Equium-A100-147 - broken sound and video

Similar Questions

• Equium A100-147: record now and Roxio can't find Recorder

  Equium A100-147 with Sonic, 'Save now' 7 worm, using gives 'NO recorder' and can not find the drive. If no records. I checked the box 'Save' in the properties for the drive but no joy. Also I tried Roxio software but it was also unable to find the drive.

  All of the suggestions.
  See you soon.

  Please check in Device Manager if the cd/dvd drive is correctly recognized.
  Additional if you can find the drive in the Device Manager, you could try to remove it and restart the laptop.
  After restarting the laptop should recognize the device again.
  Then you should check the functionality of the drive.

  I studied a bit on the site of Microsoft for similar problems and found a few interesting sites:
  http://support.Microsoft.com/kb/320553
  http://support.Microsoft.com/kb/314060/

  In my opinion, some registry entries are corrupted.

• Equium A100-147 - system slow and sounds distorted

  Hi, need help.

  I have the satellite A100-147, been works well for a couple of the year, but in recent weeks a land virtually at a standstill, takes between 5-10 minutes at startup and when starting and once started the sound is as if memory is slow (like distorted) even at sign in when windows tune time.
  Laptop 2.5 GB memory must so much and 18 GB free s a do not falter. Under XP SP2 MCE. Alarm zone running, thinking that this could be the problem are now moved to AVG, but still the same.

  CPU used when the system idle, i.e. just started with no application running varies bbetween 25-55%

  Any ideas on what it could be before reconstruction

  Thank you
  Gaillard

  > Do you know were the disks may need to return the unit to the factory settings?
  You can try to get it service provider authorized in your country.
  As far as I know it can be problematic to order the CD/DVD of recovery for older models of laptops but maybe ASP can help you about this.

  Alternatively, you can install the OS by using the facilities of Microsoft CD. All the necessary drivers, tools and utilities can be downloaded from the Toshiba support under http://eu.computers.toshiba-europe.com page

• Equium A100 - 147 Virtual Sound reinstall problem

  I read a few posts about the same problem I have, but with no definitive answer. I have the satellite A100-147 with Windows XP Media Center. I downloaded a few files updated on the Toshiba site (all for my model), including:

  acsil-xpmce-100008-en
  Assist-xpmce-10300-en
  confree-xpmce-59007ab-en
  csutil-xpmce-7211006
  Tonalite-xpmce-3221506-en
  display-xpmce-142004543
  fever disease-xpmce-2004
  Pcdt-xpmce-321u-en
  pwrsav-xpmce-70307i-en
  sdform-xpmce-2200-en
  SD-secure-xpmce-104-en
  Sound-xpmce-51005253
  Toupad-xpmce - 10001st - en

  and then: tvs-xpmce-10312-en (latest driver Virtual Sound for the A100-147)

  I uninstalled the old version of the virtual sound driver before attempting to install a new one. But as I've seen elsewhere, I get the message:

  "Toshiba Virtual Sound can't stand your computer."

  I spent all afternoon looking up and trying to find ways to solve this problem. I've since updated my BIOS (bios-550win). Not a thing I try it will work. I even deleted the references to his virtual in the registry where there was no ongoing conflict. It made no difference if.

  Could someone Toshiba please explain to me why I am told that I can not install which worked perfectly until this morning, before these updates, which are all intended for my laptop model? This is ridiculous. My apologies for my tone, but have lost hours on it, I'm extremely frustrated and you want just like it was back in my laptop (and before you ask, Yes, I tried a system restore, but that does not work either).

  Thank you

  Mac

  Hello
  I have the same problem. Please check the post: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=21761
  I have received no concrete response.
  :(

• Equium A100-147: can not play videos from the site with WMP

  When I try to play videos from a Web site, I get an error message. "Windows Media Player received. Error message Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. »
  ERROR CODE DOOD11D2

  My computer settings are set out at the time of purchase. Is this normal?

  Hello

  I think the error messages says that everything you need to know:
  You can not read the file because:

  -Is the file may be in use
  -you won't have access to the computer where the file is stored
  -your proxy settings are may not be not correct

  The proxy settings must be defined on use web browser proxy settings, you can find the setting when you open the WMP and tab marks the Protocol HTTP and meadows configure network.

• Equium A100-147: Impossible to get Bluetooth to work

  I bought an Equium A100-147 last week and noted in the manual it should have Bluetooth capabilities. However, I can't get this to work. I looked for my phone, and it does not pick up the computer as a bluetooth device. In the help files, it says I can set it up in the bluetooth settings in the Control Panel, but there is nothing in there. I tried to install the battery Bluetooth Toshiba, but it keeps asking me to install the bluetooth device.

  This computer actually has bluetooth abilities or not? If so, how can I get this to work?

  See you soon

  Hello

  Each unit with BT has BT label in the lower corner. Something like this http://support.toshiba-tro.de/KB0/FAQ35007I001WR01.htm

  If you do not find it the BT is certainly not available.

• Equium A100-147 - sound devices do not work correctly

  I've owned an Equium A100-147 for only less than a year.

  The problem I have is that if I put pressure on the area around the left speaker (where is the VGA port) there is a substantial "cracking" / rattling noise. The right does not exhibit this problem.

  The other day with a same case design (model Satellite A), I got another PC Toshiba laptop and it seems to have a slightly stiffer construction quality.

  Is it worth getting it checked under warranty while I still have the warranty? Or am I just too picky?

  See you soon

  Interestingly enough, why you support on the area around the speakers. As far as I know the speakers are placed between the keyboard and display and keyboard there is no pressure to the speakers. Very strange method to test the functionality of the laptop! ;)

  In any case, you should contact the service because the speaker should be placed and fixed correctly.

• Equium A100-147-glitch-pop-crack if the sound is muted

  Hello.

  I have an Equium A100-147 with Vista home Premium SP1 and 1 GB of RAM.

  Recently I get a glitch-pop-crack from time to time even if the audio output is cut.
  Have no idea what could be the cause?
  I'm more or less certain that everything is up-to-date.

  Thanks in advance.

  I never heard a question also and now I can t say what's the reason for this. :(

  You have the same problem on external speakers?
  What operating system do you use?

  Perhaps you need to update the audio driver you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck

• Equium A100-147 - Native resolution on the external LCD display does not work

  Hello

  My Equium A100-147 has 1 VGA and 1 S-Video output, so I use the VGA output on an external LCD monitor with a native resolution of 1680x1050@60hz, but integrated graphics Intel 945 card doesn t give me the correct resolution to choose for this monitor, the closest is 1600 x 1200 and some weird widescreen resolutions other that make my monitor see the scaling an ugly picture.

  So I tested another external monitor with a native resolution of 1920 x 1200 resolution closest gave me Intel drivers is 1920 x 1080, even the installation of two drivers of monitors, remove and reinstall the driver and same formatting the machine and reinstall everything from scratch gave no different results.

  I have another laptop MSI Wind with the same graphic card built in and the same version of the pilot, and the laptop detects both the monitor and the good resolutions for them, this isn't a problem of Monitor driver.

  Seems to me that is a problem with the S-video output, which makes this mess, but there is no way to disable it in the BIOS or any other place in Device Manager I still seem.

  Can someone give me some advice for what can do?
  Thank you!

  Hello

  You cannot choose the preferred resolution because the graphics chip does not support this external resolution or the installed graphics driver is not contained in this resolution. The two cases are possible.

  If you want to know if your graphic chip supports this resolution and then take a look at the user manual and check it.

  If the chip of the graphics card would support this resolution and you will not be able to choose, then that would mean that the graphics driver does not support this resolution.

  But first he must find out what external resolutions are supported by the GPU.

• Equium A100-147: large screen display resolution is not available?

  Hi, I recently bought a laptop A100-147 - accepted a view model that I had trouble getting one of them. On the beautiful screen, the screen resolution is 1024 x 768 - that it and 640 x 480 and 800 x 600 are available. This sounds awfully stretched.

  Is this correct? Or do I have to create a different graphics driver that allows me to select a screen resolution?

  Thank you.

  Hello

  According to the description of the Equium A100-147 comes with color Wide XGA TFT 15.4 TruBrite display ". The standard resolution of this monitor is 1280 x 800. If you dot have this one please install graphic driver. You can find it on the download page of Toshiba under http://eu.computers.toshiba-europe.com support & downloads.

  I can't imagine that it happens after the first start. You have preinstalled your own operating system?

• Equium A100-147 - bought the bad battery

  My Equium A100-147 is about 3 years now and won't hold its charge longer than 10 minutes so I bought a used one on eBay for a broken machine.
  The battery itself is quite new in terms of use-life, his laptop computer that failed!

  It's the wrong kind.

  Been declared as Toshiba equium laptop battery but it is of course many variants.
  My battery model number is: PA3399U-2BRS 10.8V 4000mAh

  EBay battery model number is: PA3384U-1BRS 14.8V 4300mAh and nealy twice the size! (Could someone tell me models that suit so I can sell it on)

  My mistake!

  Pete has soon.

  Hi Pete

  Before you wait here put the part number in Google and you will find on what mobile phone models can use this type of battery.

• Equium A100-147 would not start

  Equium A100-147 would not start. Only the lights next to the CapsLock F10 F11 keys are on. When the switch is pushed the lights disappear back only after about 15 seconds.

  Help, please.

  Disconnect the power adapter and remove the battery. After doing this press the power for 30 seconds. Wait a few moments, connect the power adapter only and try to start your laptop.

  What happens when you do this?

• Equium A100-147: I get an error during the recovery procedure

  Hi again,

  I had trouble with my equium a100-147.
  I tried a restore, but the disc is scratched so I phoned in ESL and it snet me a new recovery image.

  I tried the new recovery disk and am now errors when I boot the disk.

  error is

  "internal error crc file: \WINDOWS\$NtUninstallKB895200$\msdtctm.dl.

  any suggestions are welcome. get really annoyed with my machine as my warranty expired only one month

  Thank you

  Hmm... I studied a bit and it looks a bit like a malfunction of the partition.
  It would be desirable to boot from the original CD of Microsoft XP and to start the repair console.
  Then you could try these various commands which help to repair the boot manager, repair errors, locate bad sectors and recover readable information.

  -fixboot
  -fixmbr
  -bootcfg /rebuild
  -chkdsk /r

  If this does not help, you should erase the entire partitions and must format the HARD drive in NTFS file system. Then access the BIOS and set it to the default value.
  Once this procedure tries to start again on the new recovery CD!

  Good bye

• Equium A100-147: need a new disc of restoration as mine has been a scratch

  Having a little trouble with my Equium a100-147.
  Tried a recovery from disk and I got up to 75% and recovery stopped.
  Taken to a computer shop to get it fixed and they couldn't do anything because they do not have a disc of recovery in good condition.

  Is there anywhere I can download the image to a different computer, put it on a dvd and restart from that one?

  Contact the ASP in your country and order the necessary CD

  Here you can find near the ASP in your country
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

• Equium A100-147 replacement hard drive

  Hello

  I got a toshiba Equium A100-147 by a friend. The only problem is that it comes without a hard drive, because he still destroyed his old hdd to protect its personal and professional data.

  I saw in a local computer store a disk sata hard very good price for only? Â £38 it's a 160 GB w Digital Scorpio 5400 RPM 8 MB Cache S - ATA HDD laptop someone knows if it will work or this laptop does it work-specific hdd?

  Looking forward to any help you guys can give

  Hello

  Of course you need a compatible HARD drive.
  There are two different standards of HARD drive. SATA and IDE

  You need the HARD drive with the SATA interface. I think the original HARD drive was 100 GB.
  So a 120 GB and maybe a 160 GB SATA HDD should also be compatible.

  As far as I know the HARD drive slot was placed at the bottom of the unit and a screw secures the plastic cover.
  It of really not difficult to replace the HARD drive and I think that the details could be found in the user manual.

  Good bye