Problem with starting Internet

Whenever I log on the Internet, at the same place appears. It's an address that earlier, I visited. I have to press the button ok twice.

Then I can write another address above to access another site.
How to get back to normal?
I used to have Google in the "start page" on the internet.
Susanne

Hello

http://Windows.Microsoft.com/en-AU/Windows-Vista/change-your-Internet-Explorer-home-page

Change your Internet Explorer home page

  1. Open Internet Explorer by clicking on the button start , and then click Internet Explorer.

  2. Go to the Web page that you want to set as homepage.

  3. Click the arrow to the right of the home button , then click on add / change of Home Page.

  4. In the dialog box add / change Home Page, do one of the following:

    • To make the current Web page of your only home page, click on use this webpage as your only home page.

    • To start a home page tab set or to add the current webpage to your set of home page tabs, click Add this page to your home page tabs.

    • To replace your existing home page or tab of the home page set with the webpages you currently have open, click on use the current tab set as your home page. This option is not available if you have more than one tab open in Internet Explorer.

  5. Click Yes to save your changes.

or open IE - go to the page you want to your home - then this favorite - web site page click on tools in the Menu bar - Internet Options - current use - apply - OK

Tags: Windows

Similar Questions

  • When I start my computer I get the message "Windows Live Mesh, there might be a problem with your internet connection make sure computer connection and try again, I run Windows Vista"

    I run Windows Vista.   Recently on commissioning the first thing that appears on my screen is a 'Windows Live Mesh' message, "there could be a problem with your internet connection.

    connection.   Ensure that the computer is connected to the internet and try again".

    My computer is connected to the internet, and it works very well.   How can I get rid of this annoying message.

    I tried all means to find this file on my computer, but it does not appear to be

    Can you help me please

    Mike Gray

    Hello


    Were there any changes (hardware or software) to the computer before the show?

    Perform the check and the boot if the problem persists.

    To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    Note: Follow step 7 to reset the computer to start as usual after the boot process.

    Hope that helps.
  • Problems with the internet connection, Aspire V15 - V3 - 575G

    Hi, I bought a new laptop and have problems with the internet connection without having to install other programs.

    The problems are the following:

    • I use an ethernet cable to connect and just after passing on the laptop, there is no Internet connection at all. I have to restart the router to do.
    • When downloading or uploading brokes down at intervals of 30 seconds - 1 minute. It is not always the same. Sometimes it works 3 minutes, but it is not enough.

    He has Win10... With my old laptop with Win7, I had no such problems. I do not change ISP.

    I don't know what to do to fix it. I have not tried to uninstall Acer applications yet. Have you experienced something similar?

    Thank you very much for the reply.

    Plese try this:

    device, right-click on your network card Realtek Manager choose uninstall and tick to uninstall the software if requested, restart, and then try again to install the downloaded driver.

  • Unable to connect to the internet using my cable broadband from sky. He said that there is a problem with your internet connection.

    original title: connection to the sky

    Hi I have a dell Inspiron mini and when I put my sky broadband cable said inside connected to the internet, but when I opened a page it says there is a problem with your internet or something.i have also the wireless network connection, but I think one of my kids messed with the parameter as , I can't use the wireless setting now.so if anyone has any answers I would be grateful.

    Hi Kerry,

    I would recommend contacting Sky support with their internet service:
    One thing, you can try on your own is following the instructions in this Microsoft article and running the Fixit tool:
    I hope this helps.
  • I installed AVG 9.0 and now I get the following MSN Explorer pop up of message.__You are unable to connect to your e-mail server. There may be a problem with your Internet connection, or a problem with the mail server. Pleas try again.

    I installed AVG 9.0 and now I get the MSN Explorer pop next message.
    You can not connect to your mail server. There may be a problem with your Internet connection, or a problem with the mail server. Pleas try again.

    Sure.  Analysis of your e-mail anti-virus program:

    • Can slow to receive and send messages, or even fail.
    • Can damage files of storage for messages that you've already sent and received, making it inaccessible messages.
    • Is not necessary.  If you receive an infected attachment and try to open it, the protective device in real time of your antivirus program will block the infection.

    Here are a few web pages accurately:

    Why you don't need your anti-virus program to scan your e-mail
    The other threat email: the Corruption of files in Outlook Express
    Why some antivirus software can change the settings in e-mail programs
    Email scanning - advantages and disadvantages

  • After the last updates of windows have problems with start up and now drivers

    Hello

    After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

    May 14, last night I had several (automatically) downloaded windows update

    Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

    Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

    Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

    Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

    Thank you

    Hi Jane,

    You have a disk to install Windows 7 with you?

    I suggest you to check the event viewer for error details report.

    Open event viewer.

    http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  • Problems with our internet connection

    Hello, I have a all in one HP touchsmart PC (running windows 7), and he has problems with our internet connection. I dot know if it is in the right section, but this seems to be the best in the class.

    The rest of my house to connect to our router fine (iphone, iPad, computer laptop) except this PC. I CAN connect to the router, but 5 minutes or later, he has a X red on the connection and said "the settings saved on this computer do not match the requirements for the network" I looked everywhere online for this, but it remains stubbornly disconnects every time.

    I tried to delete the network and try again, but he still has a red X and the message more each time. I tried to connect and Ethernet cable, still no luck. I am very desperate to solve this problem, because it's what I use for games. Can someone help me please? It would mean the world to me if someone could help me solve this problem.

    If you don't mind keeping this Ethernet cable connected, you might have a solid connection if you come to turn off the wifi connection completely and rely only on the cable.

    Here's how:

    1. Press on + R to display the run box, type ncpa.cpl , and then press OK.
    2. Right click on the wireless network connection and choose disable.

    That's all.  You can always reactivate if you wish.

  • Problem with receiving Internet in Inspiron 3847?

    My computer is a Dell Inspiron 3847, and I noticed internet connect seems to disconnect sometimes. The only way to fix this is by unplugging completely reconnect. This isn't a problem with my internet because it only happened on my laptop. It usually happens when downloading games. I could do to solve this problem?

    Hello

    Please try in safe mode with network.

    Update BIOS and drivers. Clear the boxes for power management.

    Concerning

  • Problem with update Internet Explore 80242006-Vista error

    Hello world!!

    I had problems with the update and that run internet explore. It's been a while since I can't watch videos on it is to say, even if I've never had such problems with any other browser. And now I can't update my system and more specifically the internet Explorer. I get an error message whenever I have try and all microsoft proposed solutions were not useful.

    The error message is 80242006 and is defined as an unknown error.

    Any ideas? Something might work! Help, please!

    my [NOD32] subscription had expired two weeks before I desided to install MSE [and] my panda subscription had expired [NOD32 has been installed]

    See...

    I can't install Microsoft Security Essentials to clean my already infected computer?
         http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

    Cleaning a compromised system
         http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

    Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

    HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "ofhttp://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

    After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

    4 steps to help protect your new computer before going online
         http://www.Microsoft.com/security/pypc.aspx

    Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer:http://support.microsoft.com/kb/971029

    NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application.

    Norton Removal Tool
         FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    McAfee Consumer product removal tool
         http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

    See also:

    Risks & benefits of P2P file sharing
    http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
    http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

    Measures to help prevent spyware
    http://www.Microsoft.com/security/spyware/prevent.aspx

    Measures to help prevent computer worms
    http://www.Microsoft.com/security/worms/prevent.aspx

    Avoid fake security software!
    http://www.Microsoft.com/security/antivirus/rogue.aspx

    If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

    If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • I have problems with my internet connection only, it keeps freezing and then ask 'end now' and give me and error report. How can I fix it?

    I no problems with any other part of my computer this. I spoke with the standard of the internet, and they said it was something wrong particular to my computer only.

    Hello

    -Did you change on your computer before the show?

    Follow these steps and check if the problem persists.

    Step 1:

    Test the issue in safe mode with network and check if that helps.

    Step 2:

    If the Internet works in safe mode with networking, I suggest you to start your computer in a clean boot State in order to eliminate conflicts of third party software.

    Note: The steps in the article to restart your computer as usual.

  • Problems with WMC Internet TV (Beta) in Vista 32-bit last month.

    Okay, so for those of you who have read my previous posts on Windows Media Center related problems involving the Internet TV beta edition, you know, I've had difficulties to find a fix for a specific problem where Internet TV will not download and gives the error, "No valid, impossible to launch Application" «...» »

    So a few weeks back I found a good deal on a new material and thought I would upgrade my system to a dual core to Hexa core with a new motherboard with AMD 870/850 chipset.  I added some ram DDR3 and low and behold, when I ran my system I have not had any unexpected problems when you use Windows Media Center to which has been about a month now.  That is, until today!  When exactly the same problem happened when I look one online using WMC Internet TV (beta) news.  The error just after I saw a report, at the start of the Internet TV to connect to the next story in the list after I was watching the story I wanted to.  I clicked on the button back in the upper left corner and the second that I did, my screen instead of going back to the next menu, frozen, and then the blue circle came for about 10 seconds.  I was wondering what was the program, and then the exact error even I had before with my old dual core card mother system returned to the top on the screen and it (until) worked normally.

    Conclusion... no matter what Internet TV (beta) is when it is the transfer of information from the internet to the computer, is likely to damage the hardware.  The solution is to buy a new system, which I strongly think that Microsoft should pay back stop (especially when the review is pretty well the whole computer) when it occurs.

    Except of course swaping on hardware is just one of a few ways to fix the same problem, which I see no answers for in all other positions on the issue.

    Hi JohnDR,

    1. What is the full exact error message that you receive?

    It is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you perform a clean boot and check.

    To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See the link below to learn more about how to clean boot.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • unknown problem with my internet connection

    Internet on my laptop (a toshiba pslc0e-00900den running windows vista) decided that he dosnt want to work more. It was working perfectly well one day and the next, just die.

    specifically, Opera internet explore and safari all return him could not load screens page when I try and open them while windows tells me that I am connected to the internet and when I click on diagnose connection problems, it does not find a problem. and the network and sharing Center says that I'm connected to the internet. and I have the computer/globe icon in the lower corner.

    What akes is this harder than two other laptops, one running vista and other Windows 7 both have no problem with the same broadband connection and I haven't touched any of the settings.

    any ideas what may have caused this fault is laptop or is internet Explorer - this something really simple that I'm missing

    I'd appreciate any help or suggestions

    Thank you very much

    Hi calum01,

    1. did you of recent changes on the computer?
    2. What is the exact error message that you receive in internet explore?
    3. do you have security software installed on the computer?

    It is possible that some third-party programs installed on the computer are blocking access to internet in normal mode.

    Method 1

    Check if the computer gets a valid IP address.

    1. open the network and sharing Center by clicking the Start button, clicking Control Panel, click network and Internet, click network and sharing Center.
    2. under connection, click view status.
    3. click on Details.
    Your computer's IP address appears in the value next to "IPV4 IP address" column.

    Continue with the steps only if the computer has a valid IP address below.

    Check if the problem persists in mode safe mode with networking.

    Steps to start in safe mode with networking

    1 restart your computer if it is running.
    2. press the F8 key after your initially on powers computer.
    3. Once you see the menu Advanced Startup Options , you can stop tapping.
    4. use the up/down arrow keys to highlight your selection.
    5. Select Safe Mode with network and press enter.
    6. you should see loading drivers and wait please.
    7. you should then be at the Welcome screen.
    8. connect to your computer using an account with administrator privileges.

    Start your computer in safe mode
    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
    Restart the computer to return to normal mode

    Method 2

    If the problem does not persist in mode safe mode with network, then perform the clean boot and check.
    To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
    See the link below to learn more about how to clean boot.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135

    Reset the computer to start as usual
    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
    1. click on Start, type msconfig in the search box and press ENTER.
    2. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
    3. on the general tab, click the Normal startup option, and then click OK.
    4. When you are prompted to restart the computer, click restart.

    Method 3

    Update the drivers of network card for the last, only if you do not get a valid IP address.

    How can I update the driver for network card on the computer

    1. click on Start, click Control Panel, and then double-click System.
    2. click the tab hardware , and then click Device Manager.
    NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click continue.
    3. click on network adapters to expand.
    4. under network adapters, double-click the entry for your network adapters, and then click driver .
    5. click on Update driver software.
    6. follow the Wizard update software driver to update the driver for NICs .

    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    I hope this helps!

    Halima S - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • a lot of problems with start-up

    2010 Macbook Pro.

    I have many problems with the start-up. I have to turn power off (force) and start my Mac 5 or 6 times before it works. I pass by the Verbose Mode, Safe Mode, single-user mode for her to come at last.

    Other that startup issues very well the functions of Mac.

    It might be that I need to make an appointment with a Mac Genius bartender, but how much money should I be budgeting for it to get this fixed number.

    Some advice about this?

    Please and thank you

    Ask the bartender!

    The evaluation is free. One note though: 2010 models are known for their graphics processor failure. If that's what the cause of your questions, need to replace the logic board. Since it is the age which is not advisable (too expensive).

  • Problem with start

    Hello! I'm new to the forum and I have a serious problem with my laptop, it's the starup my pc keeps everyone to suddenly stop and the message that appears tells me that it's supposedly overheating and there I tried to remove the battery and work directly on the sector, but the problem is still not resolved. Who can help me to quickly solve the problem? Thank you
    PC brand: HP G72

    Hi, start screen display 30 b error?  If so, it should be associated with fan. You will need to check the fan - something that doesn't work don't as appropriate no - dust-dirts or sth captured inside fan... Thank you!

  • Satellite A200/A205 - problems with start-up and sleep modus

    I have a problem with my Toshiba (running on Windows Vista).

    When I start the computer, sometimes it starts normally. But often, it starts to beep, I can hear the fan start fan and lights up blue. But the system unbootable and I see only a black screen. When I turn off and try again, the ringtone happen or it starts normally. Sometimes I have to turn it on three times and sometimes it starts the first time.

    The other problem is when my laptop into sleep mode. Sometimes when I push to the bottom of the screen, but also when it rises. It turns into sleep normally, but it won't come out. I see only a black screen. I always turn it off and restart.

    I don't know much about computer and computer-language programs, but I really hope someone can tell me what to do. I bought recently and I can't work with it like I want to.

    Hello

    This code beep at startup always means there's a bad material work so I think that there is not much you can do.
    The problem could be related to everything, RAM, card graph, processor, motherboard, etc. and it is not easy to diagnose it exactly.

    What you can do is to test the RAM with Memtest86 or other memory diagnostics tool. Maybe he can find something

    If this isn't the case, I recommend you contact an authorized service provider. Guys can you help solve this problem. :)

Maybe you are looking for

  • The photos on my site header are not formatting correctly in Mozilla. How can I fix it?

    Hello Photos header on every page of my site are not formatting correctly in Mozilla. The photos appear on the right side of the site and you need to scroll over to see. They work on other browsers such as Chrome and Safari. How can I fix it? Here is

  • How to remove Keybar 2.3

    I have KeyBar2.3 in my Firefox toolbar. I am running WIN XP. I can't find KeyBar or any other unusual program in Add/Remove programs. I can't find anything unusual in my Firefox Add Ons. I also can't find anything on the web about any KeyBar version

  • You forgot your password do not send e-mail

    You try to reset my pass Sync FF because I've migrated to a new machine and I forgot my password. Go to https://account.services.mozilla.com/forgot recognize my user name and the reports that the e-mail was sent, but I have nothing in my Inbox (or sp

  • HP15-D005TU: computer laptop screen changed from pink color gradient

    HelloI use a laptop HP 15-D005TU,Today morning when I played the game the screen become suddenly rose on it that appeared in the pink shade, also the battery drains very fast (about 1% within 1-2 minutes) he restarted normal shortly, got a few minute

  • muvee reveal problems error: Muvee Reveal has stopped working

    Original title: muvee reveal problems I have Vista Home Premium. I wasn't able to use Windows movie maker with my Nikon Coolpix camera. Windows does not recognize videos ending in .mov.  So I purchased a Muvee Reveal software. No problems in the crea