Problem with the unit (transparent mode)

Similar Questions

• Problem with the input query mode. FRM 41009, 40301

  Hi all
  
  I have a problem with the mode of input query. What can I say, I'm in the mode of input query, and I click on a button. I get the error THAT FRM-41009 displayed.
  
  Now, I've wanted handled. So I created a trigger of error in order to handle the error.
  
  IF ERR_CODE = 41009 THEN
  NULL;
  END IF;
  
  A problem is that when you use the null value, it will not terminate the mode of input query, and then I get frm-40301 error.
  
  Second, it's that I can't use exit_form in a trigger of the error.
  
  I am aware that I can press F4 to exit this mode, but I don't want to do whenever I'm sure I'll get the user complaints.
  
  Another solution would be to put the following code in the trigger when key pressed for each button in the form:
  
  If: system.mode = "ENTER-QUERY" then
  exit_form;
  end if;
  
  But I don't want to reproduce this code in my form.
  
  Please can you give me an idea how to handle this correctly?
  
  Thank you
  Michael
  
  PS: Version of the form = > ORACLE FORMS 10g (Forms [32 bit] Version 10.1.2.3.0)

  I have a problem with the mode of input query. What can I say, I'm in the mode of input query, and I click on a button. I get the error THAT FRM-41009 displayed.

  What is the code in the trigger of your button When-Button-Pressed (WBP)? Maybe you should check to see if the form is in the Mode query in your WBP rather than try and remove the error? In other words, eliminate error - do not delete it. :)

  If you want instead to remove the error, there is a technique to built-ins call restricted to a trigger that does not allow them. Do this by the use of a millisecond zero Timer. For example:

  /* Sample On-Error Trigger */
  DECLARE
    n_err_cd   NUMBER := ERROR_CODE;
    t_on_error TIMER;
    ZERO  NUMBER := 0;
  BEGIN
    IF ( n_err_cd = 41009 ) THEN
      /* Create Timer to execute Exit_Form() */
      /* to Cancel Query-Mode. */
      t_timer := Create_Timer('ON_ERROR', ZERO, NO_REPEAT);
    ELSE
      /* Handle all other errors here... */
    END IF;
  END;
  

  /* Sample When-Timer-Expired Trigger */
  DECLARE
    v_Timer  VARCHAR2(30);
  BEGIN
    v_timer := Get_Application_Property(TIMER_NAME);
  
    IF ( v_timer = 'ON_ERROR' ) THEN
      /* Notice, the timer name is case sensative! */
      Exit_Form;
    END IF;
  END; 
  

  I am aware that I can press F4 to exit this mode, but I don't want to do whenever I'm sure I'll get the user complaints.

  Well, it's just standard features of Oracle Forms. If you switch the Mode request form - you must run a query or cancel the query Mode! This is how it works. Your users need to understand that and accept it - just as they accept the functional also for other programs. ;) Another option would be to add a "Cancel request" button to your form and make it so it is enabled only when the form is placed in Query Mode. Just a thought...

  I personally prefer to prevent the occurrence of an error rather than remove the error. :)
  I hope this helps.
  Craig...

• Problem with the screen blend mode

  Hello

  I noticed that the screen on my Illlustrator a blend mode problem, he does not let the color when the shape is black...

  Here is a screen for the explanation:

  

  (overlay = screen in french)

  I don't understand what is happening... ID do something wrong?

  EDIT: I use Illustrator CC (2014)

  What document color mode?

  In CMYK mode, you might want to try a (very) rich black.

• problem with the away mode system

  problem with the system of mode in the bios but canoe away find it in bios to disable

  Mode absence in Windows Vista
  http://www.Microsoft.com/whdc/system/pnppwr/powermgmt/awaymode.mspx
  See the download link at the top right.

  Also:
  Open Control Panel, click "Power Options."
  There are 3 "power management" available:
  (1) balanced
  (2) power Saver
  (3) high-performance (see the supplementary schemes)

  Click "change plan" to the "Balanced" plan
  Then click "change advanced power settings".
  Scroll down and click on the + next to the "media settings", then click on the + sign next to the option "when sharing media.

  Finally change the "Setting" mode to one of the three choices: "Allow the computer to sleep", "prevent the idling to sleep" or "allow the computer to remote mode.

  In case you want to choose either #1 or #2.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Problems with the data connection

  Hello
  I bought a Z3 Compact Xperia on December 10, 2014. I live in Italy and I use Vodafone as my everyday.
  I got a SIM card replacement nano with LtE capabilities just to get the phone in the new fast network. The problem I encounter is that, since on January 13, 2015, I had some problems with the data in mode 3 G connection.
  So far, I used my phone normally, then I tried to send a text message with WhatsApp and phone stuck with the clock icon in the lower corner of the bubble of the message. I thought it was a temporary network problem but I'm not sure about this.
  I live in a small town where the coverage is really good, either in 3G and LTE. I tend to use the 3G because it uses less battery and it does not affect my 4G data plan.
  Th issue, it's that if I do a speedtest when I feel that network glitch I have a ping, but with very good download speeds up to 2000ms.
  The problem is that I believe that this is not a network problem because my mother has a phone HtC One S and runs vodafone without problem even when I'm having the glitch.
  I tried to reset the phone to factory settings, but it did not help.
  In LTE / 4G I do not experience this issue. In fact, I think if there is problem need a phone related software because the antenna works very well.
  If it doesn't I'll try to contact ad Vodsfone then I'll send my phone for the helpdesk if Vodafone tell me that the question is not on their network.

  Thanks in advance for your help.
  Simone

  It's pretty strange, double check the APN settings and contact EE in this regard.

• Updated to Lion - problems with the mode of the unit

  I've recently updated my iMac - 8 GB ram, 1 TB hd - manufactured 2010.

  I had a VM for pre-existing (Win XP Pro) that I had left my PC.  Although very well, I can use the virtual machine in stop mode, the unit was very buggy.  I lost control of the mouse, the screen redraws is a problem and copy / paste between the VM and the Lion are incompatible.

  I've upgraded to the latest version of VMware 3.1.13 - (sorry if this isn't the correct version number - but I've upgraded).

  Has anyone else had problems with the mode of the unit?

  VMWare has been notified of this issue and if so, is there no work around?

  Thanks for any help on this.

  You reinstall your VMware tools after upgrade to 3.1.3 Fusion?

  Go to the menu of Fusion, the Virtual Machine-> install VMware Tools, after completing the installation, restart your guest and see if the unit is very well.

• Mozilla is aware of the problem with protected in Flash Mode?

  Today I started to have problems to view integrated in Firefox 12 Flash content. I tried all the usual steps (for example to clear cache, disable extensions, update the plugin and then finally of this update to Firefox 13) but nothing worked.

  Then I found an Adobe forum which some contributors have experienced the same thing in the last days, and it seems to have had a problem with the Protected Mode in the latest version of the Flash player. I disabled this mode and everything now works perfectly again - so I thought I would bring it to your attention in case others have the same problem.

  The Adobe support article is here: http://forums.adobe.com/thread/1018071?tstart=0

  Hope you find it useful...

  Thank you, cor - el. Hope there is a fix before long, otherwise it doesn't seem to be that much interest in the application Adobe mode protected in the first place!

• Problems with the Display Mode target on end 2009 27 "iMac

  Used late 2009 iMac 27 "in the view target in conjunction with a Dell XPS tower with i7 processor, Windows 7 and the best graphics card I could afford at the time connected by HDMI to mini display port cable.  Worked well for years.  Set aside Dell for a few months and the update of the iMac to El Capitan OS 10.11.3.  Recently tried old setup with same Dell PC and was able to move from Mac to PC, but the PC screen resolution was at the lowest setting. I got an error message when enabling/disabling to PC who said there was a problem with the port causing mini display of the system back to the lowest resolution. Impossible to reset at a higher resolution.

  I tested the Dell PC on another monitor, and it works very well at higher resolution (2560 X 1440). Now, when I reconnected it to the iMac (which works fine), the screen becomes black.

  Is it possible that the operating system upgraded (El Capitan) is not compatible with the targets using mini display port Display Mode?  Any ideas?

  Use your iMac as a display with the target - Apple Support Display Mode , also consider having a bad cable or connection. Does not hurt to try different cables, they can and will the bad!

• Problem with the mode standby in Windows 7

  Hello friends,

  I have a big problem when Windows 7 updated itself. I have a laptop Toshiba Satellite L505D. When I close the lid, it will automatically 'sleep' mode. Unfortunately, the screen is black and the laptop is still in progress, I have to stop it and then turn. Is it a problem with the driver 'stack '? Please, help me :)

  >.. After Windows 7 update itself
  How to understand this?
  Have you installed the Windows updates or what?

  Have you tried to restore the OS using System Restore tool and check if the problem persists?

• Problems with the Guide of TV Media Centre in the United Kingdom for the new year?

  Since midnight January 1, no data are available for any channel in the guide, even though it says that it has successfully downloaded the latest announcements of guide. Does anyone else have this problem?

  I tried a new analysis for the services and set up the guide even once.
  P

  Hello PGreenhill,

  Please see the thread below because there was a problem with the program guide in the United Kingdom and Ireland. It must be corrected. If not, let us know.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Winapps/the-electronic-program-guide-EPG-for-Windows-Media/923cf081-0607-497d-889c-6424e8299213

  Check also that all your Windows updates are up-to-date.

  Thank you

  Marilyn

• Problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

  Am having problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200

  * original title - I'm having a problem *.

  You have the latest drivers?
  http://www.nvidia.com/page/support.html

  Aero - Windows 7 - How to troubleshoot problems with Aero

  (1) first of all, click on the Start button and type in Aero. Now, click on find and fix problems with transparency and other Visual effects of link.

  (2) a new Wizard dialog box opens. Make sure that you click Advanced to solve all problems automatically.

  (3) either the problem will be solved or not. If this isn't the case, you will get a list of items that are potential problems.

  (4) If you want to see more details about the problem, you can click View detailed information. This will give you a list of potential problems that have been verified and those that pose problems.

  If it does not---> click Start---> right click computer---> click Properties

  Click the link for 'Windows performance index' and then click 'rerun the assessment"to refresh your WEI score and try again.

  Note: If you have Windows 7 Starter, or if your system does not meet the requirements for Aero you will not be able to use Aero.

• Problems with the Tablet mode

  I have problems with the Tablet mode when the display on a shelf. If you visit the Web site on landscape, then everything fits perfectly on the screen however if you view on portrait then it does not. How to solve this?

  You must define a new braking point and design that matches the portrait view.

• Problems with the navigation links in EDIT mode in the Business Catalyst Muse sites.

  Has anyone else had problems with the navigation links / EDIT mode in sites Business Catalyst Muse?

  In EDIT mode, I can't use the list drop DOWN the SELECT DIRECTLY to go to another page or a link. The drafting of the text or label works, but to actually go to a /visit link a hard link is broken.

  

  Others have this problem as well.

  No work around?

  Thank you!

  I have the same problem! Contact BusinessCatalyst today taught me that it is a known bug and have Adobe Muse to fix! LiveChat ticket No. #159685

  When I launched the Web site in may 2015 everything worked well, but since the update of CC, this problem occurred.

  The tip of solution, I received the BC is to always use the navigation menu bar. This does not work for me because my client wants a menu of polaroid...

• HP 1350 printer peripheral will not stay in offline mode. Problems with the Wi - Fi driver

  Hi I have a Dell desktop with printer HP 1500 computer.  After printing several documents, the printer has gone offline.  Troubleshooting indicates the problem with the Wi - Fi driver.  The printer is connected to the computer makes a Wi - Fi connection has to do with it?  I have add a portable Wi - Fi system recently.

  Hi, Mt48,

  Is the printer a 1350 aio or deskjet 1500?  You have listed two different models.

  Windows operating system?

  To resolve this problem, perform the following steps:
  1. Right-click on the my computer icon and choose manage, then click Design Manager.
     In the currency Manager there will be the USB root hubs (there may be several USB root hubs) perform the following steps for all root hubs:
  2. Right click on the USB root hub and go to properties, then the power management and uncheck 'Allow the computer to turn off this legacy to save energy' in the Design Manager.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=UK&TaskID=110&prodSeriesId=439153&prodTypeId=18972&ObjectID=c01475742

  Monofunctional and multifunction printers - HP printer is offline message appears on the computer and the HP product does not print

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c02221706&lang=en&cc=us&TaskID=130&ContentType=SupportFAQ&prodSeriesId=306884&prodTypeId=18972

  Look for your version of Windows and select printing HP and the Scan Doctor - this is a diagnostic utility

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=306889&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=306884

• Qosmio G20 error message: problem with the cooling system has been detected

  I'm trying to fix a Qosmio G20 (which is about 3 years old, it is no longer in warranty).

  Error message: Warning: a problem with the cooling system has been detected.

  I managed to remove the outer case and observe the operation of the machine, and basically one of the fans does not at all. The fan which is closest to the power connector seems to work very well (he seems to be turning a lot, do not know if this is normal), but the other fan who does not seem to move at all.

  When I put in place the case and on the machine, I noticed after a few minutes the vent of the fan working heat sink had warm enough, while led the non-working fan remained cool.

  I cleaned the fan from dust and have also changed the BIOS battery mode mode high performance, but the problem still exists.

  I would be grateful if someone could give advice if the problem is the fan or something else.

  If the fan is the problem, where I can buy a: i live in the United Kingdom?

  Hello

  I think there might be something wrong with the cooling module and the replacement would be necessary.
  Usually, this should be done by an authorized provider (ASP) in your country.

  Technicians could replace it with a new part and also could renew the thermal grease which is placed between the module and the CPU cooling.

  So contact the ASP in your country and ask for later handling.

  By the way; also, you can buy the cooling of the ASP module!

  Good luck