Problem with serial key when printing to PDF format

Similar Questions

• problem with the colors when printing to PDF in FM9

  Hello

  We have some problems with printing to PDF with FM9 colors.

  FM document files eps (1) with a green box and (2) a rectangle created with the tools chart FM, filled with the same values of color green (91/0/60/44)

  In FrameMaker both colors is really different, but too bad, in the PDF color (eps) and the rectangle obtained the same correct green color.

  OK, him differed in creation, so they were CMYK and RGB, but your printing coming.

  Now in FM 9:

  (1) if I do a "save as PDF" and turn off "convert to CMYK in RGB" resulting PDF is the same from FM8 (correct)

  (2) if I print to PDF via distiller and set job options for "convert all colors to CMYK" resulting rectangle Green is very different from the greenery of the eps.

  I tried different options, the best result was "convert all colors to CMYK", the other options just very more ugly.

  Does anyone of you know a solution to your problem? The help is very appreciated. I could send examples of files if necessary.

  Thanks in advance.

  PK

  PK - ulm wrote:

  But we want to use the option to print using the Distiller.

  PIA,

  This sentence needs some explanation, I think. Why you want to use the print option?

  Using the print option,-you're always going the same route that FrameMaker Win has always been, that uses the postscript RGB driver only Windows. Now with FM9, you have the possibility to get CMYK directly to PDF, as defined, without any color conversion. And it * is * works, as long as you limit your documents CMYK or spot from the FM library.

  So, once again: why do you want to use the print option?

  On a sidenote: I do not know if I interpret your username correctly, but if you are able to understand German, you will find some tests deep color manufactured FM9 here: http://www.hilfdirselbst.ch/foren/FM_9_und_Farben_in_PDFs___getestet_P387800.html

  Bernd

• Column width set to 0 when printing to PDF format

  Oracle Application Express Version: 4.2.0.00.27

  Apex listener Version: 2.0

  We have a classic report with 20 columns. Out of them, few are conditional.

  We use attributes of the print to print the report in PDF format. The problem with the PDF and printed, it keeps the column width of all the columns in the PDF file, even if they are hidden. We put the column width for all columns of 20 in the print attributes section.

  Can we set the column width to 0 in the PDF output for columns that have hidden due to the State?

  HI - so what you are trying to accomplish? The conditional columns are not included in the PDF file. And the column width for the PDF file is set as a percentage of the available space. So I guess that what you need is for the remaining columns, i.e. those who are included, to fill the available space, but is not because even if the conditional columns are not displayed, they still use place. Unfortunately, there is currently no way to conditionally set the column width, or update the width of the columns according to the conditions. You can try your own custom report layout, or use the APIs of printing for export and under certain conditions using different presentations.

  I'll take a good score to see if we can improve the logic using the layouts of integrated report to be a little smarter on the use of space when the columns are excluded under certain conditions.

  Kind regards
  Marc

• Save location by default when printing to PDF format

  Hi all!

  I'm working on a remote server with r2 Windows Server 2012 and when I print the format PDF Adobe prompt me where I want to save my file the default location is drive c. server that I am connected.

  Is there a way I can change the default location to a specific folder on the C drive of my local computer and not the server?

  Hi djvaldes21,

  You can select a folder where default Acrobat will save all files when convert you to PDF using Adobe PDF printer.

  To do this, open the printer Adobe PDF Preferences and change the location of the folder desired under the label 'from Adobe PDF output folder. Click Browse to add or change the output folder.

  Hope that helps.

  Kind regards

  Ana Maria

• Lines/undesirable traits around object when printing to PDF format

  Hi all

  When I place a document in Adobe Indesign CS3 it seems perfect on the screen.

  But when I print to PDF in the PDF file, most of the objects show the wrinkles around them.

  Of course, I put the race to '0' and color 'None '. The traits do not arise in Indesign and not when printing to printer directly.

  But when I save it as a PDF there are all of a sudden these traits in the PDF file.

  The features appear on Indesign (example oval and text objects) objects, on inserted EPS, TIFF, PNG, and GIF.

  Can someone tell me what what should I do to prevent these features around the display of the PDF object, printed Indesign?

  Thank you in advance, I appreciate all help.

  Best,

  JP

  The white lines are called artifact sewing flattening transparency. Instead print format PDF, EXPORT to PDF format and using Acrobat 5 or greater compatibility, who will be leaving the live transparency and eliminate stitching artifacts.

• Problem with automatic charger when printing with photo paper

  Hello

  Printing is fine EXCEPT when I try to print photos on paper HP Advanced.  I set it up to print several photos of different size on 8 1/2 x 11 via a software program.  I've never had a problem in the past.  Paper just sits there and do not feed, and finally pushes through with nothing printed.  Or if I push forward to get through, it is not aligned correctly as don't feed properly in order not to print the part of photos.  If all goes well, I'm explaining this to as you can understand the problem.

  Basically, there is a problem automatically feeding paper photo, even if I use high-quality paper.

  Can someone help, please?

  HP Photosmart C4795

  HP Presario Desktop, Windows XP SP3

  Thank you

  Gail

  You change the paper type in the print settings to reflect the paper chosen for the print job? Pages 22 - 23 has this process listed in the user manual if one any showing this post wants to look.

  I reset the printer, clean the rollers, check the print settings. This document here describes the steps to follow. I know that you do not get a hard copy of the error message, but the steps are the same for your problem to feed paper. I hope this helps.

• Problems with the addition of signature in PDF format field

  Hello

  Hope someone here can help please. I have a PDF document and I would like to add stamps 'Initial here' and 'Sign here', showing where people need to sign or initial.  When I go to the screen to do that, I get a message saying , there was a system error. Please try again later.   How can I solve the error please?  I have tried for weeks and have failed to use the stamp feature yet.

  I would also like to be able to highlight and sticky notes, which I am not at the moment.

  Examples below

  

  

  Thank you

  Hi orangeapples,

  I would like to inform you that Acrobat Reader is a free service.

  You will not be able to add fields of signature or send it for signing using the Adobe Reader application.

  You'll need subscription sign Adobe for this. Please see the following link for more information:

  • eSign and approve documents, signatures online | Adobe Document Cloud
  • Adobe sign FAQ

  https://helpx.Adobe.com/sign/FAQ.html Kind regards

  Meenakshi

• PDF not always opens I have Adobe Reader DC when printing a PDF printer

  PDF does not open always in Adobe Reader MS when printing a PDF printer. (Version 2015.009.20079)

  It seems that the question is more common when CD is opened in the first place.

  Turn off the display tabbed does not help.

  This happening in our environment Citrix using Xenapp 6.5 on Windows server 2008 R2 when printing from Adobe PDF, PDFCreator, or another tool to print PDF.

  Best regards

  Morten

  It seems that there is a problem with the RdrCEF.exe file. When you rename the file solves the problem.

• A word or phrase moves when printing to PDF

  Why, when printing to PDF from another format (such as Word) the odd time a column or a Word will move out of alignment?

  I did the same steps to 14 Word files. 8 of them at the date of the section "Normal retirement Date" moved to the right as shown below.

  The others were very good. The numbers and date, in the right-hand column are all tabed on without space.

  This happens very rarely.

  Thanks for your help.

  

  It is a problem with the Microsoft Office applications since the beginning of the 1990s, believe it or not. Whenever you change the destination output device, Office applications will reformat your document based on the measurements of fonts to the resolution of the printer device. You can see the misaligned line endings changed tabs and pagination anomalies! There is absolutely nothing Adobe can do about it.

  For example, if your default printer is set to print at 600 dpi, and the instance of Adobe PDF PostScript printer driver is set to 1200 dpi, expect reflow issues.

  There are two workaround solutions. If you insist on printing at the instance of Adobe's PostScript of PDF printer driver to create PDF from applications Office, set the Adobe PDF printer as the default printer before entering the Office application and still print via the production of PDF. More likely, which will ensure consistency in the layout.

  That being said, creating PDF via PostScript distillation (i.e., printing to the Adobe PDF, PostScript printer driver instance) is absolutely not the recommended way to produce PDF from Microsoft Office with Windows applications. Acrobat installs a PDFMaker factory (an Acrobat tab with a function to create a PDF file as well as a Save as Adobe PDF from the home view) in these applications that creates PDFS directly, without any stink'in GDI and intermediate PostScript and tends to provide provision more consistent with what you see on the screen at once. It also preserves image and dynamic transparency color spaces. The only thing that does not support the PDFMaker are all .eps graphics inserted in your Office documents (something rarely used in modern times).

  We'll know if that helps you.

  -Dov

• Pavilion 15-e070sl: problem with the key "cancelled."

  Hi guys,.

  I have some problems with the key "cancelled." It does not work for a few months. But the more serious problem is that sometimes when I double click on a file or a folder with my mouse compares the window cancellation asking me to confirm moving the file to the trash. This window disappears until I have restart the system. He thus annoyng. It seems that the key 'cancelled' suddenly to work again when I double click on something.

  I hope you find a solution

  With the availability!

  Hi @MichaelMazz ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion Notebook 15-e070sl and the keys does not properly.  Select an on-screen keyboard layout using this document , as this could be the problem.

  If this is not enough, try this document on troubleshooting the keyboard. You can watch the laptop marked key stuck section.

  Here is a link to uninstall the keyboard. Restart the computer after the uninstall, it must be reinstalled automatically.

  Have you tried to clean the key or use air to blow the key there could be debris in the key itself?

  I hope this helps.

  Thank you.

• Problem with his comments before signing the PDF.

  Problem with his comments before signing the PDF.

  My problem is with sticky notes that I need to use my comments frequently.

  When I place my signature and save document commented, disappear all pop-up windows and icons of sticky notes go "flat" of the document.

  It's the same with all the annotation tools and pop ups disappear if I use them with.

  Is there a way to keep comments and pop-ups 'living' signing and recording after his comments?

  Fig 1: commented the document before you sign and save.

  

  Photo 2: after you save the signed document. Pop - ups disappeared and sticky notes are here to stay.

  

  Hey Tomi,

  It was a typo on the part of Ajlan. It was supposed to read "Lock after signing the Document. Please see the screenshot below. However, this check box only appears in the dialog box sign the Document If you sign the last signature on the PDF field. If you don't, it's because there are other unsigned signature fields.

  Steve

  

• I have fonts made it difficult to Web pages when printing to PDF.

  I have fonts made it difficult to Web pages when printing to PDF.  It wasn't a problem until today.  I provided a solution through Adobe Chat, uncheck in the preferences, "rely on system fonts only; do not use document fonts. "However, I am still confused that I have not previously.  Any suggestions?

  This is your best solution.

  It can and must be set as the default for printing (Adobe PDF)

  Control Panel > printers > printer > properties > advanced (?)

  Set it and forget it. I would also go to change the default setting in other than Standard or smallest file size

• my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  My iphone 6 has started having the same problem. Its literally the GPS. Saying that it does not find me at all. Ive seen say location for more than an hour in the suburbs of chicago. It started to happen to me after I downloaded the latest update for the iphone. I hope they react and let you know what is happening because I'm dying to know as well.

• SideWinder X 6 problems with certain keys

  Hey, I have a new sidewinder x 6 and it was send me problems with some keys. Whenver I want to press 'e' or 'v' (and perhaps others, but those are the ones that I noticed to be more frequent) I sometimes have to press several times on it or it will not be saved.  This problem started yesterday and its getting boring.

  I love my Sidewinder and I wouldn't go back to a normal keyboard
  Please any ideas would help!

  LD49,
  I know you said that you used canned air to blow out the keyboard, but have you tried turning upside down and tapping gently on the bottom to see if something grave?  The keys you are having issues with that are all in the same general area of the keyboard, for the most part using the same finger to activate.  You might have something like a trombone, a small piece of paper, or whatever it be as incorporated under the keys.  Or is it possible that something sticky might have gotten there from your hands like a few drops of soda or candy?  Which might make the keys stick.  You can take some cotton pads with a small amount of alcohol on them and clean between the keys to see if they are stuck together.

  Other than that, you can try unplugging the keyboard and plugging, reload the driver and checking all macros that can be assigned to these keys.

  Also, check the keyboard settings in the control panel and play with the repeat delay and speed to see if that will solve your problem of repetition.

  Let us know if you need help.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is anyone else having problems with Windows 8 when your typing and e-mail? For some reason, it comes out constantly to the tile screen while I type making me about starting more.

  Is anyone else having problems with Windows 8 when your typing and e-mail? For some reason, it comes out constantly to the tile screen while I type making me about starting more.

  Hi Chaz,

  I thank you for your message and gives us a chance to help you. I see that the Mail app closes while you are typing an email.

  Please answer these questions to get a better understanding of the issue.
  1 have changes made to your computer before this problem?
  2 shut down other applications while they are in use?
  3. do you get an error code?

  You can try these methods to check whether the problem is resolved.

  Method 1: Run the troubleshooter of app.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Open this link to launch the troubleshooter.

  Method 2: Update the application.

  Method 3: Reinstall the application.

  This link has the steps that you can follow to update and reinstall the application.

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Feel free to use the forum for any other issue of Windows, you may have.