Problem with test connection

Similar Questions

• Siri does not (problems with the connection)

  Hello

  I installed macOS Sierra yesterday. Everything seems to work fine, except Siri. With Siri I always get an error message "I am having some problems with the connection. Please try again in a moment. ». But this seems to appear every time. The network connection works fine, I can't access the Internet without problem.

  No idea how solve the problem?

  I use an iMac (27 inch, mid-2011). Internal microphone is connected, I also see the 'waves' change while I am speaking.

  Concerning

  Thomas

  Hey, thochstrasser. Thank you for using communities of Apple Support.

  It seems that Siri is reluctant to make his debut on your iMac after upgrade to Mac OS Sierra. I want to make sure that you get the benefit of this new feature on a Mac.

  1 try safe mode if your Mac does not start -even if your iMac to market, safe mode makes sure it starts successfully.

  2. How to test a question in an another user account on your Mac - since this is most likely a software problem, test to another user will indicate if it is right to your user account or throughout your system.

  3. use Time Machine to back up or restore your Mac - if it seems to be systemic, the next step should not cause problems. But it is always better "to have" a backup to the "need".

  4. on OS X Recovery - the issue as part of the operating system, reinstall should do.

  Have a great weekend!

• Sierra Siri, «I have some problems with the connection...» »

  Guys,

  I just installed Sierra on my MacBook Pro (retina, 13 inches, early 2015) version 10.12. I can't get Siri at work, the app tracks, he hears what I'm saying, but after awhile, he returns with two messages, both on the screen and verbally "I have some problems with the internet connection. Please try again in a moment. "&"Sorry, I'm having problems with the connection. Please try again in a moment. »

  Any ideas?

  Thank you

  N

  It's a network problem.

  Check the proxy settings that blocks maybe, or a firewall.

  System Preferences > network > Advanced (for your current connection) > Proxies

  Something there?

• Siri having problems with the connection.

  Hello

  I have an iPhone 6 Plus, 64 GB with IOS version 9.3.3 (G 13, 34) and the carrier is Vodafone.

  I have problems with Siri, feel when I asked her a task (research or appeal), after a few seconds of waiting, the answer is always "sorry, I have a problem with the connection. Please try again in a moment. »

  I have the right connection with Internet with WIFI and 4G data stream.

  I did reset network settinjg, but I don't see any improvement.

  Please indicate what I can do and if it's a common problem with the iphone 6.

  Thank you!

  CC

  After the reset of the iPhone ("home" button and close button for 10 seconds, with the iPhone connected to the computer), Siri works!

  I am concern I have to do this reset every 2-3 weeks if I need services of Siri...

  Good luck to all of you who have the same problems with their iPhone of hares!

  CC

• problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  On the Pro iPad, tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then try to connect to your Wi - Fi network.

  If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

• Is a message "cannot find server" a problem with Internet connectivity or something else?

  Original title: Net question?

  When I get a message "cannot find server", is this a problem with internet connectivity or something else?  MSN and explore will be not open.  Thank you.

  Hi Aziz,.

  The Cable Guy came and installed a new modem and the new thicker cable.  So far so good.  Thanks for your reply.

• problem with Internet connection sharing, error: connection ad - hoc has "no internet access" on the cell phone of the customer

  Original title: problem with Internet connection sharing

  my laptop running on Windows Vista Home Premium SP2 (this one has access to the internet by using the dial-up modem and will to act as a sharer of internet connection or as a host) and the client computer runs on Windows 7 Starter

  in a first step, I try internet connection sharing, I've set up an ad hoc network and I just changed my setting modem dial-up on the sharing tab, of course what I change, it of 'Allow an other network users to connect through this computer internet connection' and choose the on Home Networking connection wireless network connection , then my mobile client to connect to a special that I created and portable client connected to the internet via ICS
  then the problem came when I restart my laptop. When I tried to use ICS once again, my customer laptop really takes a long time to connect, he continues saying 'identification' side host and client. and after that "identify" is complete, it says ad - hoc connection, I create has "no network".
  so, I'm a person answer in this forum
  ' Obtain an IP address automatically is the wrong setting on the Ethernet connection. "  To return to the sharing tab and unshare the wireless connection.  Close all windows network, and then open them and re - share the wireless connection.  Who must configure IPv4 for the Ethernet connection properties for:

  IP address: 192.168.0.1
  Subnet mask: 255.255.255.0
  Default gateway: no
  "DNS server: none.

  I put this on my laptop of the host, and and I put the IP address on my laptop customer in 192.168.0.2 with the same default gateway as my portable computer host IP

  and made some progress in this case, when I try to connect host and the client is no longer to 'identify' phase, immediately connected laptop both but my mobile client can not connect to the internet and displays "No Internet access" on the ad hoc network, I have create

  I tried a lot of things but always completed my mobile client can not connect to the internet and displays the message "no Internet access.

  What makes me confuse is first, I try to share the internet connection everything works like a charm, I set up an ad hoc network, and then change the setting on my modem dial-up so he can share the internet connection, and voila, computer laptop client connected to the internet. I change even not all IP settings

  But why after I restart my PC, this problem comes...

  someone knows how to help me with this problem?

  Hey, Mimbs,

  You can try the similar thread to the next with a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/no-Internet-access-in-the-client-machine-when/77312e09-4385-41FA-A420-0c42be58e4e3

  Also for reference:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

• Problem with ethernet connection

  Hello

  I have a Netgear DGN2000 modem-router with 4 ethernet ports and wireless connectivity. I already connected a pc in an ethernet port and a laptop in another ethernet port and wireless. Everything works fine.

  I bought 2 notebooks same, HP Compaq 610 with windows 7 Home premium and both with a marvell yukon 88E8042 fast ethernet controller and another a wireless card.

  WiFi works fine for the two laptops with the router. But they can't connect via ethernet.

  I tried all 4-port router, I tried with 3 different cables, I have tried with two firewalls (the laptop and the router) out, I set the router to its latest firmware and also each update for windows 7. I also tried to disconnect any connection between the router and I test a laptop each time and all ethernet ports router too. I tried hard reset my router too. Also an uninstall the network driver and rebooted the laptop to find him by his own and reinstall. But I still have the same problem.

  I see the Green and orange laptop LED flashing for about 1 second and also the number of the port on the router connected but they can not connect so they all stop flashing. Then on 10-15 sec, they tried again, but still the same...

  Windows Network Diagnostics revealed that:

  "Problems found."

  "An Ethernet cable is not plugged in correctly or maybe broken not being fixed.

  The connection to the Local network showed that it is unplugged.

  I run the windows Upgrade Advisor 7 and it said that all devices (and the netwrok adapter) are very good.

  The adapter works correctly, as shown in its properties...

  After all, I thought it was a problem with network cards. Of course, it was weird that this happens to two laptops, the same. So I tried the same cable that I used for my router and another router. They have both worked with the other router! This means that the adapters do not have a problem.

  I have to talk to a technician of HP in Greece and I described the problem, but its response has been that it can find no problem with the laptop (which is not a lie as long as the NIC is working with the other router, I tried).

  My router has no problem as long as it works properly with my pc via ethernet...

  So where is the problem?

  Can you help me please?

  I only have an internet connection via ethernet. Now I can have wireless only.

  I bought a new modem router (Belkin Wireless Router annexed part N USB) and now everything seems to work properly.

  LAN speed is 100 Mbps, wireless network is also very good, so I guess the problem was my previous router.

  Thank you guys for your responces anyway.

• problem with the connectivity of customers after mixing several models with WLC 5508 Setup WLAN ap

  Hello

  I have 2 5508 wlc and AP 1130 and 1200 in my test harness.

  Currently, WLAN set is in place and works very well but the customer become a frequent problem with the power of the weak signal same AP is installed very near the place of the customer.

  I have my doubts, if I have a question because I use several models of AP in my set-up?

  How to rectify the same question?

  Some time customer gets limited connectivity, means that they usually get IP also.

  What are all the parameters to check in WLC?

  (1) very difficult for a person on a forum to respond. Check if your AAA server was indeed seen as inactive at the same time for other devices.

  If this is not the case, check the network connectivity between the 2. Maybe packets are lost between wlc and aaa server...

  (2) as I mentioned, it may have nothing to do with clent near or far from the AP. What happens if your DHCP server is not responding to the client? What happens if the dhcp request never reaches the level of the DHCP server for some reason any?

  You must investigate all along path to find out why the customer is not getting an ip address.

  Troubleshooting involves trace of sniffer, debug, client, etc...

• problem with the connection to the client in Primavera P6 E8.1 option

  Hallo!
  
  I have a problem with connecting to Primavera P6, the problem has been mounted a few times.
  
  When I try to connect, it's stops with the error:
  
  Event ID was intercepted.
  
  It's the details of the problem, it is same for primavera and primavera P6R8.0 customer P6R8.1.
  
  I think that there happens because that application have no privilege to certain folders or the registry branch.
  
  Can someone help me?
  
  *****************************************************
  * EXCEPTION REPORT OF *.
  *****************************************************
  Date: 05.08.2011 16:25:07
  
  Executable file: PM.exe
  Application: Primavera P6 customer optional E8.1 project management
  Event code: ECH-3843-7
  Message:
  Creation of the hash error
  
  Context:
  1: TfrmLogin.FormCreate
  2:
  3:
  4:
  5:
  6:
  7:
  8:
  9:
  10:
  
  Detail:
  Type: Exception
  Object type: TCDBEdit
  
  
  
  Information system
  ===========
  User name: administrator Hostname: ITNCLIENT
  OS version: Windows NT ver 5.1, build 2600 Service Pack 2 (Intel Pentium)

  "There's this metalink note" error: "ECH-3843-7 - error creating Hash" when trying to Log in P6 R8 Professional Client or P6 R8 Client Web [1273082.1 ID] "which indicates the solution is

  Solution
  Please refer to the sales document P6 R8 Configurations tested in order to know what P6 EPPM R8 has been tested with operating systems. If you encounter this error on Windows XP Service Pack 2, please upgrade to Windows XP Service Pack 3.

  Sachin

• Anyone having problems with WiFi connectivity after upgrade to Sierra?

  I was wondering if anyone else knows issues with WiFi connectivity since the upgrade to Sierra 10.12? I have not had any problems with connectivity WiFi previously on El Capitan. Now I have regular randomly loose connectivity. My internet is cable and when it is connected I have a 100% connection. My details of iMac and I have used only 10% of my storage.

  

  No problem with my iphone 6.

  Hello AspDesigns,

  I understand that, since the upgrade to Mac OS Sierra, your Mac seems to have trouble staying connected to Wi - Fi. Fortunately the diagnosis built-in wireless can help identify the source of so much trouble.

  Search for Wi - Fi using your Mac problems

  See you soon!

• Some Gmail features failed to load due to a problem with Internet connectivity.

  This error message appears both with Firefox and Chrome when using G mail. Also if it works at all.
  switching to compose for the project just takes a long time or stop working.
  No problem with G mail using Internet Explorer or Safari.
  I have used Firefox for years and want to go back when I can solve this Vexing problem.

  Try to start the computer in safe mode Windows with network support (on the startup screen, press F8) as a test to see if this helps when your security software is involved.

• Problem with WiFi connectivity in windows 8.1

  Hello

  I have problems with my Wifi on my HP Pavilion 15 Notebook (product number: G2H02PA-#ACJ)
  I have Windows 8.1 as well as Ralink RT3290 802.11bgn Wi - Fi adapter.
  
  My Wifi connection says LIMITED connectivity. I've already complained about my problem on the HP support by phone. But I don't have any solution for my problem. Technician a driver wifi re-installed and the Bios but did not get any solution. Customer support sent me some links to update the driver but not got any solution again.
  I tried to install different versions of drivers for card Ralink WLAN ! Still without success!
  I am writing this post from my other laptop that my wifi router running on other devices!
  
  Pending a solution so that I can use internet on my new laptop computer.
  
  Thanks in advance for any solution.

  I also had this problem and corrected.

  To correct the problem of wifi... open charms bar... in the search window, type device manager in Device Manager... double click network adapters, right-click right on... Qualcom Atheros QCA 9565802.11b/g/n wifi adapter... right click and click on uninstall.

  A pop window should open asking you to confirm. Confirm by clicking on... Ok.

  After that, restart your laptop.

  Your wifi should be visible in the networks. You can then connect to your network of your choice.

• Satellite C600/C660D - problems with WLAN connectivity

  Hi guys

  I recently bought a Toshiba Satellite C660/C660D laptop to replace my old. I set up a wireless connection at home too. According to my laptop and wireless connection that I am connected but when I go to use internet and try to search for something it won't let me. I ran the troubleshooting and Diagnostics over and over again and the message I get is "your computer seems to be correctly configured but the device or resource is unresponsive."

  It is not a problem with the internet connection that I tried to plug in on my old Toshiba laptop and it works perfectly well and my sister tried it also on his Sony laptop and no connection problems.

  Is there a setting that needs to be adjusted?
  I would be very grateful for any assistance with this and as I don't know what else to do. its starting to get a bit frustrating now

  Thank you

  It's very strange.
  Have you noticed the same thing using different browsers?
  You can use any other application like Skype or MSN?

  What you can try is to update WLAN driver.

  Please visit Toshiba s WLAN portal and install the latest driver for your WLAN card - http://aps2.toshiba-tro.de/wlan/

• Problem with wireless connection with Satellite U500

  Hello
  Three months ago, I bought a Toshiba laptop Satellite U-500 (Windows Vista). I have a problem with the wireless connection - sometimes, it does not work and I have to restart pressing F8 and repair, then the connection is re-established; If I put into hibernation the connection is intact, but after a stop the problem maybe redo surface after the 2nd or 3rd session.

  I tried to format it, but it worked only for a while. The 2nd item in network adapters in the device (Realtek RTL8192E Wireless LAN 802.11n PCI-E NIC) Manager shows a yellow exclamation point. The message is this:
  "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  Could you please help. I have sky broadband and am currently connected via the ethernet cable.

  Thank you
  Fauzan

  For 32-bit Vista go here [http://uk.computers.toshiba-europe.com/innovation/vista_drivers.jsp?macId=&LNG=1&mode=allMachines&us erOS = & action = search & SelCategorie = 2 & selFamily = 2 & salts Eries = 198 & selProduct = 855 & selShortMod = 1 & selOS = 26 & selType = all & country = 8 & language = 13 & searc h =] and download and then run the wireless LAN driver. That should clear the «!» If it isn't you can also find the vista driver at [http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=9&PFid=9&Level=6& Conn = 5 & DownTypeID = 3 & GetDown = false & downloads = true #R TL8192E]