Problems with the Vector container flash.geometry.Points class

Similar Questions

• Problems with the update of Flash Player.

  Problems with the update of Flash Player.

  After download, installation begins, but when the progress bar completes a typical Windows error message appears stating:

  (literal translation from Spanish):

  

  "can't find the procedure entry point SetDIIDirectoryW in the dinamic links library KERNELL32.dll.

  IHAVE: windows32, XP + FlashPlayer worm: 11.1.102.55 + MozilaFirefox10.0

  Flash works well, but I can't make a new update since Version: 11.1.102.55

  Please help me, thanks

  You have two options:

  • install SP2 & SP3
  • try if the Windows 2000 solution works: http://forums.adobe.com/thread/1012569

• Strange problems with the most recent Flash player 18.0.0.232

  I posted these questions to Support Flash Player

  My first question was

  Where can I find the solution on your Flash player and Mozilla Firefox / Chrome (windows 7) that does not read the videos always out there?

  There is a conflict with firefox/chrome with your new version.

  More information

  I did everything what Firefox told me to do but the problem is bigger, because I told you that I have the problem also in Chrome.

  I did a clean install and was also the driver carried Flash as your adobe page told me to do.

  I installed again after that Firefox and the Flash plugin.

  The only security I have on my computer is the last free version of Avast (150909-0)

  Unfortunately, the problem is still there and it's the reason why I asked you what else to do.
  Adobe FB, I received this response: Adobe Flash Hi John, post your query on the forum of Flash Player.
  

  
  
  

  UPDATE

  I did the update Avast even on another computer, and yes the conflict comes from AVAST.

  Also on this computer under win 7, videos no longer work!

• Problems with the help of Flash output

  Hello there, hoping to get some tips on a few topics with RoboHelp.
  
  We just started deployment FlashHelp here and have met a couple of snags. I use RoboHelp version 6, the version of Flash player 9 and have the Flash authoring software (if necessary), but this is the MX 2004 version. We need IE 6 and Windows XP Pro.
  
  Question 1
  
  In a project of FlashHelp (generated), when, on the Index tab, if I use the search box to find a word index, shows the following error: "a script in this movie is causing Adobe Flash Player 9 to run slowly." If it continues to run, your computer may become unresponsive. You want to stop the script? "If I DO NOT give up the script, the computer is still slow. If I said to go there and to abort the script, Internet Explorer crashes.
  
  I asked our in-house web team and the Flash development team to examine the issue of the index, and they discovered something strange. The index is broken only if the index entered word begins with the letter has that ever happened to someone else? We tried several projects on multiple boxes (computers), and the results have been very inconsistent. Sometimes it breaks, sometimes not, but ONLY when the index entry starts with an A.
  
  Is there something I can change in the code anywhere to prevent that from happening in the first place? Alternatively, is it possible to change the skin to completely remove this entry from the index? It is not necessary to our process to have him there, as long as the index entries are there with the scroll bar.
  
  Note: We just use the default Flash skin - no changes.
  
  Question 2
  
  One of my latest projects to help is contextual. When called in the application (F1) displays the appropriate heading. However, the table of contents displays always the default book - it develops not to correspond to where the user is really help.
  
  Even more strange (for me), the table of contents works very well for the pages and books of first level and second level. However, something third-level or deeper, the table of contents is behavior as described above - the book of the default home page.
  
  All books are books with links (topics), so what matters. Also, I tried to build the project as WebHelp and had the same results - the table of contents still would not automatically fill when it is called csh of the application.
  
  In all other respects, things seem to work very well.
  
  I downloaded the trial version of RoboHelp 7 and had the same problems.
  
  Thank you very much!

  Wow, Mr. Grainge, you saved my sanity! Thank you!

  I put in the bug for the Index number report, and your proposal in extracts for optimization PC Local from the Internet seems to have fixed the TOC problem as well!

  Thank you very much!!!

• Problem with the installation of Flash Player

  I tried to install Flash Player for IE 8 on Vista (32 bit), but whenever I tried to install it, it says "the version of Adobe Flash Player ActiveX that you are trying to install is not the latest version". I did the two ond online offline. I really need help on this one

  To uninstall Flash Player 10.1 beta (installed as part of the CS5), you must download the uninstall program 10.1 of http://labs.adobe.com/downloads/flashplayer10.html#uninstallers, then run it with the -force option, such as documented in the Release Notes.

• problem with the vector

  Hello

  I write code for getting value of the vector and store in an array of strings.

  but when I convert it to a string, it shows me classcastException.

  so please help me to solve it.

  Code:

  String [] items = new String [data7.size ()];
  System.out.println ("size =" + data7. Size());
  While (f<>
  {
   
  elem [f] = (String) data7. ElementAt (f);
                          
  System.out.println("Data="+elem[f]);
                         
  ++ f ;
  }

  Note: here donnee7 is a vector.

  Gets the collection of data, to edit and store again

• I have a problem with the installation of flash player on my PC?

  When flash player software download reached 47 percent, he is rejected then how can I fix yhis?

  How you are trying to install, in the browser, or download and save and then run the saved file?

  You have no Flash version installed for the moment? (Look into are all Adobe Flash players listed?)

  Also, what site you download it go?

  Test flash here - https://www.adobe.com/software/flash/about/ , you should see an animation if its operation and a small text box showing you the version you have, a larger box below will show you the latest version (s).

  Download from the "player Download Center" - http://get.adobe.com/flashplayer/ visiting in the browser that you want flash installed. Uncheck the gift if you do not want.

  Or you can specify which version you want to get out of here - http://get.adobe.com/flashplayer/otherversions/

  If you use IE, you need the ActiveX version, if you use Firefox/Opera etc, you need the version of the Plugin.

  If you still cannot install it, run the Adobe's Flash removal tool to your version, restart and then try to install the last Flash once more.

• Problem with the combination of LabVIEW (dynamic distribution) classes, statechart module and module FPGA

  LOCATION:

  -I am developing a software plugin based on plug-ins based on LabVIEW classes that are instantiated in running. Plugin real classes come from the plug in generic classes that define interfaces to the VI instantiation and can provide basic functionality. This means that many of the methods of the class are dynamic distribution and even methods of child classes can call the parent method.

  -Plugins top level (the ones directly accessible by the main VI) each have a run method that animates a plug-in specific state transitions.

  -Transitions of the plug-in data acquisition (DAQ class) class calls a method of the DAQ class that reads data from an FPGA card OR and transmits to another component via a queue.

  PROBLEM:

  -Higher sampling rate, a FPGA-to-host FIFO overflow occurs after some time. When I "weigh" the system just by moving a window of Firefox browser on the screen, the overflow is triggered immediately. I did not have this kind of problem in older software, where I was also reading a FIFO of FPGA, but made no use of LabVIEW classes or diagrams.

  SOLUTIONS I'VE TRIED (WITHOUT SUCCESS):

  -J' put the transitions in a timed (instead of a simple while loop) loop that I assigned specifically to an own kernel (I have a quad-core processor), while I left all the other loops of my app (there many of them) in any simple loops. FIFO overflow still occurs, however.

  QUESTION:

  -Does anyone have a tip how I could fix this problem? What could be the cause: dynamic distribution methods, the acquisition of data of state transitions or just the fact that I have a large number of loops? However, I cannot change the fact that I have dynamic distribution methods because it is the essence of my architecture...

  Tips are greatly appreciated!

  I've now changed the execution priority of all the screws involved in reading of the FPGA FIFO '(highest) priority critical time '. This seems to be improving the situation much: so far I have not a FIFO overflow, even when I move around the windows on the screen. I hope it stays like that...

• BlackBerry Smartphones Blackberry Curve 9300 3: Problem with the camera without flash and don't take pictures

  Hello!

  I have a Blackberry Curve 9300 3 phone. Until recently my camera was working fine that is the camera takes pictures. But recently I can't take pictures. I can access the camera screen I can zoom in I can see old photos but when I click on the camera icon to take a photo there is no flash and no picture is taken (as a video of tmy note side works fine)

  Any ideas of what can be the problem? Also is it a good idea to remove the battery to fix the problem and if I did so will alll my similar memos, contacts etc. be erased?

  Thank you very much!

  removing the battery may fix some glitches on the phone but it clear files from the DOE.

• Problems with the creative Cloud/Flash Professional? (Run system restore, Flash has been deleted...)

  I did a system restore to restore my computer as it was 24 hours ago to solve PC problems (could not uninstall some programs that I was going to reinstall to resolve performance issues); I have three other my computer Adobe programs that are still there, but where the Flash was my latest acquisition, it was deleted when I performed the system restore. When I tried to re - download the program, CC still consider that Flash is still on my computer. I uninstalled and reinstalled CC, passed through the program files for traces of Flash (do not delete or change this either, but also did not find everything related to Flash), deleted the Temp folder, tried to download Flash Professional CC directly on the CC site, but none of them brought no change. Is there a way to manually download Flash, or "reset" CC to get the opinion of that Flash is no longer on my computer?

  Run the cleanup tool and try again:

  http://www.Adobe.com/support/contact/cscleanertool.html

  Mylenium

• Problem with the display of Flash

  Hello people. I was wondering if someone could help me. I have a real simple photo Flash drop on my pages on this site. I have about 6 total number of pages and only 5 pages show the flash and the other, that it does not appear after that I added 2 more pictures of her. All export parameters are the same, I change just the size in the HTML doc? I was wondering if someone could help. It does in Firefox and explore. It's probably something small, that miss me.
  
  I tried to throw another index page of one of the other links (or categories) and that does not work either, it is not like commercial page? Here's the code, which as I said it looks like all the other pages, and I have the .swf file in the right place. Thank you
  
  Homepage
  
  Page where the flash does not work
  
  

  Try to publish the swf file in a different directory and with another
  name to see if it works.

  Henri
  http://www.kitmap.fr

  "HmFireball" wrote in message news:
  fik40n$I94$1@forums. Macromedia.com...
  > Did you delete my e-mail with attached files?
  > I have not here at my place of work.
  > If you don't have them, I'll send them back to you as soon as
  > I am
  > at home.
  > Thank you :-) pending
  >
  > Henri
  > http://www.kitmap.fr
  >
  > "tapupartforpres" wrote in message of
  > News: [email protected]...
  > No I did not use these files directly. I tried to pass by the
  > process
  > because I'll have to make changes to the other files as well. Maybe if you
  > want to
  > email them again, I will try. It's weird because all the other flash
  > files in
  > directory of other work, and cela used to work? Then I try these
  > files
  > working in other directories in this directory, and they do not work
  > either.
  > Maybe I should call go Daddy? What do you think? Do you know of
  > Directory
  > questions like that, I never heard about something like that? I will try
  > to
  > Download your files again. You still have my email? Thank you I really
  > apprecite it.
  >>
  >
  >

• Problems with the Plugin Container after upgrade to firefox 3.6.4

  I upgraded to Firefox 3.6.4 and when I opened the browser window here: Plugin Container for Firefox stopped in progress.
  If I close that window, the firefox closes immediately, if I don't close, can I use it on several sites but not all! How would I solve this container plugin thing?

  Operating system

  Vista Windows

  
  

• Problems with the download of flash professional free trial

  I am trying to download the trial version of Flash Professional. I get a screen that says it's loading but nothing seems to happen. Will I be impatient or should he do something else

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

• Problem with the installation of Flash CS6

  I have this error:

  Exit code: 6

  Please see the faults and warnings below for troubleshooting. For example, ERROR: DF050, DW063... WARNING: DF029...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 4 (s), 1 WARNING (s)

  -Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} standard Adobe 2.0 2.0.0.0.

  ERROR: DF050: ARKServiceControl::ModifyService failed for the standard service. Error 1072 O Serviço especificado faith marcado para ser excluido. (6 Seq)

  ERROR: DW063: ARKServiceControlCommand of command failed. (6 Seq)

  ERROR: DF059: ARKServiceControl::StartService could not start the service standard. Error: 1058 (Seq 1)

  WARNING: DF029: ARKServiceControl::StartService: standard Service not started or stopped. Current status: 1 output Code: 1077 Service specific exit Code: 0 (Seq 1)

  ERROR: DW050: the following payload errors were found during the installation:

  ERROR: DW050:-standard Adobe 2.0: installation failed

  -------------------------------------------------------------------------------------

  What can I do?

  Thanks in advance.

  Hi hbgarcia,

  Please follow the steps mentioned in the KB: http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html and try to install the software.

  Kind regards

  Romit Sinha

• Problem with the creation of Flash Catalyst and Builder forms

  I am trying to build a Web page that has a form for a contact method - I want to get this working before you publish the site. I order to create the form, I was directed to this site: http://www.numencommunications.com/building-a-simple-form/

  While all the steps went well spent, I chose 'Export release build' at the end of the tutorial. I had followed all the steps exactly as written on three occasions. Each time, warning popped up saying this: "the prefix 'mx' for the 'mx:HTTPService' element is not related."
  What can I do to correct that I would desperately like to have a form on my site and may not be able to publish on the web until this form work?

  
  

  Thank you very much for your help! I appreciate any suggestions.

  Give the button an onClick attribute. To do that you can go to design mode, click the button and use the form in the menu on the right. In this case you'd be using "emailService.send ();" as the onclick attribute, or whatever id you gave to the httpservice.

  Hope that helps!