Problem with the huge movies.

Similar Questions

• Problem with the tool move? (Win 7)

  On Photoshop CS4, whenever I select the move tool and decide to move an object in a layer, it moves the object off the screen, making it difficult to bring the canvas to move. I know he's not jumping the layers, because only the object within a single layer, I moved, but I'm the only one who has this problem? How should I do?

  He has only this problem with the tool move, but with scrolling text, text tools tool and the Brush tool, as well. The text tool jump out of the screen and the marquee tool would position the tent somewhere else when I clicked on it to be the Brush tool sometimes jumped on the outline of the brush. Can anyone help?

  Market and stop over the years, I found that Photoshop itself could corrupt if used for a long time.  Or he might not.

  That's how (or if) it does seems to vary depending on other factors.  With some display drivers, for example, sometimes much more.  A particularly frustrating event is when Photoshop just stops where you try a file - save as.  Another, quite common, is that multiple instances of Community Help just start to open jerky.  But probably no matter much what look like symptoms; the source of the corruption, which has been expired for a long time.

  I don't think that it's just a problem, either, but probably several - at least a part of which are due to bugs in the drivers.  From time to time, we hear about specific versions of display drivers, for example, that have been seen to increase the likelihood of corruption.  And some, like ATI Catalyst 11.7 earlier this year, seem to minimize problems.

  What I don't know, because I don't use a Mac, is whether the same situation exists on this side of the fence.  In my heart of hearts, I suspect that it does.  Maybe it has to do with models of memory used under the covers.

  I * CAN * tell you that CS6 is not available yet.

  -Christmas

• Problem with the published parameters between the movement of FCPX

  Hello

  I have a little problem with the settings published between the movement at FCPX.

  For some reason, the published parameters have different values within FCPX in movement.

  For example, in motion, a parameter is - 187.04 and in FCPX is-0,19. What are the parameters of position for CSOS.

  If I try to change this setting in FCPX, the application crashes after 10 seconds or less.

  No idea what is causing the problem? I re-edited the effect several times, same result. The software that I use is FCPX 10.2.2 and 10.2 of the Motion.

  MOTION

  

  FINAL CUT X

  

  Thank you.

  The values that you have published on the move have been compared to this project that you created. The values shown in FCPX are "consistent" with any project that you create. Often, you will see the center screen is 0.5, 0.5. Left and below are 0, right and up are 1.0. Or you could see Center of 0.0 and a range between - 0.5 and 0.5. Sometimes, you will see the numbers on the scale of some sort of percentage (vertical values will be 0-100 [%] and the horizontal will be based on the aspect of the project, for example, horizontal will be between 0 and 177.7778 for a project of 1920 x 1080, etc..) It will depend on the type of object and the parameters associated with what you posted.

  If you want to "correct" values in FCPX, you will probably need to rig settings, otherwise, just live with it.

  For what is * why * your model crashes FCPX, that will be another reason and not the difference in the numbers. So, can we get more information on the model?

  To use specific fonts?

  You publish alterations settings?

  Anything out of the ordinary?

• Problem with the sync audio to video when you use Windows Movie Maker version 6.0

  I have a HP Slimline Pavillion S.3220.uk PC, using Windows Vista Edition Home Premium. I have problems with the audio video synchronization when using Windows Movie Maker, version 6.0, I 'get' raw AVCHD files to .wmv using voltaic HD.  I've noticed that the audio and video are out of sync, ONLY after the first thumbnail.  No indirect problem with videos, but when people talk to the camera, in case of DISASTER, as he is out of sync. I tried to reduce the resolution of 720 p and 540 p, and no solution to the problem. Any thoughts on the matter please?

  Hi Fabian119,

  Today, there are hundreds of audio and video codecs in use. Some were created by Microsoft, but the vast majority of codecs have been created by other companies, organizations or individuals. By default, the Windows operating system and the player includes a number of the most popular codecs, such as MP3, Windows Media Audio and Windows Media Video.

  There might be times, however, when you want to read the content that is compressed with a codec that does not include Windows or the default player (for example, a file compressed with the DivX video codec or the Ogg Vorbis audio codec). Because the player is extensible, in many cases you can download the necessary codec on the web for free or for a fee.

  You can visit the following links for more information on codecs:

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  You can also view the following link to download the audio file conversion programs and check if you can convert AVCHD to Mpeg.

  Convert music, videos and photos from one format to another

  http://Windows.Microsoft.com/en-us/Windows-Vista/convert-music-videos-and-pictures-from-one-format-to-another

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have Photoshop CS6 and Lightroom 5.7. They are currently installed on a PC with Windows 8.1 Professional 32-bit and 4 GB of RAM. I want to move to a PC with Windows 8.1 Professional 64 bit and 32 GB of memory, because I have a problem with the large

  I have Photoshop CS6 and Lightroom 5.7. They are currently installed on a PC with Windows 8.1 Professional 32-bit and 4 GB of RAM. I want to move to a PC with Windows 8.1 Professional 64 bit and 32 GB of memory, because I have a problem with the large RAW from a Canon 5 Ds R. What should I do?

  You install exactly in the same way you did the 1st time... Put your disc in the drive, and enter your serial number when asked

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• Problem with the clone stamp and Healing brush, as soon as I use them I get a second image duplicated on top that move with the tool

  Problem with the clone stamp and Healing brush, as soon as I use them I get a second image duplicated on top that move with the tool

  You're apparently talking about Photoshop, so I'll pass this on Photoshop beginners forum.

• Hi, I have a problem with the import of the 4000 SJCAM MOV files. MOV files are in formats supported for Adobe Premiere elements 11. But if I am importing of MOV file, only audio part is imported, part video is not imported. How can I solve this problem?

  Hi, I have a problem with the import of the 4000 SJCAM MOV files. MOV files are in formats supported for Adobe Premiere elements 11. But if I am importing of MOV file, only audio part is imported, part video is not imported. How can I solve this problem?

  haben

  Looking at the specs of your camera (SJCam 4000), we already know what video compression your camera uses. It is H.264.

  A H.264.mov file should be accompanied by a first elements 11. On what computer operating system is your first items 11 running?

  You have the latest version of QuickTime installed on your computer? And, you use QuickTime and first of 11 elements of a

  Account user with administrative privileges? Please go to Premiere elements 11 publish + share/computer/QuickTime to confirm that you will find

  presets it to the choice of QuickTime, it.

  What are the properties of these files H.264.mov - is it 1080 p (1920 x 1080 p 30) 30 or something else? Do you know if this device is registering with a variable or

  a constant rate?

  Please check and review and then we'll decide what next.

  Thank you.

  RTA

• Hi, I have a problem with a basic movement scroll effect.  I've already looked and read every tutorial out there about it and even tried the cat to adobe support, but the guy at the other end of the line disconnected me..., he probably didn't unde

  Hi, I have a problem with a basic movement scroll effect.

  I've already looked and read every tutorial out there about it and even tried the cat to adobe support, but the guy at the other end of the line disconnected me..., probably he did not understand what I wanted him, because English is not my native language, so one will try to be very clear on this one...

  Please note that I am new to dream, this is my first project ever.

  My idea is as follows:

  When the customer comes to our site of companies, he sees just our logo on a white background. the logo is composed of, say, four elements. When the client makes a scrolling down, the logo begins to transport: first the first part of the logo flies on the left side of the site, then the second part of the logo disappears down, then the third part of the logo flies to the right, then the fourth part of the logo flies upward and out of sight of customers. given what I've seen, it is possible to do...

  so...

  now I have four parts of my logo imported as png files in muse and was assembled in design mode to build our companies logo. I select each of the four parts and go to the effects of scrolling to the left tab next to the tab layers first I get the same values for each of the four parts: first movement: x 0 and x 0 again for the movement of the left and right; key position (t-handle): 0px; final movement: x 0 and x 0 for the value of left and right.

  now, I hit "Preview". : the logo is "pinned" to the correct location, I can scroll but the logo stays where it is. So far so good...

  now, I select all four components again and go to the tab scroll to 'final motion' effecs, I click on the drop down arrow and enter 1 x. I struck an excerpt...

  When I scroll the WHOLE grave logo down... well.

  NOW, I want the first part of the logo down, THEN part II to move left, THEN the third part to go to the top, THEN the fourth part to go right.

  so I select ONLY the first part, go to the request of scroll, to the 'final movement' tab, I click on the left arrow, then I go 1 x. (the value of up-down, I put to 0 again)... I struck an excerpt...

  the first part of the logo is left as soon as I start to scroll, the other three parties still go down at the same time...

  NOW, I want the second part of the logo to start to move, when the first part left, not at the same time as the first part.

  THEN I SELECT THE SECOND PART AND DRAG ITS HANDLE IN T (KEY ITEM) DOWN, LETS SAY: 200PX. THEN IT STARTS TO MOVE ONLY AFTER THE CUSTOMER HAS REACHED THIS POINT, RIGHT?

  BUT WHEN I SAW THAT *, THE LOGO IS NO LONGER TOGETHER, THE SECOND PART IS FLOATING ANYWHERE, BUT WHERE IT SHOULD BE... WTFF?

  short: when I move the t-handle, the initial position of the object changes. That's what I said to the adobe employee, but he said, this is the expected behavior...

  But if that's the case, how can I have my four parts correctly together, so they form my logo, but with different t treats, so they all start to move at different times?

  Pleeease help me, I will die of frustration here...: () this behavior is not normal, right?

  Thank you very much to everyone who reads this message and tries to help him...

  All the best,

  Niki Lapan

  I'm not good at explaining things that im going to download the file, I did for you. hope this helps you solve your problem

  https://www.mediafire.com/?xiild0yhr5cna7s

• Problems with the movement of the front and back layers

  Hey everybody!

  I am very new to Flash, very very new to actionscript and basically, I started programming in general 2 days ago, and I have a problem with the layers in a project. I tried learning through books, but especially thanks to youtube tutorials, but I'm stuck here.

  Here is the .swf file: http://dl.dropbox.com/u/14319641/Flashprojekte/Variuscard%20Headertest.swf

  And here is the original .fla file: http://dl.dropbox.com/u/14319641/Flashprojekte/Variuscard%20Headertest.fla

  Two problems:

  1. I want maps to fly BEHIND the Logo, but in front of the shadow - so that it seems that the logo is original and the rest (maps and shadow) is in the back. I have 3 layers (Logo, Action, shadow), but no matter how to move around it do not go to the back...

  2. I would like to have a second fountain Let's say right left... can I just copy and paste the code? Seems similar is not...

  Can someone help me on this one? Pleeeeez ?

  Mike

  To create an empty movieclip you just select Insert-> new symbol and select movieclip and click OK.  Simply exit the editing for this movieclip mode by selecting Edit-> Edit the Document.  You now have a new empty movieclip in your library.

  With the desired layer selected, drag an instance of the movieclip in the library in the upper left corner of the stage and then give it an instance name of "mc" in the properties panel.

  I have no CS5.5, so I don't know if what I described in selecting is changed in the new design.

• I'm having a problem with the pictures on some pagies partially of fully duplacating other tiles nearby. Only occurs with Firefox.

  I'm having a problem with the photos on some pages partially to duplicate completely other tiles nearby. Only occurs with Firefox. The thumbnails are refreshed when I move the cursor over them, but again distort when you scroll the page. I have a few images, but cannot up-load them on this page of support for some reason any. Maybe I can email you if you need?

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can check the preferences of network.http. * on the topic: config page and make sure that they have the default value.
  You can restore the default user set prefs ("BOLD") via the context menu.

  • http://KB.mozillazine.org/about:config

• Problem with the D-U-N-S: Urgent

  I am trying to register my organization on an Apple Developer program.

  I got a valid D-U-N-S number sent to me by D & B on 2 February 2016.

  However until now whenever I try to register my business using the D-U-N-S number, I get the following error message:

  «The information you entered does not match your profile in the D & B database.» "Before submitting your information to the Organization, get your D & B profile."

  I watched and the profile exists.

  I sent a query to D & B, but we were told to contact Apple directly.

  We have created a deal on the Apple Support and we ardently and desperately waiting for a response.

  Someone from the community can help me on this issue. Please consider as urgent.

  Hello Nabla_business,

  Desperate? You should be aware that Apple is moving at glacial speed on these issues. On the one hand your number DUNS has been created. You must wait 60 days before attempting to create an account. However, it seems that your information has been through to Apple. You will have to wait for the Apple support to constct you. You may need to make repeated through several channels attempts to attract the attention of Apple.

  I had a similar experience. The problem was that when Apple imported data from Dun & Bradstreet, they completely scrambled my address. But I had no problems creating my account so your questions can be worse.

  And I would warn your words "emergency". Apple has a huge backlog of similar problems. In my case, the only way was able to get my problem resolved was when a Technical Support engineer used Apple Remote to go into my machine and then look at the developers own Apple Site. But I had this problem to be solved. I had many other problems with the tax forms.

  My point is that it can take up to a year, in order to get your developer account fully Setup. I suggest you open an account, personal development and test purposes. Be sure to use IDS bundle dedicated to this purpose. This way, when your business is finally set up, then you will be ready to go and become familiar with the process.

• Problem with the HP G62 recovery disks

  Hello

  I'm having a problem with the restoration of the operating system on your laptop HP G-62. When I first bought the laptop, I was unable to make the recovery discs, so I ordered recently a few new HP. Because I have installed Ubuntu on the laptop, I wiped it from the disk hard drive used Wipedrive to remove the old Ubuntu operating system I had installed.

  Laptop computer reads the first disc ok and installs the component of windows, but when the screen lights up asking the two disc number it freezes and never installs anything when you try to move anything that used to screen it doesn't matter what and he used to install the second disk. He repeats just 'Please wait '.

  Thank you, Robert

  Hi, Robert:

  I can't help you get the recovery disks to work, but if you can read all 25 characters of the product key 7 windows on the bottom of your PC, you can do your own installation disc 7 windows to reinstall the operating system.

  Here's how:

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• Problems with the Display Mode target on end 2009 27 "iMac

  Used late 2009 iMac 27 "in the view target in conjunction with a Dell XPS tower with i7 processor, Windows 7 and the best graphics card I could afford at the time connected by HDMI to mini display port cable.  Worked well for years.  Set aside Dell for a few months and the update of the iMac to El Capitan OS 10.11.3.  Recently tried old setup with same Dell PC and was able to move from Mac to PC, but the PC screen resolution was at the lowest setting. I got an error message when enabling/disabling to PC who said there was a problem with the port causing mini display of the system back to the lowest resolution. Impossible to reset at a higher resolution.

  I tested the Dell PC on another monitor, and it works very well at higher resolution (2560 X 1440). Now, when I reconnected it to the iMac (which works fine), the screen becomes black.

  Is it possible that the operating system upgraded (El Capitan) is not compatible with the targets using mini display port Display Mode?  Any ideas?

  Use your iMac as a display with the target - Apple Support Display Mode , also consider having a bad cable or connection. Does not hurt to try different cables, they can and will the bad!

• Qosmio G20 error message: problem with the cooling system has been detected

  I'm trying to fix a Qosmio G20 (which is about 3 years old, it is no longer in warranty).

  Error message: Warning: a problem with the cooling system has been detected.

  I managed to remove the outer case and observe the operation of the machine, and basically one of the fans does not at all. The fan which is closest to the power connector seems to work very well (he seems to be turning a lot, do not know if this is normal), but the other fan who does not seem to move at all.

  When I put in place the case and on the machine, I noticed after a few minutes the vent of the fan working heat sink had warm enough, while led the non-working fan remained cool.

  I cleaned the fan from dust and have also changed the BIOS battery mode mode high performance, but the problem still exists.

  I would be grateful if someone could give advice if the problem is the fan or something else.

  If the fan is the problem, where I can buy a: i live in the United Kingdom?

  Hello

  I think there might be something wrong with the cooling module and the replacement would be necessary.
  Usually, this should be done by an authorized provider (ASP) in your country.

  Technicians could replace it with a new part and also could renew the thermal grease which is placed between the module and the CPU cooling.

  So contact the ASP in your country and ask for later handling.

  By the way; also, you can buy the cooling of the ASP module!

  Good luck

• Some problems with the Camileo webcam

  Hello!

  as a first step, please excuse me for my poor English writing!

  I have a TV and it seems that many users in France have the same problems as me:

  * When I'm in webcam mode, I cannot use the microphone of the camileo, is this normal?
  * When I try to open my movies in windows movie maker, it crashes. What is the problem? It seems that the video format of the camileo is not recognized by this software,... strange!

  Thank you very much!

  Yann

  I saw this cam but I'm not familiar with the whole feature. The fact is that each webcam with built-in mic should offer its use with different applications such as Skype, MSN, ICQ and others.

  In my opinion, there is a problem with the settings and check these settings in the application, you use. In most of them, you will be able to select the sound source.
  All video format I can say that based on the description you can choose between AVI and MPEG4 format.

  By the way: you try to open the files saved on the HARD drive?