problem with upgrade of database with read only tablespace

Similar Questions

• Problem with read/write satellite U400 - 12 p PSU40E DVD on LG GSA-U10N

  Hello again,

  Another serious problem is the LG GSA-U10N DVD combo drive that comes with mine U400. For some reason he has serious problems with reading and writing to DVD. Doesn't depend on whether the media is expensive or cheap. It seems to read and write all the CD very well, however.

  I would like to avoid leaving service point (can take up to 3 weeks or more), because I need this laptop all the time.

  Is there anything we can do about it?

  My system - Vista Home Premium 32 bit has been restored to factory default and then fully update the site of microsoft, outside pilots. In addition, no other movements driver update has been made. It's just that you want it to be.

  Greetings

  > Doesn't depend on whether the media is expensive or cheap.
  Not really

  My notebooks drive can handle a lot of different CD and DVD from different manufacturers, there are cheaper and more expensive DVDs.

  I had a good experience with TDK DVD-R discs. In most cases, the burning procedure could be completed successfully
  But I had some problems with the other DVD writing.

  I think the whole issue is compatibility between the laser lens and DVD-surface and that's why I recommend you several DVDs from different manufacturers.

  Goodbye & good luck

• create the user with READ only grant

  Hello
  10 g R2 on AIX.
  How to create users with READ only grant on all tables (or all tables in a schema with 70000 tables)?
  
  Thank you.

  Please refer to: http://www.ulfet.info/index.php?view=oracle.docs_grant.with.loop

• How can we put a database in read-only mode?

  DB version: 11.2.0.2
  Platform: AIX 6.1
  
  How can we put a database in read-only mode?

  Please read http://docs.oracle.com/cd/E11882_01/server.112/e25494/start002.htm#i1006490.

• Data warehouse backups and read only tablespaces

  Hi all
  
  I'm working on a database to store data with the following specifications:
  
  Version: Oracle Enterprise 10.2.0.3
  Operating system: Solaris
  Application: Data warehouse
  
  Allows us to take the "level 0" & "level 1" RMAN backups. " We block change tracking is enabled and data files and archival of backups RMAN records directly on tape.
  
  I'm exploring ways to reduce backups "level 0" and was specifically focusing on the use of read-only repositories for this purpose. ".
  
  I often saw that he mentions that a best practice D/Ws is to store old static partitions of tables of facts read only tablespaces in order to reduce the size of backups.
  
  
  In case you have already implemented such a scheme, I would like to know how you have implemented it.
  
  I think the following mechanism:
  
  -Start using the tablespace, rather than 'level 0' backups at the database level.
  -Save the last SNA of all files before saving.
  -If the last CNS has not changed since the last backup and the tablespace is in read-only mode, then
  -Check if a copy of backup storage space was completed within the window of recovery and is accessible.
  -If the copy exists, so backup tablespace, otherwise save the tablespace.
  -If the tablespace is read/write, and then save it.
  
  
  I have not drawn on the low-level details, but this seems to be a lot of work. I just know from you if there are any device ready to use which makes all this easier.
  
  Thanks in advance.

  go through the documentation of rman, you will notice that if you put 'optimize' (use CONFIGURE BACKUP OPTIMIZATION ON the rman prompt) he will perform following tasks automatically during backup.

  -Save the last SNA of all files before saving.
  -If the last CNS has not changed since the last backup and the tablespace is in read-only mode, then
  -Check if a copy of backup storage space was completed within the window of recovery and is accessible.
  -If the copy exists, so backup tablespace, otherwise save the tablespace.

• Problem with read (byte [], int int.) in BONE 5.0.0.604

  Is there a known issue with reading does not correctly in the latest versions of OS 5?

  I have an existing application that works perfectly on all devices 4.2.1 BB + OS... except for devices running the latest versions of OS 5.0.0 when I test on the Simulator for OS 5.0.0.604 (generic), I get strange behaviors using the read() method on the InputStream created from InputConnection.openInputStream () of an HttpConnection.  The problem occurs only when connecting using deviceside = true.  It does not affect MDS.  What I see is:

  read (buffer, index, length) fills a 1024 bytes of the buffer with the http response data internally.

  then, it ignores the first 152 bytes and returns the rest of 872 in the buffer parameter.  The returned value for the number of bytes read int is correct.  that is, 872.

  Subsequent calls to read() to return the same 872 bytes. ... He never advances through the flow to return the rest of the data.

  Method available() at any point returns the length of the http response (in this case, 2685)

  In all previous versions of the operating system, using the same code, it returns all the 2685 bytes in a single call to read()... I'm puzzled.  Also has anyone seen this behavior?

  I had problems similar to the 8830, but with an o/s 4.2 or 4.5

  Finally I changed my read() to read a single byte at a time, rather than a buffer and that solved

  My question.

  If I remember correctly, in my case, I knew the total length and was reading in pieces,

  move my shift in the buffer, the amount of data returned by read(byte[],init,int)

• problems with reading card compact flash

  Hey, I recently bought a mac and I have a problem with she read my cards compact flash. I have a 64 GB scan disk card and a canon 5 d mark II camera.

  I get the error message that disk was bypassed and that the files could not be read. so I can't transfer my photos on my mac. I can, however, transfer them on a pc and then on a usb key that works on my mac. but this isn't the solution. I contacted apple support and was on the phone with them for over an hour and still no solution... who can help me?

  First thing to try is getting the pictures safely out of the map and then using the command format of the camera to erase and reformat - this will usually solve this type of problem

  LN

• is anyone else having problems with reading or a frequency to chashes?

  playback is bugs audio cuts out for no reason, it may or may not start charge ram reading where it was started or anywhere in between also... also problems with AE 'read' the files when the time comes to render. He had no problem while working with them, but when it comes to accidents rendering and error message indicates that it cannot read the file... it's not real complicated, either this is a quicktime animation HD codec. I liked the 2014 AE version, better it is more solid. !

  The corrections after effects CC 2015 (13.5.1) update is available, with great difficulty to previews and more: http://adobe.ly/1Il5JYe

• Problem with tracking only on italics while exporting EPUB 3 FL

  It's all in the book looks pretty good. Except the separation between the words on those who are in italics.

  Anyone had this problem before?

  I use InDesign CC 2014. I tried with a local police force and a TypeKit fonts, and the problem persists.

  Thank you!

  Could check you this EPUB on some other iPad as well? This will help determine if it's a problem with your device only or some other problem that lack us here.

  Thank you

  POOJA

• Special statement in planning with read-only privileges.

  Hi all
  
  Our planning application users 'Planner' role. However, we then give special planning privileges so that they can report on the data. But we don't want them to make changes through ad hoc OAS reports. We want to update the data only through forms.
  
  It seems quite impossible, but is there a way that we can give users read access only to planning when doing ad-hoc reports? While allowing them to update the data through forms?
  
  Thanks in advance.

  There isn't any 'good' ways to do this, but here is a tedious method and a lot of maintenance...

  Create two users for each user ID. The first ID for them is used to enter data in forms, but do not set up this Userid with ad hoc features.

  Create the second user as they have read only access to the application, but make sure that this user what ID is configured with ad-hoc functionality.

  Like I said... not a great solution, but should work.

  -Jake

• Satellite M40X-184: problem with keyboard - only writes a character in 1 second

  Hello

  There is an interesting problem with my laptop, it cams with Xp Home edition with 1 partition, I used partition magic to create another and then format C:, after installation of XP Pro. Install drivers one by one, now when I try to write something in anywhere like msn, notepad or Word, she wrote just a character in 1 second;

  Like when I write "trial" he write in 5 seconds... Why what happened and above all how can I work this?

  Hello

  have you tried to uninstall the pilot how you installed? Maybe you should do this, I think it's probably just a software problem and no hardware failure.
  So you can also try to set the rate of your keyboard type in Control Panel-> keyboard control-> (delay repeat, repeat rate) and maybe it s just there a setting that needs to be corrected.

  Welcome them

• problem with reading Fuze & clip [resolved]

  I used some Fuze ver2 & clip ver1 & ver 2 and I have this problem with all of them in rockbox and original firmware, none of these players that I used the simple ability to play between folders when all the songs in a specific folder are played well stop playing so I have to manually browse to the next can folder (album) someone help me with this problem. all sansa players work like that or I don't know how to use them.

  peaceful1 wrote:

  Yes, no way to sovle inside original firmware or Rockbox? & It means for other players from sansa as clip clip ver.2 ver.1

  http://download.Rockbox.org/daily/manual/Rockbox-sansafuzev2/Rockbox-buildch7.html#X10-1280007.10

• Problems with reading the series bytes

  Hello

  I currently have a PIC18F microcontroller serial communication with LABview using the base read and write.vi series. The PEAK sends strings such as "V222! (V is the character of the header, and! being the end character). Then, I have a program to take each individual character read and concatenate them in a larger string for data extraction. The port has been configured to 38400 baud and be only a single byte of long.

  The captain sends this one byte at the time and the problem here is that LABview seems to be only reading V most of the time, and occasinally has 2. Since it doesn't seem to be never read the end character, the sequence of extracting data from my code is never executed.

  A few questions I have are:

  The captain may send one byte at a time, but also all other devices communicate through a serial port.  The definition of the serial port involves both a byte.  Actually it's really a LITTLE at a time.  But serial port parameters leads to the gathering of 7 or 8 bits to produce a byte.  The PEAK sends a follow-up byte to another byte, etc.  The time between shipments of the byte may be too small to read contiguously in your Labview program.

  At very slow speeds, it could really work.  At 300 baud (3mS / bit), there are 33 mS to send a byte (8-bit + stop bit, start bit).  So if your loop runs fast enough, you get every byte one at a time.  But there is the overhead of other code to store the bytes, etc..

  38000 baud to only 0.2 mS to send a byte.  LabVIEW is not fast enough to loop at this rate to capture all the bytes individually.

  But why bother?  Simply capture all the bytes and treat them as a complete message.

• Problem with reading file xls with text inside

  Hi all

  I have a problem to read the excel (xls) file with the first line containing chains of different length.

  I wonder how can I skip the first line and continue reading of the second line.

  Thank you very much.

  I only have saved VI.

  So here are the names.

  Downstairs: open the file.  Text reading file with lines of selected reading (right click for the menu to find).  Read the text file with lines of reading not selected.  Close the file.  At the top is spreadsheet String to Array.

• Problems with reading aloud; It is not more than 1 page

  Hi-

  In the old days, Adobe Acrobat Reader to be able to read whole books aloud.  I've got Windows 8.1 on a laptop cheap (meaning not a lot of memory), and even when I select 'read aloud' and then 'read the document will end' it stops at the end of the page. I tried to highlight a selection of several pages, and it will not always cross the line of the page.  It is pretty useless, if I press my computer every 2 minutes to go to the next page and press 'read out loud '.  Any ideas?

  PS I think it is reprehensible that in 2016, 26 years after the ADA, ADE still is not having a read aloud feature, or even just a supplement to convert into a non-savable format that can be read by the reader.  Adobe voice is much better than some other readers and made better with the odd punctuation, which is part of the reason why it should be made accessible.

  While they have not been marked for accessibility? Are you on Windows?

  You could try to recreate one using this method to see if she takes care of the problem:

  • Open a Word doc
  • Click on the Acrobat Ribbon
  • Click Preferences > general and make sure that enable accessibility and reflow with tagged Adobe PDF is enabled.
    
  • Click the create a PDF file

  Test the new PDF. There are several ways to create PDFs but PDFMaker (which adds the Ribbon Acrobat for Windows) is the preferred method and provides more control over the conversion.

  You can learn more about the preparation of files to meet the requirements of the ADA here:

  Adobe Acrobat DC accessibility features

  Using Acrobat Pro DC accessibility checker

  Creating an accessible PDF - Office Support

  We had the opportunity to create documents conform to 508 since Acrobat for years, but my observation is that most of my students have no idea how prepare files to satisfy, before coming to class.