as to what might be going on here? I'm completely out of my depth, I'm just a simple girl who wants to play his music!

  Thank you so much.

  Hello

  I don t use iTunes so I m not an expert player but first of all, you must give us some important information:
  -What operating system do you use?
  -Are you using the factory settings (Toshiba Recovery disk) or your own version of Windows
  -Do you have the yellow exclamation marks in Device Manager?

  OK, iTunes says that there is an audio configuration problem so do you trying to update the audio driver? If this isn't the case, you should try it.
  See the Web from Toshiba site for an update and see what happens. Then validate your result:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Welcome them

• Problem with the published parameters between the movement of FCPX

  Hello

  I have a little problem with the settings published between the movement at FCPX.

  For some reason, the published parameters have different values within FCPX in movement.

  For example, in motion, a parameter is - 187.04 and in FCPX is-0,19. What are the parameters of position for CSOS.

  If I try to change this setting in FCPX, the application crashes after 10 seconds or less.

  No idea what is causing the problem? I re-edited the effect several times, same result. The software that I use is FCPX 10.2.2 and 10.2 of the Motion.

  MOTION

  

  FINAL CUT X

  

  Thank you.

  The values that you have published on the move have been compared to this project that you created. The values shown in FCPX are "consistent" with any project that you create. Often, you will see the center screen is 0.5, 0.5. Left and below are 0, right and up are 1.0. Or you could see Center of 0.0 and a range between - 0.5 and 0.5. Sometimes, you will see the numbers on the scale of some sort of percentage (vertical values will be 0-100 [%] and the horizontal will be based on the aspect of the project, for example, horizontal will be between 0 and 177.7778 for a project of 1920 x 1080, etc..) It will depend on the type of object and the parameters associated with what you posted.

  If you want to "correct" values in FCPX, you will probably need to rig settings, otherwise, just live with it.

  For what is * why * your model crashes FCPX, that will be another reason and not the difference in the numbers. So, can we get more information on the model?

  To use specific fonts?

  You publish alterations settings?

  Anything out of the ordinary?

• OfficeJet Pro 8600: message "problem with the printer or ink system.

  I replaced the magenta cartridge with a new cartridge genuine HP (end of warranty 2017/01), but now get a message "problem with the printer or the ink system.

  If I restore the old cartridge I get the message that it is empty, but all the other options of the printer are available.

  Online support does not give me any result of solution but suspect there may be a manufacturing error in the new cartridge.

  Does anyone else have this problem or advice?

  Hello
  
  Please click HEREto access the procedure which should solve the problem.

• Problem with the bluetooth on my mac

  Hello everyone,

  I am a french and I have a problem with the bluetooth on my mac. My Magic Mouse has been suddenly disconnected from my mac. So I decided to reconnect my mouse. But this time, I couldn't do that because my mac (I think) did not detect the mouse. I said 'I think' because I am trying to connect this mouse on my son's mac and mac knew the mouse: it's only a problem of my mac.

  I went on the 'system preferences' to see if my mac know my mouse again, but no. While my mouse is light and bluetooth enabled. I tried with another mouse and it's the same result.

  So, what can I do?

  Thanks for your help,

  Merry Christmas!

  Roland Matt

  See "your device is not recognized by your Mac" here:

  If your Apple wireless mouse, keyboard or trackpad doesn't work as expected - Apple Support

• HP 15 laptop: problem with the touchpad and the key "stuck."

  Hello!
   
  Last weekend, I have an irritating problem with my HP 15 laptop. Bought two years ago and upgrades to Windows 10 a year ago.
   
  First of all, my touchpad started to not work properly. It "freezes" and I can't use it until I click the ESC key, but it doesn't last and "freezes" again a few seconds later. Then, everytime I open a window where there is a text box (Start menu, edge browser, Control Panel, etc.), the number 5 is entered automatically and permanently, as if the button 5 has been blocked. I did a quick check and button 5 do not seem physically stuck.
   
  Yesterday, I restored the system to the factory settings, so I'm back to 8.1 for Windows and then upgraded to Windows 10. Everything seems to work fine, but this morning, the problem was back. Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.
   
  Thank you in advance for your help!

  Welcome to the HP support community @gouch3.

  I understand that you have a problem with the keyboard and the touchpad on your laptop from HP 15.

  Have you tried to use a keyboard external and mouse at all?

  Have you tried to go to Safe Mode to see if the problems persist in there?

  Have you tried to perform a material or forced reset Reset?

  Did you do a test of material?

  Have you updated your drivers?

  gouch3 wrote:

  ... Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.

  It could be a driver problem to be able to look at that for you, I need your model number. I wish I could give you an answer or not, but at this point without the troubleshooting results and the model number, it is difficult for me to say.

  I can say that if everything works in point 8.1 of Windows without problem, the driver TROUBLESHOOTING is a great place to start. Please try to follow these steps for the keyboard and the touchpad of troubleshooting:

  • Beginning
  • Search for Device Manager
  • Search results, open Device Manager.
  • Click on display
  • Show hidden devices.
  • Click the arrow next to keyboards.
  • Right click on the name of the keyboard device.
  • Select uninstall.
  • Continue deleting the names of devices in the category keyboards until the feature of all the names have been uninstalled.
  • Restart the laptop twice.

  Touchpad:

  • Type of research, "Device Manager."
  • Click on Device Manager,
  • Expand mice and other pointing devices.
  • Right click on the TouchPad,
  • Click on uninstall.
  • Restart the computer laptop twice,
  • Reinstall the TouchPad card.

  I found a document of troubleshooting for you to try also called Portable keyboard troubleshooting. Please be sure to follow the steps described in this document.

  The best document I have for TouchPad problems is the use and troubleshooting of the TouchPad and ClickPad document. 

  Here is a link to the HP Support Assistant, if you need it. Just download and run the application and it will help with the software and drivers that need to put up-to-date.

  This is a great question other clients may also be questioned. When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you want to show appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems. Could you please also provide your model number (How can I find my model number or product number?)

  Thank you!

• ThinkPad T510 problem with the CPU frequency

  Hello
  I was a problem with the CPU frequency - in DC or battery it works 1/2 frequency (1196 MHz), but when my thinkpad plugged and is with battery it works OK (2400 MHz).
  Do you have any suggestions how to solve this problem.

  ThinkPad T510 (4384) intel core i5, 6 GB of Ram.
  Thank you.
  Best regards Nikolay

  What your seeing is actually normal and a result of power management settings. When it is on battery, the reduced CPU clock speed to improve the battery life and only increases in speed if a program requires processing power (games, adobe photoshop, CAD, etc.). If you wish, you can disable this feature by setting the "maximum performance" option in the Lenovo power management program and get into the bios and disable "Intel Speedstep" and similar power options setting. I hope this helps.

  -Brian

• LabVIEW 2010 FPGA: problem with the mean and the variance Subvi

  The Subvi 'Average, Variance and standard deviation' seems to not work properly. The calculation of the average value is ok but std and variance are bad and the results change with representation in an unexpected way. Everyone knows about this problem? Is there a problem with the use of this function?

  Thank you

  Andrea

  Hello Andrea,

  Here is a test for the configuration of your VI (entered I16, 16 samples), saved in LabVIEW 2010 SP1 and the new Subvi. It is relatively simple to adapt it to other configurations, but it does not reconfigure several nodes and constants on the diagram. Let me know if it will work for you.

  Kind regards

  Jim

• Pavilion Elite HPE-170 t: problem with the new HP DH16D5S DVD ROM drive

  My office is a HP Pavilion Elite HPE-170 t.  I recently upgraded from Windows 7 to Windows 10.  I have two HP optical dirives, one is a writer, and the other is just a DVD ROM  Both have always worked perfectly with Windows 7.  After you have installed Windows 10 continuous burner work very well works correctly with autoplay.  However, the DVD - ROM, HP DH16D5S, immediately began using autoplay.  Actually the drive was not yet recognized as a drive when you view the drives in the file Explorer.  Finally, it would seem, sometimes taking also longer than 5 minutes or more before doing so and then would work very well.  I tried different types of media, including music CD, DVD video and DVD software with the same results.  I assumed that it was a problem with the drive, maybe a bad capacitor, etc., which was originally not start correctly.  So I ordered a new DH160D5S, but which seems to have been a waste of time and money, because it does exactly the same thing as the original.  I even changed the cables autour between it and the burner, but it made no difference.  The burner still works fine but not DVD ROM.  I tried to find a more recent driver for it, but had no chance.  I found on a Dell website for this drive which was an update of the firmware for Windows Vista and Windows 7, but not for Windows 10.  I advanced and downloaded, but when I tried to run, I got the message: "your system does not meet the minimum requirements for this update.  Update has been canceled. »

  I want to try a different brand of DVD ROM, but would have to buy one without knowing if it would help.

  Any help will be appreciated.

  Since I posted this message I discovered that there is a driver problem with this DVD ROM.  There's no driver available yet to make the drive compatible with Windows 10.  Since then, I returned the drive and replaced by another brand that is compatible with Windows 10.

• Problem with the module "Automation" in WindowsAzure

  Top: Problems with the module used "Automation" service "WindowsAzure.

  Hello!

  I really need your help to decide my problem of "Azure Automation". My boss has set a task for the 'Automation' module allows you to make a backup of Virtual Machines.

  To understand my problem, I do the next:

  1. describe the situation of all;

  2. describe the problems that appear in this situation;

  3. my conclusions.

  In addition, I am attaching the necessary information: my PS-scripts (from Windows and the automation of azure), log (with my notes) and screenshots (images with my notes) see file .rar Add_info (annex).

  1 description any situation

  For our development projects, we have several Virtual Machines on service cloud "WindowsAzure. We need to make backups of discs with Virtual Machines each week. Earlier, for this task, I used Windows PowerShell on my computer and my PS-script (see Ann 0 - VM (backup) of the WPS_snapshot). I created a new storage 'backupstor' and containing 'snaps-drive '. When I run PS-script with my computer, I have backup of disks virtual Machin in the container "snaps-disk", without problem.

  Now I have a new task "automatically make the process of creating backup of Virtual Machines (VM snapshots). I tried to use automation module (overview). Can I change my PS script for the 'Automation' module and create folders (see Ann 1 - records (make backups of virtual machines) _Azure_Automation).

  I need to make a backup of Virtual Machine 'bosard' in the cloud 'cloudnet. "Bosard" on the disc size ~ approximately 90 000 000 000 bytes (total size of the default drive size 127 GB/136 367 309 312 bytes)

  2. description of the problems that appear in this situation

  My steps:

  1. I start files to make a backup of Virtual Machine disk (see annex 1 - files (make backups of virtual machines) _Azure_Automation))

  2. it starts successfully and generate the name of backup 1 (blob) - snapshot-bosard - osdisk_07.10.2014_07h00m39s.vhd (see image 1 - start copy backup 1 and annex 2 - log file copy process)

  3. the process of backup copy 1 (blob) will...

  Problem 1:

  4. the process of backup copy 1 (see Appendix 2 - process log file copy) automatically stops and complete to copy the part 1/3 bytes copied 28311552000only. Important: The size of my virtual machine disk ~ on 90 000 000 000 bytes.  (Maximum possible) of total capacity of the disk where the Virtual Machine is used - 136 367 309 312 (127 GB). (See picture 2 - stop backup copy 1)

  5. I have Virtual size 1 backup - 28311552000bytes, when the size of my VM - 90 000 000 000 / 136 367 309 312 bytes.

  Problem 2:

  6. after the termination of the process automatically makes copy backup 1, records (see annex 1 - files (make backups of virtual machines) _Azure_Automation) automatically start (see picture 2 - stop backup copy 1) and folders automatically create new snapshot Backup 2 - name - bosard - osdisk_07.10.2014_07h31m33s.vhd (see annex 2 - process log file copy, image 3 - stop the copy backup 1 & Begin copy backup 2 and 5 - backupStore_Azure (process)of image)

  7. I pressed "stop" and stopped the process of copy and folders (picture 4 - I stopped the process of creating backup 2 & records). And how result I had size Backup 1 and 2 = 0 bytes (see image 6 - backupStore_Azure (I order records))

  Note:

  1 problem 1: the process of backup of virtual machine does not complete and stops automatically.

  2 problem 2: the process of creating new second backup starts automatically. And as a result, we do not have the backup of virtual machine, when I use the 'Automation '.

  3. my conclusions

  I think that:

  1. my PS script for Automation (files) is not correctly. Then I need your help, how to fix this.

  2 may be the module "Automation" is not working correctly. And the module 'Automation' needs repairs and settings.

  In addition, I am attaching the necessary information (see the Add_info (annex) .rar file):

  Ann WPS_snapshot 0 - VM (backup)

  Ann 1 - records (make backups of virtual machines) _Azure_Automation

  Ann 2 - log file copy process

  image 1 - start the copy backup 1

  image 2 - stop copy backup 1

  image 3 - stop copy backup 1 & Begin copy backup 2

  4. I stopped the image create backup processes 2 & records

  image 5 - backupStore_Azure (process)

  image 6 - backupStore_Azure (I order records)

  Thank you

  Kind regards

  Mikhail

  Hello

  You can get the assisted support from the following link on this point:.

  http://azure.Microsoft.com/en-us/support/options/

• Problem with the installation of the assembly please help

  I get this messege and he says that the problem is "Microsoft.VC90.CRT, version ="9.0.21022.8", publicKeyToken ="1fc8b3b9a1e18e3b"processorArchitecture ="x 86", type ="win32

  Please help me with this problem because I can not install programs or updates

  Hi killerinthesand,

  What version of Windows are you using?
  Please check this thread on the forum for Games for Windows.  It is a similar problem with the same error as yours.  Try the steps you propose to see one of them will help to solve your problem.  This is most likely a problem to produce a Games for Windows client.  Have you installed this recently too?

  http://forums.gamesforwindows.com/t/566.aspx

  Let us know the results, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with password reset link - "there is a temporary problem with the service. Please try again. If you continue to receive this message, try again later. »

  Hello, account Windows Live from my wife was hacked a week ago and has been used to send many spam emails. As a result, his account has been disabled or closed (we are not sure). Whenever she asks to reset a password and a link sent to a different e-mail account, when she clicked it gets this message 'there is a temporary problem with the service. Please try again. If you continue to receive this message, try again later. "She is tried repeatedly, but get the same message. Someone knows how to go beyond that, so she can recover her account? Thank you.

  Hello BBB34,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.