Problem with the CD/DVD on Satellite A300D (PSAK0E) device

Similar Questions

• Problems with the installation of recovery - Satellite A300D - BSOD

  Hello

  The laptop in question (TOSHIBA Satellite A300D) recently stopped starting (BSoD).

  So, I tried using the recovery disk, but there is no help. What happens is:
  -After about 10 minutes of waiting, the first language menu load, so I click on "next".
  - Then I again click Next and accept the message that my HARD drive will be erased
  - Then I see a cmd prompt that says "try to remove all the letters of partitions possible...". »
  -There is also a minimized command prompt that says something like "RAID failed to initialize."
  -And then nothing happens.

  Is this a hardware problem? I also tried a full installation (instead of recovery), which, even once, is simply not. None of the errors is - it just freezes.

  Any help appreciated.
  Thank you.

  It is not easy to tell what can be the problem, but if you were not able to install the OS by using two different facilities CDs/DVDs, so there must be a problem with the HARD drive.

  The warranty is still valid?
  I mean you can contact the nearest Toshiba authorized service provider and explain the situation. They can swap the HDD and again test the recovery procedure.
  Can you get somewhere 2,5 SATA HDD for testing?

• Problem with the software Modem on Satellite Pro L40

  I tried to set up a connection Dial-Up Networking on a Satellite Pro L40 running Vista and can't get the modem to talk to the modem from the ISP. The connection appears OK and then you can hear the modem dial, but when the ISP picks up there is a bit of yelling and then my modem abandons the connection and I get the standard vista connection failed box.

  Things I've tried:
  -latest drivers for the 2.1.77.0 modem (and the rest of the system) downloaded from Toshiba and installed OK
  -all the updates of windows installed
  -removal of the modem in the Manager of peripherals and re - install
  -suppression of the agrsmdel.exe and then re-install
  -try different cables to plug into the phone jack
  -several different ISPS and phone numbers
  -reduce the maximum speed of the connection
  -connection to the same ISP with my Satellite L10; works very well never have time!
  -using the windows to diagnose and repair the tool (set last resort!); says that the modem works fine and can not find a problem with the connection

  Is it possible that the update of the BIOS on the laptop would make a difference (currently v 1.60)? I did some research on Google and found messages on various forums, which suggests that the connection between the motherboard and the modem chip is a little doubtful for all the Agere Soft Modem; If the case is it something I can fix myself or I should go for warranty repair?

  Midders

  Hello

  I'm sure that there is no problem with your modem, but with the configuration or even s ISP modem. I recommend you to speak with the support of the ISP.

• Error message "A problem with the cooling system" on Satellite A660

  Hi all

  Hope I can get help here. I got about 5 laptop computers HP after each of them had problems and errors. I got sick of them and so got a refund and bought a high spec A660-1FH.

  The A660 is a great laptop for two days until yesterday when I started having a saying of warning message "a problem with the cooling system has been detected. Please turn off the power immediately and return it for service "."

  The cpu fan works fine you can here it turns and the temperature of the processor i5 - 460 m is around 40 degrees for two hearts - that seems normal to me. I noticed that this happens only when running on battery, and if you switch from eco utility to the power saving mode. Its fine when running on the "balanced" power setting The fan is louder before when this message appears.

  Like its less than 28 days my retailer swapped it for a brand new immediately. Got a new home page, and the same message reappears. Everyone knows this. Like two laptops had this, I was wondering if it is normal that the laptop A660 series or if it was really a hardware problem?

  I tried to update the eco utility and the bios of the laptop, but the two are the latest versions. Can someone help or share if they have a similar problem with their laptop?

  Thank you

  In front of me, I have Satellite A660-13 q (PSAW3E) and I have about 6 weeks now. It works almost 10 hours a day and so far I didn't notice this message or anything that may be suspect for the operation of the equipment.

  I put really know why this happen on your laptop and don t think that there is nothing you can do about it.
  I would trade it again. What you can also try is to contact the closest service Toshiba. Make a call, explain the situation and ask if they can help you with this.

• HP Support Assistant unable to fix a problem with the CD/DVD not detected

  I have a G42-415DX laptop and I can not read cd/DVD, it was working fine 3 weeks ago and now nothing / I tried the support assistant and he could not solve the problem.  I got a message saying the driver must be reinstalled, how do I reinstall the driver?

  Hello

  If you do not get the chance to use another PC, I would definitely create the CD and the DVD bootable as it would give a clear indication if there is a hardware problem with the optical drive.

  In the meantime, try following the procedure in the title of the subheading "Let me fix it myself" on the link below to remove upper and lower filters (if these registry keys exist) and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  If find you the following registry keys and delete them, restart the laptop before checking the disc.

  Kind regards
   
  DP - K

• Equium A200 - problems with the CD/DVD-RW and Realtek HD driver

  I'm having some trouble with my Equium A200-1VO.

  First of all, I can't get the CD/DVD-RW to write any dics. The Player opens also from time to time.

  Secondl, I just downloaded and installed the latest driver Realtek HD audio, under the guidance of Toshiba, to see that when I plug my headphones the sound always comes out of my laptop speakers.

  Any help or thoughts?

  Thank you

  Now, he can be really problematic. If you use your own installation of the OS, no one can say with certainty what can be the problem. Each laptop manufacturer, including Toshiba, offer recovery image installation and in using the factory settings, everything should work well. These recovery images are tested and they offer all the hardware and software features.

  Maybe you should install Vista using recovery media supplied and check if all these problems are happening again. If yes then we can talk about the unusual and serious issues.

• Problems with the graphics card on Satellite Pro M10

  Hi, this is my first post on the forum. I'm not a pro with computers or anything... the problem I have with my laptop is similar to the one in this thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26849&TSTART=0

  I spent half the day trying to figure out if my graphics card is broken, but since I'm a newbie with this stuff, I'm still not sure. :(

  This is what makes my M10. I'm trying to describe the symptoms that detailed as possible, but I'm German, so please excuse my lack of words in some places.

  1. when I turn it on, the laptop goes through the BIOS and give me scrambled BACK-screens and a slightly Warped windows loading bar. There is the consistency check, marked by black bars connecting the top of the screen down. After the audit, the screen goes black and nothing happens, or the screen of will just show me consistency check, do nothing. Be that as it may, I have to turn off the power (I think) and restart the laptop.

  2. sometimes the laptop goes through the BIOS checking & conistency with a few graphical shortcomings. The office is anything but shredded when he gets to the screen of the Windows user. The static method is if serious I don't even know where is the button turn off.

  3. sometimes Notepad starts very well, with the only graphic problem being the windows loading bar. When I go into Windows, the laptop pulls me a blue screen and stops immediately.

  4. sometimes, the laptop works fine for about an hour or two. After I rebooted, I have the same problems listed above, once again.

  5. If I open Device Manager and disable the graphics card, the laptop works very well. I have to lower the screen resolution and colors, but I can watch videos on youtube and everything. Finally, the laptop gets very hot on the bottom and the screen goes crazy again, so I turn the damn thing off.

  I don't know what that means! If my graphics card is broken, the screen should be all static, ALL the time? Not just sometimes more,... could sometimes less be some sort of communication problem between the graphics card and cpu? Please help me with this!

  Another thing I'm not sure about, even after reading the thread I linked above - can I replace the graphics card or not? Everyone said something different in the other thread...

  see you soon,
  Cozmo

  Edit: maybe I will add when I got the screen scrambled and everything. I installed Civilization 4, just to check if my satellite pro can handle, and everything went well for a while. The screen then haywire and I rebuilt my whole system, but display problems did not disappear completely. They were gone for almost a month, and now they are 'back' or something.

  Hi Cozmo

  I'm not a technician but here nobody needs technical knowledge to see that there certainly is hardware problem. I also believe that this problem occurs due to the graphics card. Graphics card is part of the motherboard and it cannot be traded separately. The entire motherboard must be exchanged.

  In my opinion, you have two options: either contact the authorized service provider in your country and speak with them, what can be done, or try to get the motherboard used. If you are lucky, you can find it on eBay. I already bought several hardware components for my old Satellite P10 on eBay.

  Sorry Cozmo but I do not see any other logical solution for you.

  Good luck!

• Pavilion g6-2306el: problems with the recovery DVD-R discs

  Hello, it's only now that I saw that the DVD + R is suggested for all recovery discs burning. A little too late for me, since I bought several DVD-R to produce my game. Here is what happened: each disk has been created with difficulty; the burning process failed on all the others try. But in the end, I finally got the DVD-R 4 program have been burned and verified correctly. Now, when I tried to insert each disk to make sure that the laptop was able to read properly (the content supposed to be confirmed, after all), to my horror, I realized the first two discs were not being recognized. However, my patience was rewarded when, after a long time, suddenly, an Explorer window showing the contents of the disc. Taking advantage of the situation, I immediately copied this content in a folder on the desktop. It took me a long time to do this process for the content of the first two discs that had recognized problems. Subsequently I also copied the contents of the discs 3 and 4, which was much faster. Now, I have four folders with the corresponding content of the recovery disks in the office. The question is: can I use these content and burn on DVD + R this time, in order to have a working set of recovery disks? Thank you very much.

  Hi @anthony_s

  Thank you for your query.

  I understand that you have created your recovery on the wrong type of DVD disc and does not work.  You have copied the contents of folders on the desktop you and want to know if you can now create new recovery DVD on the appropriate type of files.

  No, it will not work.  I suggest that you contact HP support and inform about events and inquire about obtaining a recovery kit.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  I found this link on the HP forum, that you can read, I don't know if it works or not. Please let me know if it is successful.

  This is how to do a 2nd set of recovery disks.

  Good luck!

• problem with the CD/DVD ROM device

  Windows nofified it is problem with my CD ROM havin - two of them! I tried Windows troubleshooting. He tried to reinstall the driver but it failed.
  Then I tried Windows Update to see if I can find an update of the driver but he could not find any update related to my CD ROM
  Now I don't know wt to do at all!

  Hi khadija.

  1. you receive messages or error codes?

  You can read the following article and see if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Hope this information is useful.

• I have a problem with the CD/DVD-rom does not.

  Original title: CD-ROM/DVD-ROM and drivers

  Hello

  My DVD Samsung writer stopped working.  The model (SH-222) is a plug-and-play using CD-ROM/DVD-ROM drivers of the window.
  -cdrom.sys version 6.1.7600.16385 (win7 - rtm.090713 - 1255) in the folder: Windows\system32\DRIVERS\ and.
  -GEARAspiWDM.sys version 2.02.03.00 in the folder: Windows\system32\drivers\.

  I get the following error in the configuration of properties of CD-Rom drive: "Windows cannot start this hardware device because its configuration (in the registry) information is incomplete or damage (Code 19).»  I tried the windows troubleshooting hardware request without success.  I even swapped the the DVD burner with a new model of Samsung (SH-224) with the same results.

  I cleaned my registry using the "download free CCleaner.  I have a knowledge base of the obligation to register, but not enough to run an editor from the registry on the registry file itself.

  What are my options?

  Mario

  I cleaned my registry using the "download free CCleaner.  I have a knowledge base of the obligation to register, but not enough to run an editor from the registry on the registry file itself.

  http://support.Microsoft.com/kb/982116/en-us

  Your registry may be damaged. (Code 19)

  This problem occurred after cleaned your registry using "CCleaner database"? If so, then when running CCLeaner you would have the option to backup the registry keys. If you did, perhaps restore the backup keys. If not, read the article above (do not rely on the fixit).

• Problem with the series L of Satellite - black screen startup

  Hello

  These last days, I have a problem with my laptop. When I start it, nothing happens on the screen. I hear the process etc. of fans, hard drive, but there is no reaction to the screen. There is only one way to close: take out the battery and adapter.
  When I start it up after the problem, everything works fine.

  Anyone know what it is?

  Thank you

  I read about similar cases. It s really strange, but sometimes it happens
  But usually the BIOS update should contribute to

  You use the latest version of the BIOS?
  If this isn't the case, update with the correct version.

  Greeets

• Problems with the software DVD-ROM discs

  My hard drive is not always save when I insert my Sims 3 disc. They are the software DVD-ROM discs. Recently, I was able to install a new but have not been able to get my computer to record the disc since then. How can I solve this problem?

  Hello

  1 are. what software you referring?

  2. what operating system is installed on the computer?

  3. you remember make changes to your computer before this problem?

  Try the steps in the following article: your CD or DVD cannot read or write media http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us

• BIOS does not detect the CD/DVD on Satellite A205-S4639 device

  Hello!

  My laptop Toshiba works not very well, he has the following problem:

  When I enter the BIOS program (by pressing F2) main 'BIOS hand', the CD/DVD device does not appear in the module.
  Click on the link of the image: [main BIOS | http://softvaina.googlepages.com/BIOS.Main.jpg]

  Then, I go to the BIOS boot module and the CD/DVD device appears in the list of boot devices, che the image link: [BIOS Boot | http://softvaina.googlepages.com/BIOS.Boot.jpg |] BIOS Boot]

  Finally, I try to boot from the CD/DVD-ROM and it works (check this box [Image | http://softvaina.googlepages.com/BootMenu.jpg |]) Boot menu]).

  In the environment of OS (Ubuntu and Windows XP), the CD/DVD device does not appear, and it does not work.
  The laptop features:

  Make/model: TOSHIBA Satellite A205-S4639
  T.O.D.: 160 + 120 GB
  RAM: 3 GB DDR2
  Video: NVIDIA GeForce Go 7300
  Optical drive: PIONEER DVD - RW DVR-K17LF

  Note: I've updated the BIOS, but the problem persists.

  What is going on?

  > Then, I go to the BIOS start module and the CD/DVD device appears in the boot device list, click the link of the image: BIOS Boot
  It is a boot menu and it always seems to know whether or not the CD/DVD or HARD disk drive has been inserted!

  In my opinion, your CD/DVD drive is faulty or there is no link with the portable CD/DVD player.

  A mobile technician must verify and if necessary should replace

• Satellite A135 - problem with the CD/DVD burner

  Hey guys,.
  A few days ago as nearly a week ago I had burned an audio CD for myself and it worked perfectly. Today when I tried to burn an image on my DVD, disaster. I use two software. IMGBURN & NERO. Unfortunately both failed me. What is happening is that the burning process starts normally, it shows that the buffering and burning taking place as well as caching of files. "Finally, it shows the burning process has been a success, but when it comes to verification, the drive appears saying: data verification failed - too many errors (Nero) and for IMGBURN it says ' they layouts do not match. When I reinsert the DVD, it shows that it is completely empty. Although both claim that the fire was successful. Later, I tried to burn a data dvd, still no luck, engraving, he shows successfully but verification fails and reinsert is empty.

  My laptop is: Satellite A135
  CD/DVDROM: TSST CORP TS-L632D ATA
  OS: Windows

  the default windows was vista when I bought it.

  Hello

  If you can't burn DVDs, then you should check first if it is a software problem based question or related equipment.

  I've been reading about the reader of CD/DVD burning questions and as many times the registry has been corrupted.
  Means that you was able to burn the DVD after you remove the upper and lower filters in the registry. Google for it and you'll find many pages.

  Is there a problem of CD/DVD drive, then you should find a good update on the page of European Toshiba driver in your laptop. If there is no update firmware, then it means that this firmware is ok and it s not necessary to date.

  Last but not Lea not all CD/DVD drive are compatible with all drives (CD and DVD).
  Why? Because the different CD and DVD manufacturers produce own using different standards. In this case, it may be possible that not all discs will be properly treated

  I had the same problem but might solve this problem by using TDK R CD or DVD

• Problem with the video card and satellite L650 - 1 M 6

  Good evening!
  I have the new Satellite L650 - 1 M 6 with no operating system. When I did a fresh install of Windows 7 32 bit, I had several device problems. Most of them that I managed solve my self (as wlan drivers) but now I need your professional help.
  At this moment, I had left this problem of devices (on the information system):

  Not available ACPI\TOS6205\4 & 4A257CF & 0 the drivers for this device are not installed.

  I think it might be the video card (must be ATI HD5470) but SysInfo says:

  Type available, compatible adapter (Standard display types)
  Description Standard VGA Graphics Adapter adapt

  Would appreciate any help on this.
  Thank you in advance.

  Hello

  As I see you as laptop without OS and you try to install and configure your own operating system.
  In many posts, I wrote here that I write again and again that the most important thing is to install all the drives and Toshiba specific stuff according to the order of installation right then, here's the order of installation for your laptop model:

  Win7
  TOSHIBA Assist 3.00.10_O
  TOSHIBA Extended tiles for Mobility Center Windows V1.01
  Synaptics Touch Pad Driver 15.0.8.1
  Realtek 6.1.7600.30111 card reader
  V2.0.0.6 TOSHIBA HW Setup Utility
  V2.0.0.3 TOSHIBA supervisor password utility
  TOSHIBA Web Camera Application V1.1.1.15
  TOSHIBA HDD_SSD 3.1.64.6 attention
  SW 9.1.1.1024 Chipset installation utility
  Intel Management Engine Interface 6.0.30.1203
  Display driver
  Driver Intel Turbo Boost Technology 1.1.1.1007
  Driver Intel Rapid Storage Technology 9.5.7.1002
  Conexant Audio Driver 4.119.0.61
  TOSHIBA value added package 1.3.3_64
  LAN driver
  TOSHIBA Software Modem 2.2.97 (SM2297ALS05)
  Driver for Conexant Modem 7.80.4.50
  Battery Bluetooth for Windows by Toshiba v7.10.10 (T)
  Wireless LAN driver
  ConfigFree 8.0.29

  I recommend reinstall you Win7 and continue with all the other stuff flowing this install order and I hope everything will be OK.