Problem with the update of the firmware WRT160N V2 for a PC running XP.

Similar Questions

• HP pavilion dv6-2150us: problems with the upgrade of processor for an i7-720qm on a hp pavilion dv6-2150us

  Hi all

  My friend recently bought an i7-720qm processor used to upgrade hp pavilion dv6 2 1 5 0 US and I

  summer giving a helping hand by making the upgrade.

  Since the 10 Windows running Google Chrome used up to 70% of the processing of an i3 - 330 m power

  processor, it seemed to be good upgrade to improve the performance of the laptop.

  We checked that the new i7 processor is compatible with the laptop (it is listed as supported by the)

  ( interview guide , page 108), and the seller assured us he tested the CPU on some different

  HP pavilion and it worked fine.

  But when I replaced the processor with the i7 processor i3 and tried to boot up the laptop, only the LED lights

  on the front and the setting of the power and volume buttons would light up periodically. The screen was black

  All the time.

  Thinking I might have made a mistake during the reassembly of the laptop I put the original i3 processor back in

  and it starts fine.

  I updated the BIOS of the F.1C version I found on the internet and once replaced the i3 with the i7 with the

  same results - display off, flashes periodically LEDs. The BIOS updated smoothly, and the correct version is displayed in the main menu of the BIOS.

  I am confused on what could be the problem with the upgrade, everything should work. Is there a BIOS update I have

  missed, or the problem elsewhere?

  Disassembly and reassembly are made with care, and we took care to avoid static electricity. All the rest

  on the laptop works well - I am writing this post on the laptop in question with the original i3 processor in place.

  Any help, advice or general guidelines as to what should be done would be really appreciated.

  Thank you for your attention.

  Hello:

  The problem is that if you look in Chapter 3 of the manual, pp 22-23, there are maps of separate used for the dual core and quad core processors system.

  In other words, you cannot install a quad core processor in a Board that originally had a dual core processor and vice versa.

• Problems with the generator of Folio for CS5 (Mac)

  Hello

  I run Adobe CS5 Suite. I am currently developing an iPad app and run into a problem with the generator of folio. Previously, this computer doesn't have a generator all of folio. I followed the instructions on adobe.com and downloaded and installed the update producer folio tools (http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5433 & starts = 5435) and then downloaded and installed the updated folio builder Panel (http://www.adobe.com/support/downloads/product.jsp?product=180 & platform = Macintosh). When I open inDesign, generator of folio is still saying "an update Is had to use Folio Builder."  "Please click here to download the producer Folio tools."

  I don't know why this is happening because I have already downloaded the new tools producer, by following these instructions: http://help.Adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f60-21ba9a4512e5e5e0b8d-7 ffe.html

  Anyone have any suggestions on how to fix this? Please let me know as soon as possible.

  Thank you very much for your help!

  Try the following steps:

  1. on your mac, go to the Spotlight, search > uninstall Folio builder control panel - uninstall, uninstall producer Folio tools research - uninstall.

  2 then uninstall Adobe Air.

  3. restart your Mac.

  4. install Adobe Air

  5 re-install the Folio and tools Panel generator producer Folio.

• Smart Safari search bar, problem with the option 'include suggestions for Safari '.

  Hi all

  I am facing a problem with the search bar Safari Smart of yesterday (January 26, 2016).

  The search bar doesn't work anymore, I can't type, or search or write an http address either. I can only navigate by selecting a bookmark.

  Go to preferences I have all the people with reduced mobility and the disappearance of the problem.

  Then try to isolate the problem, I've found it comes to the "include suggestions of Safari" option in the smart search options.

  Anyone had a similar problem, or have any suggestions on how to get it back to life?

  I must say yesterday, everything working, I have not installed anything new on my Mac.

  Thank you very much!

  Kind regards

  S. Luca

  Try the following steps:

  A possible solution to the problem of address bar: disable the Safari Suggestions

• Problems with the removal of password for stsrting upward

  problems with the removal of password

  Hello

  We can not help you with passwords in BIOS.

  You will need to contact the manufacturer.

  @@@@@@@@@@@@@@@@@@@@

  If it is the password of the user account, read this:

  "How to delete or change a password for a user account in Vista"

  http://www.Vistax64.com/tutorials/101986-user-account-remove-password.html

  See you soon.

• Dependency problem with the new Blackberry Plugin for Eclipse

  I just encountered a problem with the new version of the JDE Eclipse Plugin. I set up my application project so that it uses two other projects such as libraries. Both of these projects are on the way to build Java in the settings of the application project, and the manufacturer Eclipse compiles without errors.

  But when I try to run on the Simulator, the application loader throws an Exception stating that it could not find one of the classes listed in library projects. Since it is the importation of first class in the main class, I guess that it was unable to find the entire library.

  I tried to have the application project to import the project two library, but nothing alx files has changed.

  In the old version of the Plugin, there is a property of the project "Blackberry project dependencies" or something like that, which should be set for library and rapc.exe projects and the simulator would be their. That went away, and I was told during Devcon now suffice to add libraries to the classpath. Apparently, this is not so for me.

  Can you give me an indication of what goes wrong?

  The problem seems to be that I imported my projects since the previous version of Eclipse plug-ins, Blackberry. I have now created a new workspace and new projects, completely maintaining the source files, and it works.

• Problem with the trial of InDesign for Mac

  Hello! I have problems with the InDesign trial download to my Macbook pro. This works on my macbook air to friends, but now on my computer. What can I do?

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• Many problems with the runtime Adobe AIR for Android

  I created an application on Adobe AIR for Android platform, which requires for AIR. The app is very popular in the Android Market, but many users complain of problems with the installation of the Adobe Air runtime.

  For example, these users phones: LG LGE-P698, LG Pecan, HTC Wildfire. But judging by the fact that users have access to the installation of the Air, their phones are compatible with it.

  Tell me how to solve the problem?

  In addition, I have a few questions:

  1. Decides that the problem of demand for export with built-in AIR runtime?

  2. I have create my applications using ADT. In this case how do I seal AIR runtime?

  3. is it possible to invite the user to download and install older versions of AIR? Where can I find her?

  I hope I can help, because the problem is global.

  Hi Astraport,

  I think you should integrate the air in your application runtime,

  Some time ago I wrote a step by step guide, take a look at this post:

  http://forums.Adobe.com/message/3961579#3961579

  I hope it helps

• Problem with the firmware of my E270V1

  Hello world!

  I looked for a solution to my problem, but not been able to find one anywhere, so I post it here!

  Today, I got a Sansa E270 (6 GB).

  It seems to be a model V1. The firmware is 01.03.06P

  I would like to install rockbox on the player, but there is no way to put the player in msc mode. (No setting for this in the settings menu of the player)

  Then I tried to manually install a new version of the firmware in the recovery mode, but when the Player restarts after the update, it always says "Version 01.03.06P".

  Another strange thing is that the latest version of the firmware for the drive seems to be 01.02.24. This seems to be a lower version number than the version that came with my drive, although my version Date is August 2007, while the new Version of the site is April 2008.

  So here's my question: why Don t I a set of USB Mode in my player. How can I install a Firmware that allows the MSC support?

  Best regards

  Daniel!

  Looks like you have the Hebrew Beta firmware installed on your device.

  On your Sansa v1 voltage and see if you see the animation Lil' Monsta at startup.  This little guy:

  

  The Sansa can accept good firmware, since it does not recognize the new valid firmware filenames.  What is needed, it's a simple renaming of files as described here.

  The pp5022.mi4 file needs to be renamed to firmware.mi4 and the second file should be renamed pribootLoader.rom

  Remember, these names are case-sensitive, and it only to do for this initial repair.  Subsequently, your e270 will recognize the standard mi4 and rom file names, if you want to reload or change the version of the firmware in the future.

  Bob

• Problem with the Satellite C855-2EU for departure

  Hello

  When I start the computer the toshiba logo comes then she turnes
  All gray and then sometimes a clear blue screen with the text, but I can't read because
  It disappears fast then the toshiba logo comes up again and again
  Once again!

  Please could someone help me?

  I think you're talking about the blue screen (BSOD) shortages and the laptop crashes somewhere in the loop.
  In my opinion, this loop can be caused only due to hardware problems.

  I put t think its a software problem because Windows 8 includes a feature called auto repair recovery trying to automatically diagnose and fix common problems that can cause Windows 8 not start correctly. Auto repair starts automatically when Windows cannot start properly. Once launched, it will scan the various parameters, configuration options and system for settings files and corrupted files. If it finds anything, it automatically attempts to correct for you.

  Have you changed in the past something in the hardware configuration?
  Maybe a few upgrades of memory, etc.?

• Phone call about problems with the 315-633-3442 for scam program windows?

  Calls - call display unknown name showed & number.  Said I was outside and I could take a message :)

  They wanted to solve a problem with windows, when I called them back.

  I asked for her phone number - 315-633-3442

  Gave them no information - but they didn't know my name.

  Feels like a scam...

  Thank you

  If someone * COLD * you called and told me * you * you have problems - this is a scam.

  If you called someone and they later called you back - less likely to be a scam.

  Despite all the elders attempts-, we were unable to reconnect the webcams placed throughout your home/business/means of transport and matching clothes and all the means we have of your remote control system and follow everything that you do.

• Problem with the latest drivers ATI for T400

  I have a ThinkPad T400 2767-B75 with XP Sp3 with ATI Mobility Radeon HD 3400 Series.  (latest version of the BIOS)

  Just installed 8.771 - 100825 a-105152C in date 28/09/2010 and now get the following error every time putting into service or every time I try to enter the catalyst control center.

  ' Could not load file or assembly ' CLI. Implementation, Version = 2.0.3713.40381,
  Culture = neutral, PublicKeyToken = 90ba9c70f846762e' or one of its dependencies.
  The located assembly's manifest definition does not match the assembly reference.
  (Exception from HRESULT: 0 x 80131040) "

  ATI Catalyst does not load... I don't have my previous version of the driver (Version 8.712 - 100302 b-097094C) available and it is not on the site.

  I tried a roll-back of windows driver / reinstall etc with no luck

  No idea how to solve this problem or if there is a sine qua non for this driver?

  John

  OK, I removed all traces of the CCC (directories /... not removed by uninstall registry entries) and reinstalled. Follow-up to the recommendations of http://www.hardwareheaven.com/mobility-radeon-drivers-support/186707-problems-installing-catalyst-co... Works fine now... J

• Problem with the addition of bluetooth for PhoneGap connection

  I have similar issue to the topic found on this forum, I am trying to use the same library of don/BluetoothSerial to connect my phone (Redmi Note 3) with PhoneGap app for mobile robot based on the atmega. I have already programmed robot to move in response to orders received and tested on the terminal application. Now, I need to achieve this with the mentioned plugin.

  I created the project by default, installed the plugin with CLI and modified files:

  Index.html: http://pastebin.com/8FA4DTtW

  Index.js: http://pastebin.com/ivbmMZPa

  config.XML: http://pastebin.com/mFdmr0Tv

  Then I executed cordova platform add android (I don't know if this is necessary in this case) :

  AndroidManifest.xml: http://pastebin.com/iNTXF1hh

  I run the browser application to check the logs from the console, everything seems to be fine fine browser does not support bth:

  Received the event: deviceready

  (index): 68 bluetoothSerial.connect: 98:D3:31:40:06:5 C

  When I try to run it on App Developer PhoneGap, scripts are broken and I am not getting any event neither success nor failure. I would be very grateful if someone teaches me how to call this function correctly.

  Version of Cordoba:

  5.2.2 Android

  browser 4.1.0

  Thanks for your reply, the real problem turned out be the version of phonegap. I followed the steps in this thread and it allowed me to build and install the plugin correctly.

• Problem with the firmware (4.1.112.33292)

  Hello
  I have iomega ez & I installed the latest firmware (4.1.112.33292) but after my product to date, 2 times in a week was out of reach & I forced it disconnected and now I downgrade firmware for 4.1.110.33149 to solve my problem

  Hello arsham_th2,

  Looks like you are asking an imager?

  To do this, you will need to contact your local support:
  https://Lenovo-EU-en.custhelp.com/app/answers/detail/A_ID/14722

• Problem with the installation of drivers for HP 650

  Hi guys,.

  Can you help me with this problem. I have Windows 7 Professional installed on my 650 HP and installed all the drivers, but I can't install the drivers for the network, PCI Device controller and SM Bus controller.

   

  
  I tried several solutions, but none of them helped. I am writing you to this below 3 software problems hardware ID:
  

  Network controller

  PCI\VEN_168C & DEV_0032 & CC_0280

  PCI device

  PCI\VEN_10EC & DEV_5229 & CC_FF00

  SM Bus controller

  PCI\VEN_8086 & DEV_1E22 & CC_0C05

  It will be great if anyone knows a solution for this problem. I fight with this few days.

  I thank in advance and hope to hear from someone soon

   

  You are the very welcome.

  This is certainly the driver you need.

  Try the one directly from Intel.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+installation+utility&lang=eng