problem with several NI-CAN card

Similar Questions

• There is a problem with the information of card entered here. Please enter another card or contact your bank. Can Hoqw I solve this guy?

  There is a problem with the information of card entered here. Please enter another card or contact your bank. Can Hoqw I solve this guy?

  Hello

  Please contact support: -.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Hope this helps!

• Error message: a problem with your wireless network card

  Hello, I get this message as shown below: any ideas how to solve this problem? A problem with your wireless network card

  Your wireless card has stopped working properly.

  There is a network adapter that allows your computer to connect to a wireless network.

  To find out if a version update of your wireless network card is available, contact the manufacturer of your device or computer.

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• Problems with NAT? Can't access internet from inside the network?

  I was intrigued with this problem for a few days now. I'm stuck on what could be the issue. The problem is that I can ping my router, G0/0 and G0/1, to the internet. However, since the switch and my PC, I can not ping Internet. I'm sure that everything is configured correctly, but here is my setup for the switch and the router:

  Router 1:

  version 15.1 no service button horodateurs service debug datetime msec Log service timestamps datetime msec encryption password service ! hostname LAN_Router_1 ! boot-start-marker boot-end-marker ! ! enable secret 5 *. ! No aaa new-model ! no location network-clock-participate 3 ! dot11 syslog no ip source route ! IP cef ! ! ! ! domain IP MyTestLab.com 8.8.8.8 IP name-server IP-server names 8.8.4.4 No ipv6 cef ! Authenticated MultiLink bundle-name Panel ! ! ! ! ! voice-card 0 ! ! ! ! ! ! ! Crypto pki token removal timeout default 0 ! ! ! ! license udi pid CISCO3845-MB sn FOC105013BA username * secret privilege 15 5 *. ! redundancy ! ! property intellectual ssh time 60 property intellectual ssh authentication-2 retries property intellectual ssh event logging property intellectual ssh version 2 ! ! ! ! ! ! ! ! interface Loopback0 192.168.254.1 IP 255.255.255.255 ! interface GigabitEthernet0/0 DHCP IP address penetration of the IP stream stream IP output NAT outside IP IP virtual-reassembly in automatic duplex automatic speed media type rj45 ! interface GigabitEthernet0/1 the IP 192.168.0.1 255.255.255.248 penetration of the IP stream stream IP output IP nat inside IP virtual-reassembly in GLBP 100 ip 192.168.0.4 priority GLBP 100 115 GLBP 100 preempt automatic duplex automatic speed media type rj45 ! ospf Router 5 router ID - 192.168.254.1 network 192.168.0.1 0.0.0.0 area 1 192.168.254.1 network 0.0.0.0 area 0 ! IP forward-Protocol ND no ip address of the http server no ip http secure server ! ! IP nat inside source list 10 interface GigabitEthernet0/0 overload IP route 0.0.0.0 0.0.0.0 dhcp ! access-list 10 permit 192.168.94.32 0.0.0.15 connect access-list 10 permit 192.168.17.0 connect 0.0.0.7 access-list 10 permit 192.168.52.0 connect 0.0.0.7

  
  access-list 10 permit 192.168.0.0 0.0.0.7 connect
  access-list 10 deny any newspaper
  !
  !
  !
  !
  !
  !
  control plan
  !
  !
  !
  !

  profile MGCP default
  !
  !
  !
  !
  !
  connection of the banner ^ C
  W A R N I N G

  THIS IS A PRIVATE COMPUTER SYSTEM.

  This computer system, including all related equipment, network devices
  (specifically including Internet access), are provided only for
  authorized used.

  All computer systems may be monitored for all lawful, including purpose
  to ensure that their use is authorized, for management of the system, to
  facilitate protection against unauthorized access, and to verify security
  survival and operational security procedures.

  Monitoring includes active attacks by authorized personnel and their
  entities to test or verify the security of the system. During the surveillance,.
  information may be examined, recorded, copied and used for authorized
  purposes.

  All information, including personal information, placed on or sent over
  This system may be monitored. Uses of this system, authorized or
  unauthorized, constitutes consent to monitoring of this system.

  Unauthorized use may subject you to criminal prosecution. Evidence of
  any unauthorized use collected during monitoring may be used for
  administrative, criminal or other adverse action. Use of this system
  constitutes a consent to monitoring for these purposes.
  ^ C
  !
  Line con 0
  Synchronous recording
  local connection
  line to 0
  line vty 0
  local connection
  entry ssh transport
  output transport ssh
  line vty 1 4
  opening of session
  transport of entry all
  !
  Scheduler allocate 20000 1000
  NTP 198.60.73.8 Server
  NTP 13.85.70.43 Server
  SaveRunConfig event manager applet
  cron cron-event timer entry ' 0 0 * * ".
  command action 1.0 cli 'enable '.
  cli 2.0 action command "RAM".

  Router 2:

  version 15.1 horodateurs service debug datetime msec Log service timestamps datetime msec encryption password service ! hostname LAN_Router_2 ! boot-start-marker boot-end-marker ! ! ! card order type necessary for slot 1 Monitor logging warnings enable secret 5 *. ! No aaa new-model ! clock timezone CST - 5 0 ! dot11 syslog IP source-route ! IP cef ! ! ! ! domain IP MyTestLab.com 8.8.8.8 IP name-server IP-server names 8.8.4.4 No ipv6 cef ! Authenticated MultiLink bundle-name Panel ! ! ! ! type of parameter-card inspect global Select a dropped packet newspapers ! voice-card 0 ! ! ! ! !

  
  !
  !
  Crypto pki token removal timeout default 0
  !
  !
  !
  !
  license udi pid CISCO3845-MB sn FOC1411592J
  username * secret 5 *.

  !
  redundancy
  !
  !
  property intellectual ssh time 60
  property intellectual ssh authentication-2 retries
  property intellectual ssh event logging
  property intellectual ssh version 2
  !
  !
  !
  !
  !
  !
  !
  !
  interface Loopback0
  192.168.254.2 the IP 255.255.255.255
  !
  interface GigabitEthernet0/0
  DHCP IP address
  penetration of the IP stream
  stream IP output
  NAT outside IP
  IP virtual-reassembly in
  automatic duplex
  automatic speed
  media type rj45
  !
  interface GigabitEthernet0/1
  IP 192.168.0.2 255.255.255.248
  penetration of the IP stream
  stream IP output
  IP nat inside
  IP virtual-reassembly in
  GLBP 100 ip 192.168.0.4
  priority GLBP 100 110
  automatic duplex
  automatic speed
  media type rj45
  !
  ospf Router 5
  router ID - 192.168.254.2
  network 192.168.0.2 0.0.0.0 area 1
  0.0.0.0 network 192.168.254.2 area 0
  !
  Default IP gateway 192.168.0.1
  IP forward-Protocol ND
  no ip address of the http server
  no ip http secure server
  !
  !
  IP nat inside source list 10 interface GigabitEthernet0/0 overload
  IP route 0.0.0.0 0.0.0.0 dhcp
  !
  SSH extended IP access list
  permit tcp host 192.168.52.2 any eq 22 log
  permit tcp 192.168.10.0 0.0.0.255 any eq 22 log
  permit tcp host 192.168.17.18 any eq 22 log
  any eq 22 host tcp 192.168.0.1 newspaper permit
  permit tcp host 192.168.0.2 any eq 22 log
  permit tcp host 192.168.0.3 any eq 22 log
  permit tcp host 192.168.0.5 any eq 22 log
  denyip a session
  !
  access-list 10 permit 192.168.94.32 0.0.0.15 connect
  access-list 10 permit 192.168.17.0 connect 0.0.0.7
  access-list 10 permit 192.168.52.0 connect 0.0.0.7
  access-list 10 permit 192.168.0.0 0.0.0.7 connect
  access-list 10 deny any newspaper
  !
  !
  !
  !
  !
  !
  control plan
  !
  !
  !
  !
  profile MGCP default
  !
  !
  !
  !
  !
  connection of the banner ^ C
  W A R N I N G

  THIS IS A PRIVATE COMPUTER SYSTEM.

  This computer system, including all related equipment, network devices
  (specifically including Internet access), are provided only for
  authorized used.

  All computer systems may be monitored for all lawful, including purpose
  to ensure that their use is authorized, for management of the system, to
  facilitate protection against unauthorized access, and to verify security
  survival and operational security procedures.

  Monitoring includes active attacks by authorized personnel and their
  entities to test or verify the security of the system. During the surveillance,.
  information may be examined, recorded, copied and used for authorized
  purposes.

  All information, including personal information, placed on or sent over
  This system may be monitored. Uses of this system, authorized or
  unauthorized, constitutes consent to monitoring of this system.

  Unauthorized use may subject you to criminal prosecution. Evidence of
  any unauthorized use collected during monitoring may be used for
  administrative, criminal or other adverse action. Use of this system
  constitutes a consent to monitoring for these purposes.
  ^ C
  !
  Line con 0
  session-timeout 360
  exec-timeout 360 0
  7 password *.
  Synchronous recording
  local connection
  line to 0
  opening of session
  line vty 0 4
  SSH access class in
  Synchronous recording
  local connection
  entry ssh transport
  output transport ssh
  !
  Scheduler allocate 20000 1000
  NTP 198.60.73.8 Server
  NTP 13.85.70.43 Server
  SaveRunConfig event manager applet
  cron cron-event timer entry ' 0 0 * * ".
  command action 1.0 cli 'enable '.
  cli 2.0 action command "RAM".

  Switch:

  version 12.2 no service button tcp KeepAlive-component snap-in service a tcp-KeepAlive-quick service horodateurs service debug uptime Log service timestamps uptime encryption password service ! hostname LAN_Switch ! boot-start-marker boot-end-marker ! ! username * secret privilege 15 5 *. ! ! ! No aaa new-model clock timezone CST - 6 1 supply ws-c3750-24ts switch mtu 1500 routing system IP routing IP - domain name MyTestLab.com 8.8.8.8 IP name-server IP-server names 8.8.4.4 ! ! ! ! ! ! ! ! ! spanning tree mode rapid pvst spanning tree logging spanning tree extend id-system ! internal allocation policy of VLAN ascendant ! property intellectual ssh time 60 property intellectual ssh authentication-2 retries property intellectual ssh event logging property intellectual ssh version 2 ! ! interface Loopback0 192.168.254.5 the IP 255.255.255.255 ! interface FastEthernet1/0/1 switchport access vlan 17 switchport mode access spanning tree portfast spanning tree enable bpduguard ! interface FastEthernet1/0/2 switchport access vlan 10 switchport mode access spanning tree portfast spanning tree enable bpduguard ! interface FastEthernet1/0/3 switchport access vlan 666 switchport mode access Shutdown spanning tree portfast spanning tree enable bpduguard ! interface FastEthernet1/0/4 switchport access vlan 666 switchport mode access Shutdown spanning tree portfast spanning tree enable bpduguard

  
  !
  interface FastEthernet1/0/5
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/6
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/7
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/8
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/9
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/10
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/11
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/12
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/13
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/14
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/15
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/16
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/17
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/18
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/19
  Description # PC #.
  switchport access vlan 10
  switchport mode access
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/20
  Description # X_BOX #.
  switchport access vlan 666
  switchport mode access
  Shutdown
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/21
  switchport access vlan 94
  switchport mode access
  spanning tree portfast
  spanning tree enable bpduguard
  !
  interface FastEthernet1/0/22
  switchport access vlan 5
  switchport mode access
  !
  interface FastEthernet1/0/23
  switchport access vlan 5
  switchport mode access
  !
  interface FastEthernet1/0/24
  switchport access vlan 5
  switchport mode access
  !
  GigabitEthernet1/0/1 interface
  switchport access vlan 666
  Shutdown
  !
  interface GigabitEthernet1/0/2
  switchport access vlan 666
  Shutdown
  !
  interface Vlan1
  no ip address
  Shutdown
  !
  interface Vlan5
  IP 192.168.0.5 255.255.255.248
  !
  interface Vlan10
  address 192.168.10.2 255.255.255.0
  !
  interface Vlan17
  IP 192.168.17.17 255.255.255.248
  !
  interface Vlan52
  IP 192.168.52.1 255.255.255.248
  !
  interface Vlan94
  IP 192.168.94.33 255.255.255.240
  !
  ospf Router 5
  router ID - 192.168.254.5
  Log-adjacency-changes
  network 192.168.0.5 0.0.0.0 area 1
  network 192.168.10.2 0.0.0.0 area 2
  network 192.168.17.17 0.0.0.0 area 2
  network 192.168.52.1 0.0.0.0 area 2
  network 192.168.94.33 0.0.0.0 area 2
  0.0.0.0 network 192.168.254.5 area 0
  !
  IP classless
  IP route 0.0.0.0 0.0.0.0 192.168.0.4 permanent
  no ip address of the http server
  no ip http secure server
  !
  !
  SSH_IN extended IP access list
  permit tcp host 192.168.52.2 any eq 22 log
  permit tcp 192.168.10.0 0.0.0.255 any eq 22 log
  permit tcp host 192.168.17.18 any eq 22 log
  any eq 22 host tcp 192.168.0.1 newspaper permit
  permit tcp host 192.168.0.2 any eq 22 log
  permit tcp host 192.168.0.3 any eq 22 log
  permit tcp host 192.168.0.5 any eq 22 log
  deny ip any any newspaper
  !
  !
  connection of the banner ^ C
  W A R N I N G
  THIS IS A PRIVATE COMPUTER SYSTEM.
  This computer system, including all related equipment, network devices
  (specifically including Internet access), are provided only for
  authorized used.
  All computer systems may be monitored for all lawful, including purpose
  to ensure that their use is authorized, for management of the system, to
  facilitate protection against unauthorized access, and to verify security
  survival and operational security procedures.
  Monitoring includes active attacks by authorized personnel and their
  entities to test or verify the security of the system. During the surveillance,.
  information may be examined, recorded, copied and used for authorized
  purposes.
  All information, including personal information, placed on or sent over
  This system may be monitored. Uses of this system, authorized or
  unauthorized, constitutes consent to monitoring of this system.
  Unauthorized use may subject you to criminal prosecution. Evidence of
  any unauthorized use collected during monitoring may be used for
  administrative, criminal or other adverse action. Use of this system
  constitutes a consent to monitoring for these purposes.
  ^ C
  !
  Line con 0
  session-timeout 60
  exec-timeout 60 0
  Synchronous recording
  local connection
  line vty 0
  access-class SSH_IN in
  local connection
  line vty 1 4
  access-class SSH_IN in
  opening of session
  line vty 5 15
  access-class SSH_IN in
  opening of session
  !
  NTP 198.60.73.8 Server
  Event Manager environment suspend_ports_config flash: / susp_ports.dat
  Event Manager environment suspend_ports_days 7
  Event Manager user Directorystrategie "flash: / policies /.
  Event manager session cli username "stw".
  political event manager sl_suspend_ports.tcl
  political event manager tm_suspend_ports.tcl
  SaveRunConfig event manager applet
  cron cron-event timer entry ' 0 0 * * ".
  command action 1.0 cli 'enable '.
  cli 2.0 action command "RAM".

  Well, I totally forgot the keyword "log" and NAT:

  Cisco IOS NAT support ACLs with a keyword "log"?

  A. When you configure Cisco IOS NAT translation dynamic NAT, an ACL is used to identify the packages that can be translated. The current NAT architecture does not support the ACL with a keyword "log".

  http://www.Cisco.com/c/en/us/support/docs/IP/network-address-translation...

  If your problem is not the mask with joker, but the command "log"...

• I have a problem with the wireless network card.

  Hello

  I use a laptop Medion MIM 2210 and I have a problem with my wireless network adapter.

  I get a message before Windows 7 starts telling me that there is problem with a wireless driver. The exact message says:

  "Intel UNDI, PXE - Z.0 (build 082)

  Copyright (C) 1997,1998,1999 Intel Corporation

  VIA Rhine II Fast Ethernet Adapter v2.43 (2005/12/15)

  PXE - E61: Media test failure, check cable of

  "PXE - MOF: exit Inel PXE ROM.

  This message appears every time you start and I don't know what he means by "Media Test Failure".

  I turned on my laptop today and noticed I had no internet connection, it showed that it connected but with yellow '!' symbol indicating that it was not fully connected. He did this for a while now and I have reinstalled Windows, in safe mode and I tried to delete the drivers and re - install, but it hangs right on uninstall what makes me angry no the case.

  Of course now, I tried to look for help my internet connection is running but the message is still there. Can someone tell me what to do or how to solve this problem, I am standing now on what to do. I was also on the drivers Medion website but it is impossible to navigate around and drivers without end there'e to choose. I would consider ringing them and asking them if they were not located in Germany as it would cost me a bomb! I did just now searching online via the Device Manager to see if he can find an update for the drivers but nothing came.

  Thanks for any help that anyone can offer :)

  The message is to be cause the BIOS looking for boot from LAN (not wireless) before it starts and then from the hard drive. The Media test failure is because to boot from LAN it tests to see if the wired Ethernet is connected, it is not if it generates the error message.

  Enter the BIOS press F2 after initial power on but before the Logo Windows shows

  Integrated devices should allow you to set the settings of wired network adapter. According to the BIOS it is either "enabled with PXE" or have another option to enable or disable the boot ROM

  In the boot options the LAN card should be removed altogether.

  This message is ONLY applicable to the transfer of the BIOS boot process and should have no impact on the problems of WiFi (it is not on WiFi)

• Problem with the 2007 Hallmark card studio deluxe installation and get error message "Error 1904.Module that cannot save c:\windows\syswow64\msxml4dll".

  Original title: 1904.Module error cannot save C:\windows\SysWOW64\msxml4dll. HRESULT 2147023782 contact your support staff

  I want to install hallmark card studio deluxe 2007 and I got this message

  C:\windows\SysWOW64\msxml4dll Error 1904.module cannot save. HRESULT 2147023782 contact your support staff.

  Someone knows how to fix this?

  Thank you

  Hi Roman,.

  Thanks for posting in Microsoft Community!

  It seems that you have a problem with the installation of Hallmark card studio deluxe 2007 and will receive error message "Error 1904.Module than c:\windows\syswow64\msxml4dll cannot be saved."
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  I may need a few more details to better understand the issue.
  1. deal with any issue when installing any other program?

  2. did you of recent changes on the computer before this problem?

  Method 1:
  I suggest you to run the fixit and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/program_install_and_uninstall

  Method 2:
  If the problem persists, I suggest to perform the clean boot and see if you can install the software.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135
  Note: After the boot minimum troubleshooting step, follow step 3 in the link provided to return the computer to a Normal startup mode.
  Method 3:
  If the problem persists, I suggest you try to remove all the temporary files in the temp folder. And check if it helps.
  Follow the steps to clear the temp folder:

  a. click the Start button and in the search in %temp% bar and press ENTER.

  b. the Temp folder opens, press on Ctrl + A , and then press delete.

  Note: I suggest that you backup important file or a folder in the Temp folder.

  You can check the links for more information:

  Install a program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  Install programs: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/installing-programs-frequently-asked-questions

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Problem with update of credit card

  Hello

  I have a problem with my account of creative mgoe to adobe: my credit card has expired and I need to update it.

  But when I update the system ask me to change my address because it is not verifable. I have change as the system suggests, but I get another message to wrong address (and if I try to use the old address I get the same message...).

  How can I solve this problem?

  Hello

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• problem with several graph XY axes

  Hallo,

  I'm tracing different variables in the same plot with several axes. I have the following problem (see attachment)

  the y axis secondary on the right side of the plot has a large area of him and one of the other secondary axis falls right above others. I tried it in the two labview 8.2 and 8.5 with the same results.

  any ideas?

  Thank you in advance,

  Thodoros

  Try the following movements:

  Right-click-> popup menu-> advanced-> reset scale layout

• problems with several hr2000 + external trigger mode

  I hope someone can me halp on this problem:

  I need to acquire spectra with two hr2000 + and a nirques256 with labview external trigger mode.

  The external trigger mode is done by another pc and also the train of pulpse generator.

  If a trigger after I'm going to generate a 100 impulse every 20ms for each device through a dedicted Council.

  If I only work with ghosts at times things works fine and the system is very stable, BUT if I work with two or three spectres by now I have a really strange (maybe for me) problem with the timeout.

  This is due to an incorrect number of pulses:

  If I work with two device then I need to produce pulses of 200 each 20ms but my spectrometers provide data every 40ms, but I need to equip every 20ms

  If I work with threedevice and then I need to produce pulses of 300 each 20ms but my spectrometers to obtain data each 60ms but I need to equip every 20ms

  Thus, in this way, I lose the synchronization of the three councils.

  An options may be to use a dedicated pc for each device

  I acquire the signal via usb and the problem is maybe duo to the bus

  I think maybe the problem is duo to the vi block! Maybe I can use single istance at times when I call the procedure

  Thank you

  I just solved the problem: it was a problem with reentrancy

  Default LabVIEW use not reentrant execution

• I think I'll have problems with registry - I can't add or remove programs, when I rebooted until windows starts I have SEEN 150/150 REGISTER... any ideas

  I had to restore my computer from these problems, had problems with wire4less router cause took off so wireless cause I got no internet.  Has worked with the provider, Charter and got back internet but do not add or remove programs - have problem with printer HP TrayApp, s if lack but cfan can't add restricted cause - restricted user-entered and gave access, but still does not work.  Will try F8 and start the repair to see if it works.  Any ideas?  HELP... l.Thanks

  Thanjs - I did take it to someone to clean.  Always have problemd with printer but am back to him.  Thanks for all your suggestions.  I guess I've done too many bugs diffedrent and messed up.

• Problems with itunes and can not locate network %APPDATA%/

  I'm having a problem with trying to download itunes 10 because he repeats to me he couldn't locate network %APPDATA%/ when he tries to install quicktime with itunes 10 Installer. I can install quicktime very well, but even this will not fix the itunes 10 installation problems.

  I had installed on my computer since then two games and work very well. The other could not install correctly, but the appdata question had nothing to do with it.

  I use windows vista Basic.

  Hello

  Follow the information from apple to the link below

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  http://support.Apple.com/kb/HT1923

  and or ask for their support of itunes

  http://www.Apple.com/support/iTunes/

  Also try the discussions of apple itunes

  http://discussions.Apple.com/category.jspa?categoryID=149

• Problem with Standard VGA graphics card

  Hello everyone!

  I have problem with Standard VGA Graphics Adapter.

  State of the device: this device cannot start (code 10)

  My specs are:

  AMD Radeon HD 6470M

  Intel Core i3 - 3110 M CPU @ 2.40 GHz 2.40 GHz

  RAM: 4.00 GB (2.41 GB usable)

  Type of system: operating system Windows 7 32-bit

  Can someone help me with this problem! I can't start my games!

  Please, I beg you! Everyone!

  Hello:

  When you see the label adapter VGA Standard, this means that the graphics driver is not installed or improperly installed.

  Go to the page of the driver and support for your laptop and install the graphics driver from AMD W7 32 bit.

• GREP to find the end of the name of the author of history (problems with several lines)

  

  I don't get these documents and I can understand how to use GREP to search for each source name/quote author. I have problems with the above example. I think it's because of paragraph returns, possibly something to do with the comma. I've fiddled around for an hour, tent multi and expressions of the one line and still can not understand.

  It's what works for the most part:

  (? < = \r)\s*[–][-\u\l]+(?=\Z)

  

  If you can count on having the line beginning with an en dash (possibly after an unused space), this should do it:

  ^\s*~=.+\Z

  The ^ indicates start of a line, while (?)<=\r) relies="" on="" a="" hard="" return:="" ^="" will="" also="" match="" start="" of="" story,="" and="" all="" sorts="" of="" hard="" page/column="">

  Do not "anticipate" \Z; Since it is also an indicator of the place, like ^ and $, there can never be "selected" in the traditional sense of the term. (Which is the reason why allowing you a \r postanalyse, because * will * be selected if not).

  Your example of Homer Simpson was rejected because of the hard return and the comma - or were in your list of approved characters.

  I think opt for the period more ('get all') should work, but it is not - by default - search returns. This is where the modifier of Single-Line can help you. A brief description of the single-line Mode is that it allows the period correspond to a return as well. the history is considered one long line, with possibly a few \r codes that are not treated as special programs.

  It will work for GREP search only:

  ( ? s)^\s*~=.+\Z

  but not for the GREP styles. A GREP style still works only for a single paragraph; You can have a \r code anywhere in the expression. Oddly enough, TI work if you draw a soft line break in this last line - the strange thing is, the style GREP also needs (? s), so, apparently, at this level the soft line break is also considered a line break.
  Furthermore, your example of Homer Simpson has an additional line below, and causing trouble because there is no \Z just after what you want to find. Allowing returns will add that last line in your search, which may not be what you want either. Replace the hard return by a soft will also solve part.

• lately and I don't know why I see a pop up of a problem with the script. can some1 help me?

  There is a pop up of a problem with the script. He asked end and contuniue the script. I didn't have this problem before. Please help me this is getting really annoying. He asks a lot

  I changed a theme and almost never have a problem again...

• I have a problem with my location network cards and I can not find my LAN on my PC.

  I can't find my LAN

  Hello! Im having trouble with the location of my network cards and I can not find my LAN on my pc - I have recently updated my software with phone system automated.

  Hello

  Perform the steps in the article mentioned below and see if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Hope this information helps.