Problem with the size of sqlite database

Similar Questions

• Problem with the size of ExtendedMap.xml

  Data Modeler 3 Production version.
  
  The logic model has about 70 of the entities and relationships, and about 6-7 fields by entity.
  Apart from the logic model, there is only one relational (Oracle 11 g if that's important) which is empty at the moment.
  
  ExtendedMap.xml takes about 7 MB in this configuration. It may not be a problem in itself, but it does not fit in our VCS ("too big").
  The question is: is this a normal size for this file or there is a problem with the design or something?
  
  I would like to know, if I can change the template in some way to solve this problem, before I asked an adjustment of parameters of SVN.
  
  Thanks in advance!

  You can remove it if there is no mapped relational model to logic. It will be restored on save next (small) and you can commit.

  Philippe

• Recovery system causing problems with the size of the screen.

  Due to some problems I had, I finally had to yield and perform a system recovery back to the manufacturer's specifications.  Once this is done, I downloaded all the updates to Vista, all the drivers, etc..  Everything is square and works fine now, with a big problem.  I bought a monitor 20 "a few months ago.  It worked fine before the recovery is done.  Since the resumption, the display is smaller, as if I still had the old monitor 15 '' on the system.  I did that the driver for the monitor is correct and up-to-date.  I found a way to enlarge the display of the size of the screen in an online search, but it does not clear up the problem.  For example... If I go to a site like the Pogo, the bottom of the site is almost normal size for the monitor, but the game pop up displays the size of the screen 15 ''.  I tried everything I know and can't get this last problem fixed.  Any suggestions would be greatly appreciated.  I also checked the resolution and makes sure it's OK for this monitor.  Thanks for your help.

  Do you have the driver from Microsoft or directly from the manufacturer?  If Microsoft, go to the manufacturer website and download THE latest drivers applicable on your screen and the version of Vista (Microsoft sometimes cause problems).  Does the monitor require any firmware - if so, download and install that too much of the manufacturer's web site.  You can also update the video card drivers and firmware just in case it is the underlying cause of the problem - again go to the web site of the manufacturer to get the files rather than using those available through Microsoft.

  Go to start / Control Panel / customization / display settings / and make sure that your monitor is displayed in the drop-down list.  If this is not the case, click on the box and see if you can find your monitor and then select and make the box extend the desktop to this monitor is selected.  Go into the advanced settings, click list all Modes and try one at the top, if it is not already selected (assuming that it is appropriate for your monitor).  If this does not help, try others that are compatible with your monitor to see if you can find one that allows you to achieve your goals.  It may not work, but it's probably worth a try.

  Other than that, I don't know what to think.  You already seem to have covered most if not all of the bases.  If the above does not work, maybe someone else review this thread will have other ideas to offer.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem with the size of the logo when converting to eps

  I'm all new to Illustrator. I created a logo and converted to an eps file. My problem is that when I use the logo, it is a big place with a lot of empty space on the bottom. I size the jury of the art of the area around the logo, but when I convert it I always get this great place with the logo on the top when I paste it into my word document. How do I get cropped to the correct size. I've got someone waiting for that and I can't even it in a format they can use.

  Looks like there is a hidden somewhere element forcing the whole document whenever this element is, even outside of the artboard.  Just a hunch.  Make a command Y (Mac) or control (PC) is to see the contours.  Then do a "select all" and see if the item appears anywhere.  Find it and delete it.  Now, maybe there is no hidden item.  That's what I do for each logo I prep would be: a.) if the work is h 2 "x 3" w (hypothetically speaking), set the size of your 3 x 5 work plan.  Define a holding imaginary line to the size 3 x 5 using a rectangle of 3 x 5 with no line and no fill > then lock it (object > lock selection).  You can benefit by exporting the work as a .tiff RGB and using them in Word.  However, you can import or insert a .eps in Word, but what works best.  I hope this helps.

• Problems with the size of the TIFF

  I made a model of 1000 x 1000 px. Precisely, I put in a chart, which is matching exactly the borders. When you export the file in TIFF, I don't seem to be able to get the dimensions 1000 x 1000 - it's always something like 1000 x 983, and my graphics is pushed to the left side. How to match .ai and .tiff?

  check the resolutions. Illustrator default screen resolution is always 72 dpi. Since then, it is a vector program...

  Your tiff is most likely at a different DPI.

  for example:

  If your tiff is 1000px x 1000px at 300 dpi = output print size is 3.3 x 3 x 3 inches

  If you place this file in illustrator. He will honor the size resolution and the release of this document BUT it will display at 72 dpi.

  "which means that you will get a picture which is at 3.3" x3.3 "at 72 dpi = then you will see 240 x 240 pixels on the screen.

  This does not mean Illustrator to change the resolution of your image and it shrunk. The actual resolution, as the number of pixels that existed in the file is always the same. Its just sipmly honoring the size of output at 72 dpi.

  so... the best way to fix this or get them to match, if you want to only illustrator to match your tiff.  Simply change your tiff image in resolution 72 dpi with resampling uncontrolled it's important, that leaves your number of pixels alone and you only change the output size, you will notice that your output size will be blowned enormously. This does not change a number of pixels in the image, just the size of output according to the setting of this resolution.

  Now if you put the same file it should appear the same size.

• problem with the size of the text on the search pages, too small, the rest of the computer is

  the text and images on the computer is in a good size in general, but on the search for pages in Firefox is too small, sometimes it starts several and then small tour in a few seconds... on the facebook page of the text is ok in size. How can we increase the size of the text at all times?

  Hello! Please take a look at the following article for more information about changing the size of the text:

  Font size and zoom - increase the size of web pages

• Presentation of the fluid grid - THE problem with the size of the Image

  Hello

  I worked on a new Web site using the provision of grid of fluid CS6. My site works fine in Chrome and Firefox but in Internet Explorer 9 and 10 and most probably other versions, images resize normall in Chrome and Firefox stay at maximum size in Internet Explorer. Please what could someone take a look at my site and see where I went wrong in the code because I can't find the problem anywhere.

  www.moleseyhire.com/index2.html

  Kind regards

  Ransom of Mitchell

  Try to add to your css:

  TD img {}

  Width: 100%;

  }

• Problem with the size of header...

  Hey,.

  I can't get rid of a gap at the top of my blindfold.

  The attached picture shows what I mean: If you look at the picture above on the left, you will see a black gap that I can't get rid of.   I want that image to go all the way to the top of the page

  How can I do this?

  Sorry for the simple question, but I just can't get by

  You have (head 2 text size) h2 tags around the image at the top of the page.

  
       
  

  They add a drop extra 18px above the image. Heading tags are block tags, which means (in part) that they come with an extra space (margin) above and below). Take off the h2 tags the image moves to the top. Then you can go to the css and the header div 200px height (the height of the photo) instead of 218px and all this will harden.

  .twoColLiqLtHdr #header {}
  do-family: 'MS Serif', 'New York', serif;
  background-color: #000;
  background-position: 0px;
      height: 200px;
  position: relative;
  padding-top: 0px;
  padding-right: 0px;
  padding-bottom: 0px;
  padding-left: 0px;
  margin-top: 0px;
  margin-right: 0px;
  margin-bottom: 0px;
  left margin: 0px;
  border: medium double #300;
  }

  Beth

• NetBook - problems with the size of the screen when you play

  Hello, I recently got a netbook 9 "and when I try to play games on it, the entire game screen does not fit into the netbook screen.  This means that I can't play anywhere the menu or game etc controls are at the bottom of the screen. Can someone tell me if I can fix the problem please?

  Hello Janspack.

  9-inch netbooks generally have screens of 1024 x 600.  Most games have settings to choose their resolution, choose something like 800 x 600 or 1024 x 600, if they support it, and that should solve it for games that operate at full screen.

  If you talk about browser based games, unfortunately they often have a fixed resolution.  In Internet Explorer, you can go to tools-> full screen to hide the browser frame that will free up a little space, but other than that there is not a lot that can be done about it, it's an a limit to have such a low vertical resolution. I crawled off NNTP - for now. Announcement of Yeovil, United Kingdom. On the internet at www.windowsresource.net. Please post back to let us know what works and what does not. :-)

• Hi I have a problem with the size of the works... Please help me

  in the moment when I created a size 100 cm x 100 cm work... automactly fits size... idk why

  Have you tried to turn the rulers (Cmd (Ctrl) r)? This will give you something to measure. Other wise, go to the right end of the control bar and select again you want to display in the control bar.

  

• Problem with the size of the video in the program monitor.

  I just bought PPro CS4.  When I import video files that they arise and would go well in the source monitor, but in the program monitor, the video size is very small.  My computer meets all the system requirement and I installed Quicktime Player.  What could be the issue here?

  Yes, if you are in the North Ameraca, you should have source NTSC.  But in a previous post; You told us that your source clips were PAL.

  You cannot change an existing sequence seetings.  Create a new one and you will be able to set the correct preset.

• Problem with the font size, appears as expected.

  I've been struggling with this for a few weeks now, but surely must is close to solved it. It's just a problem with the size of the police to just that one page.

  http://www.kgngroup.NET/logos_and_packaging.html

  I want the body of the text to be 10px, but after two weeks, played with all conceivable means, change the font size of the body in CSS and the document itself. I have the consultation in Safari, but others on Windows machines tell me it is out of whack.

  My main problem is that I can change the size of the font in the extreme, but he always appears as the same size in the browser (about 12px.) I don't know can be changed because I can change the wording and change online. It's just a problem with the font size. Oh, and in the third column, the one on the right in Dreamweaver, the font looks like it of tiny, can't even read, but in the browser, as the style11 is applied, all three columns search size equal.

  Don't know where to go from here. I want to just that the police of the up to 10 pixels.

  TIA,

  Ken

  I guess this is a follow-up of your thread earlier

  http://forums.Adobe.com/message/3627681

  What would really help in the diagnosis of the subjects such as this is to install the Firebug add-on for Firefox (as suggested in the previous thread).

  Firebug shows you visually what CSS rules apply to any element you click on the screen.

  In this case, you have a confusion of the CSS cascading over each other font sizes and who is confused by the mix of units without real reason. .style11 is unnecessarily applied to many people

  Tags. Remove these classes and to remove the rule.

  for example

  The tiny font in the RHS column is the first affected by

  {.style8}
  font size: 0.5em;
  }

  affecting thethen by

  .style11 {size are: 75 %}}

  affecting the

  tag.

  Result = tiny text (about 2px).

  In these cases of mass confusion, my approach is to remove all the sizing of fonts in the CSS and start over.

  Avoid %. Use px.

  Apply font sizing rules logically from thelabel facing downwards.

  That gives you a solid basis without strange effects.

• Strange problems with the database

  Hello

  I just got my Fuze and am very happy with it; However, I am having a very strange problem with the database. I have a 16 GB sdhc card that I use with the "rocket" and there are about 4 songs on the card that will not play and have no information charge tag. Their tags appear in the tag browser (not the in the track information screen) as just an empty rectangle. Under the track information screen, sizes are listed as ~ 4000 mb. The songs will not play and I can not jump in front of one of these songs once they were loaded.

  At first, I suspected some kind of corruption of tag, so I set out that night to track down the problem. I removed the 16 GB card and reset the player. Then, I loaded one of the corrupt in the internal memory of the player. The track has been scanned and played correctly. Then, I removed the track of the internal memory and it loaded on another SDHC card. Yet once, everything worked correctly, so I knew that the card I was using was a kind of system files or physical problem. I returned the original 16 GB sdhc card in the reader and checked that the file was still unplayable, and then I plugged the "rocket" to my computer. I transferred the unplayable file on my computer and compared (with md5sum) to the original file, thinking that if there was the file system or physical corruption the copy of the map would be damaged. However, the files were equivalent.

  To make things even more interesting, I also have problems with the registration of the kind. I have some files tagged Genres such as 'Classic' and 'Rock '. In the list of the genre, I see this:

  C

  CL

  CLA

  CLAS

  Class

  Classic

  Classic

  Classica

  Classic

  Rock

  So, there is corruption on the kind of 'Classic' but not the kind of "Rock". Each of the substrings of 'Classic' contains only a few titles, with most of the other titles listed where they should be. I checked that the tracks are labeled correctly and in exactly the same way as the other tracks that do not have this problem.

  I am at a total loss about what to do, and I'd really appreciate any advice or suggestions. I use the current firmware, 2.03.31a and the songs in question are in Ogg Vorbis format.

  MM

  Thanks for your replies.

  I managed to find what may be the problem. Tracks that received corrupt tags had the names of total path with more than 256 characters. It seems that the driver internal fat32 the rocket uses vomits all over the place when the path name is too long. Before the "rocket", I got an iPod running rockbox tags with the same directory structure that I have on the "rocket", so I don't think that this restriction on the length of the path name is a limitation or requirement of the fat32 file system. Reduce the path corrected the problem with the files being unreadable.

  However, the problem with foires genres the rest. Looking at the files show that corruption, they all have a little information in tags. Most of the information is contained in the hashes I have files that identify them via musicbrainz. The limit on the total number of characters in the tags of the track includes the "rocket" label is not read or use?

  MM

• Is there a problem with the maximum size of the RAM for Satellite 320CDT?

  I have a 320CDT Satellite with the latest BIOS (v8.00) and Windows 98 Second edition installed. There are 32MB memory base and a 32 MB module in the single expansion slot. If I change it to a plug-in 64 MB I see that 64 MB of total memory reported, not 96 as expected; the specification for the machine indicates that the admissible maximum memory is 160 MB (32 MB base + 128MB expansion). Does anyone know if there is a problem with the maximum memory size for this model and if there is a solution or workaround? I need to know quickly, in order to decide if I should return the memory module to the vendor! Thanks a lot for any help, Peter

  Satellite 320CDT supports an internal memory of 32 MB and a single slot can be used!
  You can improve it to max 96 MB (32 + 64 MB)
  I found a few old memory modules. You can use the modules SODIMM 144 pin EDO PA2043U 32 MB or 64 MB PA2044U

  Greetings

• Problem with the help of oraext: query-database in the transformation (XSLT 2.0)

  Hello!
  I m facing a problem with the help of oraext: query-database.
  
  In my transformation im try the following (Simplified):
  

  <xsl:template match="*">
    <xsl:variable sqlQuery="select ....."/>
    <xsl:variable name="storeSec" select="oraext:query-database($sqlQuery,true(),true(),'jdbc/xref')/>               
      <xsl:choose>
       <xsl:when test="string-length($storeSec/ROWSET/ROW[1]/STORE_PART_SECTION) > 0">
            <xsl:value-of select="$storeSec/ROWSET/ROW[1]/STORE_PART_SECTION"/>
       </xsl:when>
         <xsl:otherwise>
              <xsl:value-of select"some other val"/>
         </xsl:otherwise>
      </xsl:choose>
  </xsl:template>
  {code}
  
  This always results in +some+ +other+ +val+ !!
  I´v checked the output from oraext:query-database by using getcontentAsString and if I instead test putting the expected output from oraext:queryDatabase in my variable it gives me A100 which is what i expected.
  
  {code}
  <xsl:template match="*">
    <xsl:variable sqlQuery=select ....."/>
    <xsl:variable name="storeSec">
      <ROWSET>
       <ROW num="1">
         <STORE_PART_SECTION>A100</STORE_PART_SECTION>
       </ROW>
       <ROW num="2">
         <STORE_PART_SECTION>XXm</STORE_PART_SECTION>
       </ROW>
      </ROWSET>
    </xsl:variable>               
      <xsl:choose>
       <xsl:when test="string-length($storeSec/ROWSET/ROW[1]/STORE_PART_SECTION) > 0">
            <xsl:value-of select="$storeSec/ROWSET/ROW[1]/STORE_PART_SECTION"/>
       </xsl:when>
         <xsl:otherwise>
              <xsl:value-of select"some other val"/>
         </xsl:otherwise>
      </xsl:choose>
  </xsl:template>

  How to get the correct value when you use oraext:query - database?

  How should you exit? Several item ID with each having a value of the result set?
  If Yes, then you can try following: