Problem with the multiple render targets

Similar Questions

• Problems with the Display Mode target on end 2009 27 "iMac

  Used late 2009 iMac 27 "in the view target in conjunction with a Dell XPS tower with i7 processor, Windows 7 and the best graphics card I could afford at the time connected by HDMI to mini display port cable.  Worked well for years.  Set aside Dell for a few months and the update of the iMac to El Capitan OS 10.11.3.  Recently tried old setup with same Dell PC and was able to move from Mac to PC, but the PC screen resolution was at the lowest setting. I got an error message when enabling/disabling to PC who said there was a problem with the port causing mini display of the system back to the lowest resolution. Impossible to reset at a higher resolution.

  I tested the Dell PC on another monitor, and it works very well at higher resolution (2560 X 1440). Now, when I reconnected it to the iMac (which works fine), the screen becomes black.

  Is it possible that the operating system upgraded (El Capitan) is not compatible with the targets using mini display port Display Mode?  Any ideas?

  Use your iMac as a display with the target - Apple Support Display Mode , also consider having a bad cable or connection. Does not hurt to try different cables, they can and will the bad!

• Problem with the command "save target as".

  When I use the ' save target as ' congratulate some sort box 'Close this dialog box when download is finished' got checked. The box disappears before I can disable the checkbox. How can I disable the checkbox?

  JustZoe,

  Welcome to the Microsoft Answers community. I found an article that can help you here:

  Uncheck close this dialog

  In addition, another option would be to do a System Restore to a point before that you made this change.

  I hope this helps.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with the format of the values in the command prompt (when you use multiple values)

  Hi all
  
  I have problem with the format of the values in the command prompt when you use multiple values.
  
  Value is year (2009) and when I use it in the drop-down list that is formatted, all right, as 2009, but when I use several values I get number as 2009,00. I put in year column format number with 0 decimal places and save by default in the year column. Year is formatted well anywhere in the query, such as 2009. Why is - what happens at the command prompt when you choose multiple values in prompt dashboard?
  
  Thank you

  I think the YEAR Data Type could be defined DOUBLE RPD.

  Use the CAST function in the formula (fx) and the output from test.

  CAST (INT YEAR)

  Hope, it will help you.

• Problems with the start of the vi using TCP on a cRIO, error code 63

  I'm trying to deploy the 'multiple connections - Server.vi' in examples of TCP & UDP to a cRIO as the startup application. The vi works fine and I can connect with many clients until I have deploy the vi and set it as vi on a cRIO device startup. When the device restarts and I try to connect with the 'multiple Client connections 1(vi)"also found in examples of TCP & UDP, I get"error 63 occurred to TCP connection open. Are there additional parameters that need to be enable to allow TCP as the boot vi?

  I don't know that is the question and I don't have an RT target available to test it, but here's a possibility: property nodes sometimes do not work as expected when you run on a RT system without front panel.  In the case of multiple connections - server example, the first thing that happens is that the VI wrote a false value in the property node.  As explained in the link, this has no effect.  For example, if the default value of the control 'Look stopped' is 'True' the top loop will close after the first run, which will stop the VI, probably leading to the error that you see when you try to connect.

  To resolve this problem, I recommend you remove the 'Missed listening' control completely and change conditions to stop for the two while loops.  You run a compiled application on RT, so unless you will connect using a remote panel, there is no need any façade including the stop button control.

  EDIT: if I have correctly identified your problem, you can vote for this idea: "Warn on the face property node to use when you build a RT".

• SEVERAL problems with the new X 34

  So, I have been active during the overclock.net forums concerning the many problems I am having with my X 34.

  Long story short, I'm back this thing to Newegg and waiting for another delivery. But I thought I'd come at least here because it has high liklihood to return to anyone who cares to Acer. I called their tech support to let them know about the issues, but when the old Indian robot for 2 years at the other end kept referring to as resolution of refresh rate, I decided that I couldn't take more.

  So I took delivery of the monitor yesterday and he initially worked well... but the longer he stayed, the more problems, he has developed.

  My system is one I built a year or two ago and works perfectly with my Dell 3008WFP. Video card is a brand new MSI 980 Ti Lightning. Operating system is Windows 10 x 64. Is a Corsair 750W POWER supply. 16 GB of DDR3 RAM.

  I even made a COMPLETELY new install of Windows 10 on this computer to try to resolve these problems. Did not work. I have disconnected/reconnected everything inside my computer, including RAM and GPU. Did not work.

  And Yes, G-sync is enabled in the NVCP. And Yes, I manually set the refresh rate in the NVCP in correlation with the manual settings on the monitor.

  Problem no. 1: Menu recording does not settings

  -Don't know what the problem is here. But for about 3 hours last night, my monitor would not save settings for serger refresh rate. I would go on the menu... allow the serger... Set it to 100 Hz... Select "Apply and restart. Then (here's the interesting thing I think in hindsight), the screen would flash many colors several times and restart. I assumed that flashing color was normal... but it was never the Predator Logo when it has been reset. The office is finally pointing upwards and I could choose 100 Hz in my NVCP... but when you returned from the settings menu, Overclock was Off back with the default refresh rate. I have nothing would fix it with the reset of the monitor and unplug. Later... I have unplugeed the monitor for 30 minutes and when I plugged it back in, it would save my overclock settings now. It is interesting, but now, when I selected "Apply and reset", he would show the Predator logo when restarting... this logo did not appear before.

  Problem #2: Flashing screen

  -See a video of this question HERE

  -This developed before my eyes. After the initial installation of the monitor, it worked fine. Without no flicker, no problems. But as I was sitting at the dinner table last night, I started to see the monitor flashing intermittently in the other room. I look at the screen, he flickered about 4 or 5 times per minute. For the next hour, he progressed to 30 - 40 times per minute. And subsequently developed in constant blinking. BUT this flicker only happens when I go to the Office at 100 Hz. It happens sometimes in games, but not constant.

  I first thought that I had a bad cable of DP since I used one from Amazon, if I swapped it for the Acer cable included. Nope... same problem. I even inserted my previous EVGA 780 TI... but the flicker that happens too.

  Then, I thought it was a driver problem, I did a clean install of the nVdiia previous drivers. Nope. Then a cleaning installed latest drivers from nVidia WHQL. Nope.

  Then I saw here that you can download the drivers for the monitor directly from Acer. So, I did a guy like an unsigned driver installation. Nope.

  After all this, the problem persists.

  Strange thing about this one is that there was when I first got the monitor but got progressively worse since I got it.

  Another weird thing is that if I have a window open, then it isn't twinkle... reduce the window, and he comes back. It's actually what made me think, it was a driver issue, but as you can see above, I think that I have ruled that that fully.

  Also, if I set my refresh rate to 95Hz or below, the problem occurs. (This is actually how I currently work).

  -UPDATE: the issue has actually started just after executing i1Profiler to calibrate the screen several times back to back. I can't imagine how, but could the rapid exchange of multiple colors full screen damaged electronics somehow? Or is it just a weird coincidence?

  -UPDATED #2: it was suggested that ADC can cause the problem as it caused problems with the previous Acer monitors. So I completely deleted i1Profiler and reset my default .icc profile. I also think that I figured out how to do a monitor factory reset - if you hold the buttons first and fifth, restarting the screen and all the default settings. in any case, does too and the blinking persists...

  #3 problem: Backlight horrible bleeding

  I have to type anything here? Leave some pictures to speak for themselves...

  

  

  Trouble #4: Parts of the screen does not not on

  It has been described elsewhere, so I won't detail it here. But yes, I have the same problem. Here is a representative of my monitor picture when the issue arose.

  

  Overall, I am extremely disappointed, although I can't say I'm surprised. I mean, we deal with Acer here guys... Not exactly known for the high-end products. You can put the red lipstick on a pig...

  So is there more any idea or suggestion out there?

  Until then... I'll wait for my new X 34 excerpt here from Newegg to see if I won the lottery of Acer he...

  I created this post to be a "accepted solution" to this thread with the purpose to help other users who need to find the answers. This should help to find this information faster than to have to go almost 800 posts to find pieces of information.

  Wake up from sleep (backlight) - initial response and follow-up

  Problems with Overclocking at 100 hz - original response

  Coil - Whine Original response

  Color banding - users in Australia reported the problem. The teams in the region to THE have been notified and a firmware is available.

  -Scanning lines Original response

  Thank you
  Cory

• Windows Media Player cannot play the file because there is a problem with the audio device.

  Original title: Media Player

  I tried to play my music in media player and they will not play. The tab that appears says "Windows Media Player cannot play the file because there is a problem with the audio device. It might not be a sound device installed on your computer, it can be used by another program, or it may not work properly. Also, I can not play music in the window, that I downloaded everything. If anyone has an answer I would appreciate the help. Thank you

  Hi MikeMcKayXE,

  ·         What is the brand and model of the computer?

  Follow the suggestions below for a possible solution:

  Method 1: Quit other programs that may be using your sound device, and then try to play the file again.

  Method 2: Install an updated driver.

  Step 1: Firstly uninstall the audio from the device manager driver and Add / Remove Programs

  a. click Startand then click Control Panel.

  b. click Systemand click on the hardware tab, then click Device Manager.

  c. to the title sound, video and games controller, check the sound card that is listed.

  d. right click on the sound card, and then click Uninstall driver.

  Step 2: To see if an updated driver is available, use Windows Update or access the sound device manufacturer's Web site.

  Follow these steps to do the same thing:

  a. click Startand then click Control Panel.

  b. click Systemand click on the hardware tab, then click Device Manager.

  c. the title sound, the video controller and games, make sure that the sound card is listed.

  d. right click on the sound card and then click Update driver to install the latest version of the driver.

  e. visit the sound card manufacturer's Web site to determine if a newer version of the driver is available for download.

  Method 3: If you have multiple audio devices installed on your computer, try to use another. The selected audio device might not support Secure Audio Path (SAP).

  You can see the following article for more information:

  Resolution of the problems of reading in the Windows Media Player for Windows XP

  http://support.Microsoft.com/kb/306317

  Let us know if that helps.

• Problems with the display settings in Windows XP on my acer aspire netbook

  Lack of custody of my office and the bottom was always blue. When for example I opened the menu options for DIVX it's all close together and the window is way to big for the screen I can't see all of the screen. Also problems with the connection to my netbook to the TV. It should never be on the screen and I can't understand how difficulty. Any suggestions

  Hi CharlesHefty,

  1. do you get an error message or error code?

  Check the event viewer for the newspapers of the related events that could help us solve the problems:

  Procedure to view and manage event logs in Event Viewer in Windows XP

  I suggest you try the steps from the following links in the article and see if it helps:

  How to solve problems of hardware and software drivers Windows XP

  How to configure and use multiple monitors in Windows XP

  Overview of multiple monitors

  I hope this helps.

• Problems with the help of web camera, it shows it programs and on the desktop. But when I double click on it. It will go to the program do not know what to do. Help, please. Thank you.

  Having problems with the help of web camera program does not work when I click it. don't know what to do. Please help thanks.

  Hello

  Right click on the shortcut tab icon - properties - look on the target line to see where and what type of program
  is supposed to work.

  You will probably need to reload the drivers of the device and any camera control software.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse.

  Original title: right click on the mouse itself activating

  I borrowed a USB to a person at work and I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse. The left click of two devices works normally, however, sometimes she does not respond to clicks and it takes a few seconds to work. The left button was constantly starts to turn on, as if he was stuck. After that I hit Alt + Tab and modify windows it stops for a few moments and starts at a later date. I havo not found a specific condition or a combination of keys that may trigger the fault.

  I read a few posts on discussion forums, but all say that it could be a hardware problem, which I think is not, because both devices have the same problem and I'm sure it all started with the insertion of the borrowed memory stick. I scanned the readers to help Symantec's EndPoint Protection and installed Microsoft Security Essentials and performed a full scan, but found nothing. I even restored the system, but the problem remains.

  Should I get a different antivirus? How can I find the cause so I can find a better targeted solution?

  Try to install the drivers from this link and check.

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167

• "Détarer" problem with the Torch 9800/Device Simulator

  Hello everyone,

  Im a very strange problem with the Torch 9800 (OS 6).

  I have an application developed with 5.0 SDK. Throughout the process of synchronization of this app, there is a point he gets a. tar.gz file that is unziped. For this purporse (in fact, the tar part / "détarer"), we use a tar / "détarer" 'library' we found here in the forum (http://code.google.com/p/j2metar/). This library works fine in all phones with OS 5.0 that we try and even on the simulators of somo 6.0.

  But there seems to be a problem with the torch. During the uncompress, there are an exception, because what is the reading of the structure of the tar (from the industry), load the bytes that are invalid, corrupt, dirty, memory, and it fails.

  The strange thing of all is that if I have only the routine détarer to the file (in the torch), it works! But when I run all my sinchronization, which open and close httpconnections and process the file on some points (sometimes the same point, others of different) fails.

  My question is... are at - it a known bug, issue, etc. with the BONE of the torch (touch device)? Of course, the first thing that jump to mind is "my code is incorrect, memory leaks (in Java, but perhaps odd that a stream was not getting close properly)" and so on, but I can't seam to find the problem. And like I said before, this application works fine with the same file tar.gz in other devices like the 8520 OS 5, 9780 OS 6, 8900 (OS 5).

  IM completely stuck with this problem and any help/test will be greatly appreciated.

  Here some code, the method that makes him détarer and calls the détarer/tar library:

  public static boolean "détarer" (String tarFileUrl, String destUrl) bird Exception {}

  FileConnection fconn = null;
  FileConnection tarFileConn = null;
  TarInputStream tis = null;
  Boolean bRet = false;

  try {}
  fconn = (FileConnection) Connector.open (destUrl, Connector.READ_WRITE);
  If (! fconn.exists ())
  fconn.mkdir ();   Create the folder if it does not exist
  fconn. Close();
  fconn = null;
              
  Create a TarInputStream
  tarFileConn = (FileConnection) Connector.open (tarFileUrl);
  TIS = new TarInputStream (tarFileConn.openInputStream ());
  tarFileConn.close ();

  Entry TarEntry;
  int count;
  data Byte = null;
              
  While ((input = tis.getNextEntry ())! = null) {}
  Count = 0;
  data = new ubyte [2048];

  fconn = (FileConnection) Connector.open (destUrl + entry.getName (), Connector.READ_WRITE);
  If (! fconn.exists ())
  fconn. Create();   create the file if it doesn't exist
  else {}
  fconn. Delete();    Create a new
  fconn. Create();
  }

  OutputStream os = fconn.openDataOutputStream ();
                  
  While ((count = tis.read (data))! = - 1) {}
  OS. Write (data, 0, count);

  }
                  
  OS. Flush();
  OS. Close();
                  
  fconn. Close();
  fconn = null;
             
  }

  TIS. Close();
  TIS = null;
              
  bRet = true;
              
  } catch (Exception e) {}
  e.printStackTrace ();
  throw e;
  } {Finally
  try {}
  If (tis! = null)
  TIS. Close();
  If (tarFileConn! = null)
  tarFileConn.close ();
  If (fconn! = null)
  fconn. Close();
  } catch (Exception e) {}
  }
          
  Return bRet;
  }

  Thank you!

  Santiago.

  Hello

  It is a problem with the OS 6.  I've posted about this before here:

  http://supportforums.BlackBerry.com/T5/Java-development/reading-and-writing-file-on-torch-9800/TD-p/...

  Basically, corruption may occur if you write to the stream simultaneously in different threads.  The solution is to ensure that a single file operation is occurring at a given time.  Some people have had the chance to control the size of the buffer to something as a multiple of (64 * 1024)-1. e.g. 65535.  In addition, you can rinse after each write to the buffer.  I have had no luck with this, but others.  If you look at the bug in JIRA, there is also no activity on this:

  https://www.BlackBerry.com/jira/browse/JAVAAPI-1513

  Good luck!

• I have a problem with the cursor on the computer.

  Original title: How can I stop this? When I click on a window to make it active, he admits that as a real click click and move the cursor on the page. Windows 7 pro

  Windows 7 pro 6.1

  I do web development on several screens with multiple applications open at the same time.  When I want to use a program that is on my second monitor I click it to make it active.  This click has also acts as a true clicks and moves the cursor on the page.  This can be very annoying because whenever I want to spend the programs I mouse over a sidebar of this application or try to click exactly where my cursor is in the document.

  Looks like a trivial question, but through the course of a day it gets very boring very quickly.  I don't remember that it works this way in older versions of windows, and I hope that there is a way to fix it.  What I would like is the first click on an app just make active in order to quickly click the apllication anywhere and start typing there where I left.

  Hi Vanamp,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you have a problem with the click of the mouse to activate a window.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.

  This problem occurs only with a particular application?

  This problem can occur if the mouse settings are poorly positioned.

  I suggest you try the procedure described in the article and see if it helps.

  Change the settings of the mouse
  http://Windows.Microsoft.com/is-is/Windows7/change-mouse-settings

  Check out the link for more information.

  Make the mouse easier to use
  http://Windows.Microsoft.com/en-in/Windows7/make-the-mouse-easier-to-use

  Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with the mouse settings, I'll be happy to help you. We, at tender Microsoft to excellence.

• The OID of the Migration of OUD, hitting the problem with the attribute pwdhistory OUD

  The OID of the Migration of OUD, hitting the problem with the attribute pwdhistory OUD

  I use sync DIP at the end of migration of data from OID for target OUD. Everything seems great so far, I have found that pwdhistory being migrated is not being validated by OUD password policy

  I do import ldif for OUD and find this pwdhistory field is populated with the same OID value. When I reset password in OUD-DOHAD with the word in the history of password,.

  Expected Behavior: Error Message from the OUD "" LDAP: error code 20 - already the value of specified password exists in the user input " "

  Course Behavior: OUD is what allows to reset the password in the password history

  Also found that when I try again with the same password, then it throws the error 20 code. OUD replaces the old values in pwdhistory after the password resets and written new values with stamp of password.

  It is a Blocker for us for migration in the history of password, I would like to join the forum and check if someone had the same problem and how they managed it?

  Thank you

  Satya

  Support of Oracle confirmed that DIO history for the OUD password migration is not supported. The OID and OUD records and validates the pwdhistory differently

• Problems with the export of

  Hello

  I had problems with the export feature in Photoshop 2015 CC. I think that the problems started some time around the most recent update, but it is possible it all started when I used the photo frame Script (filter > render > photo frame). I'm not sure. But as you'll see below, it is almost that the software attempts to create a setting when I try to export an image.

  In any case, when I try to use the export function, the image that appears in the dialog box is stretched and distorted.

  

  I can resize the box and the image will then appear normal, but then when I click on "Export all", the screen looks like this:

  

  The box save never actually appears. It's just a white box with a black column. It's almost as if the screen is not complete the drawing.

  And it seems that this problem starts even before I got to export in the form box. The beginning of Photoshop screen looks like this:

  

  The file names (which I have gray here) are not complete. They end up just with a white line that reaches out to the right of the screen.

  This has happened for at least a few weeks now. Stop smoking out and restarting does not help. I tried to reset my preferences and that did not help. I tried to delete the preferences file and it still happens.

  BTW, the Save for Web feature works very well.

  I work on a Mac with the following attributes:

  

  My Mac software is up to date, as well as Photoshop.

  Can someone help me understand what is happening and how to fix it?

  Thank you-

  Mary

  If you see a picture frame in the preview, but not in the exported file, I think that you have driver video card problems.

  If you go into Photoshop preferences > Performance and uncheck 'Use Graphics Processor', the problem goes away?

• Problem with the links and libraries CC

  Dear forum

  I have a problem that can be solved, hopefully, I see myself as a new user of Indesign and help would be appreciated.

  Since the update to the new version of Indesign, I had a problem when I open multiple files and all the links are missing. These are stored in the CC library in more than a library,

  After attempting to repeat the assets, I get the following message.

  

  I made a copy of the file and open this file without result

  I think it's a question of libraries CC because it seems that the library is unable to find the file, but not 100% sure here, just a guess.
  I am connected to AdobeCC when the message above

  I hope someone can help

  Thank you

  Note: no files where changed or moved the location, including the CC library during the update of Indesign.

  When you have problems with the CC libraries, this often solves the problem:

  Go to the creative cloud desktop application (found in the Menu bar on Mac, the task bar in Windows). Click on the "gear" icon > Preferences > General. Logout, then signed again with your Adobe ID