Problem with update of the system after running a registry cleaner

Similar Questions

• Satellite L750-201 - problem with update of the BIOS - preparation for Win 8

  I have a L750-201 and is eligible for Windows 8. Currently Windows 7.
  I thought that I would update to the BIOS (latest version 2.6) in the latest version (3.6), which has some relevant changes to Windows 8, I understand.

  I have downloaded the BIOS update file and run. I had several options. One of them was to make the update of Windows, and another was to create a boot CD to do at STARTUP.
  I created the CD and rebooted the machine with it. Everything seemed fine, but when the time came to Flash the bios I got the message about the battery must be greater than 10% and the power adapter is connected. If the BIOS update has refused to start.

  The problem is the battery was 100% or almost that I had just fully charged it. The power adapter is and powered. So whence the utility to update the BIOS get his info that the dough was less than 10%?
  I saw similar posts from other people, but the problem was usually that the battery was in fact less than 10% and that it was not charging. This isn't the case here.

  No matter, I thought, I can update the other sense through the windows.
  So I started the machine and took the Windows Flash utility. The system gave me the warning usual as planned and then rebooted the machine. He went directly in windows with the "Welcome" splash screen, and then stopped a few moments, then went to a black screen with just the pointer in the middle. I assumed it was something like the fairly active enjoy car light. However, after an age, nothing was. I could go back to the login screen by pressing the power button / standby machine and then turning it back on. My user has been locked, but I could shut down the computer and restart normally. Nothing serious happened. The machine starts very well and Windows does not normally, but BIOS remains unchanged.

  Anyone have any idea how to get the update of the BIOS to work? Seems I have to bypass the battery check or why BIOS thinks a battery of 100% is less than 10%.

  I have a L750-201 and is eligible for Windows 8. Currently Windows 7.
  I thought that I would update to the BIOS (latest version 2.6) in the latest version (3.6), which has some relevant changes to Windows 8, I understand.

  L750-201 satellite is part of the PSK6ME series.
  I wonder where you found the BIOS v3.60 for this device?
  The latest version of the BIOS seems to be v 2.80 - WIN

  

  So from my point of view you try update BIOS INCORRECT.

• Photosmart 6510: Problems with registration of the analyses after the installation of Sierra on the Mac.

  After the installation of Sierra on the iMac, it is impossible to save a scan. You can't send it to a card. The printer is not a problem.

  With my old iMac with OS Lion everything works as it should and there is no problem, so I think it has to do with not working is not driver problem?

  Hello
  The HP scanning application is not compatible with Sierra, so you may experience problems.
  Remove the HP scanning by moving it to the trash, then empty the trash.
  
  Instead install HP Easy Scan below, it will be installed in the Applications folder:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg
  
  If you experience additional problems, ensure that the latest version of the software is installed by following HP Easy Start below:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/applications/HP_Easy_Start.app.zip
  
  Finally, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
  Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.
  
  Kind regards
  Shlomi

• problem with connection to the internet after installing Windows 7 on new hard drive

  I have problem with old hard drive, so I change. I replace it with a new drive of the same size, so I download the Windows 7 disc to reinstall it. I received the product from the bottom of my laptop key. all look good, until when it is I can't connect to the internet. I can't find also manage network connections on my computer. When I go to "change the map settings" nothing is there. "when I go to connect to the network, not connected to the top pop, then I'm going to shoot bad to say" windows did not detect a network card installed properly, if you have a network card, you will need to re install the driver. "windows can't find a driver for your network card. Please help my fix to this problem. Thank you.

  You must download and install the driver for your network card.  It is best to get it fron the computer manufacturers web site.  You will have to get on another computer and copy it to a Flash DRIVE or a CD to run on your.

• problem with update of the number of lines

  Hello..
  
  Im very new to obiee and now to learn things.
  
  I'm using the following link to learn how to create a repository and work with it.
  
  http://www.Oracle.com/technology/OBE/obe_bi/bi_ee_1013/bi_admin/biadmin.html
  
  and im facing problem by updating the number of lines.
  
  get a dialog like...
  
  There was an error while updating the number of lines for "SH"... "" SH ". "" CHANNELS ".
  nQSError:17001Oacle Eroorcode:942, the message: ORA - 00942:table or view does not exist the OIC OCIStmtExecute call: select count (*) channels.
  Failed executing the statement nQSError:17011SQL.
  
  Wat could be the problem? can anyone help?
  
  thnx in advance

  Which account you use the update? SH? Check if the account has certain rights that tabel/view.

  concerning

  John
  http://obiee101.blogspot.com

• problem with update of the

  I got error 80073712 in update of the. I tried to fix it, but it appears that he cannot fix update please help. my system is 32 bit n os windows vista Home premium n I m remains to download the SP1 updates. pls help.

  Try the steps in the link

  Error code 0 x 80073712 occurs in Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/957310 >>

  UTC/GMT is 00:13 Sunday, January 6, 2013

• I have a problem with access to the computer after forgetting the password.

  Original title: I forgot my password to connect you now I can not access anything that has to with the hard disk drive please help... Computer is going to crash

  My laptop monitor is broken, so I stopped using it... haven't used in awhile... now I'm using again and not the password journal-gin admins that I remember... I tried everything... it of not that big of a deal... the biggest problem is that whenever I try to do something that has to do with the hard drive including anything, including updates or access to anything or change all the settings download, he asks for the admin password... My computer will cause crash soon I can't save anything without the password. Help, please!? WHAT SHOULD I DO?

  [Moved from comments]

  Hello

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• Problem with some of the tools after upgrade.

  I upgraded my windows XP to Windows 7.  After reloading my PS software, I get a strange thing is when I open the Psalm some of my tools (eg. zoom) turn into 3 small icons when I move the cursor over an image.  The tools still work, but it's very distracting.  I don't know what caused it, but nothing I've tried will get back to normal tools.  Anyone has any ideas on this?

  Based on DPI scaling above 100 percent in windows 7 can cause the problem too.

• Problem with moving of the objects after adding to the stadium

  Hello
  I am a student using a version of educational license of Flash MX, obtained through my University, as a prototyping tool. Everything has been fine until last night, when I learned that I couldn't anything reposition on the stage. I am something of a novice with Flash Mx and have been unable to find out what is the cause of the problem. I think I inadvertently used a combination of control keys to change a particular setting. The problem manifests itself first when I added a combo box from the components Panel to the stage and it is located in the upper left corner and refused to be moved!
  Any ideas gratefully accepted.
  

  This problem has been resolved.

• problem with update of the repository into account line

  Hello..
  
  I could not update the number of lines in the obiee administration tool while working online.
  I practice the document
  
  http://www.Oracle.com/technology/OBE/obe_bi/bi_ee_1013/bi_admin/biadmin.html
  
  I skipped the step
  and I tried following step
  
  Create a new measure
  
  right now I tried click on results.
  
  im getting error
  
  
  ODBC driver returned an error (SQLExecDirectW).
  
  Error codes: OPR4ONWY:U9IM8TAC:OI2DL65P
  State: HY000. Code: 10058. NQODBC SOL_STATE: HY000 nQSError: 10058 a general error has occurred. nQSError: Oracle 17001: 904 error code, message: ORA-00904: "T168 '. "" CHANNEL_ID ": invalid identifier in the OIC call OCIStmtExecute. nQSError: 17010 prepare the SQL statement failed. (HY000)
  SQL issued: SELECT time. "" Calendar year "saw_0"sales facts. " "" Amount sold "saw_1"sales facts. " "" Unit cost "OF SH ORDER BY saw_0 saw_2
  
  
  
  Thank you

  The error indicates, column "CHANNEL_ID" undetected in DB...

  Try to overlap the DB for this column

  Kind regards
  Rambeau

• Problems with colors on the screen after installing the new motherboard Vista

  Windows Vista Home Premium 32 bit wrong colors.  Monitor works fine.  If a monitor has checked and all colors were there.  Had installed a new motherboard.  Worked well for fivedays then the colors red and green disappeared again.

  * original title - want to get the correct colors on my display/ecran.*

  You don't say where the motherboard has come: the Mamufacturer of the computer, or that you buy yourself.

  Take the correct option:

  Go to the website of the manufacturer of your computer/motherboard > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Since the last update of Firefox, I don't see a security lock when I connect to my two web sites to secure Bank so am forced to use IE and the two banks said the problem with Firefox, not their systems.

  Since the last update of Firefox (Version 4.0.1) I do not see a security lock when I connect my two web sites to secure Bank so am forced to use Internet Explorer for internet banking. I contacted the St George Bank and the ANZ Bank and both say that the problem with Firefox, not their systems. They advise also strongly me to not perform Internet banking unless the security padlock closed is visible in the window secure. The padlock is not visible when I connect secure site of PayPal. Before the upgrade, this problem did not exist and there is no when I use IE. Firefox is my favorite browser.

  The status bar everything has been redesigned, so now allows you to check if the site is secure the box to the left of the address (green, blue or plain).

  The site identity button | How | Firefox help

  Further discussion on this change mention an add-on, you can use if you really prefer to see a lock:

  Firefox 4 where is the lower right corner of padlock | Firefox Support Forum | Firefox help

• Cannot start Windows 7 after the update of the system

  I don't speak of Windows 7 RTM, I know is RC forum but I downloaded the RC of microsoft's official website and I can't install it, it reached the "end of installation"(ou quelque chose comme ça) phase and blue screen of death appears, saying "memory dump" and other things. ". That's why I downloaded RTM from a torrent site, I installed it, everything was fine, the aero was not on so I that I should update the video drivers and then I downloaded all the updates possible (via the control panel), then I restarted the pc and now I am not able to load windows , it's blue screen of death! Notice that I can run windows 7 mode safe mode, but when I try to start it in normal mode the blue screen appears. BTW, I have windows xp installed on my pc as well. So, here is my setup:

  AMD 7750 dual-core 2, 7GHz
  4 GB of RAM, 800 Mhz, but the system says 3.25 alone can be used
  ATI 4730 512 MB, btw I have integrated graphics card (ati hd3200, I think), don't know if it's important but...

  Here is the information about the error:

  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.1.7600.2.0.0.256.1
  Locale ID: 1026

  More information about the problem:
  BCCode: 116
  BCP1: 871F13D8
  BCP2: 90C204B4
  BCP3: 00000000
  BCP4: 00000002
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 256_1

  Files helping to describe the problem:
  F:\Windows\Minidump\080809-15375-01.dmp
  F:\Users\blah\AppData\Local\Temp\WER-22953-0.SysData.XML

  Read our privacy statement online:
    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  F:\Windows\system32\en-US\erofflps.txt

  Here's the crash dump:

  Debug version of Microsoft Windows (R) 6.11.0001.404 X 86
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [F:\Windows\Minidump\080809-14921-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: * invalid *.
  ****************************************************************************
  * Loading of the symbol may be unreliable without a symbol search path.           *
  * Use .symfix to get the debugger to choose a symbol path.                   *
  * After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
  ****************************************************************************
  Executable search path is:
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************
  Cannot load the image \SystemRoot\system32\ntkrnlpa.exe, 0n2 error Win32
  WARNING: Unable to verify timestamp for ntkrnlpa.exe
  ERROR: Module load completed but symbols can be loaded for ntkrnlpa.exe
  Windows 7 Kernel Version 7600 MP (2 processors) free x 86 compatible
  Product: WinNt, suite: TerminalServer SingleUserTS
  By: 7600.16385.x86fre.win7_rtm.090713 - 1255
  Computer name:
  Core = 0 x 82803000 PsLoadedModuleList = 0x8294b810
  The debugging session: 11:50:54.734 Saturday, August 8, 2009 (GMT + 3)
  System Uptime: 0 days 0:00:19.343
  *********************************************************************
  * Symbols cannot be loaded because the path is not initialized. *
  *                                                                   *
  * The symbol path can be defined: *.
  * using the _NT_SYMBOL_PATH environment variable.                 *
  * with the help of the there when you start the debugger argument. *.
  * using the .sympath and .sympath + *.
  *********************************************************************
  Cannot load the image \SystemRoot\system32\ntkrnlpa.exe, 0n2 error Win32
  WARNING: Unable to verify timestamp for ntkrnlpa.exe
  ERROR: Module load completed but symbols can be loaded for ntkrnlpa.exe
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ..........
  Loading user symbols
  Loading unloaded module list
  .....

  Pirated Windows 7 allows malware, botnet zero-day ZDNet.com.url

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• Problems with HTML content in programs after the installation of KB2847204

  After this update for IE8 all HTML/HTM-app content will open in my default browser, rather than display it in the application.

  So my browser would point to for example: file:///C:/Users/***/AppData/Local/Microsoft/Windows/Temporary%20Internet%20Files/Content.IE5/***.
  I tried a system restore too before some updates, and it helped.
  Then of course Windows automatically installed all these updates again and tada... the bug was back.
  Then I uninstalled the KB2847204 update and all was good.
  I don't have any Internet Explorer installed, this is probably part of the problem.
  For the record, my problem was solved by uninstalling KB2847204.
  Evil Google HTML and browser had and to find relevant help, maybe I can help someone with this post.
  Key words: local URL opens in the browser, in-application content HTML automatically opens in the browser.

  Hi R.D. van der Linden.

  We appreciate the research you did to resolve the issue and thank you for sharing the solution. Hope this fix helps the other forum users encounter the same error. In case you experience other problems with Windows in the future, feel free to post your request here on the Forums of Windows, we will be more than happy to help you.

• After the system recovery running following a power outage, my user profile is lost. Unfortunately, he is also the administrator account. How to retrieve the profile or create a new?

  After the system recovery running following a power outage, my user profile is lost.  Unfortunately, he is also the administrator account.  How to retrieve the profile or create a new?

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner