Problem with the transcend USB on Windows 7

Similar Questions

• Problem with the new installation of Windows XP on the Satellite A100-259

  Hi all!

  I have a problem with the fresh install WIN XP on Satellite A100-259 (PSAA2E).
  I already deleted the partition, formatted (NTFS) and tried to reinstall from recovery disk that initially provided with the laptop. But whenever I try to install a problem is detected (for the most part it's 'page in the nonpaged area failure').

  I also tried to install the OS directly from MS Windows XP Home Edition SP2 CD - the same problem.
  I checked the partition using PQ Magic and discovered that there are ' partition table error #110 ".» So, what I did:

  (1) delete partition-> create new partition-> format (NTFS)-> reinstall from recovery disk-> has not yet;
  (2) partition delete-> install WinXP CD original by create and format partition option-> has not yet;
  (3) delete the partition (using the magic of pq)-> create partition (using the magic of pq)-> format NTFS partition for win xp option-> check partition-OK no problems don't-> installation of original win XP CD-installation without changes-> option failed even once
  (4) delete the partition (pq magic)-> create partition (pq magic)-> format NTFS partition for win xp option-> check partition-OK, no problem-> installation of the recovery disc-> has not yet

  Whenever a different error is detected, so I can't identify the problem. I don't know what to do. Does anyone have any ideas?

  Hello

  Seems that there are some problems with the standards of the partitions.
  A friend of mine has tried to install the OS on the recovery CD on the laptop that has been formatted with Partitions Magic 8 and the installation failed.
  It was very strange

  Finally, we have formatted the whole HARD drive using the CD original Windows XP Pro.
  We did not remove the partition but simply kicked this CD and after the configuration process spent, we formatted the whole HARD disk and install XP without creating all the partitions.

• Problem with the mode standby in Windows 7

  Hello friends,

  I have a big problem when Windows 7 updated itself. I have a laptop Toshiba Satellite L505D. When I close the lid, it will automatically 'sleep' mode. Unfortunately, the screen is black and the laptop is still in progress, I have to stop it and then turn. Is it a problem with the driver 'stack '? Please, help me :)

  >.. After Windows 7 update itself
  How to understand this?
  Have you installed the Windows updates or what?

  Have you tried to restore the OS using System Restore tool and check if the problem persists?

• Problems with the display settings in Windows XP on my acer aspire netbook

  Lack of custody of my office and the bottom was always blue. When for example I opened the menu options for DIVX it's all close together and the window is way to big for the screen I can't see all of the screen. Also problems with the connection to my netbook to the TV. It should never be on the screen and I can't understand how difficulty. Any suggestions

  Hi CharlesHefty,

  1. do you get an error message or error code?

  Check the event viewer for the newspapers of the related events that could help us solve the problems:

  Procedure to view and manage event logs in Event Viewer in Windows XP

  I suggest you try the steps from the following links in the article and see if it helps:

  How to solve problems of hardware and software drivers Windows XP

  How to configure and use multiple monitors in Windows XP

  Overview of multiple monitors

  I hope this helps.

• Problems with the application mail in Windows 8

  Original title * app email windows problem 8

  my windows mail 8 app suddenly stopped receiving and sending e-mail, but they are received in the mail from bt

  Hi Neil,

  Thanks for posting your query on the Microsoft Community.

  As described in the question, I understand that you are unable to send and receive emails.

  This issue would have occurred due to corruption Mail app.

  I need some information to move forward.

  1 did you changes to the computer before the show?

  2. which email account you set up with Windows mail app?

  I suggest you follow the methods to check if it solves the problem:

  Method 1: Run the Windows 8 App troubleshooting tool.

  This utility automatically solves some issues that may prevent your running applications, including the suboptimal screen resolution and security or incorrect account settings:

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Method 2: Follow the instructions in the link below:

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-GB/Windows-8/what-troubleshoot-problems-app

  I hope this helps. Please let us know the results. We will be happy to help you further.

• Help me to solve the problem with modem hspa usb on Windows Vista and Windows 7

  Hi, I have a problem with my USB HSPA modem when I tried to install in my Windows Vista 64 - bit PC. Sometimes it's OK, but sometimes it has encountered an error trying to install it. After the installation of the almost complete progress, reports of windows as "Unknown material" or "driver is not found. Maybe after a few tries, I was able to install the modem. But later, its happened again. I take the modem at the other PC with XP, it is still OK, but it happened again with Windows 7 Ultimate 32-bit home version. so could you help me to fix it? is it a bug of Windows Vista and windows 7? Thank you very much

  Hello

  go to the website of modem manufacturers and look for the last vista and/or firmware for windows 7

• Still problems with the adapter Bluetooth Toshiba Windows 7

  Hey there, it's me again.

  I am referring to my 'Problem Bluetooth on Windows 7' subject:

  I thought after the solution of bluecat that my problem has been resolved. But it isn't really.

  After you install the Windows fix, it worked just a short time. But now the problem is the same.

  When I remove the Toshiba Bluetooth Stack and try to work with Manager Bluetooth of Windows, I see that the Bluetooth icon is to come and one to go on the taskbar. In Device Manager, I said Windows, that it is not closed the device to save power. But I think that the device is on and walk and stop...

  I really absolutely have no idea what is the problem, but I get terribly angry.

  Details:
  Windows 7
  Dell Wireless Bluetooth internal adapter 350 (but it is manufactured by Toshiba)
  Experienced pilots: Vista Pack of profile of the Dell homepage (no battery installed, driver only) / Toshiba Bluetooth Stack (the latest version)

  This is the old thread:

  Hi all

  Just as I installed Windows 7, my keyboard and Bluetooth mouse do not work very well.

  I use the Dell Wireless 350 Bluetooth internal adapter, Toshiba Bluetooth Stack 8.00.02 and the keyboard and mouse Logitech MX1000.

  To connect the devices on my computer, I first have to disconnect the Bluetooth adapter by pressing Fn + F2 on my Dell i9400, after re-login I can search and connect devices correctly. They work fine as long as the laptop is running.

  After restarting the laptop, devices no longer work. They are still in the known, but not connected Bluetooth stack. That's why I have to unplug the adapter Bluetooth, another time and reconnect in order to connect the two devices.

  I first thought, it's a Windows problem. I thought that Windows is able to ask the adapter to save power. But when I go to Device Manager, there is no box for this option, as known from other devices (Te USB Ports). If this isn't the problem. I think the problem is something else, maybe performed by the Bluetooth stack.

  Windows XP it worked perfectly. I used the same hardware and also the battery Bluetooth Toshiba (uploaded on the homepage of Dell).

  Someone at - it ideas?

  Thank you!

  Daevu

  Hey there

  Yesterday I did Format C: and installed Windows 7 news.

  I do not have a bluetooth driver for my Dell Wireless 350 Bluetooth adapt (made by Toshiba).

  And now: the mouse and the keyboard work. I even do not see anywhere in my system, but they work.

  There is no bluetooth adapter in my device manager and I had do not connect the keyboard and mouse with my computer. She simply do nothing.

  I do not understand this...

  What is a backup connection?

  What I tried:
  -> Installation more recent Bluetooth Stack from Toshiba. Problem in the above message. I also installed the MS Hotfix. The same problem.

  -> Installed "Vista profile Pack" on the home page of Dell, recommended for my laptop and Windows Vista. There is no battery installed. So I had to connect the mouse and keyboard via the Windows Bluetooth Manager. But the adapter was performed on and off windows, the icon in the task bar came and went and came and went. Connection is good, 1 minute then a few seconds. Not possible to work with the mouse.

  And now, without having to install a driver, it works. Am I stupid?

  Daevu

• problems with the final installation of windows 7

  I have a HP Compaq dc7700 Small Form Factor, which works on XP. Recently I decided to upgrade to Windows 7 Ultimate edition and started the installation but to halfway through the process, there was a blackout and restart, the computer boots from the installed windows 7 but because the installation is incomplete, the computer gives this message

  "The computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install windows click on 'OK' to restart the computer, and then restart the installation.

  The problem is same when I try to boot from the disk or Flash DRIVE, the computer always boots from the hard drive and ends with the same error.  How can I restart the installation? I tried to boot with the Windows XP drive and another drive in Windows 7, but the problem persists

  Hello

  How do you change the boot order?

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  And use the Start Menu button:

  http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html

  • Restart the computer and continue to touch the F button (see screenshot below) Manager to open the screen Menu starting for the brand and the model of your motherboard or your computer until it does.
    • 

  See you soon.

• Problems with the new installation of Windows 7 Enterprise 64 on T400

  I'm trying to do a clean install on win7 64 on my t400 (2764-CTO) ent

  I burned my drive to a .iso directly from my microsoft partner portal.  When I boot the disk, it starts and starts to copy the files.  After that, I get a small windows with a black background splash screen.  After that, all I get is a mouse with a black background.  I can move the mouse, but my Setup seems to stop there.  I do not see the occasional hard disk activity, but I can get out my drive and have no complaints, so it seems to stop the disc at this point.

  I tried to create a new cd and I have the same problem.  If I run the disk then that in my current configuration of windows, he opens the settings and will begin the upgrade to win7.  I quit because I want a clean install.

  has anyone experience this problem?

  I have re-uploaded the file image .iso last night and will try to burn a new disc from tonight and see where I get with it.  If this does not work, I will try to boot from usb, but I really prefer to do just from a dvd.  also, I tried - r and + r media with the same results.

  Thanks for any help,

  Josh

  vedman wrote:

  I burned my drive to a .iso directly from my microsoft partner portal.

  You validate the checksum on the download of the image?  I seem to have a problem any image on your DVD.

  See you soon,.

  Bill

• Satellite A300-1EG: problem with the touchpad after installing Windows 7

  Hello!

  I had a problem with my touchpad since I installed Windows 7 (64-bit version) on my laptop (Toshiba) A300-1EG.

  I tried many different solutions to this problem.
  I checked the alignment of the touchpad (be it on) in the BIOS, I tried to install several drivers (on a site of Synaptics, automatically by Windows) and none of these work. Of course, I tried FN + F9 key combination.
  When I check the alignment of the touchpad in the Control Panel, everything seems fine. It is written, that "device working properly.

  I have Toshiba Software, what may be the cause of the problem?
  But I have no idea where I can find something.

  I'd appreciate any help.

  I hope to be understandable - English is not my mother tongue :) Thank you very much in advance for any ideas. :)

  Hi mate

  I'm not quite sure what problem you have but you should first try to install the necessary drivers touchpad m.
  Maybe you used the wrong driver in the past

  So Sat A300-1EG belongs to the series of PSAG4E.
  The European driver Toshiba page does not provide a special touchpad driver for Win 7 for this device.

  But I noticed that Win 7 64 bit drivers touchpad (Alps & Synaptics) for Satellite L500 PSLS3E series is released on the European driver page.
  Try both drivers Touch Pad for this device and test it!

  Welcome them

• Lenovo G50-80 - problem with the installation CD of Windows 8

  Dear community!

  I have the Windows 8 installation problem on my new laptop Lenovo G50-80. I received the CD Lenovo with WIndows 8, inserted the CD into the DVD player and placed the DVD drive as first boot priority.

  The problem I have is that my Lenovo does not load Windows 8, instead, every time he goes to FREE DOS. What should I do?

  Here is the picture of the BIOS settings:

  http://i.imgur.com/yX2FknE.jpg

  http://i.imgur.com/ZvROZal.jpg

  http://i.imgur.com/V2gryuf.jpg

  http://i.imgur.com/8yvydjU.jpg

  http://i.imgur.com/gw1YxfO.jpg

  Here's youtube video:

  https://youtu.be/jsvzpu5Qu1o

  Mod edit: System model added to the front of the subject line to improve visibility / clarity.

  I used no bootable DVDs. That was my problem. The DVD I got Lenovo have been only Windows 8 drivers and no OS.

• Problems with the last update of Windows - XP

  My office has recently installed a few days ago most recent Windows automatic updates. I have never had any problem with them until once they have been installed. Now, I am constantly the dreaded BSoD, and my computer not acting is not right. My tv tuner gel to my computer disconnected from the internet after a while to even my mouse not acting pointer is not right (he is not above windows, sometimes only behind them). The Blue Screen of Death appears for a split second, so I have absolutely no time to see what he says.

  The error report contains the following:
  C:\DOCUME~1\LPLINK~1\Locals~1\temp\WER6c8a.dir00\Mini112609-01.dmp
  C:\DOCUME~1\LPLINK~1\Locals~1\temp\WER6c8a.dir00\sysdata. XML

  The error signature:
  BCCode: 1000008e BCP1: C0000005 BCP2: 004D004E BCP3: 9EBD4B70
  BCP4: 00000000 OSVer: 5_1_2600 SP: 3_0 product: 256_1

  When I look into the details, he said something about a device driver. But that doesn't help really since everything he ever said whenever I get a "serious mistake." I've done many analyses of virus/malware/spyware (even with the different products as well) and they all find nothing. Which brings me to the conclusion that the most recent updated Windows (23 or 24 November) is what caused my office these problems.

  If someone could help please shed some light on this problem it would be greatly appreciated.

  Edit: I also noticed that when my computer disconnects from the internet, I have to restart in order to regain access to the network. But when I try to restart, it refused to stop and freezes just my background image. I also have a laptop with XP Professional SP3 on it and I have absolutely no problem with him. It is only limited to my office.

  Legrand, I had the same problem and it was driving me crazy too. I tried everything and finally understood the November 25 or 26 update messed up my AVG anti-virus. I deleted via the control panel and did not have a freeze since! I hope you are using AVG, cause if you are, it's probably your answer too. I'll check back here soon to see if this helped you.

• Problem with the Acer, c/o Windows 7 laptop installed with the loading games

  I'm having a problem with Windows 7 which is preinstalled on a laptop Acer Aspire. Unless the laptop is on battery to 100% or pluged, games does not load upward. Because it is preinstalled serial numbers are not match so I can't get help from M/S.  Acer says it's a software problem.  Any suggestions?

  Hello

  a. What games you try to play?
  b. do you have this problem with all games or specific games?
  c. Since when are you facing this problem?

  You can also change the power on your computer and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

  Keep the battery power:

  http://Windows.Microsoft.com/en-us/Windows7/conserving-battery-power

  You can also try to update the BIOS, for this you need to contact the manufacturer of the BIOS.
  Note: modification (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer
  to start properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes of
  the settings are at your own risk.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I wonder if anyone is familiar with this type of problem with the help of a Windows Media Player for DVD videos.

  Hello!
  I came across a problem with my dvd on my laptop drive. The program that I use on my laptop is Media player from Windows. And the laptop will recognize the DVD and everything, but when it starts to play, it gives me this message from Windows Media Player: "Windows Media Player cannot play video DVDs. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings. »

  Now I always use the old Windows XP for my laptop, but I can't seem to understand how to adjust the color quality and lower my screen resolution. Does anyone have a little step by step process that I could follow to do this?

  Lyn24 wrote:
  > Hello!
  > I ran into a problem with my dvd on my laptop drive.
  > The program that I use on my laptop is Media player from Windows. And the
  > laptop will recognize the DVD and everything, but when it starts to play
  > gives me this message Windows Media Player: 'Windows Media Player '.
  > can't read DVD-video. You may need to adjust your Windows screen
  > settings. Open display settings in Control Panel and try again
  ring your screen resolution and color quality settings. »
  >
  > Now, I still use the old Windows XP for my laptop, but I can't
  > seem to figure out how to adjust the color quality and lower my screen
  > resolution. No matter which deals a little step by step I have
  > could follow to do this?

  The problem is that Windows XP does not play DVD movies in native mode. You can
  have a DVD player, but it can only read DATA DVD at this time. In the order
  install a DVD codec to read video DVD discs. First we will
  Install this program from Microsoft and run it, and if you have a DVD
  Codec, it will appear in the display window. Download this program from
  here:

  http://www.softwarepatch.com/Windows/windowsdvdmpeg.html

  If it shows that you don't have a codec DVD installed, then you can
  buy one on one of the links on this page:

  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  --

  Roy Smith
  Windows XP Pro SP3

• Is there a problem with the latest update of Windows for Vista (January 13, 2016).

  After installation of 10 updates by restarting, through phase II and restart again my display driver stopped working so there is nothing on the screen. The disc did something for about 20 minutes, but there is no signal on the screen (yellow light instead of green).

  I had to do a restore, but Windows guard eager to make the same update, leaving me in the same position with no display.

  What should I do?

  Hello

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  _____________________________________________

  Here's how to change the update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.