Problem with slate 10

Similar Questions

• Slate 7 voicetab: problem with Google Maps.

  Friends, long since I've updated my tab to Kitkat of JellyBean, I have a problem with Google maps. Whenever I use Google maps, it freezes the tab at some point and then I have to restart the tab. I updated the app several times and restored too. A tab reset but still having the same problem. What should I do to prevent it? At the moment I use 'maps', but I need to use Google maps. Please give notice to fix the problem.

  Hi there @Mono45
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff. I understand that your 7 Slate freezes on you when you try to run Google Maps. I'm happy to help you with this.

  I would recommend that you go well following linked page from above and in the section on the use of "find the solution that fits...." ' article 'an apps constantly reply on your HP Tablet.

  HP tablets - tablets hangs or freezes (Android KitKat, Jelly Bean)

  If it works for you, please mark this message as a solution.

• Problem with the volume of a new 7 Slate

  I'll put up a new slate of 7 and I have a problem with the sound.  I have all the sliders to the max value, but any video or app plays at a very low volume on the builtin speakers. A trial has been with FIOS app that allows me to stream TV shows. I have to hold the Tablet so the speakers are right next to my ear to make the same concersations on the show and it's barely...

  Am I missing something?

  How to make your slate with audio files simply by using the application to play music?  And have you tried to play a trailer of the game of Google?  Type right on a movie title and play the trailer by typing on the > arrow.

  What if you use headphones?

  Do you have ear system sounds?  Go to settings > sounds > Touch seems to be there where there is a checkbox on the right whether Touch sounds are on or off.

  Speakers of slate are not all that, but they do not produce a sound that is strong enough to listen to the TV shows and movies.  If you can not enough volume of them with other applications such as the music plays, there may be a hardware problem.

  A few other suggestions... try to restart it.  And back to headphones, try inserting a headphone plug in all the way and disconnected.

  _
  As a contributor of top of page on the Forums of media consumer, HP, HP gives me access to the slate of 7 free of charge so I can better answer questions on the Forum.

• Problems with HP Slate 7 voice tab

  Hello

  Since last 1 week I am facing a problem with my tab HP 7 voices, in which half of the screen is is blackened and vibrations can been seen on the screen.

  I bought this tablet Flipkart online August 17, 2014.

  Problem solved with the force update of the software

• Problem with the brightness of the display in my 655 - WINDOWS 7 HP laptop

  Hey there!

  I have a problem with my laptop HP 655. When I press the buttons to increase or decrease (exactly F2 and F3) they do not respond, these buttons do not work. I tried to install an UPDATE "HotKeys Support HP drivers" but they does not solve this problem. I installed all the drivers that were available for my laptop, but the same problem again. If anyone can fix it please ANSWER?

  ProductName: HP 655 Notebook PC

  ProductNumber: B6M65EA #ABD

  OS: Windows 7 Home Premium 64-bit Service Pack 1

  Thank you

  BujarA.

  P.S. This thread has been moved from Community Feedback & suggestion to the moderator of Forums HP laptop - HP ProBook, EliteBook, Compaq, slate/Tablet PC, Armada, LTE.

  Hi all

  This problem was solved by upgrading the BIOS released by HP two months ago.

  Thank you

  BujarA.

• Problems with e250 and SD memory card?

  Basic information about the player: e250, 2 gig, version 1, 01.02.24 has

  Basic information on the SD card: Sandisk micro SD, 2 GB

  I have my sansa for a year and a half, and I have never had any major problems with it so far.  Recently, I had to remove the songs to put on the new songs due to lack of memory, so I decided to buy a memory card for it.  Getting the empty memory card I inserted and recognized my drive and everything was fine.  The problems started when I put songs on the memory card.

  I put my player in MSC mode (as indicated in the manual), it is hooked to my computer (windows XP), and everything was fine.  I used windows media player to synchronize music on the memory card, then picked up my drive.  It is restarted, as he should, and I went to listen to music I would put right on and yet once again, it was fine.  Then, I wanted to listen to my music, and he flipped out on me and wouldn't let me play it.  After determining that it was not just this song, I removed the memory card and tried to play the old music, but he would always let me.  A small red box saying 'Wrong way' just kept popping up.

  I decided to start over, so I have deleted all of the player (via the computer) and then attempted to deliver music on.  I tried a few songs, sync and play the two media of windows and my computer says that the songs were on the player.  To get the player from the computer, I went to "songs" and saw that it was always empty.  I hung up, and the computer says that these songs are on the player.

  In a nutshell: my computer says it is synchronization of the songs to the player, but in reality, it isn't.  This has only started to happen after I had the memory card.

  If someone could help me, that would be great.  Thank you!

  I don't think that Windows Media Player will work in players v1 in MSC mode. It must be in MTP mode for WMP to recognize. In addition, with the cards in players v1, you HAVE to add/remove music in MSC mode only by drag and drop from your computer to the card (read as a drive in Windows Explorer). You have to treat the reader and the card as the "separate entities", even if physically they are connected. Once music is on the map, the player will fit perfectly on both songs.

  In what concerns the "bad tracks", you need to run CHKDSK to repair corrupt files, so you can remove them properly. Answer NO when it asks you if you want to save the files "bad strings" (or something like that). Check the 'sticky' & the FAQ at the top of the body for specific instructions on running CHKDSK. While you're at it, also check out & play on your player of formatting, as you should probably next to you to go to a clean slate.

  I believe that files (songs) put on using WMP in MTP mode can ONLY be played in this mode, and MSC placed files using drag ' drop can be read in THAT mode, which can be part of your problem. Probably best to start fresh and then don't forget you must manually put the songs on the map in MSC mode.

  Another oddity of SD cards (at least with players of v1) is that you must also manually add the 'album art' to the file containing the music if you want to see the album art that song. With WMP and MTP mode on the player, it will play the album art embedded in the ID3tag. It will not do this on the SD card . You can see specific instructions on how to do it here. There is also a video showing the procedure here.

  I hope this helps...

• Problem with laptop Pavilion dv6 wireless connection

  I have a problem with a computer laptop dv6-6b50ea Pavilion of customers. He has win7 64 bit installed and an Intel Centrino WirelessN1030 with blutooth wireless card.

  The user has used the laptop abroad with a 3G usb dongle with T-Mobile, but now wants to connect to his home wireless router.

  Initially only the two switched 3g options are visible in the network for the connection options. Therefore, I uninstalled all T-Mobile software for control of the key usb 3g and removed the dial two profiles, but the laptop wouldn't see any wireless connection.

  The orange light was on the f12 key and I couldn't get the wireless to work. Finally I found that even if it has been enabled in the HP connection manager, it has been disabled by Windows Mobility Center. I finally got the light turns white but still saw wireless networks while two other laptops could see the router in the same place.

  I took the computer laptop and tried it on my own wireless network, and although he saw them he said that they were very poor and wouldn't connect. I tried all the normal things like turning off the antivirus and windows firewall. I've updated the software of the driver from the HP website, but it still wouldn't connect.

  Finally, in desperation I disabled two virtual connections created by the driver. Finally he saw all my access points Wi - Fi including some a long way outside. I have is that it connects and thought that I had a crush, but restarting it would link is no longer. Since I brought the oldes driver I can find on the Intel site, updated twice by HP Support Assistant, who has updated the bios and installed the latest drivers intel, but it now not see any wireless network, or if it does sporadically and does not connect. Ethernet connection works fine.

  I've seen lots of messages on mobile phones of series dv6000 with Wi - Fi and an overheating issues etc. What is the same thing with the dv6 6b50ea?

  Any suggestion would be appreciated

  I had a very similar problem with Tablet Dell Latitude slate ST of my son.

  He has the card brand Dell Atheros wireless bluetooth/wireless combo. He had connection problems in W7, but I was finally able to make it work most of the time.

  I saw on the Dell forums, a lot of people complain about this card.

  I installed W8 on the Tablet and there is no pilot, so I resorted to an old driver w7 and I can't get the map to work most of the time.

  So, I ordered an Intel 6230 without wireless/bluetooth combo card for it and I'll see if it makes a difference.  Intel has W8 drivers for the card.

  I did the same thing you did... inserted a map of the network, D - Link DWA-125 USB into the USB port.  W8 recognized, installed the drivers and it connects without any problems at all.

  The difference between my situation and your is however that the 1030 Intel has no problems experienced with W7 link I know, that's why I suggested a factory reset to see if you can start from scratch and exclude a hardware malfunction.

  If the card still does not work, then of course we should be replaced by a card support listed in the service manual.  Unlike Dell, with all computers laptops HP, you can install one of the maps in the service manual and they must have the part number HP on them or they do not work.

  Kind regards

  Paul

• problems with, phone, 6, Bluetooth kit, Nissan, after update, for, Rios, 1.0.2

  After the update to ios 10.0.2 - trying to use bluetooth to call my vehicle, it says: "this article is not in your phone book." How can I solve this problem?

  Greetings, joybelino1!

  Thank you for joining the communities Support from Apple! I can't wait to see that you are having problems with your Bluetooth in your car! The good news is that Apple has a great article that will help you with measures to try to resolve the problem. Read this article to gethelp to connect your iPhone, iPad, or iPod touch with your car radio. Even though he talks about problems with the connection, it also has the steps for other questions you may have once connected.
  
  

  If you use Bluetooth

  1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
  2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
  3. Restart your iOS device.
  4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
  5. Update your iOS device.
  6. Install the updates to the firmware of your car radio.
  7. If you still not connect, contact Apple technical support.

  Have a great day!

• Anyone having problems with WiFi connectivity after upgrade to Sierra?

  I was wondering if anyone else knows issues with WiFi connectivity since the upgrade to Sierra 10.12? I have not had any problems with connectivity WiFi previously on El Capitan. Now I have regular randomly loose connectivity. My internet is cable and when it is connected I have a 100% connection. My details of iMac and I have used only 10% of my storage.

  

  No problem with my iphone 6.

  Hello AspDesigns,

  I understand that, since the upgrade to Mac OS Sierra, your Mac seems to have trouble staying connected to Wi - Fi. Fortunately the diagnosis built-in wireless can help identify the source of so much trouble.

  Search for Wi - Fi using your Mac problems

  See you soon!

• Problems with mail after switching to macOS Sierra

  Hey all

  After having recently upgraded to macOS Sierra, I am unable to read my mail.

  I get the following error every time I check on "Get Mail".

  There may be a problem with the mail server or the network. Check the account settings "*" or try again.

  The server returned the error: Mail could not connect to the server 'pop1.tribcsp.com' using SSL on the default ports. Verify that this server supports SSL and that your account settings are correct.

  What does this error message mean and how can I solve this problem.

  Thank you

  Hi Michael,

  I see your message that you get an error in the mail indicating that there is a problem with the mail server or the network.  To help get this problem resolved, I suggest that you follow the steps below:
  

  If mail refers to a problem with the mail server, or the network

  Mail will say that it is impossible to connect due to a problem with the mail server or the network. For example, the message may refer to a connection that has expired, or too many simultaneous connections:

  

  If you are connected to the Internet, but the connection has expired, your email provider might be affected by a discontinuance of service. Contact them or see their status Web page to ensure that their e-mail service is online. Examples of status pages:

  • iCloud mail status
  • Gmail status
  • Status of Yahoo mail
  • Status of the AOL mail
  • Status of Outlook e-mail

  If the message indicates the number of simultaneous connections, too many of your devices is check your e-mail account at the same time. Quit Mail on one or more of your other devices.

  If you are still unable to send or receive e-mails

  1. Make sure that you have installed latest version of the Mac software updates, especially if the problem occurred immediately after the installation of a previous update.
  2. In OS X El Capitan or later version, you can see a status icon and the short error message in the upper right of the Mail window, under the search box. The message may indicate 'Network offline' or 'Connection failed', for example. Click the message to see more details on the issue.
     
  3. Check your connection to the Mail connection doctor. It might be able to say more on the issue.

  If you cannot send or receive e-mail on your Mac.

  Take care.

• iMac 27 "mid-2011 - Intermittent problem with CPU fan running at full speed and sleep mode.

  Hello!

  My iMac 27 "has an intermittent problem with the CPU fan runs at full speed. Sometimes it happens at the time when I start it, sometimes only in my session, and sometimes only after a certain time. So does seem to be a problem of "heating".

  Second issue is with the mode 'sleep'. It may occur also at any time, at the start of the iMac, session, or after a certain time. But once he starts to go in mode 'sleep', when I wake up, it goes right back in mode after a few seconds and that it will continue indefinitely until I restart the computer.

  What could be?

  Please help me!

  4ntoine

  Here is my model of iMac:

  iMac 27 "mid-2011 model 12.2

  Intel Core i7 3.4 GHz

  AMD Radeon HD 6970M 1024 MB

  OS X El Capitan 10.11.6
  SMC 1.72f2

  Boot ROM IM121.0047.B23

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• problem with playing the clash of clans

  I'm having some problems while playing the clash of clans on my 2 mini ipad screen does not seem to meet sometimes as if it was some sort of delay so I have to tap several times in order to use a filter or throw the troops on the battlefield.

  Hi Trinitygr,

  Thanks for posting in the Community Support from Apple! I understand that you are having problems with your iPad screen while playing a game. I like to play games on my iPad and I don't see how this could be a nuisance. I'm happy to offer assistance.

  Are you only had this problem when using the app clash of Clans, or does it happen in all applications? I recommend to start by following the steps described in this article:
  If an application you have installed unexpectedly closes, unresponsive, or does not open

  Take care!

• I'm having problems with an outdated Apple ID

  I have problems with updating Apps etc in my Apple account because he always asked an obsolete in sign.  How can I change this?

  Hello

  Go down to itunes apple ID Delete page homepage all ID and then add it back back.

  See you soon

  Brian

• Anyone having problems with the new iPhone LTE connection 7 on Verizon?

  I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

  (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

  (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

• Problem with some fonts of symbols after the installation of the Sierra

  Hello

  I have recently upgraded the OS on my iMac late 2012 for Sierra, since doing so, I noticed a problem with several fonts.

  All symbolic symbols Apple to Wingdings fonts not correctly displayed in the font book. Apple symbols looks like a standard wheelbase of san, and other symbolic fonts just show as question marks '?' where the images should be.

  In text editing, that I can't even see the symbolic fonts like Zapf Dingbats and Wingdings in the selector. However, they all work well in Adobe Illustrator (CS5) and Microsoft Word 2011. Apple symbols still looks like a standard font.

  I already tried the following:

  1. check the fonts in font book

  2 fix the duplicates in the font book

  3. using the "Restore Standard fonts" option in the font book

  4 deleting a file in the folder Preferences plist Fonts

  5 deleted the cache of police and the database

  I'm out of ideas. Has anyone else had the same problem found a fix?

  Kind regards

  Greville

  I'm just to add that I used the recovery partition to do a clean install of Sierra on a hard drive external and then booted into it to see if it had the same problem.

  And he does. Wingdings and other photo fonts appear as '?' in boxes where the letters must be in the font book.

  So this seems like a problem with the way Sierra displays these fonts, not with the font files themselves.