Problem with the size of the logo when converting to eps

Similar Questions

• my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  My iphone 6 has started having the same problem. Its literally the GPS. Saying that it does not find me at all. Ive seen say location for more than an hour in the suburbs of chicago. It started to happen to me after I downloaded the latest update for the iphone. I hope they react and let you know what is happening because I'm dying to know as well.

• Hey I have a problem with the library, when I try to enable the creative cloud desktop application it keeps saying "cannot restore the file: C/users/USER name as the location of the file is not available."

  

  This is a double post of a following:

  Hey I have a problem with the library, when I try to enable the creative cloud desktop application it keeps saying "cannot restore the file: C/users/USER name as the location of the file is not available."

• Laptop G60-549DX (with OS Windows7-problem with the microphone when using Skype)

  Just bought a laptop G-60-549DX. His mic is BAD. Voice of cuts to when using Skype. Help!

  I was able to solve the problem with the microphone on the G60-549DX when using Skype.  I spend up to 6-8 hours, talk with convenience stores of HP.  They were very friendly and helpful.  The same help a friend.  My friend downloaded updated bios and micro drivers.  HP technician asked me to turn off the laptop, then remove the battery, unplug the power cord. With battery removed and stop, I pressed the market / off power button for a good minute evacuate remaining power into the computer. When I restarted the laptop I micro worked. I did a little more fine-tuning of the installation of the microphone.  Now, it works well on Skype and sound recorder. I won't take this back within the 14 days return policy.  It's a good computer I can say.  The technicians were all very friendly and helpful.  They called me several times to check to see if it still works OK! They are HUGE!  They want to help with any other question, I have perhaps with the computer.  Thank you very much for the help. Everyone was SO helpful.

• Problem with the resolution when you connect to a projector

  I regularly used my laptop connected to a projector via a cable VGA for PowerPoint and video clips view in Windows Media Player.   It is automatically detected and adjusted for different sizes of screen of the laptop screen (1366 x 768) and projector (1024 x 768) and projected with success.   Recently I connected the laptop to a second monitor - also 1024 x 768 - instead, and even once, it fits perfectly.

  It suddenly stopped setting for the resolution of the projector; When I go to the resolution of the screen, the option to set the resolution of the second screen is grayed out.   No matter if I use extend or duplicate, he insists that the two screens are 1366 x 768.   This has happened with two projectors, all two used to work properly.   I also tried different VGA cables.  The end result is that the image of the projector is hurry to tray.

  I can connect fine to the second monitor via the VGA port and sometimes with different resolutions for both screens.   I can also connect to a TV via an HDMI cable.   I can't try a HDMI cable for the spotlight as it is ceiling mounted, and the other is old and is not an HDMI connection.

  I checked the drivers and they seem to be up to date.

  My laptop is a Dell Latitude running Windows 7.   The graphics card is an Intel HD Graphics 3000.   I tried many suggestions already given on these forums without success.   The real puzzle is that it was working fine and nothing I can draw has changed except that I connected on the other monitor.

  Hi Tony,.

  Thanks for the reply with the status of the issue. I'm sorry to know that the issue is still unresolved, your efforts to solve this problem are much appreciated.

  I suggest to follow the method below and check if that helps:

  Method 1: Perform a system restore.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  System restore WARNING: when you use the system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Method 2: Uninstall all hidden devices:

  Step 1: See the article below to activate the devices hidden in Device Manager.

  Look at a hidden devices

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff553955 (v = vs. 85) .aspx

  Step 2: After you enable hidden devices, remove devices from Device Manager.

  1. press start.

  2. type device manager in the start search box.

  3. Select Device Manager in the search result.

  4 uninstall everything that are grey also uninstall the drivers to display completely.
  5 restart the computer and install the drivers to view the manufacturer's Web site.

  Hope this information helps, just reply to the State of the question to get help.

  Hi Rizwan

  Unfortunately, I do not have a restore point old enough until the problem occurred.   I have not found any that was relevant in hidden devices, but in normal Device Manager mode when I clicked on "monitor" it opened a "Generic PnP" entry even when there was no extra monitor or projector fixed.   When an additional monitor has been attached, there were two of these entries.   I disabled them both, and I found that I can now adjust the resolution of a second monitor to a different setting of the laptop screen.

  Thanks for your help.

  Tony

• Dual booting - problem with the disk when trying to start windows

  original title: problems with dual boot.  Windows does not play well with others.

  Hello

  I have Windows Vista Home Premium 64-bit included with the computer.  I installed Fedorah and it works on my computer.  When I installed it, but I had my hard drive partion.  I left most of the hard drive (about 400 concerts) as it was, when I booted up Fedorah worked well and gave me the option to boot or windows.  When I started in the window, however, it wouldn't let me start my computer, it says I have a problem with my drive.  With XP, it gives me no problem, I didn't ignore the disk check, but with Vista for some reason it doesn't let me start.  It gives me a few options of restoration to the previous status confuses the computer he says I manually type in which windows in the command line.  I don't have my windows CD, the only other option that I have that seems to work when I click it is restoring to factory fault which I don't want to do because I don't want to lose all my files.  Please tell me what I need to do.

  http://Fedoraforum.org/

  Fedora forums at the link above.

  A refund Stsrtup of Vista Disk link.

  Download the 64-bit on the right.

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  See you soon.

  Mick Murphy - Microsoft partner

• Problem with the color when exporting to other Adobe programs

  Hello

  When I uses 32 bits per layer in my After Effects to get the really nice glow effect and make everything look OK, but when I use the Dynamic Link for Premiere Pro and then try to make my sequence with Media Encoder deferential eye colors inside After Effects.

  Is there a problem with 32-bpc and dynamic link, or I do something wrong?

  Editing programs do not operate in 32bpc, even if PR calculates the effects in 32 bits. This has to do with the range and models of different colors. Usually 32bpc also requires correct color calibration and conversion via LUTs or profiles from your computer screen is not initially 32bpc. This being the case and to avoid the problems of conflicting settings and hardware acceleration (which is also used for color management), in such situations, it is better to make the file and import it in first. Otherwise, you have work major reading and configuration to do.

  Mylenium

• Problem with the menu when creating Bluray

  Hello world

  My first post here and not really a professional in creating...

  I recently create a project still 5.1.0.342.

  The project is made of some exported videos first.

  The problem is that when I build a bluray image (file works the same and I have not tried disk because I don't want wasting them) there is absolutely no menus.

  I created a set of chronologies, some in playlist (no chapter selection) and named 3 menus associated with a video in the background.

  When I check the project all that I get no error and the entire construction I've tried so far is well over.

  When I saw after the restitution of everything on the menu is very good.

  When I build the DVD image everything goes according to the preview and the chart.

  When I build the BluRay all the files appear to be in the bluray (I can access everthing with the option of selecting players), but there is no menus.

  I found videos with buttons and circles, but they are like other videos, they are not menus...

  If anyone has any idea I'll take.

  Thank you for reading me and sorry for my English, I'm french.

  If you have a BD - RE disc, then please try to burn to disc.

  And if the menu is set as the first piece, it will appear after inserting the disc. (Anything defined as part of the project appears on the disc.)

  Thank you

  Ramesh.

• Problem with the mouse when having double (multiple) monitors follow-up.

  I'll start with the configuration of the computer:

  The OS is Windows 7 Ultimate, 64-bit 6.1.7601, Service Pack 1

  Guest operating system is Windows Server 2008 R2 Enterprise Service Pack 1

  VMware Workstation Version 8.0.0 build-471780

  When I have multiple monitors allowed (the resolution is 1920 x 1080), I can't use the second monitor correctly.  In my setup main monitor is on the right, but the question I have also occurs when the primary monitor is on the left.

  In the screen below, I move my mouse to the center of the title bar and click and hold to drag the window.

  

  In this screen, you can see the outline of the window I am dragging to the left.  My mouse is now located to the left of the screen to the right about to cross the box to the left of the monitor.

  

  You can't see the mouse in the image 3 below, but I'm still it moves horizontally to the left.  The outline of the window, howvever, moves to the right and downwards.

  

  In this image of 4th, it is difficult to see the window is now pretty close at the bottom of the screen to the right, but my mouse is completely to the left.

  

  The last image shows that when I bring my mouse to the right (primary) screen, the window comes up to proper placement.

  

  Another finding is that, so Oh the right browser window and I just move my mouse to the left screen, the mouse will change the pointer and the browser would show the link in the bar which position of the mouse would be poorly determined to be on the right screen on a link in the browser State.

  Everything works fine if I keep just to single screen.

  Thanks in advance for any help on this matter.

  Ed

  OK, I've seen the same behavior with:

  Host OS 64-bit Ubuntu 11.04

  The OS Windows XP SP3 32-bit

  VMware Player 4.0.1 528992 build

  workaround that fixed it was uninstall VMware Tools on the guest (8.8.1 build-528969), reboot,.

  then install again with the host operating system were two connected monitors

  the upgrade of Joueur3 Joueur4, HW comments to 8.0 and upgrade update: tools, everything has been done with a single monitor for the host operating system... maybe something went wrong then.

  Post edited by: Hico

• Problem with the Logo of the APEX 4 positioning

  I just migrate to 4 APEX of 3.2 and have noticed that the logos I have in my applications now overlap the bar at the top of the page. I use the 'blue builder' theme, but this happens in several themes. The problem is solved in the thread below reference but I don't have access to the CSS file and could use some clarification on the solution. TIA.
  
  
  Request Logo theme 17 slide down...

  I don't know what you want but
  -If you want the logo below the bars Blue: changing the css of the value #app - logo to 175px
  -If you want the logo above the blue bars: changing the css of the height to 175px #header value

  and if you want to change your style at work: place them just before the head-end tag
  (and not directly after the header tag, because they were crushed by the tags of standards).

• problem with the colors when printing to PDF in FM9

  Hello

  We have some problems with printing to PDF with FM9 colors.

  FM document files eps (1) with a green box and (2) a rectangle created with the tools chart FM, filled with the same values of color green (91/0/60/44)

  In FrameMaker both colors is really different, but too bad, in the PDF color (eps) and the rectangle obtained the same correct green color.

  OK, him differed in creation, so they were CMYK and RGB, but your printing coming.

  Now in FM 9:

  (1) if I do a "save as PDF" and turn off "convert to CMYK in RGB" resulting PDF is the same from FM8 (correct)

  (2) if I print to PDF via distiller and set job options for "convert all colors to CMYK" resulting rectangle Green is very different from the greenery of the eps.

  I tried different options, the best result was "convert all colors to CMYK", the other options just very more ugly.

  Does anyone of you know a solution to your problem? The help is very appreciated. I could send examples of files if necessary.

  Thanks in advance.

  PK

  PK - ulm wrote:

  But we want to use the option to print using the Distiller.

  PIA,

  This sentence needs some explanation, I think. Why you want to use the print option?

  Using the print option,-you're always going the same route that FrameMaker Win has always been, that uses the postscript RGB driver only Windows. Now with FM9, you have the possibility to get CMYK directly to PDF, as defined, without any color conversion. And it * is * works, as long as you limit your documents CMYK or spot from the FM library.

  So, once again: why do you want to use the print option?

  On a sidenote: I do not know if I interpret your username correctly, but if you are able to understand German, you will find some tests deep color manufactured FM9 here: http://www.hilfdirselbst.ch/foren/FM_9_und_Farben_in_PDFs___getestet_P387800.html

  Bernd

• Problem with the screen when it rains it is wet

  Hello world
  Any of you had a similar problem like me?
  I noticed this before, when the screen is wet or raining on her is pushing screen by itself.
  At first I thought it's because problem of protector of screen, but 3 days ago when it rained, I wasn't able to use my phone at all, and I needed to call so consider screen protector, but the problem was still there.
  Like water proof phone that this should not happen.
  Is there a problem like that with my phone only?
  Should I inform Sony about this and send for repair?

  When the device comes into contact with water, the touchscreen misbehave. It's normal, that's why you have app touch block to take pictures under water.

• Problems with the cursor when you type

  I don't know if it's something in Vista, but I have terrible problems in Word and when typing emails. I can touch type and normal type without looking at the screen. However, I find when I look at the screen, the cursor inexplicably himself stuck about4-6 rear lines and hit the last piece in the middle of the existing text. In fact it just happened again - when I type ing he climbed to the title: why!

  I feel responsible because I don't get it in the older microsoft software that I use at work and it has never done in internet cafes - didn't have it a few months, but it drives me crazy: why it does this?

  Patjom, make sure that you do not have to hide when you type the value of the mouse pointer. Here are the steps:

  Open mouse by clicking the Start button, click Control Panel, clicking hardware, and then clicking on the mouse.
  Click the Pointer Options tab, and then do one of the following:
  Uncheck the Hide pointer while typing Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with the mouth when I turn 3/4 or the side

  Hi guys I'm almost done my puppet, but I have a problem. Forward works perfectly when I talk but when I turn 3/4 or side, the puppet shows that the first layer of the mouth, I'm talking about, but nothing happens, im sure the solution is very simple. Thank you!

  Views many puppet need a pair of Face and Lip Sync behaviors applied to subpuppet of view, rather than the top level of the puppet (where they by default) in order to get the mouth/visemes to work in all views. You can remove the pair at a higher level and select the views to apply the pair in the Panel of the puppet. Behaviors of high level appear in the Panel of puppets when you clear all.

  We are in front of seen this happen automatically when more than one layer of 'Head' is, or maybe specifically named views.

  See also this thread: Re: the mouth of the movements do not work when the wendigo turns its head on the side or 3/4, is this normal?

• Problem with the date when you load the XML file into Oracle Database 10g

  Hi all
  
  I have the interface as shown in the screenshot below. In this document, among other things, I am mapping to an element XML file representing a date to an Oracle table column defined as DATE. The source and target columns are highlighted in the screenshot.
  
  ! http://img223.imageshack.us/img223/1565/odiscr275.jpg!
  
  When I run the interface, I get the following error message:
  
  java.lang.IllegalArgumentException to java.sql.Date.valueOf(Date.java:103)
  
  I guess that this is the conversion of the date!
  
  I already tried to replace SRC_TRADES. DEAL_DATE with TO_DATE (SRC_TRADES. DEAL_DATE, ' DD/MM/YYYY') on the implementation tab. This feature was not recognized when I executed the interface, so it did not work! The value of date in the XML file is in the format DD/MM/YYYY .
  
  I guess that Date SQL Oracle functions do not work in the implementation tab. Could someone let me know:
  
  1. what the Date Conversion function I could use instead?
  2. where can I find a reference to the methods/functions that I use in the implementation tab (if such a reference exists)?
  
  See you soon.
  
  James

  Hello.

  Try changing the area of execution at the staging area. Once you change it, write in the map box just SRC_TRADERS. DEAL_DATE. When you use TO_DATE, the source field typu should be varchar2, no date (as it is in store for your data source)