Problem with the installation of the XP SP1.

Similar Questions

• Problem with the Conexant HDAudio after installing x 86 Vista SP1

  I didn't want to start a new thread, but it seems that my problem is quite unique.
  
  When the first x 86 Vista install my speakers/headphones worked great. After Vista SP1 installed, my speakers/headphones went silent, but the pilot was still there and working properly. I uninstalled the driver and let Windows automatically install a different driver. (No Rollback was available) I could get the sound from my speakers. Speakers are the only thing that works if I plug into the headphone jack or not.

  When connected to the plug headphones I have test the headphones feature in playback devices and receive nothing in the helmet.
  
  Drivers of HP support only cut my speakers while doing my reading helmet camera disappear. Even with the updated driver.
  
  I like to use it as a TV computer and would like the sound of the TV via the headphone jack.
  
  I searched EVERYWHERE on the internet and found no resolution. Any help would be appreciated.
  
  HP pavilion dv6748us

  Conexant Audio
  
  Hardware ID:

  HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30CF & REV_1000

  HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30CF

  Have encountered problems with the card drivers its me on vista & 7 even when driver installation correct support downloaded installers.

  Only solution I found was to download a range of versions of different driver bought research google & trials, tedious but sometimes only way to get the result.

  If you uninstall the driver & restart it installs a generic driver audio Conexant or Windows!

  I also use my laptop with TV & hifi so work taken audio is a must (card input jack usb audio can be an option if)

  Also never rule out the fault of Council helmet as have a Pavilion & after that OS installed on a new drive HARD had no audio for headphones, pilot presumed linked, but after fiddling fuond twist got jack sound, turned Ribbon glued on card Board failed.

• Problem with the installation of iOS 10

  I tried to install iOS 10 earlier but it did not work, so now that I'm trying to reinstall iOS 9 if my phone will work again, if this does not work I have to reset my phone (but I am a fool and did not a back-up because I never had a problem with the software updates in the past if all data will be lost).

  < published by host >

  The same problem with me too. After installing ios 10 nuer OTA my iphone brick! I'm trying to re - install ios 9 i-Tunes, but 2 hours now always stop installation... what happent?

• Satellite L875-13D - problem with the installation of the wireless card

  Hello

  I bought a Toshiba Satellite L875-13D. I installed Windows 7 Enterprise edition.

  I have a problem with the installation of the wireless card. I have downloaded the driver on Toshiba website, but it does not work. When I run the file .zip and .exe, nothing happens. In addition, there are several pilots: Athos, Intel and Realtek and I do not know what is mine... I test all the driver but same result.

  I have the same problem with Bluetooth driver that does not work too.

  Thank you for your help.

  > But it does not work yet for Bluetooth,... I have install the driver by the .exe from the Toshiba Web site but when I run the application, I have error that says missing tosbtapi.dll. I founded and downloaded and installed on budget3 and SysWOW. But after that, the installation is blocked. Any ideas?

  Laptop Satellite L875-13D isn t equipped with Bluetooth.
  Didn t you know who?

• Satellite Pro A120: I have problems with the installation of the graphics driver for W2k

  I installed windows 2000 on an A120, the system is fully packed and service updated before I even start to install the necessary drivers, I am unable to restart the system. I once, install as recommended drivers that I have problems with the graphics driver because it will not be installed because it requires a reboot and then I can't install new programs that require a restart that the driver has not been installed correctly.

  The laptop is a Pro A120, age of 1 week and came with XP home, because of this toshiba will not offer me support I changed the o/s even though they obviously support 2000 on this laptop, because they provide the drivers.

  Any ideas would be greatly appreciated.

  Hello

  Did you use and install the drivers from the Toshiba driver page right?
  The drivers of Toshiba W2k for Satellite Pro A120 have been published and are ready!

  But please pay attention to the Toshiba drivers.
  There are two different sets of Satellite Pro A120, with different drivers W2k!
  After choosing the good laptop and download the drivers please follow the proper installation order that is indicated in the document "installation instructions"! Check it!

  I think that if you follow this guide line everything works and runs correctly. Good luck

• Problem with the new installation of Windows XP on the Satellite A100-259

  Hi all!

  I have a problem with the fresh install WIN XP on Satellite A100-259 (PSAA2E).
  I already deleted the partition, formatted (NTFS) and tried to reinstall from recovery disk that initially provided with the laptop. But whenever I try to install a problem is detected (for the most part it's 'page in the nonpaged area failure').

  I also tried to install the OS directly from MS Windows XP Home Edition SP2 CD - the same problem.
  I checked the partition using PQ Magic and discovered that there are ' partition table error #110 ".» So, what I did:

  (1) delete partition-> create new partition-> format (NTFS)-> reinstall from recovery disk-> has not yet;
  (2) partition delete-> install WinXP CD original by create and format partition option-> has not yet;
  (3) delete the partition (using the magic of pq)-> create partition (using the magic of pq)-> format NTFS partition for win xp option-> check partition-OK no problems don't-> installation of original win XP CD-installation without changes-> option failed even once
  (4) delete the partition (pq magic)-> create partition (pq magic)-> format NTFS partition for win xp option-> check partition-OK, no problem-> installation of the recovery disc-> has not yet

  Whenever a different error is detected, so I can't identify the problem. I don't know what to do. Does anyone have any ideas?

  Hello

  Seems that there are some problems with the standards of the partitions.
  A friend of mine has tried to install the OS on the recovery CD on the laptop that has been formatted with Partitions Magic 8 and the installation failed.
  It was very strange

  Finally, we have formatted the whole HARD drive using the CD original Windows XP Pro.
  We did not remove the partition but simply kicked this CD and after the configuration process spent, we formatted the whole HARD disk and install XP without creating all the partitions.

• Problems with the installation of recovery - Satellite A300D - BSOD

  Hello

  The laptop in question (TOSHIBA Satellite A300D) recently stopped starting (BSoD).

  So, I tried using the recovery disk, but there is no help. What happens is:
  -After about 10 minutes of waiting, the first language menu load, so I click on "next".
  - Then I again click Next and accept the message that my HARD drive will be erased
  - Then I see a cmd prompt that says "try to remove all the letters of partitions possible...". »
  -There is also a minimized command prompt that says something like "RAID failed to initialize."
  -And then nothing happens.

  Is this a hardware problem? I also tried a full installation (instead of recovery), which, even once, is simply not. None of the errors is - it just freezes.

  Any help appreciated.
  Thank you.

  It is not easy to tell what can be the problem, but if you were not able to install the OS by using two different facilities CDs/DVDs, so there must be a problem with the HARD drive.

  The warranty is still valid?
  I mean you can contact the nearest Toshiba authorized service provider and explain the situation. They can swap the HDD and again test the recovery procedure.
  Can you get somewhere 2,5 SATA HDD for testing?

• Problem with the installation of Windows XP on the Satellite A200-1RK

  Hello!
  I ve you have a problem with my laptop.
  I would like to install Windows XP SP2 instead of Vista, but I had a problem with the hard drive,
  Windows XP Installer cannot find the hard drive. It is problem with drivers disk, but the site of tohsiba I can´t find my laptop and the disk for XP drivers.
  Why?
  Can someone help me?

  Maybe I can use drivers from another laptop A200 series, but which?

  Hello
  a good explanation how to install XP on a SATA machine can be found here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=29342

  Welcome and good luck

• I tried to install the latest version of itunes with windows 10 but he said "there is a problem with the installation package. A program to complete the installation could not be executed. Please contact the support staff. No matter what guys?

  I tried to install the latest version of itunes with windows 10 but he said "there is a problem with the installation package. A program to complete the installation could not be executed. Please contact the support staff. No matter what guys?

  (1) temporarily disable your security/antivirus software

  (2) download iTunes from the official source: http://www.apple.com/itunes/download/

  (3) try to reinstall

  (4) turn on your anti-virus

• HP Envy 17-2100ed: problem with the installation of a driver on my laptop

  Dear readers,

  I have some time for problems with the installation of the drivers on the HP site. Whenever I chose a driver, such as for the Cyberlink Youcam software, the download process will be blocked at 28.9 MB, a total of 154 MB. I also tried to install the software for my HP printer, but once the same question.

  Can someone help me? Thanks in advance!

  Kind regards

  Amir

  Hello @Amirkalloe,

  Thank you for visiting the HP Forums! The Forums are a great place where you can find solutions for your problems, with the help of the community!

  I came across your post about the problem of driver and he wanted to help!

  Problems installing drivers, or by downloading the drivers?  If you have problems to install the drivers, you can use the tool on the following site:

  Open the Windows Update troubleshooting tool

  Let me know how it goes.  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Problem with the Installation of JAVA in my new Dell running Windows 7

  Problem with the Installation of JAVA in my new Dell running Windows 7 - error message when you try to intall Java using Chrome.

  "lib'charsets.jar: old file not found."  However, a file of the same name was found.  No updates since the contents of the file do not match. »

  Then "Java update fails to apply the changes to your system."

  Then "error 1722.  There is a problem with this Windows Installer package.  A fun program as part of the Setup did not finish as expected.

  Earlier, I had a problem with the video and had Windows reinstalled 7.  Now my AOL games don't show/reading.  JAVA said error 1722 is an InstallShield error code. It indicates that the installation process has failed. The exact reason for this error is not known at this time.  I was told to uninstall JRE (Java Runtime Environment).  I find two versions of Java on my system (no JRE) - Java (TM) 6 - update 14 and 14 (64-bit).  Should I uninstall both?... OR WHAT?

  Hi Betty48228,

  Here's how to solve your problem:
  (1) uninstall all versions of Java.
  (2) the uninstall will probably fail. If so, get Revo Uninstaller free http://www.revouninstaller.com/revo_uninstaller_free_download.htmland uninstall Java in advanced mode (integrated Java uninstaller runs, failure and then Revo will delete everthing manually). You will need to restart your PC.
  (3) reinstall Java: http://java.com/en/download/

• Hi.I download Microsoft Security Essentials and installation becomes a problem with the code: 0 x 80070643. If you can help me...

  Hi.I download Microsoft Security Essentials and installation becomes a problem with the code: 0 x 80070643. If you can help me...

  Support Microsoft Security Essentials forums
  http://social.answers.Microsoft.com/forums/en-us/category/MSE

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problem with the Package Windows Installer... when trying to install ITUNES 9.2 and Quicktime.

  I bought an IPHONE 4 yesterday.  For more than 7 hours, I tried everything to download ITUNES 9.2.  I get the same error.  I spoke with apple as Microsoft.  I didn't PAY to get assistance from Microsoft yet and I hope I don't have to.

  Error: problem with the Windows Installer Package.  A program required for this install to complete could not be run.  Contact your provider to support personal or package.

  I have Windows XP.  I uninstalled and re-installed Safari and which did not help (at one point, I had problems with Safari).  I also have at one point received an alert on 'applesync.notifier' could not be executed.

  I have no idea where from here, but I'm frustrated.  I want to use my phone for something more than "just a phone" and I can't.  I have to carry my OLD Iphone (1st generation original).  Help<><>

  There is a simple way to do it!

  I had this problem too, but I did

  first open Installer u then let it install

  When you get the messege, click ok and it will say restoration of action but don't get put off by this cause after 5 min, it will say: it is installed and restart your computer

  hope this has helped

• Problem with the installation of the webcam VX2000

  problem with the installation of vx2000.  After installation, I hit finish and get error Lifecam.exe has encountered a problem and needs to close.  The program is installed and the icon on my desktop but when I try to open it I get the error.  There is no Logitech drivers installed, have the latest version of the driver, uninstalled/installed in many times, did a clean boot.  Tried on another computer (same operating system) cam and installed and worked perfectly.  Reformatted the drive on my computer and and had the same problem error once again.  Checked the error reports and it shows kernel32.dll as the defective module but it, s not to be missed in System 32.  It may be corrupt and I would like to replace it.  If anyone can shed some light on this problem it would be greatly appreciated.  Thanks, Max

  Hi Max1215,

  Follow the steps in the article.

  Troubleshoot failures to find the new LifeCam hardware

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

• PROBLEM WITH THE INSTALLATION OF UPDATES

  When the computer tells me to reboot to complete the installation of updates, I do.  It stops normally, but when he tries to restart, the screen goes completely dark.  I have to press the market / stop button for 4 seconds & it stops.  I wait a few minutes start computer & it starts normally & then it finish installing updates.  My question is what could cause the problem?  I learned recently by Microsoft (office of answers) that there is a big possibility that I corrupted the registry files. She did a remote help on this laptop for a problem with the execution of any Microsoft fix it Solutions.

  I would like to know what else could be the cause of the problems and what I could try to fix it?

  CF. http://answers.microsoft.com/en-us/windows/forum/windows_vista-update/windows-updates-wont-install/9ae86061-ff1e-4996-b5a2-8918d01588ab (10 Dec-15)

• Message 'there is a problem with the Windows Installer package

  I have Vista 64-bit Service pack 2

  On my computer HP ProtectSmart Hard Drive Protection has stopped working... .it shows such as the disabled and 'activate' is grey.

  I went to HP to download the new version.  It downloaded, but then to install I got the following message:

  "There is a problem with the Windows Installer Package.  A program run as part of the Setup did not finish as expected.  Contact your supplier of staff or the package of support ".

  How can I fix?

  Please help pleas...

  Thank you

  "C:\Windows\system32\msiexec.exe'-I 'C:\Users\David Candy\AppData\Local\Temp\IPDT_Install.msi '.

  Is the command line to install a particular product. Use the Task Manager to find your command line.

  Then change to add logging.

  "C:\Windows\system32\msiexec.exe" - working '% userprofile%\desktop\install.log'-I 'C:\Users\David Candy\AppData\Local\Temp\IPDT_Install.msi '.

  FixIt

  Microsoft has a range of automatic programs to solve common problems. To see Windows Installer problems

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  
  --