Problem with the paragraph

Similar Questions

• Problem with the paragraph in CS3 mac Styles

  I was wondering if anyone can help. I have a number of documents that have been created with paragraph styles by using a font that has disappeared from my machine. Now when I open my documents they look right. I changed the paragraph style in one of the documents to use a different font and now it looks fine, but all my other documents look bad. Is there anyway to set all my documents to use the updated paragraph style or will I have to change them all manually?

  There are several ways to go with this. We need to put all the files in a book,

  temporarily and being one with the correct as style definition the value the

  source, and then synchronize the paragraph styles. This will change all THE styles

  with the same names across all documents and add styles

  are present in the source, but not in any other files, so it's a bit

  risky, especially if any models are based on or [base

  Paragraph] itself is used in one of the files, and it is not already defined

  exactly the same thing in all the files.

  You can also open any file and go to the paragraph Styles Panel menu and

  Choose the command charger load styles, and then select the style you want to load, and how

  dealing with conflict (incoming use), which will give you more control over what

  is happening.

  Or whenever you open a file and get the warning of missing fonts, you can go

  Find font and select the missing font, then pcik your substitute, check the

  redefine the styles box, and then click all change. It would be probably the best

  choice since it is not the style names to make the correct changes.

• Problem with the paragraph style "paragraph NET."

  I have a paragraph style with a paragraph in her net. There is something that I don't know what to do about it.

  When I hit 'back' to move a paragraph with this style, it leaves a rule in its wake. Here is a screenshot:

  

  The title "Introduction" has a paragraph with a net of applied paragraph style. I put the cursor just before the word 'Introduction', press return, and it leaves a line in the previous line. Weird huh?

  Don't use not paragraph refers ALWAYS to put in place a space between paragraphs. Use the space before or after the space in the paragraph in withdrawal and spacing Style.

  If it's the beginning of a block of text and you want it to appear lower in the frame adjust them the object > text frame Options and give him a Medallion from the top. OR this way http://indesignsecrets.com/push-down-the-first-line-of-text.php

  The line of paragraph appears is because when you press back the paragraph he the same paragraph style, ergo the same paragraph style. To get rid of it, change the paragraph style from the paragraph above to something else.

  But you shouldn't really use back to add a space between paragraphs. Space before and after the space are much more effective.

  http://blogs.Adobe.com/indesigndocs/2009/05/5_typing_rules.html

  http://creativementor.com.au/adding-space-after-paragraphs

  http://help.Adobe.com/en_US/InDesign/6.0/WSa285fff53dea4f8617383751001ea8cb3f-6dcea.html

• I had a few problems with the search engines and history

  My default search warning back to Yahoo after a reset on my computer. Close Firefox keep one to change but by restarting the computer, it takes.

  I can't open the sidebar history. The option "view the history of your" opens its tab fine (the drop-down menu that says 'Show History Sidebar', 'clear recent history... ("ect.). But, when you click on the "Show History Sidebar", nothing comes. Can I use the "Show history" option, but the sidebar does not open for some reason any.

  I just finished with a complete analysis of the Microsoft Safety Scanner and it said not that there is anything wrong. I have not reset the computer again to see if something has changed although after the factory reset (see the 2nd paragraph) it seems returned to Yahoo (search engine he kept going to happen).

  I open the history tab in the menu of the toolbar, and everything seems fine here. I also had him always use private off all first browsing mode. After activating the option clear history when Firefox closes, I ended up having to reset to factory settings (things he saves were saved isn't really a problem) that doesn't seem to fix the problem with the sidebar of history not to come.

• Problem with CS4 paragraph indentation styles

  Problem with CS4 paragraph indentation styles: specificities of the indentation suddenly APPEAR differently but reading the same thing (in the paragraph style palette) on page 5 to 6 and beyond. (He has no character style applied to text and no change to the page margins. The same master page is applied to all.) On page 5 when I pull the box down, the type is indented correctly, but when I flow on page 6, it goes to a different print and looks bad for the style.

  Both frames have the same applied object style? Have you checked text to overlay text block options?

• I work in InDesign CS5 and have a problem with the panels on the right. Some of them are empty. Ideas?

  I work in InDesign CS5 and have a problem with the panels on the right. the panels color chart, paragraph styles, and totally blank menus link. I pulled upward from publications that I already worked on and they are still virgins. I tried to load styles from other pubs, ID, and that does not work either. I can see them when I go to create a new style and use BASED on function.

  Any ideas?

  Try to restore your InDesign preferences. Here's how:

  FAQ: How to reset or 'trash' preferences?

• Help. Very stupid problem with the placement of word files.

  As you can see I am a beginner total to Indesign. I don't know how but I can't place any text imported from Word into my project. Weird thing that if I create a new document it works. However, in this project I've done a lot of styles and other things so I don't want to start from scratch, so the question is:

  Is there some option "I accidentally the entire project" and is anyway to fix it. [Or maybe export styles and master pages to another document?]

  The problem with the placement of text word said that the text is too big (Red Cross).

  InDesign CS6 30 day trial.

  Post edited by: Niebieski_Mak

  Ok.

  There are a number of possibilities for what are the causes of the text immediately became excessive. Is usually only a problem with a youove of added restrictions that makes a too wide to fit in the frame line (but it can also occur if you have a set of "keep the option" which requires the text to stay together and there is inusfficient space to hold all the lines, or requiring that the text starts on an odd page / hand and the one you have is wrong).

  The most common cause is probably the wrong application of the No. Break attribute. New users sometimes confuse this to how to disable hyphenation, but in fact it prevents any text to which it is applied to break even between words. Next most common, I think, is a long text string with nonbreaking spaces between the words (I see a lot of this in Word documents), and not allowing not standard, yet once, there are no place to get out.

  I've also seen cases where the format for the text calls for a font size of very large size, which makes it impossible to fit the text, or when the dashes from left or right, in the paragraph style, override local formatting or text block options, are too large to allow the text to fit.

  The best way to find out, in my opinion, is to choose the frame then go to Edition > edit in story editor, you can see and select the text and check these things.

• I have problems with the text... Help

  Hey

  I have problems with the text box in indesign cs4...

  When I do a text frame and write a short text and want to make a new line and press ENTER, my cursor goes to the next page and the small red cross in the corner of my document apears.

  someone knows what to do here?

  I realle need your help

  Thank you

  This has been covered a lot. A BIOS update may be an option to solve the problem of keyboard mapping, you can change your keyboard shortcuts to reassign the digital keypad input to be a paragraph return or you can try simply by changing the State of the numlock - if it is on, turn it off and vice versa. Withthis problem most of the systems that seems to change the function of the two keys back and forth between the enter alpha and entry number.

• Anyone having problems with the new iPhone LTE connection 7 on Verizon?

  I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

  (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

  (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

• Sierra Siri, «I have some problems with the connection...» »

  Guys,

  I just installed Sierra on my MacBook Pro (retina, 13 inches, early 2015) version 10.12. I can't get Siri at work, the app tracks, he hears what I'm saying, but after awhile, he returns with two messages, both on the screen and verbally "I have some problems with the internet connection. Please try again in a moment. "&"Sorry, I'm having problems with the connection. Please try again in a moment. »

  Any ideas?

  Thank you

  N

  It's a network problem.

  Check the proxy settings that blocks maybe, or a firewall.

  System Preferences > network > Advanced (for your current connection) > Proxies

  Something there?

• Siri does not (problems with the connection)

  Hello

  I installed macOS Sierra yesterday. Everything seems to work fine, except Siri. With Siri I always get an error message "I am having some problems with the connection. Please try again in a moment. ». But this seems to appear every time. The network connection works fine, I can't access the Internet without problem.

  No idea how solve the problem?

  I use an iMac (27 inch, mid-2011). Internal microphone is connected, I also see the 'waves' change while I am speaking.

  Concerning

  Thomas

  Hey, thochstrasser. Thank you for using communities of Apple Support.

  It seems that Siri is reluctant to make his debut on your iMac after upgrade to Mac OS Sierra. I want to make sure that you get the benefit of this new feature on a Mac.

  1 try safe mode if your Mac does not start -even if your iMac to market, safe mode makes sure it starts successfully.

  2. How to test a question in an another user account on your Mac - since this is most likely a software problem, test to another user will indicate if it is right to your user account or throughout your system.

  3. use Time Machine to back up or restore your Mac - if it seems to be systemic, the next step should not cause problems. But it is always better "to have" a backup to the "need".

  4. on OS X Recovery - the issue as part of the operating system, reinstall should do.

  Have a great weekend!

• iOS 10 problems with the Mail application

  Dear Apple and community support,

  Here's my problem:

  I have upgraded to iOS 10 on my iPhone 5s this afternoon (September 13), and now I'm not able to open e-mail - Yahoo!, and Gmail. I can receive emails, I'm not able to view the body of these emails. When I press on them, all I see is a blank white page. I can't answer emails either. I can only their flag or remove them. However, I am able to compose new e-mail messages.

  Here are the steps that I've taken to try to solve my problem:

  1. Restarted my phone
  2. Remove and re-add my Mail accounts
  3. Made a backup and a restore full while that plugged into my laptop with the latest version of iTunes.

  I should be grateful if you would help or more information on this issue.

  Thank you

  Emily

  I also have problems with the Mail application.  On my iphone, ipad, and Mac Pro.  I have several addresses, a MSN, another on Go Daddy and Gmail.  I have various weird problems with threads and every day he re-charge my emails, like if I have never read before.  Something is really problematic with Mail.

  Can the people of APPLE, you help me?

• Problem with the installation of iOS 10

  I tried to install iOS 10 earlier but it did not work, so now that I'm trying to reinstall iOS 9 if my phone will work again, if this does not work I have to reset my phone (but I am a fool and did not a back-up because I never had a problem with the software updates in the past if all data will be lost).

  < published by host >

  The same problem with me too. After installing ios 10 nuer OTA my iphone brick! I'm trying to re - install ios 9 i-Tunes, but 2 hours now always stop installation... what happent?

• Hello! Someone has some problem with the haptic on Macbook 12 "2016 function? It does not work on my Mackbook.

  I'm trying to figure if someone has my problem with the haptic on Macbook 12 "2016 function. The option is checked in the preferences system, but it does not work.

  Thank you

  Hello luigi10m,

  Thanks for posting on the Community Support from Apple. From your post, it looks like your haptic feedback does not work when you click using your trackpad and the setting is enabled. I know that this is a great feature and it is important to make it work. I'll be happy to help you.

  First of all, I would like to assure you that in system preferences > Trackpad > clicking silencer is not checked, that might help. In addition, it would be useful to reset the settings of the SCM. You can find instructions here: reset the management system (SCM) controller on your Mac - Apple Support

  I'll also include those for you here:

  1. Stop the Mac.
  2. Plug the MagSafe or USB - C adapter to a power source and to your Mac.
  3. Use the built-in keyboard, press shift-control-Option on the left side of the keyboard, then press the power button at the same time.
  4. All the keys to unlock, then press the power button to turn on your Mac

  Take care!

• I have a problem with the content of spam. Somewhere in the Fox appeared script that's choking me audio spam. Every 30 minutes he's playing an audio clip that is malicious.

  Hello.
  I have a problem with the content of spam. Somewhere in the Fox appeared script that's choking me audio spam. Every 30 minutes he's playing an audio clip that is malicious. I can't find the settings as it eliminated. Now, I don't have any plug-ins and Add-ons strange that were not initially in the Fox, but the problem is there.
  I use the Fox years. The problem, he had 1.5 months after Fox cleaning. If the problem can't win, I'll be forced to give up the browser, and I wouldn't.

  Could test you mode without failure of Firefox? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

  Does not work if Firefox: Hold down the SHIFT key when you start Firefox.

  If Firefox is running: You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  and OK reboot.

  Two scenarios: A small dialog box should appear. Click on 'Start mode safe' (not update).

  Any improvement?

  If the problem persists in Mode without failure, could reinstall you Firefox in this way:

  Clean reinstall it

  We use this name, but it isn't about deleting your settings, this is to ensure that the program, files are clean (not incompatible, corrupt or exotic code files). As described below, this process does not disrupt your existing settings. Don't uninstall NOT Firefox, that does not need.

  (1) download a fresh Installer for Firefox 38.0.5 of https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).

  (2) close Firefox (if applicable).

  (3) to rename the program folder, either:

  (Windows 64-bit folder names)

  C:\Program Files (x86)\Mozilla Firefox
  

  TO

  C:\Program Files (x86)\OldFirefox
  

  (Windows 32-bit folder names)

  C:\Program Files\Mozilla Firefox
  

  TO

  C:\Program Files\OldFirefox
  

  (4) run the installer you downloaded in the #1. It should automatically connect to your existing settings.

  Any improvement?

  Note: Some plugins can only exist in this OldFirefox file. If it is missing something essential, present in these files:

  • \OldFirefox\Plugins
  • \OldFirefox\browser\plugins