Satellite M30X-102: problems with foreign settings

Similar Questions

• Satellite M30x-124 - problem with Seagate momentus 160 GB

  I have Toshiba Satellite M30x 124 and change the hard drive. I've set up Seagate momentus 160 GB but do not work. BIOS detects the hard drive but when I put the cd with windows xp and I want to install windows xp, nothing to do. Where to find the bios with attendance more hard drive
  Linux is the work, but windows... :/

  Sorry, but my English is not good.

  Hello

  The clear issue and can be resolved very easily:
  Reason:
  You use a non compatible HARD disk

  Solution;
  Replace the HARD drive with the compatible!

  The laptop seems to be supplied wit a 80 GB IDE HDD.
  I advise to use the same or a HARD 100 GB / 120GB.

  Concerning

• Satellite M30X-102: power question - unit suddenly turn off

  Hello!

  I have a portable Satellite M30X-102 and about a year ago and a half months he started to turn off suddenly. First of all, it looked like an overheating problem, but also disabled directly after that I pressed the power button and sometimes it worked 10 hours without any problem, also, when it is off, power LED was flashing until I have Nations United - and replugend the power cable. If the battery was, he was immediately released.

  I sent it to repairs. They only cleaned the cooler and changed the dough to thermal conductivity and for a few days, the laptop worked normally, but about half hours ago, it happened again. I am convinced now that this is a power supply problem, possibly the power cable.

  You have any suggestions of what I could do, or should I send it back with a note that it is a power supply problem?

  Thank you

  [Edited by: admin March 23 06 06:56]

  Hello

  In my opinion, you should contact the service because it can start diagnostic tests.
  For me, this looks like an electronic malfunction of power supply.
  If the laptop has been repaired it there a few days/weeks, so I guess that the guarantee is valid.

• Satellite M30x-102, big problems!

  Hey, I'm from Belgium and the Dutch is the language on my laptop, so I'm going to try to translate the errors in English

  This is my problem:
  The last two days, my laptop is very slow and more it hangs and shows me this blue screen with this error:
  Kernel_stack_inpage_error

  error code; 0000007, parameter1: c03e1948, parameter 2: c000000e, parameter3: f8652302, parameter4: 1304e860.
  or
  Kernel_stack_inpage_error

  error code; 00000077, parameter1: c000000e, parameter 2: c000000e, parameter3: 00000000, parameter4: 02b 62000

  Yesterday, I received a new blue screen: Unmountable_boot_volume
  I did an analysis avg, Ccleaner and atf cleaner that nothing was found!

  Now, they said, it could be a problem with your HARD drive, so reboot with the cd of Windows XP and repair using chkdsk/r!
  I tried and I got this message: station not found or no cd-rom in the station!
  After that I took the HARD drive out and put his place again!
  Once again I reboot with WXP en cd done chkdsk/r, and then I got this message: one or more irreparable errors found!
  After that I could not start windows XP at all! It remains on the windows at the loading screen!
  Then I tried to format with the Toshiba recovery cd reinstall!
  When he tries to install, I received this message:

  PXE - E61: Media test failure, check cable of
  PXE - MOF: Exit PXE ROM
  Invalid partition table

  Now, I'm desperate!

  BIOS start now: HDD - CD - Removable Devices - initialization of the network

  I hope someone can help me!

  Thank you!

  Replace HARD drive with the new one and all will be OK.
  I'm 99.9% that the HARD drive is faulty.

• Satellite M70-239 - problems with brightness adjustment

  Hello

  I ve got this laptop from my father after I buyed a new. Actually everything´s with him very well. But one thing is a little strange, I think.
  My old laptop and other portable that I had before, has the ability to control things like the brightness of the screen when you connect to load automatically. So not for this one. Nothing happens.

  Windows doesn´t also shows the remaining battery life expectancy and other things like that. These functions are not supported by this guy? I ve installed the latest bios version 1.70, which is available on the official website and I m using Windows XP.

  Someone at - it the same problem and is there a solution for this? Maybe you can help me.

  welcome them

  Hello

  Satellite M70 was delivered with Windows XP edition family, and Windows XP Home typical configuration. I imagine that you have installed all Toshiba tools and utilities, so it must there also have preinstalled Toshiba Power saver.

  He yiou can see profiles of different powers and each of them can be configured separately. Thus, when the laptop is connected to power notebook AC power will be the mode full power. There you can set LCD brightness to the maximum level.
  When the laptop is on battery will then serve others power plan. Compare the settings in two power modes and choose your preferred settings.

  Brightness level can also be changed with the key FN + F6/F7 combination.
  Of course, this will works if all Toshiba tools and utilities are preinstalled.

• Satellite A660 / 07P - problems with my browsers, internet connection

  Hey guys,.

  I just brought a Satellite A660 / 07P.
  I have problems with my browsers, internet connection.

  After a period of time (varies) my browsers stop to connect to internet.
  Skype works fine, as does my download manager and other internet services.

  When I run an internet system restore works again for a period of time, before picking up the handset.
  I used this happens with all browsers (IE, Firefox and Chrome).

  Any help is greatly appreciated.

  Ry ~.

  Hi dude

  Skype works fine. Right?

  This means that the laptop is connected properly to the router and the internet connection has been established successfully.
  I think that a firewall can affect the functionality of the browser. Check the firewall settings.

  In addition you should check if other installed 3rd party tools to affect the functionality of the browser.
  Verify installed tools

  last but not least you could clean the operating system. Use the CCleaner.
  Free is nice tools.

• Satellite A200-1VD: problem with HDD disk

  Hi friends;

  I'm sorry for my bad English:

  I have a problem with my * satellite A200-1VD *, I had with Vista Home edition 2 years ago license. I want to format it, * but I don't have a DVD restore disk * ([http://img96.imageshack.us/img96/5339/discv.jpg]). For this reason, I installed "* TOSHIBA Recovery Disc Creator *" ([http://img109.imageshack.us/img109/6875/toshibarecoverydisccrea.jpg]), but when I run it, * it does not recognize the HDD * and sent me the following message; ([http://img139.imageshack.us/img139/4445/resultattrdc.jpg]). in the second time, I installed "* Recovery Disc Creator *" ([http://img199.imageshack.us/img199/3197/rdcm.jpg]), but it does not recognize the drive too and sent me this message. ([http://img199.imageshack.us/img199/995/rttrcd.jpg]). I do not know how to this problem that * bothers me too well *. Too I would be grateful if you can help me to overcome this problem.

  Don't forget to see the following pictures to understand my problem.

  * - [http://img96.imageshack.us/img96/5339/discv.jpg]
  * - [http://img109.imageshack.us/img109/6875/toshibarecoverydisccrea.jpg]
  * - [http://img139.imageshack.us/img139/4445/resultattrdc.jpg]
  * - [http://img199.imageshack.us/img199/3197/rdcm.jpg]
  * - [http://img199.imageshack.us/img199/995/rttrcd.jpg]

  Thank you very much

  Hello

  At first was a little bit the theory for a better understanding.

  In the latest Toshiba delivered recovery facilities DVD discs with all the new models of laptops. "" Since then, I think, two or three drives of years facilities are not part of the package and recovery image is saved on the HARD disk and the recovery disc can be created using preinstalled "Toshiba Recovery Disc Creator. This recovery image is not saved on a separate recovery partition but on the second partition of HARD drive (data partition E) in the folder called HDDRecovery.
  The screenshot on 1.5 GB WinRE partition has therefore nothing to do with the Toshiba recovery image.

  This creation of recovery operation may work with the factory only settings. with other words, if you change the partition structure, or if you deleted this folder HDDRecovery you won't be able to create the recovery disk or install the operating system using HARD drive recovery option.

  I guess that you do not have this folder HDDRecovery more and because of this, Toshiba Recovery Disc Creator starts with error message. This tool needs direct access to these data recovery to create the drive recovery facilities.

  I think all this bother you much, but it's your fault. Reminder with the trace message is preinstalled on each Toshiba notebook with HDD recovery:
  * Important INFORMATION *.

  * your system is equipped with a hard drive recovery system. If you need to repair your computer in the restaurant to the original factory condition, you can do it directly *.
  * from the HDD (press F8 when you start your computer, choose "Repair your computer" and follow the instructions in the menu) or create a bootable recovery for this fin.* drive carrier

  * Toshiba recommends you create recovery disk medium using the "Toshiba Recovery Disc Creator' to ensure that you are able to restore your computer to the original state that is installed at the factory, even if your computer is severely damaged.*

  What you can do now is to order the new original facilities Toshiba drive under https://backupmedia.toshiba.eu/landing.aspx or you can use the Microsoft installation for the installation of the OS disc. All the necessary drivers, tools and utilities that you can download at Toshiba page under http://eu.computers.toshiba-europe.com for assistance

  If you have any other questions please let us know.

  Bye and good luck.

• Satellite C660-1PH - problem with Chicony USB 2.0 camera

  Hello.

  I recently purchased satellite C660-1PH and I have a problem with my webcam. When I use Skype the image of me is blurred.

  Any ideas? I looked fot the webcam settings and these are all the default ones.
  What do I have to uninstall and reinstall the drivers from scratch?
  Lia

  Hello

  * @ economid *.
  How did solve you this?

  In my case, the protective film has been mounted on the front of the cam.
  I removed it and the photo quality was much better.

• Satellite M30X starting problems

  Hello!

  My Satellite M30X doesn't start normally more. When I press the power button, it turns on, the fan starts, but nothing happens. Or sometimes it takes almost 5 minutes before then the Toshiba logo appears, it begins in place.

  After that, I sometimes get a message that the Smart HD feature has detected a failure in my HD. But not all the time.

  I have Linux and Win XP on my hard drive. When I use Win XP, it starts normally, then after a few minutes, I get the BOD with message IRQL_NOT_LESS_OR_EQUAL. Or sometimes, the system just hangs. If I boot mode safe, everyting works fine.

  On Linux, the system freezes after 30 minutes of use.

  I'm tempted to think that I just need to reformat my HD (I have a 100gig HD of Fujitsu), and everything will be fine. I have to try again. And also once again, on Win XP Safe Mode, everything works very well - I can't even use WLAN, and I am writing this same post! But if it's just a software or an OS problem, why not not my laptop start normally? I mean, why is that sometimes it does not start at all (the Toshiba logo does not appear), and I have to turn off my phone and turn it back on so that it works. Sometimes it is not boot at all, no matter how many times I try it turn on and off. The power on light comes on, fan will start, then fan turns off, light is always turned on and nothing happens. Or it could be caused by a faulty hard drive? Is that why it sometimes does not start at all? But if it is the HD, why is there not a problem in Mode safe?

  It is so weird coz it wasn't a problem before, and he appeared out of the blue.

  Any help will be appreciated! Thank you in advance!

  Hello

  To me, this looks like a hardware problem. I think it works in safe mode because other such graphics card device drivers are not loaded.
  As I know the IRQL error also occurs if the blue screen of death appears on the screen. I think that it us something wrong with the graphics card or the memory modules.
  I think you should ask the AEP from Toshiba for help.

• Connectivity to the Satellite M30X USB problem

  Hello everyone,

  I have a problem with the USB to the Satellite M30X connectivity. I purchased a M30X and had problems with connecting devices of differnet in one of the USB ports.

  I tried to solve his problem and but nothing resolved.

  Goodbye, Meier

  Hello

  Rudi is right. There is a new update of the BIOS and it should solve the problem of USB.

• Satellite C850 - found problems with the networking and the FN key

  Hey everybody,

  I work on a Satellite Toshiba C850, that my parents recently bought and spin in a certain number of questions.

  (1) wireless won't connect to my network. Have done the following: verified by connecting on two other computers, reset the router, the open network, reset the map, reinstalled the realtek drivers, checked the settings in the networking of Toshiba Utilities. End result is he's going to try, and fail. Wired LAN works fine.

  (2) FN key does not work. Have you checked the region and it is OK, have tried to use the Flash cards - no change, checked with the screen keyboard and can check the FN key does not register.

  I noticed that the first problem is common, but there are obvious positive results. If anyone can offer any assistance, I would appreciate it a lot.

  Before you begin to discuss your problems can you please tell us what OS you are using?
  Are you using the original OS that you got with your laptop? I mean original recovery image has been tested and works correctly, with the factory settings that all should especially the FN keys.

  1 / What do you mean with refusing? your WLAN is visible for your laptop?

  2 / if there is problem with the feature keys FN and you use Win7 try please reinstall extra package from Toshiba.

• Satellite A60-102: error with an autodesk autocad 2006

  Hi all;
  Autodesk autocad 2006, I installed on my computer laptop satellite SA60-102, but it did not run and it displays an error saying 'DBX CASE 0' with 'ok', although I installed it on my desktop pc and it worked very well.

  I need your help ASAP
  Naim Kobaissy

  Hello

  Connection to the website http://www.cadchat.com/forums/lofiversion/index.php/t2443.html
  You may become Information for the (CASE of DBX 0) problem with AutoCAD 2006. It is a Site of cat Cad.

  By

• Satellite Pro L10 problem with Ports COM/Hyperterminal & Bluetooth

  Hello
  I have the following problems with the above machine:

  (1) I have attached an external series COM port to the machine. However, I can not connect to the COM Port using Hyperterminal.
  (2) I installed a Bluetooth USB adapter, but I can't view the protocol configuration.

  Each of the above works perfectly with another laptop that doesn't have a Bluetooth or even a network card.

  Everyone has experienced similar problems. I use WinXP SP2.

  Thank you

  MC

  Hello

  1, in which is the external COM port connected? Is detected in a straight path in Device Manager? What is the error msg to Hyperterminal?
  When connected via PCMCIA, try to change the settings for PCMCIA slot in the BIOS!

  2, try to reinstall the Toshiba Bluetooth stack! There may be some problems. The MS Bluetooth stack does not work properly with the Toshiba devices and one of the earlier Toshiba Bluetooth stack is not signed by Windows XP Service Pack 2!

  Hans Bye

• Satellite C875-S7304 = problem with activation of Win8

  Yesterday I bought Toshiba Satellite C875-S7304 but I have the problem with the activation of windows 8 - 0xC004C003 error... Anyone has the same problem?

  How can I fix that?

  The error * 0xC004C003 * means this:
  + The activation server determined the specified product key is in use. +

  Please read the workaround solutions posted by Microsoft:
  http://support.Microsoft.com/kb/938450
  and
  http://support.Microsoft.com/kb/931276

  Otherwise, try also this workaround postponed in this Toshiba document:
  [Windows 8 is not automatically enabled after the first start of your new notebook | http://aps2.toshiba-tro.de/kb0/TSB2A03ET0000R01.htm]

• Satellite Pro C850 - problems with WiFi after Windows update 8.1

  Hello

  I was wondering if someone could give some advice on a problem I have.

  Had an adjustable C850 Pro for a few months and worked well on Windows 8.
  I myself am then harassed and intimidated by Microsoft Update in order to install Windows 8.1 and in a moment of weakness, I succumbed (got sick of the nagging).

  Since that time, my wifi is very intermittent; either I'm on another computer write this and the laptop is essentially not connected to the internet.

  For some reason any (although I didn't try it before), I can not connect via ethernet either, so I think it's probably the driver problems. (I also tried to connect the public wifi but fails).

  I tried to install the driver WiFi Toshiba 8.1 but that has not solved the problem.
  Then I noticed that I'm supposed to install a bunch of drivers in the order.

  Maximum setting to do it, but the first package (associated with bluetooth) said I have to remove the current driver... I try by "turning off", then "Uninstall" but 8.1 seems to re - install automatically and I don't know how to disable this option (I can try to delete the driver file, I guess, but I'm sure 8.1 covered too and will probably launch a drone to try me out ", if I do). *

  Any kind soul there suggestions on a way forward? Pls.

  I see in the instructions of Toshiba Windows Update 8.1 should I have uninstalled the drivers before the update, but there is not much I can do about it now. :(

  Hello

  > I don't see in the instructions of Toshiba Windows Update 8.1 should I have uninstalled the drivers before the update, but there is not much I can do about it now
  All your problems with the Windows 8.1 update related to the fact that you have not upgraded the Windows 8.1 system as recommended by Toshiba.

  Details:
  http://www.Toshiba.EU/innovation/generic/windows8_1-message/

  Solution?
  Back to Windows 8 (reset the system back to factory settings)
  Then, install all updates and patches for Windows 8 and follow along with the upgrade of system as described on the Toshiba Windows 8.1 upgrade page

  On the page of the Toshiba UE driver, you will find all the instruments that must be installed in the correct order and Windows 8.1 driver!