Problem with the creation of Flash Catalyst and Builder forms

Similar Questions

• problem with the creation of a folder and a file, read in the header and data

  I want to create a new folder named by time and then generate a file inside this folder txt: reads first header information and then reads the data, but the problem is that if there is this folder, the header appear in the file, if this folder is not existed, the header will not appear in the txt file.

  Thanks for your help.

  Hi Junniji,

  Check the attached vi. I did what Bob was trying to explain in the vi. I documented the steps described in the block diagram. Take a look. I had few comments on your code as well. Always try to connect the wires of the error when coding and try to keep the neat code so that its easy to debug and understand the flow (even if it's a test code ).

  A Subvi missing in vi who sent you there. I hope that you will have in your pc

  Kind regards
  Amine31

  (Give glory to good answers, mark it as a Solution If your problem has been solved )

• Problem with the creation of catalog upgrade to LR3

  Hello world

  Upgrade to LR3 tonight and I'm having a problem with the creation of the catalogue. I had 2 choices during the implementation and what I chose created a LR2-2 cat. I thought he was going to update my LR2 cat in a new Cat LR3 (as when I went to v1 to v2), but it didn't happen. I uninstalled and tried again, but is never given this choice to Setup again.

  So, how can I roll my current cat of LR2 in a new LR3 and use that to proceed? I have to do an export and merge?

  Thank you!

  This catalogue of LR2 - 2 is a copy of your old catalog, updated to the LR3 format. In other words, it's what you want.

  CTRL + O to open the catalogue and go ahead to use it.

• I have a problem with the drag (cursor snap) video and audio stuttering!

  I have an emachine windows vista home edition and have caused problems with the drag (cursor snap) video and audio stuttering.  my hardware configuration includes an HP printer and a video camera from Microsoft with pregnant beyond the keyboard, monitor, and system speakers routine.  Are there updates or the settings that I can apply to correct this problem?

  http://www.eMachines.com/support/drivers.html

  The latest drivers/software for your machine come directly from eMachines.

  Click the link above for them.

  See you soon.

  Mick Murphy - Microsoft partner

• Problems with the creation of chips of debugging SDK WebWorks of Blackberry10 2.0.0.71

  I had a problem with the creation of debugging tokens using the blackberry-debugtokenrequest command. It gives me an error saying that "java" is not a batch file or a program. The blackberry-debugtokenrequest batch file has the following text:

  @java - Djava.awt.headless = true-Xmx512M - cp ' % ~dp0\... \lib\EccpressoJDK15ECC.jar;%~dp0\... \lib\EccpressoAll.jar;%~dp0\... \lib\TrustpointAll.jar;%~dp0\... \lib\TrustpointJDK15.jar;%~dp0\... \lib\TrustpointProviders.jar;%~dp0\... \lib\BarPackager.jar;%~dp0\... \lib\BarSigner.jar;%~dp0\... \lib\KeyTool.jar;%~dp0\... \lib\DebugTokenRequest.jar ' net.rim.device.codesigning.debugtoken.DebugTokenRequest % *.

  I think that the culprit is the symbol @ before java, does anyone else have this problem? Is there a solution?

  What happens if at the command prompt just type "java-version" of your command prompt?

  If it does not, you must do one of two things.

  1. install Java v1.6 (32-bit only)

  2 Java is not in your PATH. (http://www.java.com/en/download/help/path.xml)

• Problems with the update of Flash Player.

  Problems with the update of Flash Player.

  After download, installation begins, but when the progress bar completes a typical Windows error message appears stating:

  (literal translation from Spanish):

  

  "can't find the procedure entry point SetDIIDirectoryW in the dinamic links library KERNELL32.dll.

  IHAVE: windows32, XP + FlashPlayer worm: 11.1.102.55 + MozilaFirefox10.0

  Flash works well, but I can't make a new update since Version: 11.1.102.55

  Please help me, thanks

  You have two options:

  • install SP2 & SP3
  • try if the Windows 2000 solution works: http://forums.adobe.com/thread/1012569

• Problem with the creation and display of intelligent insights

  I have a problem with the intelligent preview function. I use Lightroom 6.4 on Windows 10.

  • When I hit the "Original Photo" icon under the histogram in the develop Module, nothing happens: the remans icon exactly the same and no record Preview Smart is created in the catalog folder.
  • When I create a Smart overview in the library Module (library-> Previews-> generate Smart previews), a Preview Smart folder is created in the catalog folder, BUT , in the module development, l ' icon below the histogram says still 'Original Photo': it does not seem to recognize that a smart preview is available.

  Any idea?

  Rob.

  If everything works as you want, so you can leave the open Historgram.

• I have a problem with the previous results of LEDs and indicators of compensation

  I'm working on a proper VI for my building project, but there is a problem... The project here is to define the occurrence of the error and the error type to decide what actions are required to protect the circuit. This isn't a problem here...

  The problem is when I run the VI for the first time... Everything is good and I got what I need... But when I run it after that... The new results to come out with the results of the first round... So my problem is with the previous results of LEDs and indicators of compensation

  Hope my question is clear and not confusing

  Well, show us a code instead. How do you call the VI?

  Have you tried the option: "properties of the VI... run... clear the flags when called?

• Problems with the windows player video media and internet explorer?

  Original title: Windows Media Player

  I have Windows Media Player 11. I can't play the videos with her. Videos MSN don't is not at all and YouTube loading starts playing and closes exactly 11seconds every time regardless of what particular video. I recently updated my IE 8 browser and tried to use Microsoft Fix it Center Online. It has fixed some problems but not this problem. Any ideas out there? Thanx.

  Hello

  (1) windows operating system you are using?

  (2) have you made changes before the start of this issue?

  (3) what is the exact error message or error code?

  (4) what type of video file you try to play?

  (5) in difficulty he makes you run?

  Step 1: Search for the codecs

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  For reference:

  Solve problems in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-Player

  Resources for the resolution of problems in Windows Media Player

  http://support.Microsoft.com/kb/843509

  According to the problem with the playback of videos in Internet Explorer, try the steps in the following article

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

• Problem with the creation of variable names

  Hi, I have a problem with the following function:

  private function whichLevelToLoad (): void {}

  If (levelToLoad == "no") {}

  currentLevel = null;

  }

  var thisObj:Object = new Object();

  {if(levelBtnArray!=null)}

  for (var j: int = levelBtnArray.length - 1; j > = 0; j-) {}

  If (levelToLoad == String ("level" + (j + 1))) {}

  thisObj ["level" +(j+1)] = new ["Level" +(j+1)] (); - > The Problem

  thisObj ['level' + (j + 1)] .x = 0;

  thisObj ['level' + (j + 1)] there = 0;

  addChildAt (thisObj ["level" + (j + 1)], 0);

  currentLevel = thisObj ['level' + (j + 1)];

  }

  }

  }

  }

  I am trying to instatiate 75 objects by using a loop. The line should look like this "thisObj.level1 = new Level1(); with the numbers from 1 to 75. Is this possible? How

  can I do it?

  Thank you...

  getDefinitionByName solves this problem.

  Example of

• Problem with the creation and application of models

  For somrthing that seems so simple, I'm having a problem to create and apply a template to a page only.

  First, I created a template as follows:

  1. display a full page (index.html)

  2 choose an editable region by highting the content area of the page. This excluded the header, the menu high horozontal, right bar and footer.

  3. went to 'INSERT'-> model-> editable objects

  4 name of container box editable and click on OK

  5. FILE - > save all

  The purple line was shown around the editable and the tag is displayed in the upper left corner of the combo box.

  I assumed that the combo box has successfully been created.

  Then, I tried to apply the model to a new page by using the following steps:

  1 has opened a new blank page called about.html

  2. went to: EDIT-> model-> apply the page model

  3. selection of the Model dialog box displays and I chose the region to editible (1 illustrated)

  

  4. After selecting the editable area, this displsays error:

  

  Error message reads as follows:

  Some Uea this document have no corresponding regions in the new document

  I tried several times, but I know I have to do something by mistake.

  Can someone help me in learning this task properly. Models seem to be such a powerful thing to use in development with DW.

  Thank you in advance.

  boblan1042

  Try this method:

  * FILE | New > template Page > select model > Create.

  A step by step method that works every time.  Once you familiarize yourself with the help of models, come back and I'll tell you why you receive the path you showed above.

• Problem with the creation of New and subfolders only appear is not in the list

  Thunderbird is allowing the creation of some New & subfolders, but they aren't always in the list each time.

  Photo shows the current list, but they tried to get money records IMarEST & Bank. (My apologies for Hypersnap stamps)
  Sorry, but the photo is not download!

  I use the Windows x 86 Version 8.1 - Thunderbird 31.6.0

  How to subscribe to see the imap folders:

  • Right click on your email account name, and then select 'subscribe '.
  • IMAP folders available on the server will be listed.
  • Select the ones you want to add to your e-mail client
  • Click the button to subscribe.
  • Press the OK button

• Strange problems with the most recent Flash player 18.0.0.232

  I posted these questions to Support Flash Player

  My first question was

  Where can I find the solution on your Flash player and Mozilla Firefox / Chrome (windows 7) that does not read the videos always out there?

  There is a conflict with firefox/chrome with your new version.

  More information

  I did everything what Firefox told me to do but the problem is bigger, because I told you that I have the problem also in Chrome.

  I did a clean install and was also the driver carried Flash as your adobe page told me to do.

  I installed again after that Firefox and the Flash plugin.

  The only security I have on my computer is the last free version of Avast (150909-0)

  Unfortunately, the problem is still there and it's the reason why I asked you what else to do.
  Adobe FB, I received this response: Adobe Flash Hi John, post your query on the forum of Flash Player.
  

  
  
  

  UPDATE

  I did the update Avast even on another computer, and yes the conflict comes from AVAST.

  Also on this computer under win 7, videos no longer work!

• Problems with the creation of PDFs in Acrobat Pro 11

  We are going to have problems with shared PDF files created in Acrobat Pro 11.0.11 or above.

  When some users to create shared PDF files and send for shared review, they can be considered as shared PDF in Acrobat Pro (yellow bar appears, with shared PDF functions), but not in Adobe Reader 11.0.11 or higher (without shared review menu bar appears, can't we seem to view manually).

  Anyone know what could be the problem? It's only for PDF files created by some users, another shared review, a PDF file created with Acrobat Pro 11.0.11 or superior open fine in drive 11.0.11 or above. I think maybe it's a setting that is not correct for some users...

  Thank you!!

  -Paul Masalsky

  McAfee (which is now part of the security of Intel)

  Hi paulm85910772,

  Please see this KB document for the creation of a shared review Acrobat help. Starting a PDF review. On the other end uses can participate in a shared review using Adobe Reader help of Acrobat Reader | Share, comment and review from.

  Try the most recent Adobe Acrobat Reader DC Adobe - Adobe Acrobat Reader DC Distribution.

  Let me know how it goes.

  Kind regards

  Nicos

• Problems with the Vector container flash.geometry.Points class

  to import flash.geom.Point;

  
  Hello!
  
  I'm writing a game using the new Vector class.  Then vector consist of flash.geom.Point (s).
  
  However, when I try to use the concat function to return another vector with a series of Points at the end of the vector, I'll get:
  
  TypeError: Error #1034: Type coercion failed: cannot convert flash.geom::Point@bce8901 to __AS3__.vec. Vector. <>*.
  to the vector. <>* $/ castToThisType()
  
  Action script says I'm trying to convert a vector to a vector.  I don't see how this is the case.
  
  In the example below, I said adjoiningPoints be:
  var adjoiningPoints:Vector. < Item >;

  When I call
  Path.Concat (myNextPoint);
  
  I get the above error.  To remedy the problem, added the extra lines, declaring "iAPath."  When I work with berries, everything works fine. The sets are completely filled with points and there is no error.

  Can anyone help

  
  public void getConnectingPath (pArray:Array): vector. < Point >
  This function returns a vector of points which consist of the vertices of a path that will be
  Plug the current "PollyG", in another array of cancers (Philippe), using the shortest path.
  {
  
  var path: vector. < Item >;
  var adjoiningPoints:Vector. < Item >;
  var wPath:Vector. < Item >;
  var pathsCue: as = new que();
  var endFound:Boolean = false;
  
  var aPath:Array
  
  path = new Vector. < Point > ();
  aPath = new Array();
  
  aPath.unshift (pathList [pathList.length - 1]);
  Path.unshift (pathList [pathList.length - 1]) ;// add the starting point;
  adjoiningPoints = getConnectingVertexes (Philippe, pathList [pathList.length - 1]);
  for (var i = adjoiningPoints.length - 1; i > = 0; i--)
  {
  var iPath:Vector. < Item >;  individual path.
  var iAPath:Array
  var myNextPoint:Point;
  
  myNextPoint = adjoiningPoints [i];
  
  iAPath = aPath.concat (myNextPoint);
  Path.Concat (myNextPoint);
  iPath = path.concat (myNextPoint);
  pathsCue.addItem (iPath);
  
  }
  }

  Thank you
  
  

  You cannot use concat with other types of data. That's what indicates the error. myNextPoint is the Point and concat() expects array (vector).

  While the docs of vector is not an example, Array is managed in the same way, so this is where they show how to use concat() for table:

  http://www.Adobe.com/LiveDocs/Flash/9.0/ActionScriptLangRefV3/array.html#concat ()