Problem with site settings

Similar Questions

• Problem with power settings during the opening of Windows Media Player 12

  Original title: power options Windows Media Player Exchange

  WMP 12 of opening causes the power option for monitor turn-off time to return even if the time is 2 hours 15 minutes. Tried to reset the value, value save, all electrical energy plans by making the same, nothing is done.  Other set values, for example disk hard turn off (never set) will be defined and stay together.  Would have someone seen this kind of thing?   Operating system is Win7 Professional 32-bit.  All available updates have been installed.

  Hi Jim,.

  Please contact Microsoft Community. I understand that you have a problem with the power settings when opening Windows Media Player 12. I've surely you will help solve this problem.

  To better understand the issue, I would need more information on your side.

  1. The problem only occurs when Windows Media Player is opened?
  2. Did you the latest changes on the computer before this problem?

  This problem might have occurred because of these reasons:
  1. incorrect power settings.
  2 conflict between third-party applications.

  I suggest you try the steps listed here and check if it helps:

  Method 1:
  Run Troubleshooter of power that will check if the basic power settings are set properly or not.

  Open the troubleshooter of power
  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Method 2:
  If the problem persists, restore to the default settings for power management. Check if it helps.

  Note: try the following steps only if you have not tried before.

  Step 1:

  To restore to the default settings power management, follow these steps:

  1. Click Start.
  2. In the search programs and files box, type cmd.
  3. Right click on CMDand then click run as administrator.
  4. At the command prompt, type powercfg - restoredefaultschemesand then press ENTER.
  5. At the command prompt, type exit to exit the command prompt.
  6. Restart the computer.

  Step 2:

  Once the plan of power reset by default, you can create a new power plan and the same customize according to your needs.

  Power plans: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows/power-plans-FAQ#1TC=Windows-7

  Method 3:
  If the problem persists, set up the computer in a clean boot state, and check if that helps. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot in Windows:
  http://support.Microsoft.com/kb/929135/en-us

  Note:  After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• Problem with date settings

  Hi all. I have the problem with the Sub statement
  
  
  SELECT THE DOUBLE TO_DATE(:P_DATE,'DD/MM/YY')
  
  it get me ' 10 / 04/2012 '
  
  but I want 10/04/12 not as above.
  
  I saw that DD/MM/YY not like 'DD/MM/YYYY' still it gives me 10/04/2012 why can someone explain?
  
  Kind regards
  Uraja

  To_Date will always give you the output date format-based nls...

  Instead, you can try

  SELECT to_char (TO_DATE(:P_DATE,'DD/MM/YY'), ' DD/MM/YY') FROM DUAL;

  or replace nls_Date_format jj/mm/aa

• Problem with site Web page - coding errors - HELP

  Hello

  I'm having a problem with one of my pages which becomes corrupt eveytime I update the model. I get a reapeat of the template on the page and the following text is selected in the code.

  Can you tell me what he's trying to tell me?

  

  Here is what the page has to look like:

  

  Here's what it becomes, it seems to duplicate the page and shift right:

  

  Looking at code for the linked page once again, I see that the problem is not with the model, it is with the code in an editable region of the child page.  So, on this page, change it.

  http://www.Macromedia.com/schemes/data/string/">

  

  on this subject.

  

  and save the page.

  In the model of change.

  

  on this subject.

  
  

  

  and save it in allowing the change to propagate.

  Having done this, page of your child behaves correctly now?

  In addition, you can solve this problem in the pages of the child and in the model-

  [email protected]"> contact" > mailto:clu [email protected]"> contact form '"»

  probably should be-

  [email protected]"> contact form.

• I have a problem with the settings of Internet Explorer.

  Original title: inter explore crashes me to use internet Dungeon putiing internetexplorersecurity windo clubfoot it get stalled and I must go to controlalt and delete to delete

  cannot open Internet anthing box-internet explore security reappear will let me not control one of the boxes he's loose and I have to go to control the alt and delete task to delete or close internet please help me solve thi question I can not open before anything else without popping up the window

  Dorothy salvation,

  1. what version of Internet Explorer is installed on your computer?

  2 is the issue limited while accessing any particular Web site?

  This problem can occur because Internet Explorer or modules settings.

  Try the following and see if it helps.

  Method 1:

  I suggest you to disable the popup blocker and check if it helps.

  a. open Internet Explorer by clicking the Start button, and then click Internet Explorer.

  b. click on tools, click on pop-up blocker and then click block pop-up windows settings.

  (c) in the address of website to allow box, click the Web site that you want to remove from the list and then click on remove.

  d. Repeat step C for each Web site that you want to remove from the list of Web sites that display pop-up ads. When you are finished, click Close.

  See the following Microsoft article:

  Blocker Internet Explorer: Frequently asked questions: http://windows.microsoft.com/en-US/windows7/Internet-Explorer-Pop-up-Blocker-frequently-asked-questions

  Method 2:

   

  I suggest to reduce the levels of security of Internet Explorer and check to see if it helps.

  Change the security settings for Internet Explorer: http://windows.microsoft.com/en-US/windows7/Change-Internet-Explorer-Security-settings

   

  
  Method 3:

  If the problem persists, I suggest you to reset Internet Explorer default settings.

  Reset the Internet Explorer settings: http://windows.microsoft.com/en-IN/internet-explorer/change-ie-settings#ie=ie-8

  Keep us updated on the status of the issue.

• Problems with site-to-site vpn

  Hello world

  I recently received the mission assigned to the site to site vpn configuration and this is my first time. I'm trying to set up a vpn with pix 501 but short questions site. I managed to get that below, but I'm stuck now and do not know what could be the problem. Here's the debug output.

  Any help is greatly appreciated on what could be the potential problem.

  -AK

  ISAKMP (0:0): sending of NAT - T vendor ID - rev 2 & 3
  ISAKMP (0): early changes of Main Mode
  crypto_isakmp_process_block:src:208.249.117.203, dest:70.91.20.245 spt:500 dpt:500
  Exchange OAK_MM
  ISAKMP (0): treatment ITS payload. Message ID = 0

  ISAKMP (0): audit ISAKMP transform 1 against 20 priority policy
  ISAKMP: 3DES-CBC encryption
  ISAKMP: hash SHA
  ISAKMP: default group 2
  ISAKMP: preshared auth
  ISAKMP: type of life in seconds
  ISAKMP: duration of life (basic) of 28800
  ISAKMP (0): atts are acceptable. Next payload is 0
  ISAKMP (0): load useful treatment vendor id

  ISAKMP (0): ITS been pre-shared key, using id ID_IPV4_ADDR type authentication

  to return to the State is IKMP_NO_ERROR
  crypto_isakmp_process_block:src:208.249.117.203, dest:70.91.20.245 spt:500 dpt:5
  00
  Exchange OAK_MM
  ISAKMP (0): processing KE payload. Message ID = 0

  ISAKMP (0): processing NONCE payload. Message ID = 0

  ISAKMP (0): load useful treatment vendor id

  ISAKMP (0): load useful treatment vendor id

  ISAKMP (0): provider v6 code received xauth

  ISAKMP (0): load useful treatment vendor id

  ISAKMP (0): addressing another box of IOS!

  ISAKMP (0): load useful treatment vendor id

  ISAKMP (0): addressing a VPN3000 concentrator

  ISAKMP (0): ID payload
  next payload: 8
  type: 1
  Protocol: 17
  Port: 0
  Length: 8
  ISAKMP (0): the total payload length: 12
  to return to the State is IKMP_NO_ERROR
  crypto_isakmp_process_block:src:208.249.117.203, dest:70.91.20.245 spt:500 dpt:5
  00
  Exchange OAK_MM
  ISAKMP (0): processing ID payload. Message ID = 0
  ISAKMP (0): HASH payload processing. Message ID = 0
  ISAKMP (0): keep treatment alive: proposal = 32767/32767 sec., real = 3276/2 sec.

  ISAKMP (0): load useful treatment vendor id

  ISAKMP (0): Peer Remote supports dead peer detection

  ISAKMP (0): SA has been authenticated.

  ISAKMP (0): start Quick Mode changes, 413131006:189fe0feIPSEC (key_e M - ID
  (Display): had an event of the queue...
  IPSec (spi_response): spi 0x3e9451fa graduation (1049907706) for SA
  from 208.249.117.203 to 70.91.20.245 for prot 3

  to return to the State is IKMP_NO_ERROR
  ISAKMP (0): send to notify INITIAL_CONTACT
  ISAKMP (0): sending message 24578 NOTIFY 1 protocol
  Peer VPN: ISAKMP: approved new addition: ip:208.249.117.203/500 Total VPN peer: 1
  Peer VPN: ISAKMP: ip:208.249.117.203/500 Ref cnt is incremented to peers: 1 Total VPN
  Peers: 1
  crypto_isakmp_process_block:src:208.249.117.203, dest:70.91.20.245 spt:500 dpt:5
  00
  ISAKMP (0): processing DELETE payload. Message ID = 3425658127, spi size = 16
  ISAKMP (0): delete SA: src 70.91.20.245 dst 208.249.117.203
  to return to the State is IKMP_NO_ERR_NO_TRANS
  ISADB: Reaper checking HIS 0xac149c, id_conn = 0 DELETE IT!

  Peer VPN: ISAKMP: ip:208.249.117.203/500 Ref cnt decremented to peers: 0 Total VPN
  Peers: 1
  Peer VPN: ISAKMP: deleted peer: ip:208.249.117.203/500 VPN peer Total: 0IPSEC (ke
  y_engine): got an event from the queue.
  IPSec (key_engine_delete_sas): rec would remove the ISAKMP notify
  IPSec (key_engine_delete_sas): remove all SAs shared with 208.249.117.203
  IPSec (key_engine): request timer shot: count = 2,.
  local (identity) = 70.91.20.245, distance = 208.249.117.203.
  local_proxy = 0.0.0.0/0.0.0.0/0/0 (type = 4),
  remote_proxy = 206.200.22.0/255.255.255.0/0/0 (type = 4)

  Hello

  Newspapers, I see you are using a VPN 3000 Concentrator as the remote vpn end point. Now, also of the debugs next section is interesting:

  local (identity) = 70.91.20.245, distance = 208.249.117.203.
  local_proxy = 0.0.0.0/0.0.0.0/0/0 (type = 4),
  remote_proxy = 206.200.22.0/255.255.255.0/0/0 (type = 4)

  -Looks like our traffic interesting PIX and the hub are not mirrors of each other, and does not. Can you please paste the PIX here cryptographic access lists, so that I can analyze the entries.

  -Also, please make sure that you have followed all the steps during the vpn configuration according to the following links:

  If your PIX is running at version 7.x and more: http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008064a06f.shtml

  If your PIX is running version 6.3.x: http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a00800949d2.shtml

  Once you check the config on PIX and concentrator, please provide me with the output of "sh cry isa his" and "sh cry ipsec his ' of the PIX. With this release, we can continue to troubleshoot if there is more questions.

  Let me know if this can help,

  See you soon,.

  Christian V

• Problem with Site-to-Site VPN. VPN tunnel is broken but can ping

  OK, so I am trying to understand why I can't not only appears when I sh crypto isakmp his or sh crypto ipsec his. I did the basic to site vpn settings to another and I can't ping on both networks fine no problem. So, when I ping from one pc to the address 172.16.0.0 192.168.0.0 network network there is no problem at all because the pings are very well received. But when I go to sh crypto isakmp sa, there's simply nothing and I can't for the life of understand me why. I watched my sh run for both routers and all seems well, but I guess I could be overlooking something. I would really appreciate if someone could help me to diagnose this problem.

  I've attached my plotter file of package and two routers use the binary password. I also have the sh run two routers also attached.

  I'm not on any of the router 172.16.0.0/24 only 172.16.0.0/16 and I think that is the question.

  In Crypto ACL you have on the router of branch:

  !

  S2S-VPN-TRAFFIC extended IP access list

  Licensing ip 192.168.0.0 0.0.0.255 172.16.0.0 0.0.0.255

  If it should not be:

  !

  S2S-VPN-TRAFFIC extended IP access list

  Licensing ip 192.168.0.0 0.0.0.255 172.16.0.0 0.0.255.255

  and coursed mirrored on the main router.

  If this isn't the case, you are saying that some ping between 192.168.0.x and 172.16.0.x is going ok. Can you please indicate exactly that one? I could see that you have attached a package tracer, but I couldn't open it.

• Updates cause problems with power settings

  Since the last update flash drive, my power setting is denied.

  It's on white screen after 10 min. of no activity. After viewing something with flash player, when my screen is supposed to be empty, it white for a split second just now and to do this, every 10 minutes (the time period I put). I then go into the display properties > screen saver > power settings and reset her turn off monitor option. Can you please give me a solution for this?

  I asked this question in January and got a response to uninstall and reinstall the Flash Player (if anyone from Adobe is preparing it - file for my application number has been 181390787)
  That fixed the problem for a while (until the next update), but now it is happening again.  I can't find a way to return to the customer support portal and submit the problem again.  I can enter the portal and read my case closed, but I can't open a new one.
  This gets really annoying, I discovered a lot of video tutorials that use Flash Player and watch You-tube frequently.  Whenever I discover something with Flash Player, I have to reset my preferences of power.  I really hope someone has a solution for this, what happens now to the computer of my husband as well.  The two systems are:

  Browser: Microsoft IE 8, operating system: Windows XP Professional SP3

  Thank you

  Maybe I finally found a solution, after weeks of tests!

  Also, if you do not have a selected screen saver, you must set its longer time than the monitor turned off.

  To do this, in control panel-> display-> screensaver-> choose a random screen saver-> don't set a loooong time (example 60 min, but more and more that your monitor off time)-> select any screen saver-> and save.

  I really do not know why, just do claim that there is a conflict between flash, screen saver settings and power, but this solution worked for me!

  Let me know if fix you the problem if you read this.

• Satellite M30X-102: problems with foreign settings

  I just bought the laptop M30X-102 of the Germany, but I am from Greece. So everything is in German (which I don't understand), the recovery disk, documentation... So I ask if I can find the revovery disk in English language. How can I re - configure my system with windows English? (I think format...) Thank you...

  Hello

  It is a shame. I know the problem, if you have lost a Toshiba Recovery CD, then you go to a Service partner and sign a solemn declaration (it is a restriction of M$) and you will get a new recovery CD.

  You could ask a Greek Service partner if it is possible to do?

  Hans Bye

• a small problem with the settings

  I use unlock most of the time, but once I did the boss... I found this one is disabled by the administrator, storage policy or encryption credentials... my phone has been never been quantified.
  .
  My 2nd question is that, sometimes, I find a star up right next to the clock, battery... Etc.
  I didn't know this star before upgrade lollipop

  Hi Ahmed_009

  Welcome to the community! Since you are new, please make sure that you have removed from our Forum.

  Do you use an e-mail address of company by chance, as it is a common reason why the phone does not have the 'none' or 'slide' option. If you have not then you can go to settings > Security > clear the credentials. Then reboot the phone & see if 'none' or 'swipe' is displayed.

  A star in the status bar means that you have priority on - to change this simply press the volume button and a pop up window should appear where you can change it.

  Keep us updated

• Problems with site-to-site vpn with of the asa 2

  I tried different ways so that this works, but failed. After 8 hours, I literally have a bad headache and have to step away for a minute.  I realize I need to ping between the tunnels mentioned, but still can not to. can someone take a look and tell me where I have gone wrong?  Im trying to configure a site to site vpn between:

  ASA_A

  external interface 5.179.17.66

  inside the interface 10.1.1.1

  ASA B

  external interface 5.81.57.19

  inside the 10.1.2.1 interface

  Frist why do you have two DGs on box -

  Route outside 0.0.0.0 0.0.0.0 5.179.121.65 1

  Route outside 0.0.0.0 0.0.0.0 5.179.17.65 1

  Attach the two end then it should work.

  Thank you

  Ajay

• Problems with site. Help?

  I'm trying to start another site, after having one already, and I can't seem to cross. I tried literally everything I can possibly think, but I am still confused on how to get this site on the remote server. Any help?

  This can help How to download your Web Site using DreamWeaver tutorial

• Problem with Site - domain will not work without "www."

  When you visit the Web site without the WWW prefix, you are taken to a "process of development . "page I have tells me the webmaster has not added a Web site on the server. "

  However, if you put the prefix www it loads immediately. Just published on-line site and I realized my nameservers of Godaddy for iPage. Any ideas on why this is happening?

  
  

  http://mtbamg.com/

  http://www.mtbamg.com/

  Hello

  Just check the links on my machine and without www works.

  

  In my view, clear the browser cookies that will fix it on your machine.

  Kind regards

  Vivek

• Vista problem with site management?

  Since I moved to my new Vista computer Dreamweaver 8, remember login and password for FTP in managing the Sites. I need to change the site everytime I open Dreamweaver. Is it because of Vista? Others have this experience?

  This Technote apply to you?
  http://www.Adobe.com/cfusion/knowledgebase/index.cfm?id=785362aa

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "craigtb" wrote in message
  News:f00c58$DMS$1@forums. Macromedia.com...
  > I installed the patch but when I run the Dreamweaver application, it still says that it is
  > 8.0.
  > I have reinstalled several times - whenever he said that he installed
  > successfully
  > - but the version number in everything done does not update. Reset
  > has
  > n no effect either.
  >

• Problems with the album settings.

  I'm having a problem with the settings of my album. When I "crop" an image to select a background image, I had accidentally selected always use and now I can't change it. Is there a way of?

  In this case, try the settings-applications-all, press 3 dots (settings) and reset the application preferences.