Problem with Sony Xperia S Bluetooth Driver

Similar Questions

• Problem with my Atheros Wifi/Bluetooth Combo card to reboot. in windows 8 pro 64-bit

  Hello I have the following problem with my free wireless/Bluetooth combo card.
  I have personally installed a new combo entered only the material of a third party wireless card
  online market. The device was immediately discovered Windows 8 and installed the drivers that he thinks are best for the device. Both wireless and Bluetooth work as expected and the problem happens when I put the machine power off or reboot the system, Hibernate does not affect the operation of the device. When the system is rebooted / turned from cold start. Windows 8 displays a red X on the wireless icon and Bluetooth does not work. troubleshooting tool and Device Manager act as the device is installed correctly. To resolve this issue, uninstall Bluetooth and wireless both drivers leave system scan for changes, it then reinstalls the device and the system works as expected for both Bluetooth and wireless. I'm looking to solve this problem, I didn't notice any problem yet in the operating system other than windows 8.
   
  Details of important system information:
  Windows 8 Professional. x64bit
  Microsoft Windows [Version 6.2.9200]
   
  Card added to my Asus G74SX
  Operating name: Atheros
  Model: AR5B195 (WiFi: AR5B195) (Bluetooth: AR3011)
   
  The Device Manager shows the follow-up:
   
  Bluetooth
  General tab:
  Qualcomm-Atheros AR3011 Bluetooth 3.0
  Location: Port_ #0001.Hub_ #0003
  Advanced tab
  Manufacturer ID: 69
  HCI LMP 5.39321 a 5.39321 version
  Driver tab
  Driver provider: Qualcomm Atheros Communications
  Driver date: 08/06/2012
  Driver version: 1.0.4.0
  Digital signer: Microsoft Windows Hardware Compatibility Publisher
   
  Network cards:
  General tab
  Qualcomm-Atheros AR9002WB-1NG
  Geographical area: PCI Slot 1 (bus PCI 3, device 0, function 0)
  Driver tab
  Driver provider: Microsoft
  Driver date: 03/07/2012
  Driver version: 3.0.0.130
  Digital signer: Microsoft Windows
  Driver file details:
  C:\Windows\System32\DRIVERS\athrx.sys
  Provider: Qualcomm, Atheros Communications, Inc.
  Version of the file 3.0.0.128
  Digital signer: Microsoft Windows
  C:\Windows\system32\drivers\vwifibus.sys
  Provider of: Microsoft Corporation
  File version: 6.2.9200.16384 (win8_rtm.120725 - 1247)
  Digital signer: Microsoft Windows
   
  Error Viewer:
  Task category: (16)
  The description for event ID 15300 source WPDMTPDriver is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
  PSG WPD driver

  0 x 80070002
   
  Source: BTHUSB
  Event ID: 17

  The local Bluetooth adapter has failed in an indefinite manner and will not be used. The driver has been unloaded.

  I guess the problem with my card is out dated drivers for my wireless card.

  (SOLVED)

  I at first sight, that this would not help, as it does not address the question, or the other.

  1st stage however was a yellow triangle! Sign up for troubleshooting. reboot and I checked for internet/bluetooth. I got my net upward and did two step, windows told me, he had the best drivers for the device. I went to the menu where you select wireless cards then. and it occurred to me, for some reason my wireless card had been cut, and troubleshooting of windows didn't catch it. My G74SX, so now like with most laptops, has a Wireless on and off function, I pressed the button for this and then on my bluetooth and windows wireless. I then tested the function of these two, and did a reboot and shutdown, test market and the system works perfectly. Now, I wonder if that was the problem at the beginning.
  Thank you.

• Problem with uninstalling the Toshiba Bluetooth Stack for Windows

  Guys, I have a problem with uninstalling the Toshiba Bluetooth Stack for Windows v4.00.22 on my laptop Windows XP SP2. Whenever I choose to remove the "battery Bluetooth for Windows by Toshiba" (or "Bluetooth HID Switch Service") the installation program starts to prepare, but crashes after a few minutes - the only way to continue is to turn off the laptop.

  The same thing happens when I try to update the stack to the latest version - the installer says that the old battery has to be removed first and crashes after trying to remove it. So is it possible to remove it by hand? I really don't want to reinstall Windows!

  I don't have a copy of the original Software v4.00.22 to recharge so if you have a copy or know where I can get a copy I would gratefully

  Thanks in advance.

  I would try to delete the folder: "C:\Program Files Toshiba Stack.
  Registry settings will remain, but should be repaired after a new installation of the Bluetooth stack.

• sbh52 dual multipoint problem with Sony Z3

  I use Sony Xperia Z3 double D6633 and I use sbh52 since February, but I can't at all mutlipoint, even I update my phone to 5.1 lolipop, multipoint does not appear and sound with gray and cannot not selected

  Is this Sony Xperia Z3 and Sony Xperia Z3 double that you use and that you want to connect to SBH52?

  Can you reset the headset and start from the beginning? On your headset, press the menu key > go to settings (icon tools) > Navigate to reset option (an icon with an arrow around it) > confirm the reset.

  The headset will now restart and display the icon of Bluetooth connection on its screen. When you see this icon on the SBH52 Bluetooth, go to the Bluetooth menu in your Z3 or double Z3 > SBH52 Tap and it will connect.

  Turn off your SBH52 and when it is off, press and hold ON / OFF for 5 seconds and the Bluetooth icon will appear again. When you see the Bluetooth icon, release the ON / OFF button, otherwise, it will change to the reset option. Now you can go to the Bluetooth menu on your next device > here you should find SBH52 > tap and it will connect.

  When connected to two phones, you can press the button of your headset menu > settings > multipoint option and singlepoint appeared now.

  More information:
  http://support.sonymobile.com/global-en/sbh52/Userguide/multipoint-functionality/

• Satellite Pro L10 problem with Ports COM/Hyperterminal & Bluetooth

  Hello
  I have the following problems with the above machine:

  (1) I have attached an external series COM port to the machine. However, I can not connect to the COM Port using Hyperterminal.
  (2) I installed a Bluetooth USB adapter, but I can't view the protocol configuration.

  Each of the above works perfectly with another laptop that doesn't have a Bluetooth or even a network card.

  Everyone has experienced similar problems. I use WinXP SP2.

  Thank you

  MC

  Hello

  1, in which is the external COM port connected? Is detected in a straight path in Device Manager? What is the error msg to Hyperterminal?
  When connected via PCMCIA, try to change the settings for PCMCIA slot in the BIOS!

  2, try to reinstall the Toshiba Bluetooth stack! There may be some problems. The MS Bluetooth stack does not work properly with the Toshiba devices and one of the earlier Toshiba Bluetooth stack is not signed by Windows XP Service Pack 2!

  Hans Bye

• problem with the SM Bus controller driver

  Dear Sir...

  My machine is Hp Pavilion 1150ee g6

  product no.: LX309EA #ABV

  I have windows 7 professional service pack 1

  I am from Egypt

  I'have a problem the appliance cannot read usb flash memory and after I cheked my device manager, I found a problem with the driver for Sm Bus controller (kindlly see attached picture)

  

  so I tried to download the driver from the site sp52791

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = ar & CC = emea_middle_east & DLC = ar & sw_lang...

  But when I installed it I found a wrong message

  kindly I need your support to solve this problem

  Thank you very much for your cooperation

  Nader

  Hello:

  Try the driver directly from Intel...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & ProdId = 816 & DwnldID = 20775 & Keyword = Chipset + Installation + Utility & lang = eng

• Problem with Half Life 2 display driver

  Please can someone help me?
  I just installed the game (Half Life 2)
  whenever I play the game everything is fine until I have quit the game, my laptop fell down and restarts.
  the error report I send said that there is a problem with my display driver.
  before I start the game, I get a message that says that my display driver is outdated and that I could get in trouble, because my computer is a laptop, (Nvidia) do not carry the Toshiba drivers.
  I've been on the Toshiba site and they have no display driver newer than the one I use now.
  Please could someone suggest something I could try.
  and Toshiba will bring a driver updated in the near future? This really seems a pity that the game seems to work verywell accept for this problem that exists.
  My laptop is a Toshiba Satellite P10 with a Nvidia G-FORCE FX GO5200 card inside.
  Your M Lovett.

  I have the same card and I get the same message, however without crashing.

  you have installed all the updates/fixes you can to ACE this may solve the problem.

  What about drivers who are the cause of the accident, one of my friends had a lot of problems with regularize them and crashing and it was running the game on a custom platform so maybe it's not that the real fault.

  [Edited by: admin 30 May 05 07:13]

• Problem with vaio pro and bluetooth mouse.

  My new Sony Vaio Pro has been disconnected my bluetooth MS sculpt mouse.

  I had to re - connect or even re-install the mouse. Painful!

  It turns out that bluetooth devices is powered via a USB controller

  On the Generic USB controller, under properties, there is a check box selected that allows the computer to "Allow" computer to turn off this device to save power

  I unchecked which and now my mouse works fine.

  Thanks for that. I couldn't work at all with the Pro my bluetooth mouse. Now maybe I can - if I can only find where I put the mouse...

• HP Envy 17-2100ed: problem with the installation of a driver on my laptop

  Dear readers,

  I have some time for problems with the installation of the drivers on the HP site. Whenever I chose a driver, such as for the Cyberlink Youcam software, the download process will be blocked at 28.9 MB, a total of 154 MB. I also tried to install the software for my HP printer, but once the same question.

  Can someone help me? Thanks in advance!

  Kind regards

  Amir

  Hello @Amirkalloe,

  Thank you for visiting the HP Forums! The Forums are a great place where you can find solutions for your problems, with the help of the community!

  I came across your post about the problem of driver and he wanted to help!

  Problems installing drivers, or by downloading the drivers?  If you have problems to install the drivers, you can use the tool on the following site:

  Open the Windows Update troubleshooting tool

  Let me know how it goes.  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• problem with the memory or hard drive

  I have a problem with my hardware. Whenever I'm playing a video on youtube or another site, that the screen on my laptop becomes blurred and the keys and the mouse becomes inadmissible.  A few seconds later, the screen goes black but you can still hear the audio for a few seconds then the computer. I have a beep and the computer turns off. And I end up having to shut down the computer and re-start all over again.  Well today the blue poped to the top of the screen and said that I had a problem with one of my drives. He said that one of the disks has been blocked in perptial movement. And this problem only happens when I'm watching a video on my laptop. Everything is fine until I have play a video.

  Hello

  1. This occurs when you read online videos?

  I suggest you to follow these steps and check if that helps:

  Method 1:

  Try to update the latest drivers for the graphics card and check if it helps:

  http://support.Microsoft.com/kb/283658

  Method 2:

  Try running this fixit and see if it helps:

  http://support.Microsoft.com/mats/video_freezes_or_crashes/en-us

  For more information, see this link:

  http://support.Microsoft.com/kb/2532294

  It will be useful.

• Pavilion 15-n234sl: problem with the installation of the driver WIFI RTL8188EE

  Hello world.

  I encounter some problem with my wireless card since the new driver is available via windows update.

  The installation seems to be ok, but after that the card no longer works.

  The key of the keyboard wifi light. lit red guard if it is set to the aero mode.

  The card works fine in rolling back to a previous system configuration, it goes back to work, until the new driver is installed again.

  Any who have experienced the same problem or does anyone have a solution?

  Can someone tell me the other compatible wifi cards in case of substitution?

  Thank you very much and sorry if my English is not perfect!

  Ste

  Hello:

  Please read my recommendation about what to do on the link below...

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/Realtek-RTL8723BE-update-fails-cuts-off-WiFi/m-p/5275224#M102368

• problems with Windows 7 mapping network drive

  I bought a new computer to work today. It's a HP Pavilion Slimline s5220f. Works on Windows 7. All our other computers working under Windows XP. We have an external hard drive that acts as a file shared for the organization. (We are a small non-profit and rather rudimentary.)

  I have problems to connect to our "shared drive" - the reader 's' - where all our shared work files are kept. I have connected a hundred times on other computers, but can't seem to get it right with Windows 7... What I do usually it is right click on the 'my computer' icon and click «map drive network...» "Then I put in '\\filecabinet\shared' and he asks a log on and password... I checked the log on and password - everything is correct. When I enter the log and password, I get a message saying that "the specified network password is not correct".

  I spoke with two different people at HP. Nothing has worked. I really need access to these shared files in order to work. Help me!!

  After authentication on your Windows 7 computer, is there an indication of a field in the dialog box? (If not in a domain, your computer name is represented by a colon after it.) Well, if so, your computer tries to authenticate with domainname\username instead of only User_Name. It gave me trouble when authenticating to a SAMBA file server. Try plugging a "\User_Name". Your computer name should disappear when you type the backslash.
  Warning: this was tested on a Windows 7 machine company. This trick should also apply to Win 7 pro. I don't know about other editions if.

• Equium is affected by the problem with Sony batteries?

  Does anyone know if Toshiba Equium is affected by the problems of Sony batteries? It is subject to recall, and if so what is the process?

  Thank you very much.

  Hello

  I also read about voluntary exchange battery Toshiba programs and I found this information site:
  HTTP://EU.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/GENERIC_CONTENT.JSP?SERVICE=EU&ID=0610_BATTERY_EXC HANGE_LANDING_PAGE

  According to this page only some portable computers manufactured between March and May 2006 are affected.
  I also found a useful FAQ on this topic:
  http://support.toshiba-tro.de/KB0/TSB6901KE000HR01.htm

  Hope I could bring light on this case.
  Good bye

• problem with my computer laptop hardware/driver.

  I have a laptop lenovo z570 to hv with win7... from AFTR, on the desktop, the last icon is selected automatically... even whn, I opened my man or recycled bin that opens the last shortcut... BT when I press any key in keybrd the problem disappears... sometimes moreovr to start the 'starting windows' screen freezes... in the same way whn I press a key to start the windows... I have lots of hv formatted my computer laptop aftr the prob... bios update... BT no result... what to do? pls help.is it any hardware problem or any other thing?

  Hi Anurag,

  Thank you for keeping us posted.

  Could you please check with support from Lenovo because it seems to be a problem with the hardware.   I suggest that you post your question in the support forum for Lenovo.

  http://forums.Lenovo.com/

  Keep us updated with the status of the issue.

• Problem with update Xperia Z2 1279-0989_R3A ROM 'Commercial and journalists '.

  Hello

  Maybe it's not the problem of large scale, but I think, for some people with this customization, it's very annoying.

  Version of the customization of my Xperia Z2 is 1279-0989_R3A and I still 4.4.2 Android. For some time, I should have Android 4.4.4 (and Feb 5.0!), but in my OTA, there is no update.

  Yes, I know I can root this phone, but I don't think, if I bought the original phone, I had to do to have a "normal" version of Android.

  Sony, do you have any plans to update my phone, or I should root it?

  I checked the number IMEI you have registered with us and should not have this customization. It must be marked for T-Mobile, Poland (1281-1403). It seems that someone has changed the firmware of your phone at a time in a firmware not intended for consumers.

  I recommend you to contact a service point for good firmware installed (1281-1403). This has been 4.4.4 Android.