Vista problem with site management?

Similar Questions

• Problem with Lifedrive Manager on a Machine MS Vista

  I used my Lifedrive for a long time since a MS Windows XP Home Office successfully.  This summer, I got a new laptop which has Windows Vista Home Premium.  I am able to use the Palm Desktop software and hotsync for the XP desktop and laptop of Vista.  I am, however, problems with Lifedrive Manager.  Whenever I start the laptop, I get a message that the machine could not initialize "PalmOneRemoteLibrary."  I ignored the message because I could do everything I needed up to today.  When I tried to start the LifeDrive Manager (impetus provided by a message that asked that I install my photos using LifeDrive Manager), I got the PalmOneRemoteLibrary error message.

  I realize that this machine can be a relic, but I really like it, and I did a lot of use of it.  My LifeDrive machine runs Palm OS Garnet 5.4.8.  I recently put a mass of images on the internal drive using 'Training Mode'.

  Am I correct the LifeDrive Manager is inevitably incompatible with Windows Vista, and which is the source of my problem?  Any difficulty that I could try?  Any other ideas?

  Hello blue8star and welcome to the forums of Palm.

  The LifeDrive Manager application, unfortunately, is not compatible with Windows Vista.  Palm said they aren't going to release a update for the abandoned PDA.  (By the way, I have a palmOne LifeDrive and always use it often.)

  To load on the LifeDrive bulk data, you have the right idea, use the Drive Mode.

  Alan G

  Message is about: Treo 755 p (Sprint)

• Problems with the management of the CSC/Cisco (associated with SSO) site

  Dear friends,

  I came across a problem with single sign - on (SSO) used in the Cisco's Web site and CSC which begins to be more and more awkward:

  1. I visit the CSC and connect you to reply to a thread. Then I start to reply to a message.
  2. In response, I need to consult the technical documentation, guides, configuration or other documents on Cisco's Web site. In another tab in my browser, I visit the Cisco's Web site and do my search/navigation.
  3. At some point, Cisco's Web site acknowledges that I am already connected to the CSC and begins to produce URLs with the /partner/ inside component (for example in the search results). By clicking on this URL causes me be redirected to the page of connection again. This is the first question - why do I have to log in again because I am already connected and SSO is supposed to take care of this?
  4. Well, I re-enter my credentials, get connected, access the necessary document, then I go back to my post on the CSC, finish it and submit it. KABOOM - CCS quickly informs me that I am without permission to perform this action, lose my answer in the process! Logging on to the Web site (as described in step 3) Cisco obviously invalid my current session on CSC! I need to connect again to the SCC (until I do that, she considers me as a guest once again, but when I click on the login link, I suddenly make me connected without enter my credentials) and, well, write again my answer. Sometimes, a part is recoverable, but usually, it is only a small fragment.

  Would it not be possible to correct this behavior? I lost a lot of time my lost rewrite responses.

  Best regards

  Peter

  Hi Peter,.

  I wanted to give you a quick update on the two issues.

  First question:

  We are currently working on a long term and short fix for this problem. Unfortunately the long-term solution will be a drawn out effort as we begin our new data of all content in our heritage Center. The team is currently testing the short-term solution, will keep you posted on the progress that I get more details.

  Second question:

  We currently do analysis of the root causes of this problem and give you updated each week on this issue that deploy us the patch.

  Thanks a lot again for you continued support and patience.

  Sainaba.

• Satellite L30: Vista problems with pages minimizing

  Hello

  I just bought the computer Satellite L30 toshiba laptop and I'm having problems with pages to minimize whenever I click on the page. Most of the time it happens when I click on the scroll bar, but it also happens when I click on any part of the page and when im typing.

  It becomes very annoying. I've only had this laptop for about 2 weeks and the problem has been there since the first day. IM runing Windows Vista Home Basic Edition.

  No one knows the cause or how to sort?

  Hi maxien

  Question very, very extraordinary in my view we need to know if there of something wrong with the hardware or software
  You have certainly a few disks; Recovery CD
  Then try to reinstall the whole OS again on the operating system and check if the minimization problem
  Please come back and report the results

• x 32 Vista - problems with periodic updates

  My computer tells me there are 14 new available updates (all are for Microsoft 2010-1 update of definition, 4 security updates and General updates 9). For almost every day of 12/23/11 - today, 15/01/11, I download and install without error.  I then restart my computer and the notification comes up saying that the same 14 updates must be downloaded and installed.

  I have downloaded and run the Microsoft Fix It tool twice, both times he told them there was a problem with the Installation of window and twice, the tool said them that solved the problem.

  Hello

   
  1. What tool Fixit did you run?
  2. What is the exact error code or the message that displayed the Fixit tool?
  
  Visit the following link, download the fixit and run it. Also perform the steps mentioned in the article.
  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339
  
   
  You can read the article on the web page, the link is mentioned below
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Windows Media Player for Vista - problem with encoding

  I'm unable to access the auxiliary encoder Windows Media (WMPEnc.exe) to solve a problem with a Windows Media Player.  I've always been able to convert video files to a portable device and now I have a message that an "unsupported format" is detected.  The player has been bunddled with Windows Vista, so I can't uninstall / reinstall without a full restore of Windows. Have uninstalled/reinstalled that the software of the device, but still does not work.  I hope someone can help.

  Please repost your question in images and video Forum at: http://social.answers.microsoft.com/Forums/en-US/vistapictures/threads where experts in Media Player will be happy to help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem with disk management.

  To increase the size of drive, I installed win 7 64 bit from a cloned on a WD Green 3 TB hard drive backup.  When I go to disk management I have the following: Disk 0: base / system reserve 1.87 GB NTFS healthy, "C:" 2046,13 GB NTFS healthy, no Boot affected 746,52 GB.

  I could not wish 'C' in the unallocated space.  Is this possible and if so, what is the procedure?

  Thanks for the help

  There is a specific problem with windows that imposes a limit of 2 GB on hard drives. This can be overcome by using a GPT partition table, but then needs a UEFI BIOS in order to boot from it.

• Windows vista problems with message hotmail hotmail was not able to complete this form

  When I click on NEW to new email in Hotmail, I get a message from Microsoft, "Windows Live Hotmail was not able to complete this

  request.  Microsoft may contact you about problems that report you. "I can receive emails, etc..  can not change the font or point size of police or fat, etc.

  Hi Mike,.

  Since you are facing problems with Windows Live mail, you can view the query in the Windows Live Forum for assistance.

  Windows Live Support

  For more information, refer to the following links:

  http://windowslivehelp.com/searchresults.aspx?query=Windows%20Live%20Hotmail%20Was%20not%20able%20To%20complete%20this%20&ProductID=1

  http://windowslivehelp.com/searchresults.aspx?query=hange%20font%20or%20font%20size%20or%20bold&ProductID=1

• Problem with creative management account?

  I've been on creative cloud since 01/01/2016 (LR & PS). Last month, I receive a notice from Adobe everytime I open LR, indicating that there is a problem with my account plan and my last payment (June) has not been charged. NO explanation of what the issue actually is, I checked my card information of credit on my account plan, everything correct, even entered the details to make sure.

  Continue to receive this error notice, without any explanation, with the addition of a meter running backward until my account will cease to be active.

  I now have 6 days left.

  I was twice in contact with Adobe helpdesk, twice they promised the team counts would return to me by e-mail.

  So far - no email, no responses, don't explain - and the meter keeps running!

  Use a browser that allows cookies and pop-up windows, please contact adobe for hourly pst support by clicking here and, when it is available, click "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• Problem with site Web page - coding errors - HELP

  Hello

  I'm having a problem with one of my pages which becomes corrupt eveytime I update the model. I get a reapeat of the template on the page and the following text is selected in the code.

  Can you tell me what he's trying to tell me?

  

  Here is what the page has to look like:

  

  Here's what it becomes, it seems to duplicate the page and shift right:

  

  Looking at code for the linked page once again, I see that the problem is not with the model, it is with the code in an editable region of the child page.  So, on this page, change it.

  http://www.Macromedia.com/schemes/data/string/">

  

  on this subject.

  

  and save the page.

  In the model of change.

  

  on this subject.

  
  

  

  and save it in allowing the change to propagate.

  Having done this, page of your child behaves correctly now?

  In addition, you can solve this problem in the pages of the child and in the model-

  [email protected]"> contact" > mailto:clu [email protected]"> contact form '"»

  probably should be-

  [email protected]"> contact form.

• IPSEC VPN from Site to Site - NAT problem with address management

  Hi all

  I have two Cisco ASA 5505 performing of IPSEC Site to Site VPN. All traffic inside each firewall through the VPN tunnel and I have full connectivity. From site A, I can connect to the inside address of the ASA at the site B and launch of the ASDM or SSH, etc.

  The problem I have is when I'm logged on the ASA site B management traffic is given the external address. I created this as interesting traffic to get it to go through the VPN but I need to use the inside address of ASA B. The following is possible:

  • If I can make the ASA Site B to use inside interface as its address management (I already have management access to the inside Interface)
  • I have NAT can address external interfaces to Site B before moving through the VPN tunnel management traffic so that it appears to come from Site B inside the address
  • I can NAT VPN traffic as it appears in the Site A for management traffic to Site B on the right address.

  The problem is that my PRACTICE Please also come from this address and I need the application before being on an internal address to even if my CA.

  Thanks for any help.

  Ian

  Thanks, I understand what you are trying to achieve now.

  However, I think that I don't have good news for you. Unfortunately PEIE request can be initiated of the SAA within the interface, as there is no option to start the query from the inside interface. With other features of management such as AAA, logging, you have an option to specify what ASA desired originally to demand from interface, but CEP doesn't have this option.

  Here's how you can configure under the trustpoint crypto, but unfortunately by specifying the interface doesn't not part of option:

  http://www.Cisco.com/en/us/docs/security/ASA/asa84/command/reference/C5.html#wp2262210

• Problems with Recovery Manager and wireless

  Hey everybody,

  I have an a HP Pavilion dv7-1245dx with Vista 64 bit.

  My HARD drive crashed after that the computer was hit. I bought a replacement hard drive, but could not use the HP Recovery Manager because my recovery disks were lost when I recently moved into a new House.

  I managed to get the Vista desktop of base up and running again, but without video card or wireless capability. To resolve this problem, I tried to re - install my drivers for hardware manually via

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2100&LC=en&cc=us&DLC=en&sw_lang=&product=3860...

  However, whenever I try to install Recovery Manager, I get say an error message: "this Setup program cannot be installed on this system, Installation with abandon!" InstallShield.

  Also, I tried to download and install all drivers wireless on the HP site, but I can't always operational wireless capability. Even after that I installed all drivers, Device Manager still does not recognize the wireless device.

  Any thoughts on solutions to these problems? Buy the HP recovery disk or install a new operating system Windows 7 would help solve these problems? Is it possible any other hardware become damaged when the computer was hit, and that is what causes these problems? Thank you.

  -NDEco

  Vidya,

  This problem solved-I had the drivers for the wireless and then updated the rest of the material from there. Thanks again for your help!

  -NDEco

• Problem with Maintenance Manager

  Hello

  I have a Lenovo T61 6457-E3G wth Windows XP. Windows is updated on the latest version available and therefore the lenovo software too.

  Weeks, the problem began:

  • When I shut down the computer the task of Lenovo: 'AWAYSCH' cannot be closed by windows. (So I have to do this on my shot of each stop down)
  • Also failed to start the Maintenance Manager (I pressed the button the Maintenance Manager, but the program does not start, without a description of the problem).

  Can some help me?

  Please refer to this URL: http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70681

  Seems "AwaySch.exe" can't not T61s with Intel GM965 video. This could explain why the application will not launch.

• Problems with site-to-site vpn

  Hello world

  I recently received the mission assigned to the site to site vpn configuration and this is my first time. I'm trying to set up a vpn with pix 501 but short questions site. I managed to get that below, but I'm stuck now and do not know what could be the problem. Here's the debug output.

  Any help is greatly appreciated on what could be the potential problem.

  -AK

  ISAKMP (0:0): sending of NAT - T vendor ID - rev 2 & 3
  ISAKMP (0): early changes of Main Mode
  crypto_isakmp_process_block:src:208.249.117.203, dest:70.91.20.245 spt:500 dpt:500
  Exchange OAK_MM
  ISAKMP (0): treatment ITS payload. Message ID = 0

  ISAKMP (0): audit ISAKMP transform 1 against 20 priority policy
  ISAKMP: 3DES-CBC encryption
  ISAKMP: hash SHA
  ISAKMP: default group 2
  ISAKMP: preshared auth
  ISAKMP: type of life in seconds
  ISAKMP: duration of life (basic) of 28800
  ISAKMP (0): atts are acceptable. Next payload is 0
  ISAKMP (0): load useful treatment vendor id

  ISAKMP (0): ITS been pre-shared key, using id ID_IPV4_ADDR type authentication

  to return to the State is IKMP_NO_ERROR
  crypto_isakmp_process_block:src:208.249.117.203, dest:70.91.20.245 spt:500 dpt:5
  00
  Exchange OAK_MM
  ISAKMP (0): processing KE payload. Message ID = 0

  ISAKMP (0): processing NONCE payload. Message ID = 0

  ISAKMP (0): load useful treatment vendor id

  ISAKMP (0): load useful treatment vendor id

  ISAKMP (0): provider v6 code received xauth

  ISAKMP (0): load useful treatment vendor id

  ISAKMP (0): addressing another box of IOS!

  ISAKMP (0): load useful treatment vendor id

  ISAKMP (0): addressing a VPN3000 concentrator

  ISAKMP (0): ID payload
  next payload: 8
  type: 1
  Protocol: 17
  Port: 0
  Length: 8
  ISAKMP (0): the total payload length: 12
  to return to the State is IKMP_NO_ERROR
  crypto_isakmp_process_block:src:208.249.117.203, dest:70.91.20.245 spt:500 dpt:5
  00
  Exchange OAK_MM
  ISAKMP (0): processing ID payload. Message ID = 0
  ISAKMP (0): HASH payload processing. Message ID = 0
  ISAKMP (0): keep treatment alive: proposal = 32767/32767 sec., real = 3276/2 sec.

  ISAKMP (0): load useful treatment vendor id

  ISAKMP (0): Peer Remote supports dead peer detection

  ISAKMP (0): SA has been authenticated.

  ISAKMP (0): start Quick Mode changes, 413131006:189fe0feIPSEC (key_e M - ID
  (Display): had an event of the queue...
  IPSec (spi_response): spi 0x3e9451fa graduation (1049907706) for SA
  from 208.249.117.203 to 70.91.20.245 for prot 3

  to return to the State is IKMP_NO_ERROR
  ISAKMP (0): send to notify INITIAL_CONTACT
  ISAKMP (0): sending message 24578 NOTIFY 1 protocol
  Peer VPN: ISAKMP: approved new addition: ip:208.249.117.203/500 Total VPN peer: 1
  Peer VPN: ISAKMP: ip:208.249.117.203/500 Ref cnt is incremented to peers: 1 Total VPN
  Peers: 1
  crypto_isakmp_process_block:src:208.249.117.203, dest:70.91.20.245 spt:500 dpt:5
  00
  ISAKMP (0): processing DELETE payload. Message ID = 3425658127, spi size = 16
  ISAKMP (0): delete SA: src 70.91.20.245 dst 208.249.117.203
  to return to the State is IKMP_NO_ERR_NO_TRANS
  ISADB: Reaper checking HIS 0xac149c, id_conn = 0 DELETE IT!

  Peer VPN: ISAKMP: ip:208.249.117.203/500 Ref cnt decremented to peers: 0 Total VPN
  Peers: 1
  Peer VPN: ISAKMP: deleted peer: ip:208.249.117.203/500 VPN peer Total: 0IPSEC (ke
  y_engine): got an event from the queue.
  IPSec (key_engine_delete_sas): rec would remove the ISAKMP notify
  IPSec (key_engine_delete_sas): remove all SAs shared with 208.249.117.203
  IPSec (key_engine): request timer shot: count = 2,.
  local (identity) = 70.91.20.245, distance = 208.249.117.203.
  local_proxy = 0.0.0.0/0.0.0.0/0/0 (type = 4),
  remote_proxy = 206.200.22.0/255.255.255.0/0/0 (type = 4)

  Hello

  Newspapers, I see you are using a VPN 3000 Concentrator as the remote vpn end point. Now, also of the debugs next section is interesting:

  local (identity) = 70.91.20.245, distance = 208.249.117.203.
  local_proxy = 0.0.0.0/0.0.0.0/0/0 (type = 4),
  remote_proxy = 206.200.22.0/255.255.255.0/0/0 (type = 4)

  -Looks like our traffic interesting PIX and the hub are not mirrors of each other, and does not. Can you please paste the PIX here cryptographic access lists, so that I can analyze the entries.

  -Also, please make sure that you have followed all the steps during the vpn configuration according to the following links:

  If your PIX is running at version 7.x and more: http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a008064a06f.shtml

  If your PIX is running version 6.3.x: http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a00800949d2.shtml

  Once you check the config on PIX and concentrator, please provide me with the output of "sh cry isa his" and "sh cry ipsec his ' of the PIX. With this release, we can continue to troubleshoot if there is more questions.

  Let me know if this can help,

  See you soon,.

  Christian V

• Problem with Update Manager

  My system is running on VMware vSphere 5.1 (most recent) U1.

  I tried to update the host ESX (host State), but it failed with the error message:

  Patches of the scene to entity rvc-esx-01

  The host returns esxupdate error code: 15. The package manager transaction is not successful. Check the Update Manager logs and logs esxupdate for more details.

  I checked the esxupdate.log and there are many messages of error as follows. Please help me to identify the problem.

  I thank you very much.

  2013 05-28 T 06: 48:27Z esxupdate: HostInfo: DEBUG: check the file system on altbootbank...

  2013 05-28 T 06: 48:27Z esxupdate: vmware.runcommand: INFO: RunCommand called with: args = "[' / sbin/dosfsck ', '-a ', '-v ',' / dev/disks/naa.600508b1001cfd08a4849f06984fd8a2:5'] ', outfile = 'None', returnoutput = 'True', timeout ="0,0 "."

  2013 05-28 T 06: 48:27Z esxupdate: HostInfo: DEBUG: dosfsck dating 1

  Output: dosfsck 2.11 (March 12, 2005)

  dosfsck 2.11, 12 March 2005, FAT32, LFN

  Check the last sector of the file system, we can access

  Content of boot sector:

  ID of the system "MSDOS5.0".

  Byte media 0xf8 (hard drive)

  512 bytes / logical sector

  4096 bytes per cluster

  2 areas

  First FAT starts at byte 1024 (sector 2)

  2 fatty acids, 16-bit entries

  128000 bytes per FAT (= 250 sectors)

  Root directory begins at byte 257024 (district 502)

  512 root directory entries

  Data area starts at byte 273408 (sector 534)

  63929 data clusters (261853184 bytes)

  64 heads, 32 sectors/track

  0 hidden sectors

  total 511968 areas

  Fats are distinguished, but seem to be intact. Using FAT first.

  imgdb.tgz

  Contains a free cluster (39115). Assuming that the expressions of folklore.

  imgdb.tgz

  File size is 32029 bytes, the length of string cluster is 0 bytes.

  Truncate a file of 0 bytes.

  s.V00

  File size is 119879581 bytes, the length of string cluster is 109858816 bytes.

  File truncation

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: an exception error esxupdate was taken:

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: Traceback (most recent call changed):

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: file ' / usr/sbin/esxupdate ", line 216, hand-held

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: cmd. Run()

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: File "/ build/mts/release/bora-1065491/bora/build/esx/release/vmvisor/sys/lib/python2.6/site-packages/vmware/esx5update/Cmdline.py", line 144, in the term

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: File "/ build/mts/release/bora-1065491/bora/build/esx/release/vmvisor/sys/lib/python2.6/site-packages/vmware/esximage/Transaction.py", line 243, in InstallVibsFromSources

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: File "/ build/mts/release/bora-1065491/bora/build/esx/release/vmvisor/sys/lib/python2.6/site-packages/vmware/esximage/Transaction.py", line 345, in _installVibs

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: File "/ build/mts/release/bora-1065491/bora/build/esx/release/vmvisor/sys/lib/python2.6/site-packages/vmware/esximage/Transaction.py", line 388, in _validateAndInstallProfile

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: File "/ build/mts/release/bora-1065491/bora/build/esx/release/vmvisor/sys/lib/python2.6/site-packages/vmware/esximage/HostImage.py", line 639, at the stage

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: File "/ build/mts/release/bora-1065491/bora/build/esx/release/vmvisor/sys/lib/python2.6/site-packages/vmware/esximage/Installer/BootBankInstaller.py", line 672 in StartTransaction

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: File "/ build/mts/release/bora-1065491/bora/build/esx/release/vmvisor/sys/lib/python2.6/site-packages/vmware/esximage/Installer/BootBankInstaller.py", line 302, in Recover

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: InstallationError: ("," there was a file system on altbootbank of error checking, see log for details ".)

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: DEBUG: < < <

  2013 05-28 T 06: 48:32Z esxupdate: vmware.runcommand: INFO: RunCommand called with: args = ' [' / sbin/esxcfg-advcfg ', '-q', '-g', ' / UserVars/EsximageNetTimeout "]', outfile = 'None', returnoutput = 'True', timeout ="0.0 ".

  2013 05-28 T 06: 48:32Z esxupdate: vmware.runcommand: INFO: RunCommand called with: args = ' [' / sbin/esxcfg-advcfg ', '-q', '-g', ' / UserVars/EsximageNetRetries "]', outfile = 'None', returnoutput = 'True', timeout ="0.0 ".

  2013 05-28 T 06: 48:32Z esxupdate: vmware.runcommand: INFO: RunCommand called with: args = ' [' / sbin/esxcfg-advcfg ', '-q', '-g', ' / UserVars/EsximageNetRateLimit "]', outfile = 'None', returnoutput = 'True', timeout ="0.0 ".

  2013 05-28 T 06: 48:32Z esxupdate: esxupdate: INFO: -.

  Command: scan

  Args: ["scan"]

  Options: {'nosigcheck': zero, 'Retry': 5, "loglevel": zero, 'cleancache': None, 'viburls': zero, 'meta': ['http://172.29.137.20:9084/vum/repository/hostupdate/csco/csco-VEM-5.1.0-metadata.zip','http://172.29.137.20:9084/vum/repository/hostupdate/vmw/vmw-ESXi-5.1.0-metadata.zip'], 'proxyurl': None, 'timeout': 30.0, "cachesize": zero, "Valentina": True, 'maintenancemode': None}

  2013 05-28 T 06: 48:32Z esxupdate: BootBankInstaller.pyc: INFO: value not recognized 'title = loading VMware ESXi' in boot.cfg

  2013 05-28 T 06: 48:32Z esxupdate: BootBankInstaller.pyc: INFO: /altbootbank/boot.cfg: bootstate goes from 0 to 3

  2013 05-28 T 06: 48:33Z esxupdate: vmware.runcommand: INFO: RunCommand called with: args = "[' / sbin/bootOption ', '-rp'] ', outfile = 'None', returnoutput = 'True', timeout ="0,0 "."

  2013 05-28 T 06: 48:33Z esxupdate: vmware.runcommand: INFO: RunCommand called with: args = "[' / sbin/bootOption ', '-ro'] ', outfile = 'None', returnoutput = 'True', timeout ="0,0 "."

  2013-05 - 28 T 06: 48:33Z esxupdate: downloader: DEBUG: download http://172.29.137.20:9084/VUM/repository/hostupdate/CSCO/CSCO-VEM-5.1.0-metadata.zip to/tmp/tmprZ4JfI...

  2013 05-28 T 06: 48:33Z esxupdate: Metadata.pyc: INFO: unknown file vendor - index.xml in the metadata file

  2013-05 - 28 T 06: 48:33Z esxupdate: downloader: DEBUG: download http://172.29.137.20:9084/VUM/repository/hostupdate/VMW/VMW-ESXi-5.1.0-metadata.zip to/tmp/tmpytjFZI...

  2013 05-28 T 06: 48:33Z esxupdate: Metadata.pyc: INFO: unknown file vendor - index.xml in the metadata file

  2013 05-28 T 06: 48:33Z esxupdate: BootBankInstaller.pyc: INFO: value not recognized 'title = loading VMware ESXi' in boot.cfg

  2013 05-28 T 06: 48:33Z esxupdate: BootBankInstaller.pyc: INFO: /altbootbank/boot.cfg: bootstate goes from 0 to 3

  2013 05-28 T 06: 48:33Z esxupdate: vmware.runcommand: INFO: RunCommand called with: args = ' [' / usr/sbin/vsish ', '-e', '-p', 'cat', ' / hardware/bios/dmiInfo "]', outfile = 'None', returnoutput = 'True', timeout ="0.0 ".

  2013 05-28 T 06: 48:33Z esxupdate: esxupdate: INFO: everything is done!

  2013 05-28 T 06: 48:33Z esxupdate: esxupdate: DEBUG: < < <

  Yes run command now below.

  dosfsck - a w /vmfs/devices/disks/naa.600508b1001cfd08a4849f06984fd8a2:5