Problem with the function of calculation does not

Similar Questions

• problem with the ios certificate server does not update the CRL

  Hi all

  The background is that I'm putting a DMVPN solution with tunnels ipsec between the rays created by using certificates.

  I use a cisco 877 as the CA server (its 12.4 (6) T5) running to provide certificates for the spoke routers. This part works very well - rays can apply for a certificate and get a number very well.

  The problem is CA, life of LCR is set to 24 hours, but the CA is not updated the LCR so when the rays see CRL (as defined in their trustpoint) they point to a mistake that the CRL is obsolete and does not connect.

  If making a ' #sh cryptographic pki server ' it lists a ' CRL NextUpdate timer. It has a timestamp that is 24 hours after the last certificate was revocked. The only way I can get the LCR to be rebuilt must revoke a certificate.

  So, my question is, am I missing something here? I thought that it would automatically generations a new CRL list file every 24 hours.

  Can anyone help?

  Thank you.

  Hey Marc (?)

  This seems to correspond to this bug:

  CSCsy95838    AC IOS: LCR of the not updated, update timer not started

  However, it does not mention if 12.4 (6) T5 is affected, only that it was found 12.4 (15) T3 and resolved to 12.4 (15) T10 and other more recent versions.

  I suggest trying the last 12.4 (15) Tx, 15.0 (1) Mx or 15.1 (4) Mx version if you can.

  I assumed that you have much of it, but just in case: as a workaround, you can disable CRL checking on all routers DMVPN, of course they will still allow connections from routers with a revoked RADIUS.

  As (temporary?) substitute for a Revocation list, you can use a 'certificate ACL' with which you can create kind of a 'local CRL Manual:

    crypto pki certificate map certACL 10    serial-number ne    serial-number ne    etc. 

    crypto pki trustpoint myTP

     match certificate certACL
  
      (note the "ne" stands for "not equal" so you are permitting any certificate whose serial number is not listed) 

  Of course, you would have to configure (and maintain!) participating on each router in the DMVPN so it's heavy, but I guess if you revoke often certs, that it might be an option.
  HTH
  Herbert

  --

  If this post answered your question, please click the button of "right answer".

• How to solve my problem with the microphone?-it does not work normally (his jerky) after application of the reductions of noise/restrictions

  Hi il. I recently installed Adobe Audition7.2 on my windows 8.1 and I noticed the button sound recording from the microphone inside the program is disabled while at the same time, I could record using other programs on my windows. I worked with my AU and eliminate the background of an old audio recorded sample. ((mon micro intégré est donc bruyant) noise) I chose a very noisy place and crossed the effect / noise noise reduction of the restrictions/print capture. And then I went through effect / restrictions/noise reduction noise reduction process and apply the settings. Although it works and my sample file has improved (without noise), I encountered another problem, my mic does not work normally both in AU and other windows software. The recorded sound now go offshore and (rough) while recording. How can I solve the problem?

  I also followed the instructions on this link https://forums.adobe.com/thread/1546014?start=0 & tstart = 0 and installed ASIO4ALL... but this isn't work, the program may not work correctly for me.

  
  

  Thank you for your attention.

  If your microphone is sounding restless that you save (rather), there is problem on your Windows sound settings. As Steve G suggested it sounds like a form of blocking to reduce the noise. I don't know if this is an effect that Windows 8.1 can do to the incoming audio signal. If you find a way to turn it off.

• I have a problem with the CD/DVD-rom does not.

  Original title: CD-ROM/DVD-ROM and drivers

  Hello

  My DVD Samsung writer stopped working.  The model (SH-222) is a plug-and-play using CD-ROM/DVD-ROM drivers of the window.
  -cdrom.sys version 6.1.7600.16385 (win7 - rtm.090713 - 1255) in the folder: Windows\system32\DRIVERS\ and.
  -GEARAspiWDM.sys version 2.02.03.00 in the folder: Windows\system32\drivers\.

  I get the following error in the configuration of properties of CD-Rom drive: "Windows cannot start this hardware device because its configuration (in the registry) information is incomplete or damage (Code 19).»  I tried the windows troubleshooting hardware request without success.  I even swapped the the DVD burner with a new model of Samsung (SH-224) with the same results.

  I cleaned my registry using the "download free CCleaner.  I have a knowledge base of the obligation to register, but not enough to run an editor from the registry on the registry file itself.

  What are my options?

  Mario

  I cleaned my registry using the "download free CCleaner.  I have a knowledge base of the obligation to register, but not enough to run an editor from the registry on the registry file itself.

  http://support.Microsoft.com/kb/982116/en-us

  Your registry may be damaged. (Code 19)

  This problem occurred after cleaned your registry using "CCleaner database"? If so, then when running CCLeaner you would have the option to backup the registry keys. If you did, perhaps restore the backup keys. If not, read the article above (do not rely on the fixit).

• Problem with the latest patch, Mozilla does not fit on 1024 * 768

  Today (13/07/04) once the patch of Mozilla, the display of the Explorer to expand. I use 1024 * 768 on desktop. Now I have to scroll sideways to see the full page...
  Please solve this
  Thank you

  Yes, it wasn't a problem in earlier versions and the display size was independent of the settings of your system. However the arrival of high-resolution poster has necessitated that firefox now follows this convention, otherwise, it would be unreadably small on such systems...

  something you can try if you want to set the size/pixel density of the text in firefox is different from the settings in your system as it has been addressed in previous versions, enter on: config in the address bar of firefox (confirmed the message information where it appears) and search for the preference named layout.css.devPixelsPerPx. Double-click it and change its value to 1.0 (or any zoom factor that fits your needs: 1.0 corresponds to 100%, 0.8 is equal to 80% and so on;-1.0 is the default and will comply with the configuration of the system).

• Anyone else having problems with the payment information section does not load?

  Im trying to put in my payment information in and it will not appear. don't think its connection. I have tried everywhere

  Try a few steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

• Hello, I had a problem with my band. It does not really suppose he numbered scenes everything in order and he has so far in until I missed an and changed for the good order. But now when I go back to where I left and I have create a new scene

  Hello, I had a problem with my band. It does not really suppose he numbered scenes everything in order and he has so far in until I missed an and changed for the good order. But now when I go back to where I left and I have create a new scene number come up as * it and I need to change personally. is their any way I can change it to order normally?

  Hello

  You can manage this through the "Manage scene numbers" option in the menu 'Production '.

  There is a setting in this dialog box to assign scene numbers automatically to the new scenes.

• Kalonline-works until I get the anti-piracy icon so stop saying: there is a problem with the function of anti-hacking

  I play kalonline (RPG game), when to start the game it works up until I get the anti-piracy icon so stop saying: there is a problem with the function of anti-hacking. the program stops. I am the admin of it say kal computer run it in administrator mode and I did and I delete and reinstall the game. Solve the problem in win 7 by a right click and run as administrator, they wanted to work in win xp it all fits on how to solve this problem. These are the things, I was told to do to fix it.
  Hello

  It comes to KalOnline.

  Your error message can be corrected by following these steps:

  1. run KalOnline in Administrator Mode.

  2 uninstall KalOnline d_lete the entire Inixsoft folder, then reinstall the game.
  I did it and and it has not worked. then I was told that this was causing the problem

  Please check your computer system.

  This problem has occurred by a kind of problem of piracy.

  And if you have used a kind of memory-editing program, it could be happen too.

  So if your receipt similar to, then please remove it.
  I have none of these things on my computer. All I know is that people who have not updated windows xp can play the game and people who win 7 can play the game if they right click icon and run as administrator, that I still say side here but no way to prove it.

  Hello

  I suggest you to get in touch with the manufacturer of games and see if there are any other fix for this problem.

• How to solve a problem when the windows setup program does not open a program, says I need to install it. and an error message 1706

  How to solve a problem when the windows setup program does not open a program, says I need installation cd and a 1706 error message happens.

  Hi PAtwoodwu,

  1. what program are you trying to install?

  2. did you of recent changes on the computer?

  3 does happen with all programs?

  Check and make sure that the Windows service install is running on the computer.

  (a) click on start to reduce this includes this image, click run , type services.msc , and then press enter to open Services.

  (b) right click on the Windows Installer service and then click Properties.

  (c) if the box Startup type is set to Disabled, change it to Manual.

  (d) click on OK to close the Properties window.

  (e) right click on the Windows Installer service and then click Start. The service should start without errors.

  (f) click on the file menu, and then click exit.

• Microsoft Flight Simulator 2004 installation with the 4th vista disc does not work. What should I do?

  Microsoft Flight Simulator 2004 installation with the 4th vista disc does not work.  What should I do?

  Hello

  You get no matter what error code or error message?

  There seems to be a problem with the file missing in the rear disc system. I suggest you to refer to the following Microsoft article and check if it helps.

  Flight Simulator 2004: known video issues: http://support.microsoft.com/kb/823628

  If the steps in the Microsoft article mentioned above do not help, then it would be best to ask your question in the Microsoft Game support forum.

  Microsoft Flight Simulator Games Forum: http://www.fsinsider.com/

  Or contact support for Microsoft Flight Simulator game: http://www.microsoft.com/Products/Games/FSInsider/tips/Pages/default.aspx

  Hope the information is useful.

• Having the problem with the function on SG300 Dhcp / 500?

  Having the problem with the function on SG300 Dhcp / 500? now I can use the dhcp server on the two model, but have a problem.

  My problem is when I create

  VLAN 1: 192.168.0.1/24 dhcp pool 192.168.0.10 - 250

  VLAN 10: 192.168.10.10 - 250 192.168.10.1/24 dhcp pool

  case 1

  I plug the pc to vlan 1 can I get ip 192.168.0.11. But when I change this pc to a new port in vlan 2 I always get the same ip address. why I can not get IP of vlan2.

  case 1

  I plug the pc to vlan 2 I can get ip 192.168.10.11. But when I change this pc to a new port in the vlan 1 I always get the same ip address. why I can not get IP of vlan1.

  but when I have access to the switch and remove the link after that that i will get correct IP.

  I think this is the bug of this firmware. Could you help this case.

  This is a known bug that is the setting of Cisco

  Sent by Cisco Support technique iPad App

• I try to enter the serial number to register my software, but the label outside of the box, he's starting with the letters and it does not accept the letters... . Only numbers

  I try to enter the serial number to register my software, but the label outside of the box, he's starting with the letters and it does not accept the letters... . Only numbers

  Serial numbers contain no letters, so maybe it's your redemption code, for use on adobe.com to get your serial number.

  Here are a few links to look for more information

  https://helpx.Adobe.com/x-productkb/global/redemption-code-help.html#productboxorprepaidca rd

  Quickly find your serial number

• Hello! I have a problem with the Simulator for android is not work. What is the reason?

  Hello! I have a problem with the Simulator for android is not work. What is the reason?

  Depending on your mobilde device you must first unlock the developer settings in order to test the AIR apps on it.

  Where to find these settings depends on your specific device.

• Installation of the printer driver Officejet G85 fails with the message "print processor does not exist" with Windows 7

  The site compatibility Windows 7 says that this OS is compatible with my Officejet G85 all-in-one old.  Whenever I try to add this printer is using the automatic functions or manual installation of the driver fails and I get the error message that "print processor does not exist.  I tried to install the original with the most recent compatibility software is Windows 2000, but Windows 7 does not allow indicating that the program already exists and I have to uninstall it first.  However, I can't find it listed anywhere for uninstall it, and the original software disk does not have this feature either.  HP does not support printer and would not help provide.  This printer worked perfectly with Windows XP and we really like it is equipped.  Please help us raise this printer up and running with Windows 7 64 bit home edition.  I tried things I found that it was similar in the forum with no success so far.

  Hello

  You can run the printer troubleshooter. Convenience store solves some common printing problems.

  If your computer has problems printing, try using the printer Troubleshooter to solve the problem. He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  Reference:

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  See the following articles from Microsoft for more information on installing a printer or driver printer:

  Install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  If the problem persists, you can contact the manufacturer of the printer for more information.

  http://WWW8.HP.com/ca/en/support-drivers.html

  Hope this information helps.

• (Problem with the arrows) Adobe Reader is not working properly

  I have problem with the Adobe Reader plug-in. When I have a tab open with the pdf file, my arrows do not work in other tabs in firefox, only in this tab where it is the open pdf file. Also, I noticed that when you try to use the arrows in the other cards, they are working on a pdf file.

  I am tempted to uninstall and reinstall Adobe Reader, but it does not work. Help, please.

  I solved the problem reinstalling Firefox, because when I turned off Macromedia my pdf file still worked, but the arrows didn't always work. I think it was a problem with the plugin from adobe.