Problem with the Broadcom BCM70010 on Satellite P200-123 video decoder

Similar Questions

• Problem with the software Modem on Satellite Pro L40

  I tried to set up a connection Dial-Up Networking on a Satellite Pro L40 running Vista and can't get the modem to talk to the modem from the ISP. The connection appears OK and then you can hear the modem dial, but when the ISP picks up there is a bit of yelling and then my modem abandons the connection and I get the standard vista connection failed box.

  Things I've tried:
  -latest drivers for the 2.1.77.0 modem (and the rest of the system) downloaded from Toshiba and installed OK
  -all the updates of windows installed
  -removal of the modem in the Manager of peripherals and re - install
  -suppression of the agrsmdel.exe and then re-install
  -try different cables to plug into the phone jack
  -several different ISPS and phone numbers
  -reduce the maximum speed of the connection
  -connection to the same ISP with my Satellite L10; works very well never have time!
  -using the windows to diagnose and repair the tool (set last resort!); says that the modem works fine and can not find a problem with the connection

  Is it possible that the update of the BIOS on the laptop would make a difference (currently v 1.60)? I did some research on Google and found messages on various forums, which suggests that the connection between the motherboard and the modem chip is a little doubtful for all the Agere Soft Modem; If the case is it something I can fix myself or I should go for warranty repair?

  Midders

  Hello

  I'm sure that there is no problem with your modem, but with the configuration or even s ISP modem. I recommend you to speak with the support of the ISP.

• Problems with the installation of recovery - Satellite A300D - BSOD

  Hello

  The laptop in question (TOSHIBA Satellite A300D) recently stopped starting (BSoD).

  So, I tried using the recovery disk, but there is no help. What happens is:
  -After about 10 minutes of waiting, the first language menu load, so I click on "next".
  - Then I again click Next and accept the message that my HARD drive will be erased
  - Then I see a cmd prompt that says "try to remove all the letters of partitions possible...". »
  -There is also a minimized command prompt that says something like "RAID failed to initialize."
  -And then nothing happens.

  Is this a hardware problem? I also tried a full installation (instead of recovery), which, even once, is simply not. None of the errors is - it just freezes.

  Any help appreciated.
  Thank you.

  It is not easy to tell what can be the problem, but if you were not able to install the OS by using two different facilities CDs/DVDs, so there must be a problem with the HARD drive.

  The warranty is still valid?
  I mean you can contact the nearest Toshiba authorized service provider and explain the situation. They can swap the HDD and again test the recovery procedure.
  Can you get somewhere 2,5 SATA HDD for testing?

• Error message "A problem with the cooling system" on Satellite A660

  Hi all

  Hope I can get help here. I got about 5 laptop computers HP after each of them had problems and errors. I got sick of them and so got a refund and bought a high spec A660-1FH.

  The A660 is a great laptop for two days until yesterday when I started having a saying of warning message "a problem with the cooling system has been detected. Please turn off the power immediately and return it for service "."

  The cpu fan works fine you can here it turns and the temperature of the processor i5 - 460 m is around 40 degrees for two hearts - that seems normal to me. I noticed that this happens only when running on battery, and if you switch from eco utility to the power saving mode. Its fine when running on the "balanced" power setting The fan is louder before when this message appears.

  Like its less than 28 days my retailer swapped it for a brand new immediately. Got a new home page, and the same message reappears. Everyone knows this. Like two laptops had this, I was wondering if it is normal that the laptop A660 series or if it was really a hardware problem?

  I tried to update the eco utility and the bios of the laptop, but the two are the latest versions. Can someone help or share if they have a similar problem with their laptop?

  Thank you

  In front of me, I have Satellite A660-13 q (PSAW3E) and I have about 6 weeks now. It works almost 10 hours a day and so far I didn't notice this message or anything that may be suspect for the operation of the equipment.

  I put really know why this happen on your laptop and don t think that there is nothing you can do about it.
  I would trade it again. What you can also try is to contact the closest service Toshiba. Make a call, explain the situation and ask if they can help you with this.

• Graphics problems in World of Warcraft on Satellite P200-123

  I bought a Satellite P200-123 to surf the net, play and for general use. I have read many reviews and chose the p200-123 because of his good grades. I play wow on a daily basis. World of Warcraft was an extension called burning crusade that came out a couple of years. When the expansion of BC the grx will all mess. Its as if there is a new effect of grx etc which does not agree with the toshiba range drivers. I get lots of polygons on the screen after being in the Burning Crusade expansion. I thought the grx was defective, so I exchanged it. Once again when I get the new laptop at home it happened again. It is a driver problem that it happens to the expansion of the BC. Ive tested it on other games and everything works fine. I want to know is we're going to have a bad selection of drviers or will they get updated.

  http://I219.Photobucket.com/albums/cc215/maltonbranch/WoWScrnShot_033108_213654.jpg

  To solve this problem, I have to change the resolution, then back to the setting I use. problems with polygons etc seems to leave for 5 minutes then the pips apear. I thought he could heat or a damaged GPU. But getting a laptop brand new just to do it again shows me his non-defective material and a driver problem.

  Ive posted this on world of warcraft forums and aparantly its a problem with the ATI driver toshiba shut down. Bottom line, I want to know if the drivers will be updated and not just old ATI modded those of toshiba. I feel ripped off the coast. In all my years of owning PCs and laptops, I never felt so disappointed by a company in terms of software support.

  Hello

  I understand you completely, especially when you play with a few new engine that requires pilots who work quite at 100%.

  Maybe you should check some 3rd third-party drivers.

  This driver have been adjusted for mobile systems, so when you try these, your problem should go away and performance are expected to increase a little.

  Welcome and good luck

• Problems with the graphics card on Satellite Pro M10

  Hi, this is my first post on the forum. I'm not a pro with computers or anything... the problem I have with my laptop is similar to the one in this thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26849&TSTART=0

  I spent half the day trying to figure out if my graphics card is broken, but since I'm a newbie with this stuff, I'm still not sure. :(

  This is what makes my M10. I'm trying to describe the symptoms that detailed as possible, but I'm German, so please excuse my lack of words in some places.

  1. when I turn it on, the laptop goes through the BIOS and give me scrambled BACK-screens and a slightly Warped windows loading bar. There is the consistency check, marked by black bars connecting the top of the screen down. After the audit, the screen goes black and nothing happens, or the screen of will just show me consistency check, do nothing. Be that as it may, I have to turn off the power (I think) and restart the laptop.

  2. sometimes the laptop goes through the BIOS checking & conistency with a few graphical shortcomings. The office is anything but shredded when he gets to the screen of the Windows user. The static method is if serious I don't even know where is the button turn off.

  3. sometimes Notepad starts very well, with the only graphic problem being the windows loading bar. When I go into Windows, the laptop pulls me a blue screen and stops immediately.

  4. sometimes, the laptop works fine for about an hour or two. After I rebooted, I have the same problems listed above, once again.

  5. If I open Device Manager and disable the graphics card, the laptop works very well. I have to lower the screen resolution and colors, but I can watch videos on youtube and everything. Finally, the laptop gets very hot on the bottom and the screen goes crazy again, so I turn the damn thing off.

  I don't know what that means! If my graphics card is broken, the screen should be all static, ALL the time? Not just sometimes more,... could sometimes less be some sort of communication problem between the graphics card and cpu? Please help me with this!

  Another thing I'm not sure about, even after reading the thread I linked above - can I replace the graphics card or not? Everyone said something different in the other thread...

  see you soon,
  Cozmo

  Edit: maybe I will add when I got the screen scrambled and everything. I installed Civilization 4, just to check if my satellite pro can handle, and everything went well for a while. The screen then haywire and I rebuilt my whole system, but display problems did not disappear completely. They were gone for almost a month, and now they are 'back' or something.

  Hi Cozmo

  I'm not a technician but here nobody needs technical knowledge to see that there certainly is hardware problem. I also believe that this problem occurs due to the graphics card. Graphics card is part of the motherboard and it cannot be traded separately. The entire motherboard must be exchanged.

  In my opinion, you have two options: either contact the authorized service provider in your country and speak with them, what can be done, or try to get the motherboard used. If you are lucky, you can find it on eBay. I already bought several hardware components for my old Satellite P10 on eBay.

  Sorry Cozmo but I do not see any other logical solution for you.

  Good luck!

• Problem with the series L of Satellite - black screen startup

  Hello

  These last days, I have a problem with my laptop. When I start it, nothing happens on the screen. I hear the process etc. of fans, hard drive, but there is no reaction to the screen. There is only one way to close: take out the battery and adapter.
  When I start it up after the problem, everything works fine.

  Anyone know what it is?

  Thank you

  I read about similar cases. It s really strange, but sometimes it happens
  But usually the BIOS update should contribute to

  You use the latest version of the BIOS?
  If this isn't the case, update with the correct version.

  Greeets

• I have a problem with the BIOS update. Satellite A20-S103

  She asks "Plug adapter AC." but II use my laptop with power supply only. And I have not adapter how can I install and upgrade my wood someone has idea?

  Model satellite A20-S103.

  I have 1.10 BIOS already I need 1.40

  [Edited by: admin]

  Hello

  as you wrote everything should work!

  The drums plugged in when you did the update to the BIOS?

  Are you using the original power supply?

  Do you use the Toshiba Power Saver? If so, set it to default!

  Rudi Bye

• Strange problem with the module memory series Satellite Pro 4300

  I have a laptop Toshiba satellite pro 4300 series with 64 MB onboard + 64 MB Module and I want to upgrade my memory to 320 MB. I bought two ram of 128 MB each. I removed the 64 MB module and I put a 128 MB module into the slot (A) one, but I saw that the total memory is 128 MB again.

  I removed the module again and I put the second module in the connector (A), but I saw that the total memory is 128 MB again. After that, I put the two modules in my notebook (Slot A and slot B) but I see that the total memory is 192 MB. This means that it recognizes each module as 64 MB as opposed to 128 MB. Dose anyone know why this happens?
  And what do I do about it?

  Thank you.
  [email protected]

  Hello

  Well, I put t know why this happens. It seems that the 128 MB modules are 64 MB modules. I know that it of strange but I have only this explanation. You are 100% sure that both modules of memory 128 MB?
  In my opinion, you should check the bars of memory if they have 128 MB.

  Good bye

• Problems with the online games on Satellite A300

  I recently bought an A300 Toshy under Windows Vista Home Premium and it cannot find all the games to play online.
  I opened all the ports that are correct and I can connect to the internet fine, but I never see all the games in a hall online.
  I tried to cs: source, warcraft 3 and the 2 Team Fortress and none show all games when searching online.

  My guess is it's a network problem, but I have no idea what, anyone have any ideas?

  Hello!

  You have internet security software or firewall on your laptop installed? This could block the games so check that!
  Also, make sure that Windows Firewall doesn't block games.

  In addition, you should check if you have Service Pack 1 for Windows Vista installed.

  Good bye

• Problem with the CD/DVD on Satellite A300D (PSAK0E) device

  Hello

  I installed Windows XP Home edition on my laptop yesterday, everything was fine, but now I can't use the CD unit at all. It does not open, and when I open it manually (with a clip or something like that) the device does not read the disk in it.

  Any idea?

  Thank you for your attention and your time.

  Post edited by: Indie

  Hello

  STI's optical disc drive listed in the Manager of devices or Windows Explorer?

• Problem with the electric guitar and Satellite A100-906

  Hello

  I get a strange sharp sound of my guitar amp speaker when I try to play starting from the monitor of my laptop. Is this normal? I used to play in front of a screen LCD LG and everything was nice and quiet.

  However a few minutes ago, I discovered the FL inverter, which exists in the monitor to my laptop and was not on my LCD. FL-ups would cause this noise to my guitar? I want to emphasize that I can not hear the sound of my monitor. I can only hear it through my guitar and the amplifier speaker microphones.

  I hope you understand my problem.
  Looking forward to a response!

  Thank you
  Nikos

  Hello

  I n t have guitar and can't be 100% sure about your question, but perhaps you need a sort of Notebook Surge Station and noise filter. Google a bit and look for info on this filter.

• Problem with the keyboard on laptop NR G50-123

  My laptop is still under warranty of 1 year out of the box and now more of my keys do not work correctly, and also the buttons under the touch pad are also a little dysfunction (only work 75% of the time), I was unable to find that the warranty on my laptop and if these problems are still serviceable. At the moment I'm really short on time so I thought I'd shoot a forum message rather than deal with support at present and possibly spend a lot of time I have so any help would be greatly appreciated.

  THX

  the keyboard and the touchpad buttons that don't work are covered by the warranty, unless you spilled liquid on the unit. Call HP before warranty runs out.

• Satellite C40D-C - problems with the system

  I recently bought an a toshiba satellite C40D-C Series notebook PC as my old satellite - essentially - is dying. After you connect to the internet, I tried to download AVG Antivirus on my computer that I don't have - and never - trust McAfee anti-virus that comes with the computer. Every time downloaded AVG then restart my computer, the computer goes directly into the automatic repair system and doesn't let me do anything but to reset or restore. This has happened even with completely removed McAfee. I've been on AVG directly today (January 15), and they have to do remote set-up for me - with the same results. Yes, I'm aware that McAfee is a selfish cry of a system and refuses to acknowledge any other antivirus, but that this issue happens even with completely removed McAfee shows clearly that it is something that Toshiba has worked in the system. I can't even disable the automatic repair tool. I have to be stuck with a McAfee antivirus which, moreover, does not yet or is Toshiba will make an effort to help solve a problem they caused?

  Why this computer isn't allowing AVG Antivirus work? And why, after each attempt to download AVG, the computer goes to auto repair whenever I shut down or restart? Is this a problem with the system or something, Toshiba has done on purpose?

• Satellite U500-17F: problems with the new HARD drive

  Hi everyone, I got some troubleshooting with my Satellite and a new drive, I bought recently, because that is already damaged because of too many bad sectors. One is a Western Digital Scorpio Black 320 Bg (WD3200BEKT model number). It should be a fast reader but is not with my Satellite.

  After having mounted the drive in the laptop, I ran a new installation (with full disk format} Windows 7 (64 bit) with all the necessary drivers (that I downloaded directly from the Page of Support Toshiba.)

  The problem is that the laptop needs a lot of time to start and also to disable, and whenever I try to run an application or start a program (for example Firefox, or just a few windows applications), the laptop freezes for about 30 to 60 seconds, the drive no longer works (you can hear leaders put in position 'parking' and the HDD LED control is constant) ", no lights flashing).

  It seems that the drive (during this 30-60 seconds) in something as a stand-by mode. I ran a few Western Digital diagnostic tools and the car looks all right to 100%. It works also without any problems in the other laptop (HP Pavilion DV6500). Could this be a problem with the controller (Intel ICH9M - E ATA AHCI controller) driver?

  Any suggestion?
  Thanx

  Hello

  You use the latest version of the BIOS?
  Please check if you need a BIOS update. Of course I read in a few discussions on the similar question of Win XP you use Win 7 but its value to check the update of the BIOS and U500 series.

  In addition, I recommend check you the power of Windows 7 options.
  Disable in the power profile that you use power saving HDD.

  Just a question:
  You use the option AHCI in the BIOS?
  As far as I know it of possible to use either a compatible SATA AHCI mode.
  AHCI must be used because this option would use full SATA performance.