Problem with several polar plots

Similar Questions

• problem with several graph XY axes

  Hallo,

  I'm tracing different variables in the same plot with several axes. I have the following problem (see attachment)

  the y axis secondary on the right side of the plot has a large area of him and one of the other secondary axis falls right above others. I tried it in the two labview 8.2 and 8.5 with the same results.

  any ideas?

  Thank you in advance,

  Thodoros

  Try the following movements:

  Right-click-> popup menu-> advanced-> reset scale layout

• problems with several hr2000 + external trigger mode

  I hope someone can me halp on this problem:

  I need to acquire spectra with two hr2000 + and a nirques256 with labview external trigger mode.

  The external trigger mode is done by another pc and also the train of pulpse generator.

  If a trigger after I'm going to generate a 100 impulse every 20ms for each device through a dedicted Council.

  If I only work with ghosts at times things works fine and the system is very stable, BUT if I work with two or three spectres by now I have a really strange (maybe for me) problem with the timeout.

  This is due to an incorrect number of pulses:

  If I work with two device then I need to produce pulses of 200 each 20ms but my spectrometers provide data every 40ms, but I need to equip every 20ms

  If I work with threedevice and then I need to produce pulses of 300 each 20ms but my spectrometers to obtain data each 60ms but I need to equip every 20ms

  Thus, in this way, I lose the synchronization of the three councils.

  An options may be to use a dedicated pc for each device

  I acquire the signal via usb and the problem is maybe duo to the bus

  I think maybe the problem is duo to the vi block! Maybe I can use single istance at times when I call the procedure

  Thank you

  I just solved the problem: it was a problem with reentrancy

  Default LabVIEW use not reentrant execution

• GREP to find the end of the name of the author of history (problems with several lines)

  

  I don't get these documents and I can understand how to use GREP to search for each source name/quote author. I have problems with the above example. I think it's because of paragraph returns, possibly something to do with the comma. I've fiddled around for an hour, tent multi and expressions of the one line and still can not understand.

  It's what works for the most part:

  (? < = \r)\s*[–][-\u\l]+(?=\Z)

  

  If you can count on having the line beginning with an en dash (possibly after an unused space), this should do it:

  ^\s*~=.+\Z

  The ^ indicates start of a line, while (?)<=\r) relies="" on="" a="" hard="" return:="" ^="" will="" also="" match="" start="" of="" story,="" and="" all="" sorts="" of="" hard="" page/column="">

  Do not "anticipate" \Z; Since it is also an indicator of the place, like ^ and $, there can never be "selected" in the traditional sense of the term. (Which is the reason why allowing you a \r postanalyse, because * will * be selected if not).

  Your example of Homer Simpson was rejected because of the hard return and the comma - or were in your list of approved characters.

  I think opt for the period more ('get all') should work, but it is not - by default - search returns. This is where the modifier of Single-Line can help you. A brief description of the single-line Mode is that it allows the period correspond to a return as well. the history is considered one long line, with possibly a few \r codes that are not treated as special programs.

  It will work for GREP search only:

  ( ? s)^\s*~=.+\Z

  but not for the GREP styles. A GREP style still works only for a single paragraph; You can have a \r code anywhere in the expression. Oddly enough, TI work if you draw a soft line break in this last line - the strange thing is, the style GREP also needs (? s), so, apparently, at this level the soft line break is also considered a line break.
  Furthermore, your example of Homer Simpson has an additional line below, and causing trouble because there is no \Z just after what you want to find. Allowing returns will add that last line in your search, which may not be what you want either. Replace the hard return by a soft will also solve part.

• Problems with several .exe slow down my computer - see in the Task Manager.

  Hi everyone - I had posted in other sections of the forum such as: http://answers.microsoft.com/en-us/windows/forum/windows_7-files/why-does-dllhostexe-com-surrogate-consumes-memory/bd7e42bb-802d-4eb9-95b2-2bb6b566996d?page=1&tm=1416087694827

  but still have no answer to my problem - I just wanted to reference I've tried many "patches" suggested, without success.

  On the question... in addition to causing me problems of dllhost.exe, I now see a list of other authors in my task which are guilty of collaboration Manager.  The interesting thing is that I put the finger on a particular instance of dllhost.exe (COM Surrogate) who is about 8 k in size - whenever I'm deleting this one (which can sometimes be difficult to find when there are multiple instances of similar size) all other instances of dllhost.exe problem simultaneously remove themselves as well.  This is only a temporary solution as the problem will resume as soon as 10 minutes later, gobble up all my CPU and memory.

  Anyway - as I said, I noticed several other spots displayed - the interesting thing is that these tasks ALSO disappear when I delete the task of dllhost.exe k 8 initiators.

  Here is the list of the other guys who gobble up my system resources:

  dllhst3g.exe

  dpnsvr.exe

  dplaysvr.exe

  dvdupgrd.exe

  Rundll32.exe

  wiaacmgr.exe

  cmmon32.exe

  Has anyone else noticed these programs causing problems?  I would like to know how to solve this problem, but since the last message in the previous topic, it still has not been resolved by Microsoft...

  I know this post is a few months old, but I stumbled across it all fighting the same problem on a laptop of family members.  McAfee or Malwarebytes was able to track it down in my experience either.

  The task Mgr showed the same process taking a ton of memory and CPU.

  To resolve this issue, it turns that Symantec posted a tool that you can leverage.  Here is the link: http://www.symantec.com/security_response/writeup.jsp?docid=2014-111020-0511-99

  I would leverage the link Symantec before using the links of Evan (above), these links are to sites with strong ads and an EXE from a developer private.

  I hope this helps.

  -Higgins

• Problem with several adapters and Jar file included in a service.

  Hi all

  I'm new here and I am ready to work with the VMWare client sdk. I have already started and exported several adapters to implement the full functionality that I need. However, I get an error:

  Request context failed to create 'com.management.serviceprovider' in ' 1.0.0 version. org.springframework.beans.factory.BeanCreationException: error creating bean with name 'DatacenterConfig': calling the init method failed; nested exception is org.springframework.beans.factory.CannotLoadBeanClassException: cannot find class [com.adapters.Datacenter.ClusterConfigAdapterImpl] for the beans with the name 'ClusterConfigAdapterImpl' defined in URL [bundleentry://281.fwk1147580192/META-INF/spring/bundle-context.xml]. nested exception is java.lang.ClassNotFoundException: com.adapters.Datacenter.ClusterConfigAdapterImpl finds do not bundle [com.management.serviceprovider]

  at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1455)

  at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:519)

  at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:456)

  to org.springframework.beans.factory.support.AbstractBeanFactory$ 1.getObject(AbstractBeanFactory.java:294)

  at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:225)

  at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:291)

  at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:193)

  at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:591)

  at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:918)

  to org.eclipse.gemini.blueprint.context.support.AbstractDelegatedExecutionApplicationContext.access$ 1600 (AbstractDelegatedExecutionApplicationContext.java:60)

  to org.eclipse.gemini.blueprint.context.support.AbstractDelegatedExecutionApplicationContext$ 4.run(AbstractDelegatedExecutionApplicationContext.java:325)

  ...

  This error occurs very often and it's strange because I place the cards together in a same way. Here is the OSGI layer and contaxt bundle files:

  Context Bundle:

  < name of the bean = "ClusterAdvancedAdapterImpl" class = "com.adapters.Datacenter.ClusterAdvancedAdapterImpl" >

  < constructor-arg ref = "dataServiceExtensionRegistry" / >

  < / bean >

  < osgi:service id = "DatacenterConfig" ref = "ClusterConfigAdapterImpl".

  interface = "com. VMware.vise.Data.Query.PropertyProviderAdapter"/ >

  < osgi:reference id = "dataServiceExtensionRegistry".

  interface = "com. VMware.vise.Data.Query.DataServiceExtensionRegistry"/ >

  And I really don't know why this isn't a job.

  The second problem is that I have another project with classes and I want to export it to a jar file. When I do this I also want to include this pot in the bundle, but when I change the ant file it does not work on virgo.

  Any help will be appreciated.

  Kind regards

  Stefan

  For option 2 which he question in post above, you can use the piece of code below in the Ant script in the target of the compilation at the end.

  --------

  -----

• Problem with the polar H7 and Apple Watch mating

  I'm trying to pair a polar H7 to my Apple Watch.  Bluetooth under settings, the watch detects polar device, but is not pair.  (The wheel continues to spin and it reads not 'connected').  I've disabled the watch and tried again but still the same result.  Can anyone help?

  Hello

  • Wear the polar H7 (which lights up by being broken to the strap and rotates when detached).
  • On Apple Watch, go to settings > Bluetooth.
  • Wait that Polar H7 appears, then press it.

  If the monitor has already been associated with another device (for example, your iPhone), try it unpairing from that first.

• problem with several NI-CAN card

  Hi all, I have an application where I need 4 different CAN bus. To achieve that I already have 2 cards NI CAN Series 2 with 2 ports each. On my applicantion I configured each single port individually and communicate with every bus, but for some reason any (I don't know why) one or two of the lost of ports, communication is not always the same port, it is random. I don't know if the NI-CAN driver has any limitation or what I am doing wrong. I don't see the light at the end of the tunnel. Any help will be welcome.

  Thank you

  Alfredo

  Hi Larry,

  Those are PCI cards and the driver CAN is the 2.7.2. I think I found the problem. I'm used to using only one CAN wear and the Subvi configuration, I did before (long ago) as entered the Port name and baud rate and as output of the PortHandler, but it also includes a RESET (disscontinued on new versions) command inside.

  The problem was because I have configure each port with the Subvi Secuence structure and I think one of the ports to lose the config due to reset and to assign the same PortHandler to both ports on a map.

  I use a new slot - VI, I had recently where I set up one of the ports and everything CAN map I (NOR or vector), this new VI is not the old VI RESET and it works great!

  Thanks anyway for you interest and prompt response.

  Alfredo

• SMU 6341 and SCB-68: problem with several entries... * URGENT *.

  Hello

  I have an urgent problem, I would really appreciate help with.

  I have a terminal block (SCB-68) connected to a multifunction data acquisition (6341). There are 4 entries in the Terminal:

  1 sensor laser displacement, coming from a controller as a signal of analog voltage output ("1V" and "0V" on the controller). Connected to AI 0 and GND.

  2. The accelerometer (PKI, coming from a then the voltage signal conditioner) connected to GND AI and AI 10.

  3 load cells (PKI, coming from a then the voltage signal conditioner) connected to AI 11, 12, 13 and 14, each connected to the GND PIN is close.

  Problem:

  By MAX, if I read in 6 channels above my data acquisition (6341), my displacement sensor (#1) and the accelerometer (#2) behave very well. However, among the channels (AI 11 and AI 12) load cell switch in tension, as if they follow the movement sensor voltage (#1). For example, there is usually a mV - 800 in AI 11 voltage change.

  This problem disappears when I'm not reading travel (HAVE 0, #1) laser. that is as soon as I remove this channel of my task, the readings of cell and accelerometer support back to normal (base voltage ~ 0V). Yet once if I ask again the laser channel, I see a vertical movement in the readings of load cell 2 (displacement varies with the current tension HAVE 0).

  Attempts of fixation:

  -tried to change the differential using AI laser sensor 0 and AI 9

  -tried to delete the field of laser 120V Power

  Any ideas at all would be greatly appreciated!

  SCB-68:

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/1180

  SMU-6341:

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/207415

  This is the general idea.  If you must use high impedance sources and that you have enough channels available, placing a channel of the grounding of entry between each other usually helps.  You must analyze these chains grounded.  Just grounded isn't them enough.

  Example: Sensor has = AI0, ground = AI1, sensor B = AI2, ground = AI3, sensor C = AI4, AI5 = ground.  Read AI0:5.

  Lynn

• Problems with several PVSCSI cards per vm?

  Hi all - I have a Windows 2008 R2 SQL Server and 3 volumes... 30, 50 GB and 300 GB. I have a separated from PVSCSI adapter bound to each volume. Is this acceptable or favorite? I'm using iSCSI if that's important.

  The reason why I ask, I see latency on long-running queries to my web server to my volume (300 GB) database.

  Is it possible that 3 controllers PVSCSI is exaggerated? I am gaining anyhting with 3?

  Thoughts and comments or suggestions would be greatly appreciated.

  What weight are SQL workloads?  PVSCSI driver is actually worse than the regular driver LSI under low I/O workloads.  Read the blog post following by Scott Drummonds (VMware performance guru), as well as this VMware KB on the same subject:

  http://vpivot.com/2010/02/04/pvscsi-and-low-IO-workloads/

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1017652

  In addition, I don't see really any advantage to have several cards PVSCSI by VM, unless you exceed the virtual SCSI devices per SCSI card number. If anything it complicates things a bit and won't give you the performance gains.

• Problem with several title Animations

  Hi, I'm fairly new to first items 11 and I'm working on a video project where I want to add a title that fades and then faints. I started by adding a "default text" title to a video track my main video above, typing in my title (what a single line of text), and then apply animations. This is where my first problem occurred; the program would only allow me to apply an animation to the title (for example, I might add "bland online in" but if I tried to add "fade out online" so he would turn just animations) vaulted around that, I tried to divide my title in half and adding the fade in animation of the first half and the fade out animation of the second half. For some reason, first has linked these titles together so if I add animation to one, it applies to these two titles. I tried to put each half of the title on different tracks, but it did not work; they always act like they are a title when it comes to apply animations. He seems to have a fade in / fade out title is something fairly common and easy to do, so I hope you experts out here can help, thank you very much!

  -ETRK

  P.S. As for the system, I am under first elements 11 on a Windows 7 desktop computer powerful enough

  ETRK,

  Instead of 'splitting' your title, use the command duplicate titration module, to create a copy of this title and name is differently, say 'Title_Name' 02. Place the two titles on the same video track, adjust the duration, according to your needs with two titles and apply an animation effect to one, then another Animation effect to another.

  Another workflow would be to ignore the preset animations and those by effect Keyframes, build say opacity. Which is not quite as simple as the preset animations, but allows much more control.

  Good luck

  Hunt

• I'm a noob and have problems with several buttons on the pages of menu bar

  Hi all

  I'm building a site of basic database for my local community, and everything is fine until I try to add more script for the command buttons on the pages in the menu. The menu has 7 buttons that work, then on each of these pages are more than 6 buttons. The first page works fine but when I add the code to the following page to control its buttons access of undefined prop. error and continues to play through any chronology. It's the im code using control buttons on the pages in the menu. If someone could help that would be great.

  Nothing particularly wrong with the code you show it, it is more likely a matter of trying to affect a bad code.  If you can view the actual error message you get can narrow the problem... before that if you go in your publish the Flash settings section and select the option to enable debugging, the error message will have a bit more info in there.

  If you can describe this scenario where you have other buttons on other pages as well as how these pages differ from each other, which can be useful as well.  What are all the labels image linked to... the main timeline?  Is - this code on the main timeline or in the pages?

• problems with several links

  I don't know that this is the basis, but out of my reach. I try to have several links off site, but have hit a brick wall.

  If I have the code below, it opens the second link as soon as you open the page of links, if I have the "function onLinkClick (evt)", above btn6_btn I end up with the error message twice. Is it possible to have multiple buttons on a page link. I played with it for hours.

  Thank you

  Steve

  btn5_btn.addEventListener (MouseEvent.CLICK, onLinkClick);

  function onLinkClick (evt) {}
  siteURL var = new URLRequest ("http://forums.adobe.com/community/flash");
  navigateToURL (siteURL, "_blank");
  }
  btn6_btn.addEventListener (MouseEvent.CLICK, onLinkClick);
  siteURL var = new URLRequest ("http://graphics.palomar.edu/graphics/");
  navigateToURL (siteURL, "_blank");

  There are a few ways to do this, but perhaps the simplest is to have a function of earphone separated for each of the buttons of your:

  btn5_btn.addEventListener(MouseEvent.CLICK, onLinkClick);
  
  function onLinkClick (evt:Event) :void{
      var siteURL = new URLRequest("http://forums.adobe.com/community/flash");
      navigateToURL(siteURL, "_blank");
  }
  
  btn6_btn.addEventListener(MouseEvent.CLICK, onLinkClick2);
  function onLinkClick2 (evt:Event) :void{
      var siteURL = new URLRequest("http://graphics.palomar.edu/graphics/");
      navigateToURL(siteURL, "_blank");
  }
  

  EDIT: OMG 3 responses within one minute of each other!

• Problem with several tabs of previous logon on commissioning (FF14)

  I have Firefox 14 and obtained "show my windows and tabs from last time" activated. But when FF starts, I see only "subject: Home" page.

  I'm sorry, that the problem is in another open copy of firefox.exe (it a few days ago I had to hang up thx to the Adobe's Flash). Now it's OK.

• Problem with several sub-groups through case structure Enum: 'the VI isn't in a State compatible with this operation.

  Hello

  I'm using LabVIEW 8.0 and I'm trying to create a subgroup of experts which shows the façade of a subvi according to the choice made by the user via the menu drop down Enum.  I wired the Enum to a case structure and apply a coding identical to each structure of individual cases with the exception of course change the source of sub - vi.  However, you receive an error "The VI isn't in a State compatible with this operation."  I have managed to make a single sub - vi work within a subgroup of experts using a true/false case structure and the same exact coding.  However, now that I use an Enum box connected to a structure of the case, I get this error.  I enclose my diagram as well.  Could someone help me as to where it is that I am wrong?

  Thanks in advance!

  If your VI runs already, when you try to run it? Which returns the error you get.

  Check the State of VI before trying to run or make an error handling.