Problem with VM cloning

Similar Questions

• Problem with stamp cloning tool in CS5?

  Hello

  I'm having the darndest problem I have never met before. I use the cloning tool in CS5 and I'm trying to clone stamp a portion of the photo and clone in another part of the picture. The problem is that after I option click on and then drag it to the part I need, dark spots appear in the place? What's not here? Here is an example. Thank you.

  I am under Photoshop CS5 for Mac with the latest updates.

  

  We can't quite see in your image, but you have the blending mode for the tool clone set to difference maybe?  Otherwise go to leave the top drop-down list in the Options bar and see if you have presets for this tool and reset.  If none of this helps, the time to reset the preferences file (Shift Cmd opt as you open Photoshop)

• I have a problem with the cloning tool, when I retusch to digital photos. When I hover over the image with the cloning tool it slightly changes the picture and ruin. -What someone knows how to configure the tool so it doesn't ruin the image when moving be

  Hi there I do retusch on digitized images and when I move the tool between the dust spots cloning it changes the image slightly. Just noticed and got a wedge after working for several days.

  -Does anyone know how to put the cloning tool to avoid this chang during the movement of the tool on the image?

  Very grateful for an answer

  Anders

  It is possible that your Source region is quite different from the target area that the Clone tool is not the most effective use.

  Another reason is that you have put a sample of Clone of hard edge.

  I suggest you use the Spot Healing Brush tool to remove dust spots and see if that solves the problem.

• Problem with the cloning of a server to http Linux Ubuntu 8.04 JEOS 32bits

  Hello world

  I'm not sure where to post this question so here's.

  Evaluating System Center. One of the generation of functions is cloning a server. I have several 32-bit Ubuntu JEOS http servers. I would like a clone. When I do, the virtual machine is cloned, but when I start it, all network connectivity is broken.

  In other words, when I run the command: ifconfig eth0, all I get is the loopback address. DHCP does not work, he dies not a static address.

  Must I vi anything in the vmx file?

  Any pointers would be helpful.

  Thank you!

  Peter

  Here is the message

  http://communities.VMware.com/message/1256624#1256624

• Problems with firefox and new Seagate SSHD

  I recently installed a new Seagate 1 TB SSHD into my computer, it's the new generation of hard drives with built in 8 GB SSD cache. I cloned my old install and everything seemed to work ok

  I use firefox with Yahoo answers and regularly answering questions. If I answer a question and press on submit my answer is displayed correctly. If I then try to change my answer and press on submit again that my initial response is displayed and not my answer updated. If I change my answer once again the update response appears after one or two attempts. It seems that there is a problem with the way firefox and this new drive interact with each other.
  I uninstalled firefox and deleted all associated data files and made a new installation that actually no difference
  I am running version FF 26
  Windows 7 64 bit
  4 GB OF RAM
  AMD Athon x 2 64 6000 dual core

  The problem did not happen with my original hard drive, nor is it with Internet explorer or Chrome
  I have suggestions would be appreciated.

  David Gaguine

  Thanks, but my router does not have a cache and it does not explain why the problem started with the SSHD and is OK with a standard SATA drive.

  Clear the history after that outputs FF has not worked.

  I think I'll contact seagate support and see if they have similar reports or waiting for the firmware for the drive update

  David

  P.S. I have now to lower my head in shame, I discovered that the problem occurs on other machines, it must be something to do with my network or on the Yahoo site itself not FF or new hard drive happily.

  I apologize for wasting everyone's time

• Problem with Delete Subproperty

  I wanted to delete a global container of Station with stored results init.

  The expression I used is

  StationGlobals.StoredResults.DeleteSubProperty (Parameters.Step.Name, 0x400000)

  Parameter.Step.Name is my search string. and in the Option property tried to use 0 x 400000 substitute variable Notdeletable.

  Problem here is that it works for the execution of a few as there is no problem in removing the Subproperty for 4 or 5 times. After that it only removes subproperty.

  And the same problem, I did not see in OperatorMode. This problem only occurs in the sequence editor. I use TestStand Ver4.2.1.

  Is there no work around for this or any other option to forcefully remove the subproperty.

  Thanks in advance,

  Christian M

  Larsen and Toubro Limited

  Mysore. India.

  Hi Share_Good,

  He had some problems with the file you attached. I made a few changes that seems to make it work the way you want and simplify things. I added comments to help explain changes in the file. Please let me know if you have any questions about the changes. I was unable to reproduce the error you posted, but I think that these changes could solve the problem, because one of the issues that I fixed in question is not cloning the property you obtained using GetPropertyObject before setting another property that has as it's the suproperty (property can have one of their parents If you need to make a copy and store the copy not the original). Also, make sure your Locals.StepResult is a variable of object reference as I have in the file attached sequence rather than a container.

  I also created a version of the file, SequenceFilePostResultListEntry2.seq, that uses an array of containers to store the results instead of the subproperties, allowing the stage names to be anything, including having spaces and '.' characters.

  Hope this helps,

  -Doug

• Problem with Top SQLs report

  Hello

  I have a big problem with Top SQLs reports, when I generate a report of high SQLs, SQL, the value text is not end, I know that there is a "The SQL text size" setting on the properties of the agent (this configuration is also on the collections setting ' Ta maximum size in characters of the short collects text of the SQL statement is ") on the two options , I've incremented the value of 256 (default) 1500, but when I generate the Top SQLs postpones continue it problem, once the changes I restarted the agent but the problem persists, I generate the report on the different formats, but result is the same, could you help me please.

  Thank you.

  Best regards.

  I see this in support KB article https://support.software.dell.com/kb/109536

  "

  • Title

    SQL in DB2 Top instructions are truncated in the delivered report of Top SQL

  • Description

    SQL in DB2 Top instructions are truncated in the delivered report of Top SQL

  • Resolution

  • Resolution A DDB-3673 request improvement with Support software Dell to show the full text of SQL high in the report Top SQL for DB2.

    Workaround At this point you should be able to make a custom report by cloning the Top SQL existing and then customizing report. »

  I know that this is not the solution, more of an explanation and guidance on how to solve this problem by using customizations.

  Golan

• Problem with disk management.

  To increase the size of drive, I installed win 7 64 bit from a cloned on a WD Green 3 TB hard drive backup.  When I go to disk management I have the following: Disk 0: base / system reserve 1.87 GB NTFS healthy, "C:" 2046,13 GB NTFS healthy, no Boot affected 746,52 GB.

  I could not wish 'C' in the unallocated space.  Is this possible and if so, what is the procedure?

  Thanks for the help

  There is a specific problem with windows that imposes a limit of 2 GB on hard drives. This can be overcome by using a GPT partition table, but then needs a UEFI BIOS in order to boot from it.

• Skyline view 6: problem with PBM subsystem

  After you have created a pool of floating, automated cloning, full view 6, I get an error in the procurement process:

  Commissioning error: problem with the PBM subsystem during profile creation FULL_CLONE_DISK_FLOATING_04350771-c750-434-b-a855-39ff56f300e5

  When manually creating a machine virtual model, it works (including the specification of customization).

  Create linked clones, works.

  The database of the event chronicle not anything worth mentioning. He said only that complete clones cannot be put into service.

  Unfortunately, I tried Googling on 'VMware View PBM subsystem', but without real success.

  Did someone ever encountered an error like this?

  Thanks in advance.

  Johan van Amersfoort

  VMware View PBM stands for "policy-based management.

  When you use Virtual SAN, you can set the virtual machine storage needs, such as performance and availability, in the form of a policy. The policy requirements are then pushed down to the virtual layer SAN when a virtual machine is created. The virtual disk is distributed in the virtual SAN data store to meet the requirements.

  When you clone a VM directly there is no PAF in the image.  Please check the policies once.

  Please see: vSphere 5.5 Documentation Center

• Problem with deletion of snapshots

  Hello

  I have a problem with deletion of snapshots for virtual machine running on ESXi 3.5. I had a problem with the lack of free space on the drive where VM is hosted. I managed to free up space and wanted to commit snapshots (delete) to free additional space. Unfortunately, at the time of the withdrawal of clichés that I ran out of space again on this store now I'm stuck with clichés present in the store but not visible in the Snapshot Manager.

  Any suggestions on how I can get rid of these pictures now? All I can think is move VM converter of this virtual machine to a new one.

  Thanks, Marcin

  The reason that you ran out of space is the way a "Delete All" is handled.

  I guess in your case a 'Delete All' may temporarily need up to approximately 115 GB of additional disk space. Troubleshooting VM snapshot problems perfectly describes the process. Take a look at the animation in the "process behind 'Remove all' snapshots '.

  So what you can do is:

  -Free up enough space, create another cliché, and then do a "Delete All".

  -Cold clone or V2V the VM in another data store

  -Recreate the vmsd file based on the instantaneous channel from the header vmdk files and delete the snapshots one by one starting with the first (oldest) snapshot. If you want to try this make sure you fully understand other snapshots that it will end in the corruption of data!

  Due to the size and the possible impacts on the storage I recommend doing this during peak hours and with the virtual machine shut down.

  If you have a different available datastore (~ 300GB), I would recommend cloning. This does not affect the original files in case something goes wrong. If the clone works, you can safely remove the "old" VM and files and migrates the virtual computer is back to datastore original.

  André

• problems with, phone, 6, Bluetooth kit, Nissan, after update, for, Rios, 1.0.2

  After the update to ios 10.0.2 - trying to use bluetooth to call my vehicle, it says: "this article is not in your phone book." How can I solve this problem?

  Greetings, joybelino1!

  Thank you for joining the communities Support from Apple! I can't wait to see that you are having problems with your Bluetooth in your car! The good news is that Apple has a great article that will help you with measures to try to resolve the problem. Read this article to gethelp to connect your iPhone, iPad, or iPod touch with your car radio. Even though he talks about problems with the connection, it also has the steps for other questions you may have once connected.
  
  

  If you use Bluetooth

  1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
  2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
  3. Restart your iOS device.
  4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
  5. Update your iOS device.
  6. Install the updates to the firmware of your car radio.
  7. If you still not connect, contact Apple technical support.

  Have a great day!

• Anyone having problems with WiFi connectivity after upgrade to Sierra?

  I was wondering if anyone else knows issues with WiFi connectivity since the upgrade to Sierra 10.12? I have not had any problems with connectivity WiFi previously on El Capitan. Now I have regular randomly loose connectivity. My internet is cable and when it is connected I have a 100% connection. My details of iMac and I have used only 10% of my storage.

  

  No problem with my iphone 6.

  Hello AspDesigns,

  I understand that, since the upgrade to Mac OS Sierra, your Mac seems to have trouble staying connected to Wi - Fi. Fortunately the diagnosis built-in wireless can help identify the source of so much trouble.

  Search for Wi - Fi using your Mac problems

  See you soon!

• Problems with mail after switching to macOS Sierra

  Hey all

  After having recently upgraded to macOS Sierra, I am unable to read my mail.

  I get the following error every time I check on "Get Mail".

  There may be a problem with the mail server or the network. Check the account settings "*" or try again.

  The server returned the error: Mail could not connect to the server 'pop1.tribcsp.com' using SSL on the default ports. Verify that this server supports SSL and that your account settings are correct.

  What does this error message mean and how can I solve this problem.

  Thank you

  Hi Michael,

  I see your message that you get an error in the mail indicating that there is a problem with the mail server or the network.  To help get this problem resolved, I suggest that you follow the steps below:
  

  If mail refers to a problem with the mail server, or the network

  Mail will say that it is impossible to connect due to a problem with the mail server or the network. For example, the message may refer to a connection that has expired, or too many simultaneous connections:

  

  If you are connected to the Internet, but the connection has expired, your email provider might be affected by a discontinuance of service. Contact them or see their status Web page to ensure that their e-mail service is online. Examples of status pages:

  • iCloud mail status
  • Gmail status
  • Status of Yahoo mail
  • Status of the AOL mail
  • Status of Outlook e-mail

  If the message indicates the number of simultaneous connections, too many of your devices is check your e-mail account at the same time. Quit Mail on one or more of your other devices.

  If you are still unable to send or receive e-mails

  1. Make sure that you have installed latest version of the Mac software updates, especially if the problem occurred immediately after the installation of a previous update.
  2. In OS X El Capitan or later version, you can see a status icon and the short error message in the upper right of the Mail window, under the search box. The message may indicate 'Network offline' or 'Connection failed', for example. Click the message to see more details on the issue.
     
  3. Check your connection to the Mail connection doctor. It might be able to say more on the issue.

  If you cannot send or receive e-mail on your Mac.

  Take care.

• iMac 27 "mid-2011 - Intermittent problem with CPU fan running at full speed and sleep mode.

  Hello!

  My iMac 27 "has an intermittent problem with the CPU fan runs at full speed. Sometimes it happens at the time when I start it, sometimes only in my session, and sometimes only after a certain time. So does seem to be a problem of "heating".

  Second issue is with the mode 'sleep'. It may occur also at any time, at the start of the iMac, session, or after a certain time. But once he starts to go in mode 'sleep', when I wake up, it goes right back in mode after a few seconds and that it will continue indefinitely until I restart the computer.

  What could be?

  Please help me!

  4ntoine

  Here is my model of iMac:

  iMac 27 "mid-2011 model 12.2

  Intel Core i7 3.4 GHz

  AMD Radeon HD 6970M 1024 MB

  OS X El Capitan 10.11.6
  SMC 1.72f2

  Boot ROM IM121.0047.B23

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• problem with playing the clash of clans

  I'm having some problems while playing the clash of clans on my 2 mini ipad screen does not seem to meet sometimes as if it was some sort of delay so I have to tap several times in order to use a filter or throw the troops on the battlefield.

  Hi Trinitygr,

  Thanks for posting in the Community Support from Apple! I understand that you are having problems with your iPad screen while playing a game. I like to play games on my iPad and I don't see how this could be a nuisance. I'm happy to offer assistance.

  Are you only had this problem when using the app clash of Clans, or does it happen in all applications? I recommend to start by following the steps described in this article:
  If an application you have installed unexpectedly closes, unresponsive, or does not open

  Take care!