Problem with verification

Similar Questions

• problem with verification of updates of windows, code 8024402f error how to fix?

  When I check the windows updates, it informs that "there is problem updates windows update" error 8024402F code, please help me

  Hello with this error
  On the page says update recent updates check says NEVER
  There is hope
  I will paste
  If the error 8024402f
  And on your update page wrote
  These latest control upgrade NEVER says
  There is hope
  You can try this. It's now all 48 hours because I found a possible solution to this day of 5 on 5 computers using Windows 7 64-bit and 3 of 4 with Vista have been fixed.
  I'll paste most of the information abit of a story.note should be on your page to update under control more recent for update said NEVER so then maybe hope.

  I had this problem as well and tried many recommendations, but none apparently worked. On the update box on my computer has recently tried update was NEVER.
  So if you have this perhaps it will work for you I tried a certain path with all have the same apparent result with error 8024402F coming.
  It is a such crazy crazy world that we live (murphies law seems to be in control.)
  Do the opposite which is logical
  First define your update affecting NEVER RECEIVE UPDATES, then UNCHECK the two boxes below if they are checked (a topic everyone can update,) and the other to be informed of the available updates. (That one a box Monte are you shore you want to not be notified etc..)
  NOW USING MURPHIES LAW leave all settings for example being NOTHING of WORK SHOULD
  NOW CLICK THE BUTTON UPDATE, SURPRISE SURPRISE, NOW, YOU CAN REFRESH. !!!
  After update, search for new updates after the first batch.
  Then the settings can be set back to normal for example receive updates automatically, check the other two boxes.
  Like you, I have Windows 7 64 bit.
  I had additional information in the event of no success, but appears that this first part works well

• Satellite P300-1 year - Touchpad problem with AC adapter / CC

  I have a laptop Satellite P300-1 year and from the beginning (two weeks)
  I have a touchpad problem: it will not immediately responsive and the pointer shakes when pressing the key. Very often, it freezes for only one or two seconds.

  It's VERY annoying. A USB mouse works perfectly.
  I tried to reinstall the drivers of the ALPS, tried Synaptics ones, just try Windows Vista drivers: no way.

  Now, I found the reason: this question is present only when the laptop is powered by the AC adapter / CC.
  With the battery, the touchpad is perfect.

  I contacted Toshiba Service and thay said that they do not change the AC adapter if I don't mean before a full system restore!
  Is it not more simple just try with a new adapter and then only, if the problem persists, try more drastic procedures?

  Anyone had this same problem?

  > I contacted Toshiba Service and thay said that they do not change the AC adapter if I don't mean before a full system restore! Is it not more simple just try with a new adapter and then only, if the problem persists, try more drastic procedures?

  The point is that your laptop should be always verified using the Toshiba factory setting.
  Why? Because the ASP wants to make sure that this issue is not related to a software problem (compatibility problems with applications 3rd part). Software problems are not covered by the warranty.

  In addition the ASP will always recover the laptop before the verification of the pieces of equipment to malfunction. Therefore, you should always back up your data from the HARD disk until you send the laptop to check.

  I recommend you to reinstall the operating system using the Toshiba recover disc and then check if the problem appears.
  If yes you can contact ASP and could provide all the necessary details for only one technician.

  Good bye

• Problem with TSSTcorp TS-L632D TO04 CD/DVGW stoped burning CD and DVD

  Hello world! The problem is basically just, he doesn't want to write/burn any cd/dvd brand more. He works wonders for little over a year and recently developed this problem. I'm sure that's not media brands I've tried with several. The problem with Nero, Alcohol120%, MagicISO, PowerISO, Burn4Free, regardless of what I am trying to burn data, audio, regular programs or images. Note that I am able to write with alcohol with success but there is in fact nothing on the CD and Nero burns the data also but fails to verify after the fact and gives an error. Writing on DVD R/RW is completely failed, creating coasters. Also the Player opens without reason and when he wants. I have laptop Toshiba A200 - 1 MB under original Vista Home Premium. Here's an error report, hopefully it'll help. Thanks and any assistance is much appreciated!

  Windows Vista 6.0
  IA32
  WinAspi: -.

  NT-SPTI used
  Nero Version: 9.2.6.100
  Internal Version: 9, 2, 6, 100
  (Nero Express)
  Recorder: Version: TO04 - HA 1 YOUR 0 - 9.2.6.100
  Adapter driver: HA 1
  Drive buffer: 2048kB
  Bus type: Via inquiry data
  CD-ROM: Version: TO04 - HA 1 YOUR 0 - 9.2.6.100
  Adapter driver: HA 1

  = Scsi-device-map =.

  = CDRom-Device-map =.
  TSSTcorp CD/DVGW TS-L632D E: CdRom0
  =======================

  AutoRun: 1
  Excluded drive IDs:
  WriteBufferSize: 83886080 (0) bytes
  BUFE: 0
  Physical memory: 2037 MB (2086276 KB)
  Free physical memory: 864 MB (885052kB)
  Memory used: 57%
  QUERIES PFiles: 0x0
  Global Bus type: default (0)
  Control supported media: disabled (0)

  13.10.2009
  CD-ROM (ISO)
  02:27 A. Â? ? Â? #1 text 0 file SCSIPTICommands.cpp, line 452
  LockMCN - completed successfully for IOCTL_STORAGE_MCN_CONTROL

  02:27 A. Â? ? Â? #2 text 0 file Isodoc.cpp, line 6940
  ISO document burn settings
  ------------------------------------------
  Determine maximum speed: TRUE
  Simulate: FALSE
  Write: TRUE
  Finalize the CD: FAKE
  Multisession: TRUE
  Multisession type: Start multisession
  Burning mode: TAO
  Mode : 1
  ISO level: 1 (Max. of 11 = 8 + 3 char)
  Character set: ISO 9660
  Joliet: TRUE
  Allow pathdepth more than 8 directories: TRUE
  Allow more than 255 characters in path: TRUE
  Write ISO9660; 1 file extensions: TRUE

  02:27 A. Â? ? Â? #3 text 0 file Burncd.cpp, line 3257
  TSSTcorp TS-L632D CD/DVGW
  Super link activated

  02:27 A. Â? ? Â? #4 ISO9660GEN-11 file Geniso.cpp, line 3349
  First address writeable = 0 (0x00000000)

  02:27 A. Â? ? Â? #5 text 0 file ThreadedTransferInterface.cpp, line 1017
  Removed 2 blocks from end of track 0. Length: 2885-> 2883.

  02:27 A. Â? ? Â? #6 text 0 file Burncd.cpp, line 3587
  Turn on Track-At-Once, using CD-R/RW media

  02:27 A. Â? ? Â? #7 text 0 file ThreadedTransferInterface.cpp, line 1017
  Removed 2 blocks from end of track 1. Length: 2885-> 2883.

  02:27 A. Â? ? Â? #8 text 0 file ThreadedTransferInterface.cpp, line 1017
  Removed 2 blocks from end of track 1. Length: 2885-> 2883.

  02:27 A. Â? ? Â? #9 text 0 File DlgWaitCD.cpp, line 294
  Media in the drive type: unknown
  Write speed more up/down CLV: 3 x / 1219560 x
  Recorder min/max supported write speed: 4 x / 9226724 x

  02:27 A. Â? ? Â? #10 text 0 File DlgWaitCD.cpp, line 313
  Last possible write address on media: 359846
  Last address to be written: 2884

  02:27 A. Â? ? Â? #11 text 0 File DlgWaitCD.cpp, line 325
  Write in overburning mode: No. (enabled: CD)

  02:27 A. Â? ? Â? #12 text 0 File DlgWaitCD.cpp, line 2882
  Recorder: TSSTcorp TS-L632D CD/DVGW;
  Code CD - RW: 00 97 10 00; CD manufacturer unknown
  ATIP data:
  Special Info [hex] 1: D1 00 C6, 2: 61 a 0, 00 (LI 97:10.00), 3: 4F 3 b 4 a (LO 79:59.74)
  Additional info [hex] 01:02 4A B0, 2:5 C6 26, 03:00 80 80 (invalid)

  02:27 A. Â? ? Â? #13 text 0 File DlgWaitCD.cpp, line 500
  > Protocol of DlgWaitCD activities:
  =========================================

  02:27 A. Â? ? Â? #14 text 0 file ThreadedTransferInterface.cpp, line 744
  CIS (after recorder preparation)
  0: TRM_DATA_MODE1)
  2 indices, index0 (150) not provided
  #0 + 2885 (2885) original disc POS = 2885 # / 0:38.35
  relocatable, pos to drive for the cache-write implementation not required / required
  -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2883 blocks [E: TSSTcorp CD/DVGW TS-L632D]
  --------------------------------------------------------------

  02:27 A. Â? ? Â? #15 text 0 file ThreadedTransferInterface.cpp, line 946
  Prepare [E: TSSTcorp CD/DVGW TS-L632D] for write in TAO
  DAO infos:
  ==========
  MCN:
  TOCType: 0x00; Closed disc, session not obsessed
  Titles 1 to 1: Idx 0 Idx 1 next Trk
  1: TRM_DATA_MODE1, 2048/0 x 00, FilePos 0 307200 6215680, ISRC ""
  Introduction DAO:
  ===========
  ___Start_ | ___Track_ | _Idx_ | _CtrlAdr_ | ___Size_ | ___NWA_ _ | _RecDep___
  -150 | Lead-in | 0 | 0x41. 0 | 0 | 0x00
  -150 | 1. 0 | 0x41. 0 | 0 | 0x00
  0 | 1. 1. 0x41. 2885 | 0 | 0x00
  2885 | Lead-out | 1. 0x41. 0 | 0 | 0x00

  02:27 A. Â? ? Â? #16 text 0 file ThreadedTransferInterface.cpp, line 1017
  Removed 2 blocks from end of track 1. Length: 2885-> 2883.

  02:27 A. Â? ? Â? #17 text 0 file SCSIPTICommands.cpp, line 242
  SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME

  02:27 A. Â? ? Â? #18 text 0 file Burncd.cpp, line 4320
  Caching options: cache CDRom or network-Yes, small files-no)<>

  02:27 A. Â? ? Â? #19 phase 24 file dlgbrnst.cpp, line 1767
  Caching of files started

  02:27 A. Â? ? Â? #20 text 0 file Burncd.cpp, line 4442
  Cache writing successful.

  02:27 A. Â? ? Â? #21 phase 25 file dlgbrnst.cpp, line 1767
  Caching of files completed

  02:27 A. Â? ? Â? #22 phase 28 file dlgbrnst.cpp, line 1767
  Speed measurement started

  02:27 A. Â? ? Â? #23 text 0 file ThreadedTransferInterface.cpp, line 2676
  Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #0

  02:27 A. Â? ? Â? #24 text 0 File ThreadedTransfer.cpp, Line 273
  Size of the memory pipe 590400

  02:27 A. Â? ? Â? #25 phase 29 file dlgbrnst.cpp, line 1716
  Speed measurement completed: 307.7 x (46? Â? ? Â * 160 KB/s)

  02:27 A. Â? ? Â? #26 phase 36 file dlgbrnst.cpp, line 1767
  Burn process started at 4 x (600 KB/s)

  02:27 A. Â? ? Â? #27 text 0 file ThreadedTransferInterface.cpp, line 2676
  Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #0

  02:27 A. Â? ? Â? #28 text 0 file MMC.cpp, line 21875
  Set BUFE: Super link-> ON

  02:27 A. Â? ? Â? #29 text 0 File ThreadedTransfer.cpp, Line 273
  Size of the memory pipe 83836800

  02:27 A. Â? ? Â? #30 text 0 file MMC.cpp, line 17311
  Start narrow-gauge #2

  02:28 A. Â? ? Â? #31 text 0 file DVDPlusDualLayer.cpp, line 1424
  SetDriveCaps: Set LAST LBA of layer 1 to 0

  02:28 A. Â? ? Â? #32 phase 37 file dlgbrnst.cpp, line 1767
  Burn process completed successfully at 4 x (600 KB/s)

  02:28 A. Â? ? Â? #33 phase 78 file dlgbrnst.cpp, line 1767
  Data verification started

  02:28 A. Â? ? Â? #34 text 0 file ThreadedTransferInterface.cpp, line 1017
  Removed 2 blocks from end of track 1. Length: 2885-> 2883.

  02:28 A. Â? ? Â? #35 text 0 File ThreadedTransfer.cpp, Line 273
  Size of the memory pipe 590400

  02:28 A. Â? ? Â? #36 SPTI-1064 file SCSIPassThrough.cpp, line 215
  CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1064)
  CDB data: 0 x 28 00 00 00 00 00 00 00 01 00 00 00
  Key: 0x05 (KEY_ILLEGAL_REQUEST)
  Printing Code: 0x21
  Meaning of Qual: 0x00
  Sense area: 0 x 70 00 05 00 00 00 00 0 to 00 00 00 00 21
  Buffer x0a5a6500: Len x 800

  .................................................. .................................................. ............
  .................................................. .................................................. ............

  02:28 A. Â? ? Â? #279 SectorVerify 20 file Cdrdrv.cpp, line 11185
  Sector 0 to 1055 read errors

  02:28 A. Â? ? Â? #280 CDR-1222 file Writer.cpp, line 203
  Checking abandoned, too many errors
  E: TSSTcorp TS-L632D CD/DVGW

  02:28 A. Â? ? Â? #281 phase 81 file dlgbrnst.cpp, line 1767
  Data verification failed

  02:28 A. Â? ? Â? #282 text 0 file SCSIPTICommands.cpp, line 289
  SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

  02:28 A. Â? ? Â? #283 text 0 file Cdrdrv.cpp, line 11243
  DriveLocker: UnLockVolume completed

  02:28 A. Â? ? Â? #284 text 0 file SCSIPTICommands.cpp, line 452
  UnLockMCN - completed successfully for IOCTL_STORAGE_MCN_CONTROL

  Existing drivers:

  Registry keys:
  HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon

  Post edited by: velkoto

  Post edited by: velkoto

  Try to remove the CD/DVD filters in the registry.
  When the associated CD/DVD (such as iTunes, Nero, virtual CD software), the software is installed, they install filters in the registry, which can cause compatibility problems.

  (1) run Regedit (start-> Run-> Regedit)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).

  This utility can remove the filters for you:
  http://www.CSD.Toshiba.com/content/support/bulletins/su2065061/RmvFltrs.exe

  Also remove the dust on the lens with a clean Microfiber cloth.

• Problems with the help of control Edit Expression with tab control

  Hi all

  I am facing a strange problem when using Expression Edit Control with a tab control.

  When I put the Expression of the RichEdit controls on several tabs in a tab control, and when I run the application, the Expression Edit controls in a single tab are visible, others get invisible! I do NOTHING with them, but they do not simply show upward!

  I first faced this problem using Expr editing controls in Visual Studio c#. NET - with tab controls. For verification, I created a simple VI is LabVIEW to see if the problem is with my request / problem with Expression Edit controls in c#, etc. But voila!  A similar behavior in LabVIEW too! 

  I'm doing something wrong? OR do not do something right? Ask someone for help please ASAP!

  Thanks a ton in advance!

  DASI

  PS: Attached the VI here (LabVIEW 8.5) just download and run it, and you will see probably what I'm talking about!

  
  

• Call of duty modern warefare 2 problems with windows 7, is not playing as well as he has done for my last computer, it is not lag as many it is, not as the real game

  Call of duty modern warefare 2 problems with windows 7, is not playing as well as he has done for my last computer, it is not lag as many it is, not as the real game

  have you checked on the memory of our pc? Call of duty modern warfare needs at least 2 GB of memory, another thing you need to consider is your video card in your pc windows 7. try to update the first video card drivers. verification of your memory.

• Problem with windows update and Service pack 1 for Vista 32 bit.

  A screen will appear that says I need to download the Service Pack 1 for Vista. He also says that it is more optimal to download the much smaller file, through Windows Update, rather than on the site. But when I check the Windows Update, it did not for me to download. Update verification that history does not display it has been downloaded before, even if the other Windows updates have been. Do I need? Should I download the version + 400 MB of site or there at - it another way to download smaller files for my PC only? Any help appreciated. Thank you! Here is the text I copied and pasted pop up I got.

  ------------------------------------------------------------------------------------
   
  A problem with Windows Vista
  Windows Vista has stopped working properly.

  This problem has been corrected in Windows Vista Service Pack 1 (SP1).

  What is a service pack?

  An update to software that combines new security and performance with existing updates improvements. Service packs can contain new features or changes to the design of a product.

  To resolve this issue, follow these steps:
  Determine if your type of operating system 32-bit or 64-bit.

  How will I know if my system type is 32-bit or 64-bit?

  Click the Start button, right-click computer, and then click Properties.

  Under system, you can view the system type.

  The average of 32-bit and 64-bit?

  Both 32-bit and 64-bit refer manner that your computer (CPU) CPU processes information. The 32-bit versions and 64-bit Windows are designed for use in computers with 32-bit processors or 64-bit, respectively.

  For more information, go online and read this article for Windows Vista online help:

  32-bit and 64-bit Windows: frequently asked questions

  Check online at Microsoft Download Center to download and install Windows Vista Service Pack 1:

  Windows Vista Service Pack 1 for 32-bit systems
  Windows Vista Service Pack 1 for 64-bit systems
   
  -------------------------------------------------------------------------------

  In the end, P.S. - know what long and thank you in advance for taking the time to read and respond.

  In addition, unrelated question. Does anyone know why my computer would always have an icon in the lower right shows a storage device mass that I did not and when nothing is plugged into ONE of my USB remove locations?

  Ralleny,
  Regarding mass storage disks that appear, you have housing of memory card reader on your PC?  Usually they will appear like this.  I have a HP at home that has a Bay of 5 card reader to the front and I see the same type of items that you see. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with Windows Update on Vista SP1 32 - bit Error: 0x8007000D

  Two updates have been failing install for me for several weeks. I finally decided to try to understand what is happening, and I'm stumped at this point.

  The updates are:
  Update cumulative security for Internet Explorer for Windows Vista (KB969897)
  Internet Explorer 8 for Windows Vista

  These two with an error code of 0x8007000D

  I tried almost everything I can think of, scanned for virus/malware, scandisk, verification of the SFC, several difficulty different sound of Microsoft, I even cleared out / reset Windows Update with several different methods and has run the system preparation tool.

  Then, I tried to install Vista Service Pack 2, perhaps thinking that might help - would not install either.

  The ie8_main.log contains the following:

  00:00.249: started: 2009/07/21 (A, M, J) 22:15:46.875 (local)
  00:00.281: time Format in this newspaper: MM:ss.mmm (minutes: seconds.milliseconds)
  00:00.312: command line: 'C:\Windows\SoftwareDistribution\Download\Install\wuiesetup_prereq.exe' /wu
  00:00.468: INFO: checking for C:\Windows\SoftwareDistribution\Download\Install\wuiesetup_prereq.exe version: 8.0.6001.18702
  00:00.561: INFO: Package Installer Mutex acquisition
  00:00.593: INFO: operating system: Windows Workstation: 6.0.6001 (SP1)
  00:00.593: INFO: Vista the operating system detected. Service pack major: 1, minor SP: 0, name of Service pack: Service Pack 1
  00:00.608: INFO: check if you have installed the battery update service
  "00:00.608: INFO: SSU version regvalue found: ' 6.0.6002.18005.
  00:00.624: INFO: Servicing stack update found. Permanent installation
  00:00.624: INFO: check the prerequisites
  00:00.639: INFO: met prerequisites: Yes
  00:00.639: INFO: checking for C:\Program may Explorer\iexplore.exe version: 7.0.6001.18000
  00:00.655: INFO: C:\Program may Explorer\iexplore.exe version: 7.0.6001.18000
  00:00.671: INFO: check if s iexplore.exe version current is between 8.0.6001.0...
  00:00.671: INFO:... .and 8.1.0.0...
  00:00.686: INFO: version Maximum on which to run IEAK branding is: 8.1.0.0...
  00:00.686: INFO: success check iexplore.exe version. Proceed with the installation.
  00:00.702: INFO: checking for C:\Program may Explorer\iexplore.exe version: 7.0.6001.18000
  00:00.702: INFO: version for C:\Windows\system32\mshtml.dll check: 7.0.6001.18183
  00:00.717: INFO: version for C:\Windows\system32\wininet.dll check: 7.0.6001.18148
  00:11.481: INFO: EULA accepted
  00:11.497: INFO: user successfully completed the scenario WU. Exit with return code 322376503 so WU will install IE8
  00:11.497: INFO: install return value: HR = 0 x 13371337
  00:11.513: ERROR: installation exit code: 0 x 13371337 (Undefined error Code).

  and the CheckSUR.log file contains the following:

  =================================
  Preparation of control system was updated.
  Binary version 6.0.6001.22375
  Package, Version 5.0
  2009-07-21 20:03

  Checking deployment Packages

  Audit of manifest Package and catalogs.

  Checking package watchlist.

  Control of component watchlist.
  (f) CBS registry 0x8007000D Package_1_for_KB944533 error ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.1.944533 - 4_RTM_neutral_GDR enumeration child package failed, index: 9

  Verification of the packets.

  Control components store

  I tried to remove the KB944533 and get an error. I have also tried to install a copy of the KB944533 but told me that it wasn't the version appropriate for my version of Windows.

  I am at a loss and no longer know what to check. I guess that there is a corruption in the registry (or system files) associated with KB944533, but I can't figure out how to get the installation routines for give me more detailed information.

  Any help would be greatly appreciated. While my PC is functional and I have no other problems with it, I would like to be able to try IE8 at a given time.

  Thank you
  -Al

  Success!

  I finally understood what was going on. This is a damaged registry entry.

  The registry entry for the key:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Component based Servicing\ComponentDetect\x86_microsoft-windows-ie-setup-support_31bf3856ad364e35_0.0.0.0_none_e9aaaad1a6a385a4

  content, which was supposed to be a string value entry for:
  Package_1_for_KB944533 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.1.944533 - 4_RTM_neutral_GDR

  Unfortunately, it was not of type "REG_SZ" but altered with a type of
  0 x 40000001, which was identified as a binary key.

  I could not initially remove/change the key, therefore, found some instructions on how to reset the permissions on your registry using a Microsoft tool called: subinacl

  After the race I could rename the bad registry entry and add it back in manually, by giving the appropriate string value.

  Now, I was able to install IE8, so I think everything is resolved. Going to update to Service Pack 2 for Vista soon.

• Problem with Microsoft wireless mobile mouse 4000 scroll will not scroll on any computer?

  My mouse does not scroll vertically, but it scrolls horizontally. I tried different mouse on this computer and they are all scroll very well and I tested this mouse on different computers and it won't yet scroll. I followed through all the utilities provided on this site (checking the HID, reinstalling the software, verification of parasitic programs, etc.) and nothing has worked. Is there something else I'm missing?

  Hi Vjenkins,

  As the mouse does not work on different computers and other mice work on this computer, it seems that there is a problem with the mouse itself.

  Sinceyou have followed the steps mentioned in article to resolve problems with the mouse button or scroll the parameters, I would suggest that you contact Microsoft hardware support for further assistance.

  Hardware support

• Connection problem with Windows Live

  Recently, a change has been introduced whereby it asked me to confirm my mobile number so that MS can send me a verification code that fits into a security process probably intended to check my Windows Live Sign On, however, it happens that it is not possible to select a mobile phone in my country (Malta, European Union).

  I would also like to point out that even though I select Remember me, remember my password within logon, Windows Live Messenger still brings me my username and password for my Windows Live ID account (* address email is removed from the privacy *); This is why does not remember my login credentials.  This happens on my laptop running Win XP SP3.
  
  I also noticed that I am getting a problem of logon failure, when I try to login to my HP iPAQ which runs on Windows Mobile 2003.
  Hi Emil_d76,
   
  I recommend you post your query in Windows Live Messenger Forums for assistance with this issue.
   
  For the problem with Windows Mobile, post your query in Windows Phone Forums.

• I have a problem with repeated download of KB2633171 since 12/15/11, all successful. How can I stop it?

  I have a problem with repeated download of KB2633171 since 12/15/11, all successful. How can I stop it?

  I tried MS FIXIT - but the problem persists.

  Vista 32 bit

  Hello

  Have you checked the State of the KB2633171 in the history of Windows updates?

  Method 1:

  You can read the following article and try to run the islet fix verification.

  The problem with Microsoft Windows Update is not working

  Method 2:

  You can also scan [SFC] System File Checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  You can also consult the following wire link and check if it helps.

  change the default location of the windows updates

• Problem with the disk check.

  32-bit Vista Home Premium:

  About 6 months ago, I ran a Check Disk from my C drive (using Vista error checking tool) and checked the two boxes before starting (fix Auto file system and search for errors / attempt to recover bad sectors).

  He ran through the 1 5 6 controls without finding an error.

  On the 6th and final verification that it is running, it hung (or the 4th of 5 controls it works - do not remember if it is 5 or 6 it works). According to me, he started the final control, but stopped and none did not move. A few hours later he still hadn't moved, so I did a hard stop.

  Fortunately, everything was fine when I rebooted.

  I use the computer since then without problems/errors obvious hard drive, but I'm afraid to run another check of the disk, even though I would right now.

  Suggestions are welcome as to what might have caused the shot, and if I do another check of the disk.

  Yes, it's essentially the same command.  Personally, I never use the other method - I just use the one that I you provided.

  : You are right about the meaning switches - you already know or you're an awfully good guesser.  Since you have expressed interest, here's more information on CHKDSK you might find of interest with other switches and guidelines and some good information on how it works and how to use the results: http://www.vistax64.com/tutorials/67612-check-disk-chkdsk.html.

  If you cannot complete a cHkdsk on your hard drive, then there is a problem with the player that must be resolved before it is any worse.  I would definitely give it another chance and also run the diagnostics that I recommended in a previous post.

  I hope this helps and I hope that the test completes successfully this time.  If this isn't the case, I hope that the diagnostic test identifies the problem and it can be repaired than replaced (even if it's pretty rare - usually if it goes wrong it must be replaced).  If this is the case, I would as soon as possible to ensure that it is not so bad that you can no longer access the drive at all - but then again, there may be nothing wrong and we could be worrying for nothing but a bad block or two which is nothing to worry about in itself.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• M1000e with M610 Blade. iDRAC6 problems with the upgrade of the firmware 3.50 (Build 4) - "image downloaded missed the check" error

  I have the blade that is a M610. its current 3.30 iDRAC6 Firmware version (Build 17), his version of BIOS is 6.0.7. I am trying to upgrade the firmware to 3.50 iDRAC (Build 4). I am upradging by the MCC on the M1000e chassis. I choose the slot of in that the blade is and then start the IDRAC GUI. I choose firmware update and select the firming.imc file that I used successfully on some other M610 blades. After about 30 seconds, he returned with the following error.

  The uploaded image has no verification

  Why?

  I came across the same problem (with a refurb M610, iDRAC firmware has been 2.20).

  I tried to upgrade the iDRAC6 firmware to 3.60 via the web interface of iDRAC6 and it was a no go.

  I tried several browsers (chrome and firefox) and same problem each time.
  I tried to go to firmware (as shown in the accompanying note) 2.31 instead of 3.60 and same question every time.

  I finally managed to update the firmware of the iDRAC6 by upgrading the web interface M1000e and not in the iDRAC6 web interface.

  It worked the first time (using Chrome).

• Worst experience with verification service

  Hello

  I really need someone to help out me but not give me a number to contact verification service.

  Last week, I ordered a 13 Alienware and it comes with a free TV.  When I checked the status of the order this week, he showed my orders have been cancelled, but I have received no message, phone calls from DELL. So I discuss with a representative and he told me that he didn't have access to the details of the order, but it can help me make a re-order.  So I just ordered them again.

  However, the new order of TV cancelled again without any messages. I contacted Customer Service DELL asking what happened to new orders. In the response e-mail, they explained TV got cancelled by audit issues and the laptop was waiting by the problem of verification, and they gave me the number of the Department of audit.

  Yesterday, I've called and explained my situation. What they told me, was that there is no problem with my orders, but it is different from the information that I have received the email and the website. So, I asked them could they double check my orders, they said yes and just hung up. I thought that they could hang up the phone accidentally so I called them again. Same thing happened, they just hung up after getting my order number. I don't know if it's because I'm not a native speaker and they might can not understand me. Then I discuss with a representative to ask is there any problem with my orders, he said that only the Department of audit can help me.

  Well... so I called the Department of audit on four times yesterday afternoon (they hung twice), finally, they said that they had already turned my laptop and retired from the TV. However, if I check the status on the Web site or by talking to a rep, it lists still canceled TV and laptop has confirmed, but put on hold. The representative said: "only the Department of audit can help you." I was so frustrated when I saw "contact the Audit Department. But I had nothing else to do, except calling.

  This morning, I've talked to the audit service once again, for the seventh time now. They even told me that there no problem with my orders but when the representative helped me check the State, two of them still had questions of verification and I learned again and again "Just checking Department can help you."

  I am a user of Alienware for eight years and this is the worst experience I've ever had. I wonder now if the Audit Department really works on solving problems. I love DELL products and their online customer service, but the service with the service of verification is not rosy. What should I do now to get my orders processed?

  Hi Edwardc17,

  I understand your frustration about the attempt of Dell to protect your resources. If there was a bad purchase, we would much rather or cancel delay control and someone denied the opportunity to take advantage of your good credit record. There is a fine line to balance the quick product shipping vs illegal purchases. Long-term, I think you would agree that it is better to err on the side of caution.

  A wedge of audit cannot be circumvented. You must talk with them, to address the issue of verification and then place a new order if necessary. You can contact the order audit team by calling 1-800-571-3355.  If your order has been cancelled and must be re-booked, you can call 1-866-383-4713.

  Thank you
  Lorna

• Only intermittent problem with wifi on alienware m17x with qualcomm wireless killer

  Hi, I have an alienware M17x with windows 8.1 and qualcomm wireless killer. I have a serious problem with intermittent wifi, that appears when I use programs like Skype, steam, multiplayer games, etc.

  Even if the wifi is connected, the connection suddenly stops working sometimes, especially when I use the applications mentioned above. (if I try to load a Web page during this time, the page remains attached to "resolving host"). Strange thing is if I disconnect and reconnect to the wifi Internet starts working immediately. Or I can wait a few minutes and the connection is re-established automatically. This isn't a problem with the network, because I had this problem on countless wifi networks I've worked, and all my other devices work fine in the same time, that my laptop no longer works.

  Additionally, this problem occurs only on wifi, if I use a connection cable, this never happens. (this is not yet a case of the wifi signal strength, as happens even when I am sitting right next to wifi router and wifi in the notification area icon is visible full signal).

  In the last months, I tried various possible solutions, but none of them have solved this problem:

  -Updated to 8.1 windows

  -Update of the qualcomm network drivers

  -Stop of various applications that I think might have been the origin of the problem

  -Uninstall completely different applications

  -Close all anti-virus programs

  Still after all of these steps, the problem persists. It would not be a big problem, as the loss of connectivity is not permanent, but what makes multiplayer games completely unplayable on my alienware machine. :(

  Just today I tried to launch AlienAutopsy test for my network card in Killer Wireless - N 1103 several times, and each time that the "transfer of data verification test" failed due to no connectivity (all other tests passed very well, only this one test failure all 6 times). I thought that it could be linked and gave me some hope that I might be able to target the cause of this unique problem. Therefore, I post here. If anyone can help me, it would be much appreciated!

  +++ S.O.L.U.T.I.O.N. +++

  «Go to network-> Network and Sharing Center-> change the adapter settings-> Wireless - N 1103-> properties (right click) Killer network card-> and finally UNCHECK it (the f * cking) "Qualcomm Atheros control bandwidth «»

  Enjoy the rush.

  See you soon