Problem with setting ringtones Favorites/contact

Similar Questions

• Problem with setting window of acquisition on 1429 PCIe capture card

  Hi all

  Recently, I am using the Basler A504k camera with card PCIe-1429 of goodwill for the acquisition of images at high speed. I found problems with setting the acquisition window in the capture card using Measurement & Automation Explorer.

  1. for example, if the size of the original image is 1280 * 500, if I put the window of acquisition with left 0 and width 1280, everything is OK, but if I set the width to 1279, there will be an error (error 0xBFF6002C FIFO overflow caused the acquisition of stop), if I set the width multiple of 8, there was no error. Could someone tell me why in this case, is it because the packet data transfer for acquisition card rule?

  2. the window of acquisition is set according to the camera image, right? If the camera has also a function of area of interest, the acquisition window setting is always the image coming from the camera.

  Attachment is my setting a MAX software.

  Thank you very much

  Hi xiaochunfly,

  My bet is 1280 pixels image size is aligned on 32 bytes, and the material may actually go from line to line without breaking the transfers. With the width of the non-aligned countries, he needs to start a new transfer on each line, and this has an additional load on the PCIe bus and the system memory bus. Currently infrastructure IMAQ trying to adjust to any size of border/size possible image regardless of efficiency, it take the material and changes in recent processor Intel chipsets have reduced effectiveness with system memory bus performs under these conditions. So, you can get much better performance if you use line widths. You can also get the latest IMAQ driver because there was changes in the latest few transfer more effective under some of these conditions.

  AOI is usually under the framegrabber. If you reduce the AOI who sends the camera, it seems often identical to the framegrabber as if you just had a camera with a smaller sensor. Thus, your AOI in IMAQ must be set to the size of that the camera is sending, unless for some reason you want to capture less of what the camera is able to set up on its own.

  Eric

• I have problems with setting up my Gmail in my room light 6 mL, where do you think I could get help for this?

  I have problems with setting up my Gmail in my room light 6 mL, where do you think I could get help for this?

  Hi kikikilala,

  Please explain the problem you are oriented connect Gmail with Lightroom

  Try reauthorizing your Gmail account once in Lightroom and see if that helps.

  Refer to Validation of Gmail failure

  Kind regards

  Assani

• Problem with subscription and cannot contact the support

  good night someone maybe I could help... I can do to be able to contact this company nesecito solve a problkema that I have with this subscription thank you very much and I hope that your answers... Thank you

  While the forums are open 24/7 you can't contact Adobe support at any time

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Problem with the Muse Simple Contact widget - subject changing e-mail address

  Hello

  I built a website for a client, using Adobe Muse, which is hosted by Business Catalyst. On the page of the site contact us I placed an Adobe Muse 'Single Contact' widget/shape with 3 three fields: name, Email and Message. The form worked as expected until the end of December 2014. Since then, the information in the 'Email' field are changed.

  
  

  The site has four different e-mail accounts through Business Catalyst. For the sake of discussion to call them:

  
  

  [email protected]

  [email protected]

  [email protected]

  [email protected]

  
  

  The Messages from the Simple of Muse's Contact form are sent to [email protected] .  When emails are displayed in Business Catalyst "Webmail" e-mail address that was entered in the field "E-mail" from Simple Contact Forms does not appear in the field "from". Instead, the "from" field shows that the e-mail was sent from may[email protected] regardless of what was concluded, by the sender in the Email of the Contact single form field. It don't make any difference this provider of e-mail address is entered in the field - AOL, Yahoo, Hotmail, Gmail, Roadrunner, etc - they are all changed to [email protected]

  
  

  Similarly, when the client tries to respond to the request of the customer the field 'To' is filled with Mail-4@website not the sender e-mail address is entered in the field "Email" in the form of Simple Contact of Muse.

  
  

  If I changed the form of Simple Contact of Muse so that mail is performed either [email protected] Gold [email protected] the problem exists on these accounts as well.

  
  

  I don't know where the problem lies, so I do research here and in the forum Business Catalyst. Does anyone have an idea what could be the cause and how to fix it?

  
  

  Is making it too difficult for the customer to meet the needs of their customers. I am really against a wall on that and have an angry customer who is willing to walkaway of Muse and Business Catalyst.
  

  Hi William,.

  The e-mail field you see in BusinessCatalyst is not filled by the customer in the e-mail of the form field.

  As far as I understand it, it is the e-mail ID used to publish the site through Muse. So change 'to' email field in Muse won't change 'from' email in British Colombia.

  Kind regards

  Neha

• Conditional text in Table - problems with setting the line height

  Hey there,

  I'm German, but I try to express my problem in English as I can. Not always easy with different menu names. Hope you get what I mean! :-)

  As you can see in my attached screenshot, I placed the text in a table.

  Text height is set: minimum 1.5... so it adapts to the amount of text.

  That's what I want - it should adjust the height of the conditional text marked/s.

  It always adjusts the height when I blind on the first line lines oder between (for example line 2 + 3 4).

  But if I want to blind on the last lines, there is a number at the end and an extra empty line with #.

  I know the # means hidden following text, but why it works with the red/green text.

  There are also some hidden text (green), but the brand # is just after the last word - not in a new line.

  Does anyone have a solution for this?

  Thanks in advance!

  

  So far, it's ok. A sign of the end of a text paragraph forces a new line.

  To change, do the following:

  For each condition, you need another condition for the paragraph sign that comes immediately after the condition. Not after each paragraph of a condition, but at the end of each consecutive numbers of the paragraphs of the same condition.

  So in your third example you will need more of two conditions:

  1. one for the paragraph at the end of the condition «meaasurements» sign

  2. one for the sign of paragraph at the end of the condition 'price 2 '.

  Whenever you perform other invisible conditions, you must also disable the new conditions that sign a single control paragraph.

  See the following screenshots:

  

  

  

  

  Uwe

• SONY NEX 5 - problem with setting of the shutter speed shutter priority mode

  Hello

  I strictly followed the instructions in the manual, but when I'm in the mode S (shutter priority mode), by the rotation of the wheel there is no change in the shutter speed and I don't know why.

  On the screen, above the wheel icon is written Tv.

  Please, advice me how to solve the problem. In that I'm wrong.

  The same situation that I have and with the Apperture mode.

  Thank you!

  HI ILesishki,

  I apologize for the inconvenience that was done to you. Let me see if I can help. I suggest the initialization of the device to its default settings to solve the problem. Just click on the Menu button, then choose Setup. Go to main settings and look for reset default. After the reset, turn the camera and see if the problem is still there.

  If so, I suggest to send the camera in for service. I recommend that you visit our Sony Global Web site for more information on contacting the Sony's Support centre in your area to http://www.sony.net/SonyInfo/Support/.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• problem with the creation of contacts

  When you create a contact, I encountered a bug

  Video sharing is not possible to leave the photo only

  

  This bug occurs if you enter a phone number keyboard and select 'create contact', enter the name or not enter (not essential) and lock the phone after unlock you will see a bug

  Hello

  If you believe that you have identified a software bug, you can let Apple know here:

  https://www.Apple.com/feedback/iPhone.html

  (This is a supportive community focused on user - you do talk with Apple here).

• Problem with adding previously blocked contact.

  I tried to add an old friend of my friends on Skype after believing have been they are blocked for a while. I emptied my blocked list and sought their username after asking them what it was, but the Skype directory could not find them. After about an hour of googling and try to add them in different ways, I made a new Skype account and looked for their names, and he came instantly. Does anyone have any idea what this problem is? I am not sure if they have blocked me without knowing it, but they have added me as a contact, and I've never had a notification that someone has tried to add me.

  I am sure I am running the latest version of Skype. My OS is Windows 7 64 bit Home Premium edition.

  I don't get the error messages.

  First of all, make sure that you actually have the last currently 7.1 version installed Skype.

  http://www.Skype.com/en/download-Skype/

  There was a bug in version 7.0 , making it impossible to add a previously deleted contact.

• Problem with Windows Live Hotmail contacts with sending e-mail to myself.

  I deleted all my contacts on my Hotmail account, but when I click on the button to when sending an email that I get my own name and e e-mail address and find that I get e-mails allegedly from myself that contain attachments that I have not recognize or open. How do I rectify this?

  original title: problem of Hotmail contacts

  After all the Hotmail issues in the appropriate forum found here:
  http://windowslivehelp.com/

• Problem with setting "Horizontal scrolling with tilt wheel"

  All of a sudden, everytime I open a spreadsheet it acts as if I am pressing the arrow button to the right and the active cell moves to the right as quickly as possible.

  At the same time:
  1. my wireless Microsoft mouse leave with the scroll wheel.
  2. when I click a down arrow, the menu is displayed for a split second, then disappears.
  Any ideas what may have caused this?
  * original title - Excel-unstoppable to the right at the opening of automatic pagination

  1 only with Excel

  2 Microsoft 6000v2.0
  3. since Monday morning, when I opened a spreadsheet
  4. the system changes. I didn't touch anything.
  5. the keyboard is clear. It only happens in Excel.
  I managed to do stop by disabling "horizontal scrolling with tilt wheel" in the mouse properties. Absolutely, I know for a fact that nobody changed this setting, but it became somehow activated.

• Windows Mail problem with setting up a new email address

  I have a Gateway with Windows Vista Home Premium laptop. I have an email account already set up in Windows Mail that works very well. I try to add another e-mail account. In windows Mail I click Tools, accounts and then select Add. then the email account selected. I went and set up the pop server and smtp server correctly, but for some reason I can't access this email account. I have double and even triple to verify the password. I must be overlooking something, but I just can't understand what it is. Can someone help me please. I can't really find any reason why it does not work. I'm not a newbie and know my way around the computer well enough. But I am confused.

  Charter.NET parameters are real simple...

  Incoming server POP: pop.charter.net

  Outgoing SMTP server: smtp.chater.net

  Here is the link:

  http://www.Charter.com/customers/support.aspx?supportarticleid=1781

  t-4-2

• Problem with setting icon of FDTS IDE

  Hello

  I was using Adobe Flash Builder IDE to create applications for Tablet Blackberry using Adobe AIR. Currently, I had spent in FDTS IDE based on the details that are on the bb site (). I tried to create apps for the two BB tablet as well regarding BB 10. I followed the same path that we follow in Adobe Flash Builder. But when running the unit or the Simulator, he demonstrated error 'unknown resource '. But the same folder structure, classes, images work properly in Flash Builder.

  Please someone help me solve this problem.

  Thanks in advance

  Vineeth K

  Hello

  I had found the solution for this.

  It was since then, seven windows laptop is to have two Admin & Normal user accounts. The Normal user, I used the IDE FDTS, for security reasons. And FDTS IDE, AIR SDK, Flex SDK, and BB 10 SDK were inside C:\Program Files (x 86) \Research In Motion\. It was the question. I had found that for many software blackberry and related drivers are required to be installed directly on the C drive for better use. I had tried that and found that the setting icon errors are resolved.

  Note: Do not related Blackberry software install in Program Files / Program Files (x 86) in Windows. It can be in any folder inside C (the drive in which Windows is installed), example, C:\Blackberry.

  And now FDTS turns out to be almost fine.

  Thank you & best regards

  Vineeth K.

• Problems with the registration of Contacts to the allowed senders list.

  Lately, I've seen on this forum where people are struggling to save the contacts to their list of senders allowed to ePrint Center. The problem has been described as one edits the list or it creates for the first time, adds their contact email address, and then it disappears and none of the contacts have been saved.

  Here is the workaround I would use adding and registering on the list of senders allowed in ePrint Center. I had people report success using this method. I hope it helps.

  1. connect to ePrint Center

  2. click on the senders list and add the user as usual.

  3. click on the Save icon after adding the address - do not sign of ePrint Center.

  4. then send an email to the printer from this sender you just added.

  5. once the e-mail has been received by the printer disconnect and then come back in ePrint center and check the list of senders.

  I hope this helps the community!

• Problems with setting up JDeveloper and MAF with android SDK

  I finished installing Jdeveloper studio edition and downloaded the Android SDK. When I try to install the Android SDK with Jdeveloper, I get the following error...

  java.lang.RuntimeException: XPathFactory #newInstance () cannot create an XPathFactory for the default object model: http://Java.Sun.com/JAXP/XPath/DOM with the XPathFactoryConfigurationException: javax.xml.xpath.XPathFactoryConfigurationException: java.util.ServiceConfigurationError: javax.xml.xpath.XPathFactory: weblogic.xml.jaxp.RegistryXPathFactory provider not found

  
  

  

  
  

  Please help me in fixing this problem.

  
  

  Thank you

  Aerts.
  

  Arun, I tried. Does not resolve the issue. I moved all records related to the generic installation jdeveloper and JDK 8 to the trash and then started editing studio of jdeveloper, then he asked for the location of the JDK. When entered the path to the JDK 7, everything has worked well.

  Thanks for all the help.

  AB.