Problem with the series L of Satellite - black screen startup

Similar Questions

• Problems of crash with the series Aspire V Nitro Black Edition VN7-791

  Good so I got a nitro V Aspire as a gift at Christmas time and was pretty excited about it but there was a lot of problems with it. From the first day I got it, it crashed when running a game on high graphics. This problem persisted six months as a market shutdown problem. What happens in general, is running the game sort of lag, juttering even using the Nivida graphics, then the screen will cut to black and it turns off. If I hit the power, but it turns red lights under the keyboard for a fraction of a second but turns then off. It usually takes about 20 minutes for the laptop computer to actually turn it on again.

  It becomes just more boring as the days go by, someone else has this problem and if so how do solve you this problem?

  Hello

  You are of course is a temperature problem? It's a 791G, so it is larger than the 591G and he shouldn't have any problems of limitation. Have you tried to monitor your temperature, frequency of the CPU clock, CPU and GPU use? You should do this before assuming that is might be a temperature problem. Also are running your fans?

  If you are certain that it is a problem of temperature and your fans to operate as it is expected that you can try to use a coolingpad and change the thermal paste on the CPU and the GPU. This last suggestion will definitely improve the problem.

  However, I quite doubt it's a CPU/GPU temperature problem because in the first place it would throttle and not sudden turn off your computer. They have a lot of build protection against overheating and stopping suddenly to protect components is the last option of these protection mechanisms. Honestly, I expect that you have some sort of other problem or for a reason, that your fans do not work correctly, or you have a lot of dust in the cooling system.

  I use my 591G (4720HQ and 960M), and even when I do intense Bioinformatics (using the GPU for the calculation of all cores of CPU, at 100% use) I never had the problem with the stop suddenly. And believe me no game can put such stress on your phone except comparative analysis of the applications. I have problems with regulating heat, but never had a problem with the sudden stop and is a smaller laptop with less space, so smaller air flow and worse cooling than the 791G that has the same configuration.

• Error message "A problem with the cooling system" on Satellite A660

  Hi all

  Hope I can get help here. I got about 5 laptop computers HP after each of them had problems and errors. I got sick of them and so got a refund and bought a high spec A660-1FH.

  The A660 is a great laptop for two days until yesterday when I started having a saying of warning message "a problem with the cooling system has been detected. Please turn off the power immediately and return it for service "."

  The cpu fan works fine you can here it turns and the temperature of the processor i5 - 460 m is around 40 degrees for two hearts - that seems normal to me. I noticed that this happens only when running on battery, and if you switch from eco utility to the power saving mode. Its fine when running on the "balanced" power setting The fan is louder before when this message appears.

  Like its less than 28 days my retailer swapped it for a brand new immediately. Got a new home page, and the same message reappears. Everyone knows this. Like two laptops had this, I was wondering if it is normal that the laptop A660 series or if it was really a hardware problem?

  I tried to update the eco utility and the bios of the laptop, but the two are the latest versions. Can someone help or share if they have a similar problem with their laptop?

  Thank you

  In front of me, I have Satellite A660-13 q (PSAW3E) and I have about 6 weeks now. It works almost 10 hours a day and so far I didn't notice this message or anything that may be suspect for the operation of the equipment.

  I put really know why this happen on your laptop and don t think that there is nothing you can do about it.
  I would trade it again. What you can also try is to contact the closest service Toshiba. Make a call, explain the situation and ask if they can help you with this.

• Problem with the software Modem on Satellite Pro L40

  I tried to set up a connection Dial-Up Networking on a Satellite Pro L40 running Vista and can't get the modem to talk to the modem from the ISP. The connection appears OK and then you can hear the modem dial, but when the ISP picks up there is a bit of yelling and then my modem abandons the connection and I get the standard vista connection failed box.

  Things I've tried:
  -latest drivers for the 2.1.77.0 modem (and the rest of the system) downloaded from Toshiba and installed OK
  -all the updates of windows installed
  -removal of the modem in the Manager of peripherals and re - install
  -suppression of the agrsmdel.exe and then re-install
  -try different cables to plug into the phone jack
  -several different ISPS and phone numbers
  -reduce the maximum speed of the connection
  -connection to the same ISP with my Satellite L10; works very well never have time!
  -using the windows to diagnose and repair the tool (set last resort!); says that the modem works fine and can not find a problem with the connection

  Is it possible that the update of the BIOS on the laptop would make a difference (currently v 1.60)? I did some research on Google and found messages on various forums, which suggests that the connection between the motherboard and the modem chip is a little doubtful for all the Agere Soft Modem; If the case is it something I can fix myself or I should go for warranty repair?

  Midders

  Hello

  I'm sure that there is no problem with your modem, but with the configuration or even s ISP modem. I recommend you to speak with the support of the ISP.

• Problems with the installation of recovery - Satellite A300D - BSOD

  Hello

  The laptop in question (TOSHIBA Satellite A300D) recently stopped starting (BSoD).

  So, I tried using the recovery disk, but there is no help. What happens is:
  -After about 10 minutes of waiting, the first language menu load, so I click on "next".
  - Then I again click Next and accept the message that my HARD drive will be erased
  - Then I see a cmd prompt that says "try to remove all the letters of partitions possible...". »
  -There is also a minimized command prompt that says something like "RAID failed to initialize."
  -And then nothing happens.

  Is this a hardware problem? I also tried a full installation (instead of recovery), which, even once, is simply not. None of the errors is - it just freezes.

  Any help appreciated.
  Thank you.

  It is not easy to tell what can be the problem, but if you were not able to install the OS by using two different facilities CDs/DVDs, so there must be a problem with the HARD drive.

  The warranty is still valid?
  I mean you can contact the nearest Toshiba authorized service provider and explain the situation. They can swap the HDD and again test the recovery procedure.
  Can you get somewhere 2,5 SATA HDD for testing?

• Problems with Windows 7: Internet Explorer and black screen

  I recently took my old Acer Aspire laptop 8375 from the dead. If I remember correctly, it is from 2008 and has Windows 7 installed on it. When I try to start my PC, everything's fine until it connects to the account. Suddenly, a black screen will appear with a message saying: Internet Explorer has stopped working. I have tried different methods: looking for online solutions (did not work, window closed without results), open the Task Manager and IE (did not work), trying to open other applications didd work tho, but my google chrome didn, t work as well running. I forgot to mention, I could use my cursor on the black screen. Could someone help?

  Hello Kent,

  Thank you for your response.

  I appreciate your time.

  If the computer boots to the office, you can use the steps described in this article and check the problem with Internet Explore.
  Reference:
  What to do if Internet Explorer does not work
  http://Windows.Microsoft.com/en-us/Internet-Explorer/IE-crashes-stops-working#IE=ie-11-win-7

  Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  Please keep us updated.

  Thank you

• Problems with the graphics card on Satellite Pro M10

  Hi, this is my first post on the forum. I'm not a pro with computers or anything... the problem I have with my laptop is similar to the one in this thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26849&TSTART=0

  I spent half the day trying to figure out if my graphics card is broken, but since I'm a newbie with this stuff, I'm still not sure. :(

  This is what makes my M10. I'm trying to describe the symptoms that detailed as possible, but I'm German, so please excuse my lack of words in some places.

  1. when I turn it on, the laptop goes through the BIOS and give me scrambled BACK-screens and a slightly Warped windows loading bar. There is the consistency check, marked by black bars connecting the top of the screen down. After the audit, the screen goes black and nothing happens, or the screen of will just show me consistency check, do nothing. Be that as it may, I have to turn off the power (I think) and restart the laptop.

  2. sometimes the laptop goes through the BIOS checking & conistency with a few graphical shortcomings. The office is anything but shredded when he gets to the screen of the Windows user. The static method is if serious I don't even know where is the button turn off.

  3. sometimes Notepad starts very well, with the only graphic problem being the windows loading bar. When I go into Windows, the laptop pulls me a blue screen and stops immediately.

  4. sometimes, the laptop works fine for about an hour or two. After I rebooted, I have the same problems listed above, once again.

  5. If I open Device Manager and disable the graphics card, the laptop works very well. I have to lower the screen resolution and colors, but I can watch videos on youtube and everything. Finally, the laptop gets very hot on the bottom and the screen goes crazy again, so I turn the damn thing off.

  I don't know what that means! If my graphics card is broken, the screen should be all static, ALL the time? Not just sometimes more,... could sometimes less be some sort of communication problem between the graphics card and cpu? Please help me with this!

  Another thing I'm not sure about, even after reading the thread I linked above - can I replace the graphics card or not? Everyone said something different in the other thread...

  see you soon,
  Cozmo

  Edit: maybe I will add when I got the screen scrambled and everything. I installed Civilization 4, just to check if my satellite pro can handle, and everything went well for a while. The screen then haywire and I rebuilt my whole system, but display problems did not disappear completely. They were gone for almost a month, and now they are 'back' or something.

  Hi Cozmo

  I'm not a technician but here nobody needs technical knowledge to see that there certainly is hardware problem. I also believe that this problem occurs due to the graphics card. Graphics card is part of the motherboard and it cannot be traded separately. The entire motherboard must be exchanged.

  In my opinion, you have two options: either contact the authorized service provider in your country and speak with them, what can be done, or try to get the motherboard used. If you are lucky, you can find it on eBay. I already bought several hardware components for my old Satellite P10 on eBay.

  Sorry Cozmo but I do not see any other logical solution for you.

  Good luck!

• Problems with the series of PC wireless driver laptop Toshiba 200

  Dear friends,

  I need your help. I have a laptop Toshiba series 200, Vista operating system, and I encounter the following problem:

  From time to time, without thread in my laptop disappear (the light goes out and the wireless adapter disappear from the list), the wireless connection is lost, and I have to restart my computer several times to recover the pilot. Sometimes even by restarting the computer does not resolve the problem and I download the driver on the Toshiba web site but then I must perform the installation of several times before I can do the job.

  I called Toshiba helpdesk and told me that it is a known problem with Toshiba and that they do not have a solution.

  Do you have any suggestions?

  Thanks in advance

  Kind regards
  Antony

  Hello Anthony

  I don't know which series of laptop Toshiba 200 you have but I use Satellite P200 almost a year now and WLAN works perfectly.
  Can you please tell me what model of laptop you have exactly?

  Sorry but I do not believe you have received this statement from Toshiba helpdesk.

• Problem with the video card and satellite L650 - 1 M 6

  Good evening!
  I have the new Satellite L650 - 1 M 6 with no operating system. When I did a fresh install of Windows 7 32 bit, I had several device problems. Most of them that I managed solve my self (as wlan drivers) but now I need your professional help.
  At this moment, I had left this problem of devices (on the information system):

  Not available ACPI\TOS6205\4 & 4A257CF & 0 the drivers for this device are not installed.

  I think it might be the video card (must be ATI HD5470) but SysInfo says:

  Type available, compatible adapter (Standard display types)
  Description Standard VGA Graphics Adapter adapt

  Would appreciate any help on this.
  Thank you in advance.

  Hello

  As I see you as laptop without OS and you try to install and configure your own operating system.
  In many posts, I wrote here that I write again and again that the most important thing is to install all the drives and Toshiba specific stuff according to the order of installation right then, here's the order of installation for your laptop model:

  Win7
  TOSHIBA Assist 3.00.10_O
  TOSHIBA Extended tiles for Mobility Center Windows V1.01
  Synaptics Touch Pad Driver 15.0.8.1
  Realtek 6.1.7600.30111 card reader
  V2.0.0.6 TOSHIBA HW Setup Utility
  V2.0.0.3 TOSHIBA supervisor password utility
  TOSHIBA Web Camera Application V1.1.1.15
  TOSHIBA HDD_SSD 3.1.64.6 attention
  SW 9.1.1.1024 Chipset installation utility
  Intel Management Engine Interface 6.0.30.1203
  Display driver
  Driver Intel Turbo Boost Technology 1.1.1.1007
  Driver Intel Rapid Storage Technology 9.5.7.1002
  Conexant Audio Driver 4.119.0.61
  TOSHIBA value added package 1.3.3_64
  LAN driver
  TOSHIBA Software Modem 2.2.97 (SM2297ALS05)
  Driver for Conexant Modem 7.80.4.50
  Battery Bluetooth for Windows by Toshiba v7.10.10 (T)
  Wireless LAN driver
  ConfigFree 8.0.29

  I recommend reinstall you Win7 and continue with all the other stuff flowing this install order and I hope everything will be OK.

• Problem with the series of read/write

  Hi all

  I don't know if this belongs here or on one of the guidance material, but I thought I would start here.

  I have two devices which I am currently trying to contact via the serial ports on a PXI chassis in real time.  In both cases, I series of software that seems to work fine when I use the serial port on the controller (for example, COM1).  Now, I have two cards that I used two different systems to talk to these devices - 8430/2 and 8430/4.  In both cases, when I use these cards, it seems I have periodic in response by devices delays when you use the same code that I use when talking through the serial port of the controller (i.e., I get some downtime when trying to read code error-1073807339).  I tried to Exchange cards with spare parts, but I have the same problem.  I can handle the delays to retransmit the command, but this destroys ultimately the determinism of the system given that the delay may create a pause of up to 2 seconds.  I tried to change the size of the buffer, but I seem to have the same problem.  Does anyone have any ideas as to what could happen?

  Cheers, Matt

  Thank you, Luis.  Indeed, one of the errors being thrown was a timeout error (the other was thrown by one of the devices indicating that he did not understand the command sent).  However, the problem wasn't that I was getting a timeout, but rather that I was getting an error on one platform and not on another.  But it seems that I solved my problem - I simply set the I/O VISA Write mode to synchronous and this seemed to solve the problem I had.

  Cheers, Matt

• I have a problem with the BIOS update. Satellite A20-S103

  She asks "Plug adapter AC." but II use my laptop with power supply only. And I have not adapter how can I install and upgrade my wood someone has idea?

  Model satellite A20-S103.

  I have 1.10 BIOS already I need 1.40

  [Edited by: admin]

  Hello

  as you wrote everything should work!

  The drums plugged in when you did the update to the BIOS?

  Are you using the original power supply?

  Do you use the Toshiba Power Saver? If so, set it to default!

  Rudi Bye

• Problem with the Broadcom BCM70010 on Satellite P200-123 video decoder

  I ran the Broadcom DiagTool.exe, getting several shortcomings, including the Version Compatibility Test.

  It's on a Satellite P200-123 part number: PSPB6E-02L028EN, Vista Home Premium 32-bit.

  Says Vista Driver version 2.14.4 Device Manager & "this device works correctly.

  Version 2.14.4 is the only Decoder driver Broadcom available on the Toshiba for Satellite PSPB6E-02L028EN site.

  I wonder what to try next.

  Thanks for any help.

  ================================================== =====================================
  Broadcom high definition video Decoder Utility.
  2009-12-11 11:12:50

  ----------------------------------------------
  Details of the software.
  Product version: 2.6.40.1
  Driver version: 2.14.0.4
  Library API Version: 2.17.0.0
  Firmware Version: 2.14.7.1 / 0.0.0.0

  ----------------------------------------------
  Details of the material.
  Name of the decoder: BOUZHAM 970010
  Room type: Mini PCIe Card
  Review ID: 0x31B000FB
  Serial number: n/a

  ----------------------------------------------
  Results of the tests.
  Version compatibility test: fail.
  Registered control Test: pass.
  Non Volatile Memory test: not support on bulldozer.
  DDR memory test: pass.
  FW download Test: pass.
  DMA entry Test: fail.
  DMA Test output: failure.
  DMA CRC Test output: failure.

  ================================================== =====================================

  Hello

  Laptop manufacturer is obliged to support the Broadcom DiagTool?
  What Broadcom support on this issue? Have you contacted their support?

  I mean they have to have the best experience with own products. It has probably been tested on different hardware platforms for mobile computing.

• Problems with the online games on Satellite A300

  I recently bought an A300 Toshy under Windows Vista Home Premium and it cannot find all the games to play online.
  I opened all the ports that are correct and I can connect to the internet fine, but I never see all the games in a hall online.
  I tried to cs: source, warcraft 3 and the 2 Team Fortress and none show all games when searching online.

  My guess is it's a network problem, but I have no idea what, anyone have any ideas?

  Hello!

  You have internet security software or firewall on your laptop installed? This could block the games so check that!
  Also, make sure that Windows Firewall doesn't block games.

  In addition, you should check if you have Service Pack 1 for Windows Vista installed.

  Good bye

• Problem with the CD/DVD on Satellite A300D (PSAK0E) device

  Hello

  I installed Windows XP Home edition on my laptop yesterday, everything was fine, but now I can't use the CD unit at all. It does not open, and when I open it manually (with a clip or something like that) the device does not read the disk in it.

  Any idea?

  Thank you for your attention and your time.

  Post edited by: Indie

  Hello

  STI's optical disc drive listed in the Manager of devices or Windows Explorer?

• Problem with the electric guitar and Satellite A100-906

  Hello

  I get a strange sharp sound of my guitar amp speaker when I try to play starting from the monitor of my laptop. Is this normal? I used to play in front of a screen LCD LG and everything was nice and quiet.

  However a few minutes ago, I discovered the FL inverter, which exists in the monitor to my laptop and was not on my LCD. FL-ups would cause this noise to my guitar? I want to emphasize that I can not hear the sound of my monitor. I can only hear it through my guitar and the amplifier speaker microphones.

  I hope you understand my problem.
  Looking forward to a response!

  Thank you
  Nikos

  Hello

  I n t have guitar and can't be 100% sure about your question, but perhaps you need a sort of Notebook Surge Station and noise filter. Google a bit and look for info on this filter.