Problem with the auto-merge layers

Similar Questions

• URGENT: Photoshop CC 2015 ERROR *: unable to complete the auto-merge layers command because there is not enough memory

  

  I recently downloaded Adobe CC 2015... Face serious problems with the PS when I try to superimpose images.

  
  

  Here are the steps I followed:

  1. file-> Scripts-> battery files

  2. five selected. CR2 files (average size 28 MB)

  3. click on Ok

  4. once photoshop has completed her treatment, selected layers and Edit-> auto-merge the layers-> stack of Images

  Please note that I followed the same steps in converting the CR2s in JPEG... same error result

  Error result

  PS throw up a dialog error: could not complete the automatic Layer Merge command because there is not enough memory

  Expected result

  Photoshop must accomplish the task of auto-merge layers

  Details of the information system

  Here is the report system in case it is useful

  Information system writes to report: 29/11/15 13:23

  Name of the operating system Microsoft Windows 7 Professional

  Version 6.1.7601 Service Pack 1 Build 7601

  System model Inspiron 5520

  System Type X 86-based PC

  Intel Core processor i5 - 3210M CPU @ 2.50 GHz, 2501 Mhz, 2 Lossnay, 4 logical processors

  A14 BIOS Version/Date Dell Inc., 13/05/2013

  SMBIOS Version 2.7

  Hardware Abstraction Layer Version = "6.1.7601.17514".

  The time zone India standard time

  Physical memory (RAM) installed 8.00 GB

  2.39 GB total physical memory

  1.26 GB available physical memory

  4.77 GB total virtual memory

  2.92 GB available virtual memory

  2.39 GB page file space

  Name	GPU Intel(r) HD 4000
  Adapter type	Compatible with Intel(r) HD Graphics Family, Advanced Micro Devices, Inc.
  Description of the adapter	GPU Intel(r) HD 4000
  RAM card	1.01 GB (1,080,743,936 bytes)
  Driver version	8.951.9.1000
  Name	AMD Radeon HD M 7670
  Adapter type	Card compatible (0 x 6840) ATI graphics, Advanced Micro Devices, Inc.
  Description of the adapter	AMD Radeon HD M 7670
  RAM card	1.00 GB (1 073 741 824 bytes)
  Drivers installed	aticfx32.dll, aticfx32.dll, aticfx32.dll, atiumdag.dll, atidxx32.dll, atiumdva.cap
  Driver version	8.951.9.1000

  I guess the real problem here is the drive working, not RAM. They both found messages 'insufficient memory '.

  Historically, Photoshop has always been remarkably well with large files and little RAM. Excess data which cannot be held in RAM are written to the drive to work, and even if it slows down things considerably, it really requires a lot to run Photoshop to a complete stop.

  Of course, you must move to a 64-bit version of Windows. As it is, Photoshop can use less than 2 of your installed 8 GB of RAM. It's not much, but do not attempt to allocate more than 70% in the PS preferences. Process of the operating system and other applications need RAM too. Allowance too will choke the rest of your system and send it to pimples without end-of-file exchange.

• Problem with the Auto-Snapshot manager after domain change

  Hello

  I have a client with a FailoverCluster Hyper-v and CSV.

  They recently changed their internal domain name, and since then, they have problems connecting to the PS Group in the Auto-snapshot Manager.

  I get an error saying:

  An error occurred processing action: Discovery.
  An exception was thrown by the target of a call.

  I hope someone can point me in the right direction :)

  Anders

  I suspect that your iSCSI initiator has problems connecting to volumes - and your problem is, in fact, isolated ASM / me.  Check the RUNAS account used on the services of the DSO to ensure that they use the appropriate domain credentials.

• Problems with the data merge

  I created a file in excel with 966 lines all in column A. I have saved as a txt file and created an Indesign document with 966 pages.

  In the InDesign file, I put in place a text box with the font and size, I wanted then he centered in the document. When I do the merging of data in the master page shows only the text of row 2 in every single text box on each page.

  I tried searching and tried the other boxes and do not master pages. Why can't I get my text to display in the order in all pages?

  If I send someone with screenshots or call someone for a step by step which would be very useful.

  Thank you

  Peter

  Line 2 is selected, because the first row should be used as a header that describes the content.

  With regard to the merger itself, you have no need create a 966-page document. Create a document 1 page with your domain in place, and then perform the merge. InD will create automatically 966 pages, or as many as it takes to use all the data. If you want all in the same document, I wouldn't put the merge field in the master page, but on the page of the document instead.

• Problems with the auto-completion pop-up, flashing on

  I just upgraded to 18.0.1 on my Windows 7 64-bit OS. When I start typing in something in an entry box or the address bar the pop-up window that appears to show me what I typed in the past (I'm the appellant autocomplete popup) glitters in the market. It happens for a split second, then disappears, but the shadow around the area there. It flashes during a split second when I use my arrows or the mouse to move through the list, but I don't know what I choose. It's almost as if it times out, but the shadow around the box is running.

  Any whey ideas what is happening.

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/

• problem with the auto-login View 5

  Hello

  We built our environment to a field of development, but all users and workstations VM are in production (don't ask, it's a weird situation). Connect to the customer to see the development of creds, but then get rejected cuts in work stations, because it is in the area of production, but the view is from the dev creds. Is there anyway to not pass your credentials to 'View' in the virtual machine, and allow you to choose a name/password / domain?

  Thank you!

  If I'm not mistaken there is a GPO that will allow you to disable the SSO on.   You can find the GPO of the view on the broker of conection under C:\program VMware view\server\extra\group policy files.

• Problems with the movement of the front and back layers

  Hey everybody!

  I am very new to Flash, very very new to actionscript and basically, I started programming in general 2 days ago, and I have a problem with the layers in a project. I tried learning through books, but especially thanks to youtube tutorials, but I'm stuck here.

  Here is the .swf file: http://dl.dropbox.com/u/14319641/Flashprojekte/Variuscard%20Headertest.swf

  And here is the original .fla file: http://dl.dropbox.com/u/14319641/Flashprojekte/Variuscard%20Headertest.fla

  Two problems:

  1. I want maps to fly BEHIND the Logo, but in front of the shadow - so that it seems that the logo is original and the rest (maps and shadow) is in the back. I have 3 layers (Logo, Action, shadow), but no matter how to move around it do not go to the back...

  2. I would like to have a second fountain Let's say right left... can I just copy and paste the code? Seems similar is not...

  Can someone help me on this one? Pleeeeez ?

  Mike

  To create an empty movieclip you just select Insert-> new symbol and select movieclip and click OK.  Simply exit the editing for this movieclip mode by selecting Edit-> Edit the Document.  You now have a new empty movieclip in your library.

  With the desired layer selected, drag an instance of the movieclip in the library in the upper left corner of the stage and then give it an instance name of "mc" in the properties panel.

  I have no CS5.5, so I don't know if what I described in selecting is changed in the new design.

• Problem with the levels in PSE7 adjustment layer

  Hello

  I have a problem with the levels adjustment layer in PSE 7.0. I made this photo that shows exactly as I want it in PSD format, but when I save it in JPG format all adjustment layers are lost. I tried to get the same result by using simple Enhance > > adjustments > > levels, but I cannot get the same result with the same settings as with the adjustment layer.

  How can I solve this?

  I saw in a tutorial that might help add a new layer above the layer of setting and then merge visible layers, but it does not work either.

  I hope someone can help me if I can complete the picture.

  It seems that the problem is that your image size is big enough in comparison to the size of your available screen and you make your settings at roughly 18% view.

  Photoshop elements uses interpolation to show the images on the screen, so you can't really see exactly the result unless you view an image at 100% display (actual pixels)

  If you try to do the steps from the beginning with your image at 100% view, does make a difference?

  (Double-click on the Zoom tool in the Toolbox for 100% view (actual pixels))

• Problem with the scene selection menu

  I have two pages of scene selection menu.  The first page works fine but I have problems with the second page.  The highlite flashes market either on stage or on the main menu or on the arrow to return to the previous page.  So that he can move or do anything, the only way is to click on it when it flashes on.

  Is it possible to add buttons so I can have all my selections on 1 page?

  Yes. As Ann says you can do in Photoshop. As she points out, carefully study the structure of the layer of one of the Menus library. The small symbols at the beginning of the names of the layers are very important. Also, explore the different layers in the button layer sets. They have too specialized for naming conventions that must be followed and don't forget to turn off the visibility for any layer to highlight (highlight the secondary image button). It will be lit, when your user has access to this button.

  Also, is there a limit to how many buttons can have on a Menu by the DVD specifications. IIRC, it's 32 for 4:3 Menus and 16 for 16:9 Menus. Not sure if these exact limits apply to Menus of comics, but we are talking about DVD-video here and not comics.

  In addition, when you look at the Menu. PSD in Photoshop, special attention to the order button layer sets. Button #1 will be at the bottom of the Palette layers with button #2 above and so on. He also established the button routing, which is what happens when you press the arrow keys on a remote DVD player.

  In, you can edit routing button to do what you want. I think the button routing is only automatic in PrPro. You can check this. Unfortunately, I used PrPro to authoring only rarely and still dependent on the Auto-Play everything but simple DVD-Videos.

  Good luck

  Hunt

• Satellite C40D-C - problems with the system

  I recently bought an a toshiba satellite C40D-C Series notebook PC as my old satellite - essentially - is dying. After you connect to the internet, I tried to download AVG Antivirus on my computer that I don't have - and never - trust McAfee anti-virus that comes with the computer. Every time downloaded AVG then restart my computer, the computer goes directly into the automatic repair system and doesn't let me do anything but to reset or restore. This has happened even with completely removed McAfee. I've been on AVG directly today (January 15), and they have to do remote set-up for me - with the same results. Yes, I'm aware that McAfee is a selfish cry of a system and refuses to acknowledge any other antivirus, but that this issue happens even with completely removed McAfee shows clearly that it is something that Toshiba has worked in the system. I can't even disable the automatic repair tool. I have to be stuck with a McAfee antivirus which, moreover, does not yet or is Toshiba will make an effort to help solve a problem they caused?

  Why this computer isn't allowing AVG Antivirus work? And why, after each attempt to download AVG, the computer goes to auto repair whenever I shut down or restart? Is this a problem with the system or something, Toshiba has done on purpose?

• OfficeJet Pro 6830: There is a problem with the printhead

  There is a problem with the print head.  Or can not find the print head

  This problem just started happening. Everything was ok after replacing the cartridges of printers with HP cartrighes for this printer, printed since the replacement of cartridges.  I followed the instructions given by your troubleshooting solutions.

  turned off and unplugged, removed and replace the cartridges back in, printed on a sheet of paper indicating that the print head was aligned, printed what he needed at the time and now does it again.  I repeated the above instructions and it just keeps saying the same thing.

  Open the link: www.hp.com/contacthp/
  Enter your product number or select Auto detection
  Scroll up to "still need help? Fill out the form to select your contact options.
  Scroll down and click on: contact HP options - click Get phone number
  A file number and phone number will be displayed.

• Problem with the microsoft lifecam vx-5000 appication on my windows xp 32-bit

  I recently bought the lifecam vx-5000 and installed the software from the cd provided in the box. The webcam application fails and cannot open. It says that an error has occurred and must be closed. Also, the webcam is not detectable by Skype. I've download the latest version of the software (for my windows xp 32-bit) on the site but the problem still exists. What's not?

  Hello

  Looks like the camera might have a hardware problem or something running is interfering with
  the software and drivers.

  LifeCam VX-5000 - 3 year warranty
  http://www.Microsoft.com/hardware/digitalcommunication/ProductDetails.aspx?pid=014&active_tab=systemRequirements

  Microsoft Hardware warranties
  http://www.Microsoft.com/hardware/warranties.mspx

  Support for WebCam
  http://www.Microsoft.com/hardware/digitalcommunication/support/default.mspx
  and
  http://www.Microsoft.com/hardware/en-us/support

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ===========

  Also check with Skype and Forums support for known issues with their programs.

  Skype - Support
  https://support.Skype.com/en-us/

  Skype - Forums
  http://Forum.Skype.com/

  ==============================================================

  Use the startup clean and other methods to try to determine the cause of and eliminate problems.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Problems with the update 12/05/09

  I tried several times to install the following updates downloaded by auto update 5/12
  Update of security for Microsoft PowerPoint 2007 (KB957789)
  Update for Microsoft Office System 2007 (KB967642)

  Dungeon updates not only give me an error code 8007066F Windows Update encountered an unknown error. I don't know when I search this error code. Should I try a different approach to the update? I am running Windows Vista Ultimate 32 bit.

  After beating my head against the wall for several hours (days) research and try a lot of different things I contacted the support of Microsoft Office. While there was time, their Tech Support solved the problem that apparently was having problems with the installation of Microsoft Office that would not allow updating. The solution required unistalling all the Office applications, doing some cleaning and then reinstall Office. Once this was done the updates installed successfully, like Service Pack 2. It was required a research engineer - it was way beyond my abilities. I am pleased to say that the problem is solved and I can't stress enough how much I care I just started with this option and saved manny, many hours of time and frustration. Experience with the support person, that I have had - spread over some time - has been remarkable. You save time and headaches - if you find any information on your error code get help from M/S even if you have to pay for it. If your time is worthless as it's well worth.

• Problem with the game on XP XP3

  I ran into this problem on my XP computer. I know, I know. Old school freak who has not made a change for Vista... closing. In any case, I'm having a problem with the compatibility of the SP3 with a SP2 game, otherwise known as Grand Theft Auto San Andreas. I have more demands. I have a lot of space. The problem occurs when going from open screen of editing on the menu screen. It gives me an error. I have established this as a SP3 problem and would really like to know if there is a way back, or using a compatibility mode to use the program as SP2 without installing SP3. If there is a patch for SP3, which corrects compatibility issues, which work as well!

  Thanks for your time, the peoples of Vista!

  Valen

  Hello Valen Celcia,

  Thank you for using the Microsoft answers Forum.

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows XP and would be better suited to the Windows XP community. Please visit the link below to find a community that will provide the support you want.
  http://www.Microsoft.com/windowsxp/expertzone/default.mspx

  Judd
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Player version 11.0.6001.7010 with Vista. Problems with the automatic synchronization of music backup

  Windows Media Player version 11.0.6001.7010 with Vista. Problems with the automatic synchronization of music backup.

  Backup not working in all of these songs/albums that appear also in personal playlists. Does not account for all of the media/music in Windows Media Player. It is also not known where there are additional tracks from the same album, appearing in a personal reading list, these additional tracks (that is, it will take 2 album, but ignore the other 10). Has only begun to occur in 2-3 weeks.

  Previously, when I set up the sync partnership, there are options in playlists 'Sync' discovers the device Set Up, such as 'All music' 'All images' "5 * appreciation of music" etc. None of them showing now also available. Offered only my personal Playlists. All solutions?

  Hi Phil,

  Thanks for posting your question in the Microsoft Community forum. I understand that you can't auto sync in Windows Media Player. I'll help you with this problem.

  Before troubleshooting, provide us with information.

  1. don't you make changes to the computer before this problem?

  2. have you updated to Service Pack 2 installed?

  3. don't you make changes to the computer before this problem?

  This problem may occur if there is an inconsistency in the system files related to Windows Media Player. Follow these methods:

  Method 1.

  Solve problems in Windows Media Player: http://windows.microsoft.com/en-us/windows-vista/troubleshoot-problems-in-windows-media-player

  Method 2.

  Open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Click View all, and then click the Windows Media Player settings.

  Method 3.

  You can try to disable and enable the Media Player Control Panel.

  Steps to disable Media Player.

  (a) click the Start button, select Control Panel, click programs and then click turn on turn Windows features on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) to develop media features and uncheck the box next to Windows Media player. Click on ok and wait a few minutes to complete. Once this is done, restart the computer.

  Steps to activate the Media Player.

  (a) click the Start button, select Control Panel, click programs and then click turn on turn Windows features on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) to develop media features and check the box next to Windows Media player. Click on ok and wait a few minutes to complete. Once this is done, restart the computer.

  Method 4.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Security Scanner warning: there will be a loss of data through an analysis using the Microsoft safety scanner to remove any viruses found.

  Additional information.

  Set up a device to sync in Windows Media Player: http://windows.microsoft.com/en-US/windows-vista/Set-up-a-device-to-sync-in-Windows-Media-Player

  Windows Media Player sync: Frequently asked questions: http://windows.microsoft.com/en-us/windows-vista/windows-media-player-sync-frequently-asked-questions

  If you need help on this particular issue or any other related Windows issue, let know us and we will be happy to help you.