Problem with the AJAX server process

Similar Questions

• I installed AVG 9.0 and now I get the following MSN Explorer pop up of message.__You are unable to connect to your e-mail server. There may be a problem with your Internet connection, or a problem with the mail server. Pleas try again.

  I installed AVG 9.0 and now I get the MSN Explorer pop next message.
  You can not connect to your mail server. There may be a problem with your Internet connection, or a problem with the mail server. Pleas try again.

  Sure.  Analysis of your e-mail anti-virus program:

  • Can slow to receive and send messages, or even fail.
  • Can damage files of storage for messages that you've already sent and received, making it inaccessible messages.
  • Is not necessary.  If you receive an infected attachment and try to open it, the protective device in real time of your antivirus program will block the infection.

  Here are a few web pages accurately:

  Why you don't need your anti-virus program to scan your e-mail
  The other threat email: the Corruption of files in Outlook Express
  Why some antivirus software can change the settings in e-mail programs
  Email scanning - advantages and disadvantages

• error message "there is a communication problem with the web server."

  I'm trying to connect to three rivers FCU website www.3riversfcu.org and I get the message error "there is a communication problem with the web server." I am running Windows 7 on Toshiba laptop. No idea how to solve this problem? Something in the settings?

  Hi, Mayhem15,

  See if this troubleshooting help.  It was written for Windows XP, but in many cases, these documents still apply for more recent versions of Windows.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

• Im trying to download After effects, it fails each time and wrote a problem with the download server?

  Im trying to download the effects after trial, but each time it starts to download fails and told them something wrong with the download server?

  Hi d3signerg3y,

  What operating system are you using. You are on a managed network.

  Please see the Ko: http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html .

  Kind regards

  Romit Sinha

• Problem with the connectivity Server MSSQL of ODI 10.1.3

  Hello
  
  In one of the interface we are filling for the target table in MSSQL Server 2005 version.
  The results of successful physical topology connection.
  
  For so long there is no problem and it runs successfully. But all of a sudden I am facing problems with this.
  
  I can't see data warehouses under the template created for this table. During the enlargement process of the model, during an attempt to overthrow the model or when I try to save the changes to the package, I get the error below.
  
  java.lang.UnsupportedClassVersionError: com/microsoft/sqlserver/jdbc/SQLServerDriver (unsupported major.minor version 49.0)
  
  at java.lang.ClassLoader.defineClass0 (Native Method)
  
  at java.lang.ClassLoader.defineClass (unknown Source)
  
  at java.security.SecureClassLoader.defineClass (unknown Source)
  
  at java.net.URLClassLoader.defineClass (unknown Source)
  
  in java.net.URLClassLoader.access$ 100 (unknown Source)
  
  java.net.URLClassLoader to $1.run (unknown Source)
  
  at java.security.AccessController.doPrivileged (Native Method)
  
  at java.net.URLClassLoader.findClass (unknown Source)
  
  at java.lang.ClassLoader.loadClass (unknown Source)
  
  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (unknown Source)
  
  at java.lang.ClassLoader.loadClass (unknown Source)
  
  at java.lang.ClassLoader.loadClassInternal (unknown Source)
  
  at java.lang.Class.forName0 (Native Method)
  
  at java.lang.Class.forName (unknown Source)
  
  at com.sunopsis.sql.SnpsConnection.a (SnpsConnection.java)
  
  at com.sunopsis.sql.SnpsConnection.u (SnpsConnection.java)
  
  at com.sunopsis.sql.SnpsConnection.connect (SnpsConnection.java)
  
  at com.sunopsis.dwg.reverse.Reverse.a (Reverse.java)
  
  at com.sunopsis.graphical.component.b.a.g.a (g.java)
  
  at com.sunopsis.graphical.component.b.a.g.a (g.java)
  
  at com.sunopsis.graphical.component.b.a.d.a (d.java)
  
  at com.sunopsis.graphical.component.b.h.e (h.java)
  
  at com.sunopsis.graphical.component.b.h.b (h.java)
  
  at com.sunopsis.graphical.component.b.h.b (h.java)
  
  at com.sunopsis.graphical.component.b.h.b (h.java)
  
  at com.sunopsis.graphical.component.b.h.a (h.java)
  
  at com.sunopsis.graphical.frame.module.SnpsSplitFrame.refreshSplitFrame (SnpsSplitFrame.java)
  
  at com.sunopsis.graphical.frame.module.SnpsSplitFrame.refreshNode (SnpsSplitFrame.java)
  
  at com.sunopsis.graphical.frame.bp.bN (bp.java)
  
  at com.sunopsis.graphical.frame.bp.bL (bp.java)
  
  at com.sunopsis.graphical.frame.a.is.bH (is.java)
  
  at com.sunopsis.graphical.frame.bo.r (bo.java)
  
  at com.sunopsis.graphical.frame.bo.bv (bo.java)
  
  at com.sunopsis.graphical.frame.bo.z (bo.java)
  
  at com.sunopsis.graphical.frame.bo.b (bo.java)
  
  at com.sunopsis.graphical.frame.w.actionPerformed (w.java)
  
  at javax.swing.AbstractButton.fireActionPerformed (unknown Source)
  
  in javax.swing.AbstractButton$ ForwardActionEvents.actionPerformed (unknown Source)
  
  at javax.swing.DefaultButtonModel.fireActionPerformed (unknown Source)
  
  at javax.swing.DefaultButtonModel.setPressed (unknown Source)
  
  at javax.swing.plaf.basic.BasicButtonListener.mouseReleased (unknown Source)
  
  at java.awt.Component.processMouseEvent (unknown Source)
  
  at java.awt.Component.processEvent (unknown Source)
  
  at java.awt.Container.processEvent (unknown Source)
  
  at java.awt.Component.dispatchEventImpl (unknown Source)
  
  at java.awt.Container.dispatchEventImpl (unknown Source)
  
  at java.awt.Component.dispatchEvent (unknown Source)
  
  at java.awt.LightweightDispatcher.retargetMouseEvent (unknown Source)
  
  at java.awt.LightweightDispatcher.processMouseEvent (unknown Source)
  
  at java.awt.LightweightDispatcher.dispatchEvent (unknown Source)
  
  at java.awt.Container.dispatchEventImpl (unknown Source)
  
  at java.awt.Window.dispatchEventImpl (unknown Source)
  
  at java.awt.Component.dispatchEvent (unknown Source)
  
  at java.awt.EventQueue.dispatchEvent (unknown Source)
  
  at java.awt.EventDispatchThread.pumpOneEventForHierarchy (unknown Source)
  
  at java.awt.EventDispatchThread.pumpEventsForHierarchy (unknown Source)
  
  at java.awt.EventDispatchThread.pumpEvents (unknown Source)
  
  at java.awt.EventDispatchThread.pumpEvents (unknown Source)
  
  at java.awt.EventDispatchThread.run (unknown Source)
  
  
  I checked below:
  
  Is the SQL server version: MSSQL 2005 Server
  the "sqljdbc.jar" file is there in place "< ORACLE_HOME >/oracledi/drivers".
  Java version: jdk1.5.0
  
  
  There is no change in the source or target db. Please help me solve this problem

  In my view, there more to see the java version compatibility.

  Please visit this link - http://techtracer.com/2007/10/10/resolving-the-unsupported-majorminor-version-490-error/

• Problem with the Toshiba recovery process

  Hi guys,.

  I had some problems with my laptop and decided to return to the factory settings. But during the process, because of a few mistakes that I didn't understand, formatting process was broken and I guess that the recovery in my hard drive section was damaged. So, I could not use boot from the hard drive. Becacuse Toshiba did not give me recovery disk when I bought it, I had to boot the pc with cracked windows. I never use illegal software, but I had to do this temporarily. In any case now Toshiba has sold me an extra price, thank you Toshiba!

  Today, I had the cargo, and Toshiba Turkey sent two recovery disks. In the first disc, there are preinst.swm files under the ZZIMAGES folder. And in the second disc, there are some files named as bin, efi, planfolder, boot, sources etc.

  What should I know? Hot to go back to my original windows? And how can I do a recovery of these two DVD recovery usb drive?

  Thank you, best regards better.

  Any help pls?

• Problem with the DHCP server IP address

  Hello

  a new installation of LAN, two VSS pair core 6509, 15 closets, with piles of 3750. Floor 15 only, host devices can ping the DHCP server, but cannot acquire IP addresses. not this problem on other floors?

  PortFast a dother settings are intact.

  your thoughts with be appreciated.

  Massoud

  Are the trunks will switches closets for the vlan, the DHCP server is in?

  Sent by Cisco Support technique iPhone App

• Troubleshooting performance problems with the mail server on the virtual computer

  I have a virtual machine with a mail server installed on a windows OS. But all of a sudden, my clients on the server response times decreased significantly.

  This could be the cause of this problem?
  It could be to do with the network, storage, or resources, but I don't know what steps I could take to determine fault

  Would someone mind helping me with the steps I could take to solve this problem?

  Thank you

  The below document page 20 and 21 accurate meters, you should look at the virtual machine level.

  http://www.VMware.com/files/PDF/Exchange_2010_on_VMware_-_Best_Practices_Guide.PDF

  These counters can be used for any virtual computer not only Exchange.  If you are familiar with ESXTOPs I believe that the best way to deep dive in the diagnosis of performance problems.  Also here is a link for these parameters.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1008205

  This link takes you to http://communities.vmware.com/docs/DOC-9279 which has the description on the stats.

• Problem with the DNS server

  In our field, we want to use the Standalone DNS (domain with ads & DHCP server) for a task. We cannot have IP - name resolution. Why & what could be the solution? (we tried to create the area of reverse lookup PTR record int, but did not)

  Hi Muhammad,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server forums.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• PIX 501 problems with the web server internal.

  I want to open for my internal Web server, so it can be accessed from outside and I read about it here and how to do it and I do what I think of his right, but I can´t operate.

  Now I just tried to open the http port standard 80 but later I want to open a specific port and also use SSL on the web server for added security.

  Then I would like my setup now get help and also how to do when using other ports and SSL later.

  Thanks Thomas!

  6.3 (1) version PIX

  interface ethernet0 10baset

  interface ethernet1 100full

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  alfta hostname

  domain ciscopix.com

  names of

  name 192.168.1.16 TerminalPC

  name 192.168.3.0 Lager

  permit 192.168.1.0 ip access list inside_nat0_outbound 255.255.255.0 192.168.2.0 255.255.255.0

  permit 192.168.1.0 ip access list inside_nat0_outbound 255.255.255.0 255.255.255.0 Lager

  permit 192.168.1.0 ip access list outside_cryptomap_20 255.255.255.0 192.168.2.0 255.255.255.0

  permit 192.168.1.0 ip access list outside_cryptomap_40 255.255.255.0 255.255.255.0 Lager

  outside_cryptomap_60 ip access list allow

  192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0

  outside_access_in tcp allowed access list all eq www

  host 62.108.197.90 eq www

  IP outdoor 62.108.197.90 255.255.255.192

  IP address inside 192.168.1.254 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  location of PDM 62.108.197.10 255.255.255.255 outside

  location of PDM 62.108.197.11 255.255.255.255 outside

  location of PDM 192.168.1.0 255.255.255.255 inside

  location of PDM TerminalPC 255.255.255.255 inside

  location of PDM 192.168.2.0 255.255.255.0 outside

  location of PDM Lager 255.255.255.0 outside

  location of PDM 192.168.2.0 255.255.255.0 inside

  location of PDM 62.108.197.137 255.255.255.255 outside

  location of PDM 62.108.197.137 255.255.255.255 inside

  location of PDM 195.67.210.72 255.255.255.255 outside

  location of PDM 62.108.197.90 255.255.255.255 inside

  PDM logging 100 information

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  static (inside, outside) tcp 62.108.197.90 www TerminalPC www netmask 255.255.255.255 0 0

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 62.108.197.65 1

  Enable http server

  http 62.108.197.10 255.255.255.255 outside

  http 62.108.197.11 255.255.255.255 outside

  http 195.67.210.72 255.255.255.255 outside

  http 192.168.1.0 255.255.255.0 inside

  http 62.108.197.137 255.255.255.255 inside

  enable floodguard

  Permitted connection ipsec sysopt

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set esp strong - esp-sha-hmac

  outside_map 20 ipsec-isakmp crypto map

  card crypto outside_map 20 match address outside_cryptomap_20

  peer set card crypto outside_map 20 195.198.46.88

  outside_map card crypto 20 the transform-set ESP-DES-MD5 value

  outside_map 40 ipsec-isakmp crypto map

  card crypto outside_map 40 correspondence address outside_cryptomap_40

  peer set card crypto outside_map 40 62.108.197.137

  outside_map card crypto 40 the transform-set ESP-DES-MD5 value

  outside_map 60 ipsec-isakmp crypto map

  card crypto outside_map 60 match address outside_cryptomap_60

  peer set card crypto outside_map 60 195.198.46.88

  card crypto outside_map 60 the transform-set ESP-DES-MD5 value

  outside_map interface card crypto outside

  ISAKMP allows outside

  ISAKMP key * address 62.108.197.137 netmask 255.255.255.255

  ISAKMP key * address 195.198.46.88 netmask 255.255.255.255

  part of pre authentication ISAKMP policy 10

  encryption of ISAKMP policy 10

  ISAKMP policy 10 sha hash

  10 1 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  part of pre authentication ISAKMP policy 20

  encryption of ISAKMP policy 20

  ISAKMP policy 20 md5 hash

  20 2 ISAKMP policy group

  ISAKMP duration strategy of life 20 86400

  Telnet 192.168.1.0 255.255.255.255 inside

  Get out your ACL - access-list outside_access_in permit tcp any host 62.108.197.90 eq www

  And a new application:

  outside_access_in list access permit tcp any host 62.108.197.90 eq www

  Access-group outside_access_in in interface outside

  * You have the group-access above on your original configuration message, BUT not on the above post.

  Don't forget to issue clear xlate after the change and also record with write mem.

  Try to do this in the pix CLI instead of using PDM.

  Hope this helps and let me know how you go.

  Jay

• Hi, problem with the selection and processing

  I'm having problems with re-sizing any shape using the Selection (V) tool. It did not work properly, I don't know how it has stopped working. Is it possible to fix this?

  Thank you.

  Navid

  Navid,

  Display > display the bounding box?

  CTRL / Cmd + Shift + B to toggle between Hide and Show, one of the regular keyboard mishits.

• Some problems with the execution of process OWB flow

  We have several process flows in OWB. The main process flow called several Sub process flow, for example MAIN_PRF (main process stream) PRF1, PRF2, FRP - 3, PRF4 and PRF5 and the sub process flows.
  
  Each of the 5 process flow run one after the other that is first PRF1, PRF2, next FRP - 3 and so on in the series. A few times when we run the MAIN_PRF main process flow, some of the streams of process gets skipped. For example, it runs PRF1, PRF2, PRF4, PRF5. It ignores the FRP-3. It's very irratic. Sometimes if redeploy us the process flow, it works very well. We do not know what causes this problem. We checked the IDS of transition state and everything seems OK.

  Hello!

  I think I know the problem, sometimes, when you remove and then add a few activities (subpro, cards), outgoing transitions blend. Right-click on your subprocess in your process Editor, click on edit details. Then out of the Transitions.
  You will see the next outgoing transition after execution of this unique process. If sure that the next thing that you want to run the command id 0, sometimes if there is more then one outgoing transition, they get the same value when remove you / add the process.

  You can change the command id by dragging the row up/down in the list.

  Let me know if it resolve you anything.

  See you soon

• Problem with the path_translated server variable &amp; amp; CFMX7

  I think that something may be wrong with ColdFusion. I have a test site (specially created to test this issue) running on IIS 6, which has just a plain old index.cfm index.html. When I navigate to index.cfm/someotherdirectory/non-existantdirectory/whatever/index.cfm, it evokes the index.cfm basis.
  
  When I try to do the same thing with the html file, it gives me a 404 error. How can I force ColdFusion to give a 404 in this circumstance?

  Fireye-wrote:
  > I think that something may be wrong with ColdFusion. I have a test site
  > (specially created to test this issue) running on IIS 6, which has just a
  > plain old index.cfm and index.html. When I navigate to
  > index.cfm/someotherdirectory/non-existantdirectory/whatever/index.cfm, it
  > shows the base index.cfm.
  >
  > When I try to do the same thing with the html file, it gives me a 404 error.
  > How can I force ColdFusion to give a 404 in this circumstance?

  Make sure you that you enabled "check that file exists" in the IIS mapping.
  If that doesn't cut, find the web.xml file and comment out the research
  Security engine section (ITS).

  Jochem

  --
  Jochem van Dieten
  Adobe Community Expert for ColdFusion

• Problem with the Xwindows server where the letter 'g' is constantly typed.

  I installed Cygwin and Cygwin-x, which opens an Xwindows server to display graphics for a program I am writing. Unfortunately, when the xWindows terminal window appears, the letter 'g' starts to get typed, without input from me I have restarted my computer several times and reinstalled Cygwin, but the problem has not disappeared, so I suspect it has something to do with Windows itself. The ghost 'g's only appear in this context, not as long as any other program is running, so I don't think that the key on the keyboard is broken. Do you know any solution for this? Thanks for your help.

  Hello

   
  It seems that the problem of compatibility. We did check the compatibility of programs with Windows Vista and can't find any information.
  Please visit this link for more information: http://www.microsoft.com/windows/compatibility/windows-vista/Search.aspx?type=Software&s=Cygwin
   
  We recommend that you contact the vendor of the program for more support options.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• problem with the expired Server license?

  2 problems
  1. get a warning: the server license expired message when you access the e-mail from comcast box?
  2-unable to complete the download of firefox update? error message, something blocking it - don't want to download everything again to avoid losing all the bookmarks and my custom settings!

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".