Problem with setting up VI SDK

Similar Questions

• Problem with setting window of acquisition on 1429 PCIe capture card

  Hi all

  Recently, I am using the Basler A504k camera with card PCIe-1429 of goodwill for the acquisition of images at high speed. I found problems with setting the acquisition window in the capture card using Measurement & Automation Explorer.

  1. for example, if the size of the original image is 1280 * 500, if I put the window of acquisition with left 0 and width 1280, everything is OK, but if I set the width to 1279, there will be an error (error 0xBFF6002C FIFO overflow caused the acquisition of stop), if I set the width multiple of 8, there was no error. Could someone tell me why in this case, is it because the packet data transfer for acquisition card rule?

  2. the window of acquisition is set according to the camera image, right? If the camera has also a function of area of interest, the acquisition window setting is always the image coming from the camera.

  Attachment is my setting a MAX software.

  Thank you very much

  Hi xiaochunfly,

  My bet is 1280 pixels image size is aligned on 32 bytes, and the material may actually go from line to line without breaking the transfers. With the width of the non-aligned countries, he needs to start a new transfer on each line, and this has an additional load on the PCIe bus and the system memory bus. Currently infrastructure IMAQ trying to adjust to any size of border/size possible image regardless of efficiency, it take the material and changes in recent processor Intel chipsets have reduced effectiveness with system memory bus performs under these conditions. So, you can get much better performance if you use line widths. You can also get the latest IMAQ driver because there was changes in the latest few transfer more effective under some of these conditions.

  AOI is usually under the framegrabber. If you reduce the AOI who sends the camera, it seems often identical to the framegrabber as if you just had a camera with a smaller sensor. Thus, your AOI in IMAQ must be set to the size of that the camera is sending, unless for some reason you want to capture less of what the camera is able to set up on its own.

  Eric

• I have problems with setting up my Gmail in my room light 6 mL, where do you think I could get help for this?

  I have problems with setting up my Gmail in my room light 6 mL, where do you think I could get help for this?

  Hi kikikilala,

  Please explain the problem you are oriented connect Gmail with Lightroom

  Try reauthorizing your Gmail account once in Lightroom and see if that helps.

  Refer to Validation of Gmail failure

  Kind regards

  Assani

• Problems with setting up JDeveloper and MAF with android SDK

  I finished installing Jdeveloper studio edition and downloaded the Android SDK. When I try to install the Android SDK with Jdeveloper, I get the following error...

  java.lang.RuntimeException: XPathFactory #newInstance () cannot create an XPathFactory for the default object model: http://Java.Sun.com/JAXP/XPath/DOM with the XPathFactoryConfigurationException: javax.xml.xpath.XPathFactoryConfigurationException: java.util.ServiceConfigurationError: javax.xml.xpath.XPathFactory: weblogic.xml.jaxp.RegistryXPathFactory provider not found

  
  

  

  
  

  Please help me in fixing this problem.

  
  

  Thank you

  Aerts.
  

  Arun, I tried. Does not resolve the issue. I moved all records related to the generic installation jdeveloper and JDK 8 to the trash and then started editing studio of jdeveloper, then he asked for the location of the JDK. When entered the path to the JDK 7, everything has worked well.

  Thanks for all the help.

  AB.

• Problem with setting icon of FDTS IDE

  Hello

  I was using Adobe Flash Builder IDE to create applications for Tablet Blackberry using Adobe AIR. Currently, I had spent in FDTS IDE based on the details that are on the bb site (). I tried to create apps for the two BB tablet as well regarding BB 10. I followed the same path that we follow in Adobe Flash Builder. But when running the unit or the Simulator, he demonstrated error 'unknown resource '. But the same folder structure, classes, images work properly in Flash Builder.

  Please someone help me solve this problem.

  Thanks in advance

  Vineeth K

  Hello

  I had found the solution for this.

  It was since then, seven windows laptop is to have two Admin & Normal user accounts. The Normal user, I used the IDE FDTS, for security reasons. And FDTS IDE, AIR SDK, Flex SDK, and BB 10 SDK were inside C:\Program Files (x 86) \Research In Motion\. It was the question. I had found that for many software blackberry and related drivers are required to be installed directly on the C drive for better use. I had tried that and found that the setting icon errors are resolved.

  Note: Do not related Blackberry software install in Program Files / Program Files (x 86) in Windows. It can be in any folder inside C (the drive in which Windows is installed), example, C:\Blackberry.

  And now FDTS turns out to be almost fine.

  Thank you & best regards

  Vineeth K.

• Conditional text in Table - problems with setting the line height

  Hey there,

  I'm German, but I try to express my problem in English as I can. Not always easy with different menu names. Hope you get what I mean! :-)

  As you can see in my attached screenshot, I placed the text in a table.

  Text height is set: minimum 1.5... so it adapts to the amount of text.

  That's what I want - it should adjust the height of the conditional text marked/s.

  It always adjusts the height when I blind on the first line lines oder between (for example line 2 + 3 4).

  But if I want to blind on the last lines, there is a number at the end and an extra empty line with #.

  I know the # means hidden following text, but why it works with the red/green text.

  There are also some hidden text (green), but the brand # is just after the last word - not in a new line.

  Does anyone have a solution for this?

  Thanks in advance!

  

  So far, it's ok. A sign of the end of a text paragraph forces a new line.

  To change, do the following:

  For each condition, you need another condition for the paragraph sign that comes immediately after the condition. Not after each paragraph of a condition, but at the end of each consecutive numbers of the paragraphs of the same condition.

  So in your third example you will need more of two conditions:

  1. one for the paragraph at the end of the condition «meaasurements» sign

  2. one for the sign of paragraph at the end of the condition 'price 2 '.

  Whenever you perform other invisible conditions, you must also disable the new conditions that sign a single control paragraph.

  See the following screenshots:

  

  

  

  

  Uwe

• Problem with setting ringtones Favorites/contact

  Hi, I have the new Moto G and WhatsApp is installed. Now, whenever I put a ringtone for contacts who are _not on WhatsApp, parameter never gets recorded, it goes back up to the default ringtone. Same thing with the Favorites - mark the contact as a favorite, it immediately passes to favorite no and my action is canceled. These work only for contacts of WhatsApp.

  Is this a known problem, how can I fix? Thank you

  Thanks AlphaDog. I used standard ringtones. I did a reset factory and lo, it now works fine. If all goes well he will not be in bad state to soon he again. Thanks for the help.
  
  When I got to the phone, it prompted me to do a system update. But he did not after the reset... Do not know why.

• Problem with setting "Horizontal scrolling with tilt wheel"

  All of a sudden, everytime I open a spreadsheet it acts as if I am pressing the arrow button to the right and the active cell moves to the right as quickly as possible.

  At the same time:
  1. my wireless Microsoft mouse leave with the scroll wheel.
  2. when I click a down arrow, the menu is displayed for a split second, then disappears.
  Any ideas what may have caused this?
  * original title - Excel-unstoppable to the right at the opening of automatic pagination

  1 only with Excel

  2 Microsoft 6000v2.0
  3. since Monday morning, when I opened a spreadsheet
  4. the system changes. I didn't touch anything.
  5. the keyboard is clear. It only happens in Excel.
  I managed to do stop by disabling "horizontal scrolling with tilt wheel" in the mouse properties. Absolutely, I know for a fact that nobody changed this setting, but it became somehow activated.

• Windows Mail problem with setting up a new email address

  I have a Gateway with Windows Vista Home Premium laptop. I have an email account already set up in Windows Mail that works very well. I try to add another e-mail account. In windows Mail I click Tools, accounts and then select Add. then the email account selected. I went and set up the pop server and smtp server correctly, but for some reason I can't access this email account. I have double and even triple to verify the password. I must be overlooking something, but I just can't understand what it is. Can someone help me please. I can't really find any reason why it does not work. I'm not a newbie and know my way around the computer well enough. But I am confused.

  Charter.NET parameters are real simple...

  Incoming server POP: pop.charter.net

  Outgoing SMTP server: smtp.chater.net

  Here is the link:

  http://www.Charter.com/customers/support.aspx?supportarticleid=1781

  t-4-2

• SONY NEX 5 - problem with setting of the shutter speed shutter priority mode

  Hello

  I strictly followed the instructions in the manual, but when I'm in the mode S (shutter priority mode), by the rotation of the wheel there is no change in the shutter speed and I don't know why.

  On the screen, above the wheel icon is written Tv.

  Please, advice me how to solve the problem. In that I'm wrong.

  The same situation that I have and with the Apperture mode.

  Thank you!

  HI ILesishki,

  I apologize for the inconvenience that was done to you. Let me see if I can help. I suggest the initialization of the device to its default settings to solve the problem. Just click on the Menu button, then choose Setup. Go to main settings and look for reset default. After the reset, turn the camera and see if the problem is still there.

  If so, I suggest to send the camera in for service. I recommend that you visit our Sony Global Web site for more information on contacting the Sony's Support centre in your area to http://www.sony.net/SonyInfo/Support/.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• Problem with AdvancedDataGrid in Flex SDK 3.3

  Hello Forum,

  I downloaded and installed Flex SDK 3.3. Once I did my environment for the 3.3 SDK compiler complained that he cannot find the AdvancedDataGrid component in the path. After some research, I was able to solve this problem by downloading Flex 3.3 Data Visualization Components of http://www.adobe.com/products/flex/flexdownloads/. Then I had to unzip the file downloaded in the /sdk_3.3.0_install_dir/

  I don't think that I had to go through that in my previous installations - 3.2 and 3.1. No one knows the reason for this step both download and installation?

  Also, I would use a new class of vector in my future development, anyone know what version of the SDK it provides?

  Much appreciated,

  Mike

  Hi Mike, the two-step process is because the AdvancedDataGrid and graphic elements are not part of the Flex SDK, they are additional components that come along Flex Builder 3 Pro

• problem with setting of the child fields

  Hi all

  I use this code for jde4.7. I'll have the field two custom bitmap and I stand ready on the other plain bitmap. in order to be simple, I just now targeting code to display the two bitmap using custom Manager, but it shows nothing. It's displaying empty me. Here is my custom handler code...

  HorizontalFieldManager hfm = new HorizontalFieldManager()
  {
      public void add(Field field)
      {
          this.add(_item1);//_item1 & _item2 is bustom bitmap field
          this.add(_item2);
      }
  
      protected void sublayout(int maxWidth, int maxHeight)
      {
          maxWidth =  Display.getWidth();
          maxHeight = Display.getHeight();
  
          System.out.println("In sublayout");
          System.out.println("Max Width "+maxWidth);//360
          System.out.println("Max Height "+maxHeight);//480
  
          int count = getFieldCount();//2
          Field field;
          System.out.println("Count "+count);
          for (int i = 0; i < count; i++)
          {
          field = getField(i);                        layoutChild(field,field.getWidth(),field.getHeight());
          setPositionChild(field, 50, 50);                    }
      }
  };
  this.add(hfm);
  

  He shows me the vacuum.

  but when I simply add

  Add (_item1);

  Add (_item2);

  He shows me the image.

  also, I want to add more to a bimap to specific position.

  As I mentioned above, the ways to use a picture as a background and putting fields on top of the background image are discussed in a number of other Threads.  The 'trick' is that the background image is not added as a BitmapField, it is painted directly on the screen, usually using paintBackground.  But the search for other Threads dealing with this - if you can't think in terms of research, try 'background image'.

• Problem with setting of resources.

  I can't get this to work... For me... It looks good, but I thought I'd let the Lords of ps look over and let me know what they discover...

  $vcs = to connect-VIServer 'VC - 25"- user" "-password $Password

  Get - VM "TESTDPLY-VT01" | Get-View | % {

  $spec = new-object VMware.Vim.VirtualMachineConfigSpec

  $spec.cpuAllocation = new-Object VMware.Vim.ResourceAllocationInfo

  $spec.cpuAllocation.Shares = new-Object VMware.Vim.SharesInfo

  $spec.cpuAllocation.Shares.Level = 'normal '.

  $spec. CpuAllocation.Reservation = "20".

  $spec.cpuAllocation.Limit = "5000".

  $spec. MemoryAllocation = New-Object VMware.Vim.ResourceAllocationInfo

  $spec. MemoryAllocation.Shares = New-Object VMware.Vim.SharesInfo

  $spec. MemoryAllocation.Shares.Level = 'normal '.

  $spec. MemoryAllocation.Reservation = '512 '.

  $spec. MemoryAllocation.Limit = - 1

  $_. ReconfigVM_Task ($spec)

  }

  This is the error I get.  The error does not appear in PG it appears in the recent VC server tasks:

  Reconfigure Virtual Machine - a PARTICULAR setting was not correct spec.memoryallocation.Reservation.

  Thank you guys!

  Glen

  If you have allocated less than 512 MB of memory for the guest?

  The reservation must be between 0 and the amount of memory (in MB) that you have allocated to the guest.

• Problems with speed of Pre adjustment knobs

  I have a problem with setting new calls abbreviated after the last update1.3.5.1. Since the last update I can't put a new speed dials. I go to the contacts app, select the contact that I want to put a speed dial. After you select this contact I tap the top left corner labeled contacts and select Set Speed Dial. After selecting this option, he brings me to a list of screen all possible short calls available and used. This doesn't happen and has not happened since the last update. Can someone tell me what could be wrong.

  I understood why my speed dials were broken (name and number with a white screen when you try to assign a speed dial).
  
  http://forums.precentral.NET/Palm-pre/234852-i-fixed-my-broken-speed-dial-issue-1-4-couldn ' t-game-speed - dials.html #post2285700

• Problem with utl_smtp

  
  Hi all

  I am facing a problem with setting using utl_smtp, question is file BLOB does not as an attachment by e-mail to place the content of the BLOB is embedded in the body of the email. Here are my exact requirement:

  (1) send emails with UTL_SMTP

  (2) get the BLOB of the fnd_lobs for a sales order table and fix it with the emai

  The above obligation, email is going very well for me, the only question I face is with an attachment. Here is the code I use for this requirement:

  -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  DECLARE

  LONG l_to_list;

  l_date VARCHAR2 (255) DEFAULT TO_CHAR (SYSDATE, "dd my hh24:mi:ss yy");

  l_crlf VARCHAR2 (2): = CHR (13) | CHR (10);

  l_profile_value VARCHAR2 (300);

  l_from_profile_value VARCHAR2 (300);

  l_mailhost VARCHAR2 (300);

  l_lemail2 VARCHAR2 (2000);

  l_dlimiter_cnt NUMBER (10): = 0;

  l_lemail_adr VARCHAR2 (2000);

  l_strnl NUMBER: = 0;

  l_emailids VARCHAR2 (1000);

  l_emailid VARCHAR2 (1000);

  l_user_id NUMBER;

  l_resp_id NUMBER;

  l_resp_appl_id NUMBER;

  l_dup_email_exist_cnt NUMBER;

  l_recipients VARCHAR2 (4000);

  l_subject VARCHAR2 (4000): = 'this is a Test Email ";

  l_html_content VARCHAR2 (1): = 'n';

  l_mail_conn UTL_SMTP.connection;

  l_email_addr VARCHAR2 (50): ='[email protected] ';

  l_content VARCHAR2 (1000): = 'Test Email ';

  g_crlf CHAR (2) DEFAULT CHR (13) | CHR (10);

  l_bcc VARCHAR2 (50): ='[email protected] ';

  v_raw raw (57);

  V_LENGTH INTEGER: = 0;

  v_buffer_size INTEGER: = 57;

  v_offset INTEGER: = 1;

  l_attach_blob BLOB;

  p_filename VARCHAR2 (50): = "QUOTE_REPORT_11122113.pdf";

  MAX_BASE64_LINE_WIDTH CONSTANT PLS_INTEGER: = 76 / 4 3;

  i                     NUMBER               :=1;

  l_boundary VARCHAR2 (50): = '-= * #abc1234321cba #* =';

  l_step PLS_INTEGER: = 24573;

  l_length PLS_INTEGER;

  l_begin PLS_INTEGER: = 1;

  l_buffer_size INTEGER: = 75;

  l_raw RAW (32767).

  BEGIN

  SELECT file_data

  IN l_attach_blob

  OF fnd_lobs

  WHERE file_id = 1016452;

  dbms_output.put_line ('Content of msg is' | l_content);

  --==========================================================

  -Assiginh the host dynamically through profile name

  --==========================================================

  l_profile_value: = fnd_profile. VALUE ("GLOBAL_HOST_NAME");

  dbms_output.put_line ('hostname' | l_profile_value);

  l_mailhost: = l_profile_value;

  dbms_output.put_line ('hostname' | l_mailhost);

  --==========================================================

  -Assiginh profile dynamically through the email address

  --==========================================================

  l_from_profile_value: = fnd_profile. VALUE ("FROM_PROFILE");

  dbms_output.put_line ('hostname' | l_from_profile_value);

  --=================================================================

  -Based on the e-mail profile process global value launch UTL_SMTP

  --=================================================================

  l_mail_conn: = UTL_SMTP.open_connection (l_mailhost, 25);

  UTL_SMTP. HELO (l_mail_conn, l_mailhost);

  UTL_SMTP.mail (l_mail_conn, l_from_profile_value);

  UTL_SMTP. RCPT (l_mail_conn, l_email_addr);

  UTL_SMTP. RCPT (l_mail_conn, l_bcc);

  -l_to_list: = ' from: '. l_email_addr;

  UTL_SMTP.open_data (l_mail_conn);

  UTL_SMTP.write_data (l_mail_conn, ' Date: ' |) TO_CHAR (SYSDATE, ' ' DD-MON-YYYY HH24:MI:SS) | UTL_TCP. CRLF);

  UTL_SMTP.write_data (l_mail_conn, ' from: ' | l_email_addr |) UTL_TCP. CRLF);

  UTL_SMTP.write_data (l_mail_conn, ' from: ' | l_from_profile_value |) UTL_TCP. CRLF);

  UTL_SMTP.write_data (l_mail_conn, ' BCC: ' | l_bcc |) UTL_TCP. CRLF);

  UTL_SMTP.write_data (l_mail_conn, ' subject: ' | l_subject |) UTL_TCP. CRLF);

  UTL_SMTP.write_data (l_mail_conn, ' Reply-To: ' | l_from_profile_value |) UTL_TCP. CRLF. UTL_TCP. CRLF);

  UTL_SMTP.write_data (l_mail_conn, l_content |) UTL_TCP. CRLF. UTL_TCP. CRLF);

  -UTL_SMTP.write_data (l_mail_conn, ' Content-Type: ': ' text/plain "|") UTL_TCP. CRLF);

  UTL_SMTP.write_data (l_mail_conn, ' Content-Disposition: attachment ;'||) UTL_TCP. CRLF |' filename = ' test po.pdf"' | UTL_TCP. CRLF);

  UTL_SMTP.write_data (l_mail_conn, "Content-Transfer-Encoding: base64' |") UTL_TCP. CRLF);

  l_length: = dbms_lob.getlength (l_attach_blob);

  l_begin: = 1;

  l_raw: = NULL;

  l_buffer_size: = 75;

  All IN l_begin < l_length

  LOOP

  DBMS_LOB. Read (l_attach_blob, l_buffer_size, l_begin, l_raw);

  UTL_SMTP.write_raw_data (l_mail_conn, utl_encode.base64_encode (l_raw));

  UTL_SMTP.write_data (l_mail_conn, utl_tcp.crlf);

  l_begin: = l_begin + l_buffer_size;

  END LOOP;

  UTL_SMTP.write_data (l_mail_conn, UTL_TCP.crlf |) UTL_TCP. CRLF);

  UTL_SMTP.write_data (l_mail_conn, '-' | l_boundary |) '--' || UTL_TCP. CRLF);

  UTL_SMTP.write_data (l_mail_conn, utl_tcp.crlf);

  UTL_SMTP.close_data (l_mail_conn);

  UTL_SMTP. Quit (l_mail_conn);

  EXCEPTION

  WHILE OTHERS THEN

  dbms_output.put_line ('Exception occurred' |) SQLERRM);

  END;

  ----------------------------------------------------------------------------------

  Ask you to provide your entries as soon as possible.

  Thank you

  You must add a forward limit of attachment, like this:

  UTL_SMTP.write_data (l_mail_conn, '-' | l_boundary |) UTL_TCP. CRLF);

  UTL_SMTP.write_data (l_mail_conn, ' Content-Disposition: attachment ;'||) UTL_TCP. CRLF |' filename = ' test po.pdf"' | UTL_TCP. CRLF);

  UTL_SMTP.write_data (l_mail_conn, "Content-Transfer-Encoding: base64' |") UTL_TCP. CRLF);

  UPD: removed extra '-'