Problem with disk management.

Similar Questions

• Problem with Lifedrive Manager on a Machine MS Vista

  I used my Lifedrive for a long time since a MS Windows XP Home Office successfully.  This summer, I got a new laptop which has Windows Vista Home Premium.  I am able to use the Palm Desktop software and hotsync for the XP desktop and laptop of Vista.  I am, however, problems with Lifedrive Manager.  Whenever I start the laptop, I get a message that the machine could not initialize "PalmOneRemoteLibrary."  I ignored the message because I could do everything I needed up to today.  When I tried to start the LifeDrive Manager (impetus provided by a message that asked that I install my photos using LifeDrive Manager), I got the PalmOneRemoteLibrary error message.

  I realize that this machine can be a relic, but I really like it, and I did a lot of use of it.  My LifeDrive machine runs Palm OS Garnet 5.4.8.  I recently put a mass of images on the internal drive using 'Training Mode'.

  Am I correct the LifeDrive Manager is inevitably incompatible with Windows Vista, and which is the source of my problem?  Any difficulty that I could try?  Any other ideas?

  Hello blue8star and welcome to the forums of Palm.

  The LifeDrive Manager application, unfortunately, is not compatible with Windows Vista.  Palm said they aren't going to release a update for the abandoned PDA.  (By the way, I have a palmOne LifeDrive and always use it often.)

  To load on the LifeDrive bulk data, you have the right idea, use the Drive Mode.

  Alan G

  Message is about: Treo 755 p (Sprint)

• Problem with disk utility...

  After upgrading to Mac OS Sierra custom poster disk utility looks like more detailed information about what is on my Macintosh HD, only a blue strip for the used area of the disc and the white for the empty area. Any suggestions?

  Try to fix permissions of drive with disk - Apple Support utility

  Ant then reset the management system (SCM) controller on your Mac - Apple Support

• Problems with disk Satellite pro 4200 hard assembly

  I have problems with a Satellite pro 4200.
  The Notbook reads no more disks. Undercarriage I traded the loan, but did not work. Undercarriage is addressed, but it is read the discs is not possible or formatted. Also, an update of the Bios is not possible, as undercarriage reads no more disks.

  CU
  Eltgen

  Hi Eltgen

  Sorry, but it is not easy to tell what the problem is on that path. If I understand you well you have built in a new floppy drive, because the old one was faulty. Am I wrong?

  It will be interesting to know is the new part already used. Perhaps is the new one also defective. I hope that a little light is on if you put the disc inside.

• Cannot extend the C drive with disk management

  Hey Microsoft Community.

  I am trying to increase the size of my C drive with management of the disks, but when I right click on it her "Extend Volume...". "is grayed out.

  After having read the answer on this page, I decrease the D drive and create a disc of J of free space.  I move all the files to the D drive on drive J, but there are some files system (about 4 GB in size) that I can't move.  When, in disk management, I right click on the D drive, «format it...» "as well as"Delete Volume... ". "is grayed out.

  -----

  What should I do?

  Thanks in advance,

  JemFish

  You must use a third-party tool like EASEus partition magic 10.x

• Problem with disk space C or WinDir

  Hello

  I have problem with space Partition C:\

  Because the driver does not match the photo below?

  And now the disk space is full of unreasonable.

  

  Please help me!

  Hello

  I don't see what your problem is, as you're singling out a piece of data, the program (x 86) files on which is placed on your hard drive.

  Where do you think that Windows 7, etc is installed?

  It is installed on the C: drive and also takes place on it.

  ___________________________________________________________________

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  Also check how much space system restore uses:

  http://Windows.Microsoft.com/en-us/Windows7/how-much-disk-space-does-System-Restore-require

  _____________________________________

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  _____________________________________

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And Norton Backup, if you are using Norton, can do strange things with filling of hard drive space.

  See you soon.

• Zoo Tycoon 2 ultimate collection-problems with disk 2.

  Hey my laptop is Asus brand and I have windows 8. I have zoo tycoon-ultimate collection, and it worked fine on my last laptop. Disc two usually run on my computer and it comes up with error 1305 error reading the file. I looked in other forums to help, but none of them seems to fix the problem I have. Can someone help me please?

  Hello

  Welcome to the Microsoft community. I appreciate your efforts toward resolving the issue. I would like to ask you some questions for a better understanding of the issue.

  1. Are able to install the game on another computer using the same disk?

  Try and copy the contents of the disc in your computer and then try to install it. If you are not able to copy the file, it could be a problem with the drive itself.

  Alternatively, you can try to install compatibility mode. After you copy the configuration from the disk file, try the following steps.

  a. right click on the driver file and select Properties

  b. Select the Compatibility tab

  c. place a check next to run this program in compatibility mode and select the operating system in the drop-down list.

  d. let the driver to install, and then check the functionality.

  If you need additional help, let us know and we would be happy to help you.

• Problems with the management of the CSC/Cisco (associated with SSO) site

  Dear friends,

  I came across a problem with single sign - on (SSO) used in the Cisco's Web site and CSC which begins to be more and more awkward:

  1. I visit the CSC and connect you to reply to a thread. Then I start to reply to a message.
  2. In response, I need to consult the technical documentation, guides, configuration or other documents on Cisco's Web site. In another tab in my browser, I visit the Cisco's Web site and do my search/navigation.
  3. At some point, Cisco's Web site acknowledges that I am already connected to the CSC and begins to produce URLs with the /partner/ inside component (for example in the search results). By clicking on this URL causes me be redirected to the page of connection again. This is the first question - why do I have to log in again because I am already connected and SSO is supposed to take care of this?
  4. Well, I re-enter my credentials, get connected, access the necessary document, then I go back to my post on the CSC, finish it and submit it. KABOOM - CCS quickly informs me that I am without permission to perform this action, lose my answer in the process! Logging on to the Web site (as described in step 3) Cisco obviously invalid my current session on CSC! I need to connect again to the SCC (until I do that, she considers me as a guest once again, but when I click on the login link, I suddenly make me connected without enter my credentials) and, well, write again my answer. Sometimes, a part is recoverable, but usually, it is only a small fragment.

  Would it not be possible to correct this behavior? I lost a lot of time my lost rewrite responses.

  Best regards

  Peter

  Hi Peter,.

  I wanted to give you a quick update on the two issues.

  First question:

  We are currently working on a long term and short fix for this problem. Unfortunately the long-term solution will be a drawn out effort as we begin our new data of all content in our heritage Center. The team is currently testing the short-term solution, will keep you posted on the progress that I get more details.

  Second question:

  We currently do analysis of the root causes of this problem and give you updated each week on this issue that deploy us the patch.

  Thanks a lot again for you continued support and patience.

  Sainaba.

• Problem with creative management account?

  I've been on creative cloud since 01/01/2016 (LR & PS). Last month, I receive a notice from Adobe everytime I open LR, indicating that there is a problem with my account plan and my last payment (June) has not been charged. NO explanation of what the issue actually is, I checked my card information of credit on my account plan, everything correct, even entered the details to make sure.

  Continue to receive this error notice, without any explanation, with the addition of a meter running backward until my account will cease to be active.

  I now have 6 days left.

  I was twice in contact with Adobe helpdesk, twice they promised the team counts would return to me by e-mail.

  So far - no email, no responses, don't explain - and the meter keeps running!

  Use a browser that allows cookies and pop-up windows, please contact adobe for hourly pst support by clicking here and, when it is available, click "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• Problem with disk on the computer management.

  Hello Sir,

  I get my phone by using the dell recovery, but after the end of the recovery. My volume (E) again a disk partition has been converted to the OEM Partition due to that I can't see and access this drive so please help me to get my all data and access this drive. Please tell me hoe to convert this OEM in main partition.

  Hello Paresh,

  Thanks for posting us at Microsoft Community.

  After my research, if you perform a factory settings on the computer then all data will be erased.

  Please see the note referred to in the link of Dell Support.

  http://www.Dell.com/support/troubleshooting/us/en/19/KCS/kcsarticles/ArticleView?docid=608277

  Unfortunately, it is not possible to recover data if you have a recovery system to factory settings.

  However, you can use third-party online software to recover lost or deleted data.

  Note:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope that the information provided is useful. Let us know in case you need more help.

• Problems with Recovery Manager and wireless

  Hey everybody,

  I have an a HP Pavilion dv7-1245dx with Vista 64 bit.

  My HARD drive crashed after that the computer was hit. I bought a replacement hard drive, but could not use the HP Recovery Manager because my recovery disks were lost when I recently moved into a new House.

  I managed to get the Vista desktop of base up and running again, but without video card or wireless capability. To resolve this problem, I tried to re - install my drivers for hardware manually via

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2100&LC=en&cc=us&DLC=en&sw_lang=&product=3860...

  However, whenever I try to install Recovery Manager, I get say an error message: "this Setup program cannot be installed on this system, Installation with abandon!" InstallShield.

  Also, I tried to download and install all drivers wireless on the HP site, but I can't always operational wireless capability. Even after that I installed all drivers, Device Manager still does not recognize the wireless device.

  Any thoughts on solutions to these problems? Buy the HP recovery disk or install a new operating system Windows 7 would help solve these problems? Is it possible any other hardware become damaged when the computer was hit, and that is what causes these problems? Thank you.

  -NDEco

  Vidya,

  This problem solved-I had the drivers for the wireless and then updated the rest of the material from there. Thanks again for your help!

  -NDEco

• Problem with Update Manager

  My system is running on VMware vSphere 5.1 (most recent) U1.

  I tried to update the host ESX (host State), but it failed with the error message:

  Patches of the scene to entity rvc-esx-01

  The host returns esxupdate error code: 15. The package manager transaction is not successful. Check the Update Manager logs and logs esxupdate for more details.

  I checked the esxupdate.log and there are many messages of error as follows. Please help me to identify the problem.

  I thank you very much.

  2013 05-28 T 06: 48:27Z esxupdate: HostInfo: DEBUG: check the file system on altbootbank...

  2013 05-28 T 06: 48:27Z esxupdate: vmware.runcommand: INFO: RunCommand called with: args = "[' / sbin/dosfsck ', '-a ', '-v ',' / dev/disks/naa.600508b1001cfd08a4849f06984fd8a2:5'] ', outfile = 'None', returnoutput = 'True', timeout ="0,0 "."

  2013 05-28 T 06: 48:27Z esxupdate: HostInfo: DEBUG: dosfsck dating 1

  Output: dosfsck 2.11 (March 12, 2005)

  dosfsck 2.11, 12 March 2005, FAT32, LFN

  Check the last sector of the file system, we can access

  Content of boot sector:

  ID of the system "MSDOS5.0".

  Byte media 0xf8 (hard drive)

  512 bytes / logical sector

  4096 bytes per cluster

  2 areas

  First FAT starts at byte 1024 (sector 2)

  2 fatty acids, 16-bit entries

  128000 bytes per FAT (= 250 sectors)

  Root directory begins at byte 257024 (district 502)

  512 root directory entries

  Data area starts at byte 273408 (sector 534)

  63929 data clusters (261853184 bytes)

  64 heads, 32 sectors/track

  0 hidden sectors

  total 511968 areas

  Fats are distinguished, but seem to be intact. Using FAT first.

  imgdb.tgz

  Contains a free cluster (39115). Assuming that the expressions of folklore.

  imgdb.tgz

  File size is 32029 bytes, the length of string cluster is 0 bytes.

  Truncate a file of 0 bytes.

  s.V00

  File size is 119879581 bytes, the length of string cluster is 109858816 bytes.

  File truncation

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: an exception error esxupdate was taken:

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: Traceback (most recent call changed):

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: file ' / usr/sbin/esxupdate ", line 216, hand-held

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: cmd. Run()

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: File "/ build/mts/release/bora-1065491/bora/build/esx/release/vmvisor/sys/lib/python2.6/site-packages/vmware/esx5update/Cmdline.py", line 144, in the term

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: File "/ build/mts/release/bora-1065491/bora/build/esx/release/vmvisor/sys/lib/python2.6/site-packages/vmware/esximage/Transaction.py", line 243, in InstallVibsFromSources

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: File "/ build/mts/release/bora-1065491/bora/build/esx/release/vmvisor/sys/lib/python2.6/site-packages/vmware/esximage/Transaction.py", line 345, in _installVibs

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: File "/ build/mts/release/bora-1065491/bora/build/esx/release/vmvisor/sys/lib/python2.6/site-packages/vmware/esximage/Transaction.py", line 388, in _validateAndInstallProfile

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: File "/ build/mts/release/bora-1065491/bora/build/esx/release/vmvisor/sys/lib/python2.6/site-packages/vmware/esximage/HostImage.py", line 639, at the stage

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: File "/ build/mts/release/bora-1065491/bora/build/esx/release/vmvisor/sys/lib/python2.6/site-packages/vmware/esximage/Installer/BootBankInstaller.py", line 672 in StartTransaction

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: File "/ build/mts/release/bora-1065491/bora/build/esx/release/vmvisor/sys/lib/python2.6/site-packages/vmware/esximage/Installer/BootBankInstaller.py", line 302, in Recover

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: ERROR: InstallationError: ("," there was a file system on altbootbank of error checking, see log for details ".)

  2013 05-28 T 06: 48:27Z esxupdate: esxupdate: DEBUG: < < <

  2013 05-28 T 06: 48:32Z esxupdate: vmware.runcommand: INFO: RunCommand called with: args = ' [' / sbin/esxcfg-advcfg ', '-q', '-g', ' / UserVars/EsximageNetTimeout "]', outfile = 'None', returnoutput = 'True', timeout ="0.0 ".

  2013 05-28 T 06: 48:32Z esxupdate: vmware.runcommand: INFO: RunCommand called with: args = ' [' / sbin/esxcfg-advcfg ', '-q', '-g', ' / UserVars/EsximageNetRetries "]', outfile = 'None', returnoutput = 'True', timeout ="0.0 ".

  2013 05-28 T 06: 48:32Z esxupdate: vmware.runcommand: INFO: RunCommand called with: args = ' [' / sbin/esxcfg-advcfg ', '-q', '-g', ' / UserVars/EsximageNetRateLimit "]', outfile = 'None', returnoutput = 'True', timeout ="0.0 ".

  2013 05-28 T 06: 48:32Z esxupdate: esxupdate: INFO: -.

  Command: scan

  Args: ["scan"]

  Options: {'nosigcheck': zero, 'Retry': 5, "loglevel": zero, 'cleancache': None, 'viburls': zero, 'meta': ['http://172.29.137.20:9084/vum/repository/hostupdate/csco/csco-VEM-5.1.0-metadata.zip','http://172.29.137.20:9084/vum/repository/hostupdate/vmw/vmw-ESXi-5.1.0-metadata.zip'], 'proxyurl': None, 'timeout': 30.0, "cachesize": zero, "Valentina": True, 'maintenancemode': None}

  2013 05-28 T 06: 48:32Z esxupdate: BootBankInstaller.pyc: INFO: value not recognized 'title = loading VMware ESXi' in boot.cfg

  2013 05-28 T 06: 48:32Z esxupdate: BootBankInstaller.pyc: INFO: /altbootbank/boot.cfg: bootstate goes from 0 to 3

  2013 05-28 T 06: 48:33Z esxupdate: vmware.runcommand: INFO: RunCommand called with: args = "[' / sbin/bootOption ', '-rp'] ', outfile = 'None', returnoutput = 'True', timeout ="0,0 "."

  2013 05-28 T 06: 48:33Z esxupdate: vmware.runcommand: INFO: RunCommand called with: args = "[' / sbin/bootOption ', '-ro'] ', outfile = 'None', returnoutput = 'True', timeout ="0,0 "."

  2013-05 - 28 T 06: 48:33Z esxupdate: downloader: DEBUG: download http://172.29.137.20:9084/VUM/repository/hostupdate/CSCO/CSCO-VEM-5.1.0-metadata.zip to/tmp/tmprZ4JfI...

  2013 05-28 T 06: 48:33Z esxupdate: Metadata.pyc: INFO: unknown file vendor - index.xml in the metadata file

  2013-05 - 28 T 06: 48:33Z esxupdate: downloader: DEBUG: download http://172.29.137.20:9084/VUM/repository/hostupdate/VMW/VMW-ESXi-5.1.0-metadata.zip to/tmp/tmpytjFZI...

  2013 05-28 T 06: 48:33Z esxupdate: Metadata.pyc: INFO: unknown file vendor - index.xml in the metadata file

  2013 05-28 T 06: 48:33Z esxupdate: BootBankInstaller.pyc: INFO: value not recognized 'title = loading VMware ESXi' in boot.cfg

  2013 05-28 T 06: 48:33Z esxupdate: BootBankInstaller.pyc: INFO: /altbootbank/boot.cfg: bootstate goes from 0 to 3

  2013 05-28 T 06: 48:33Z esxupdate: vmware.runcommand: INFO: RunCommand called with: args = ' [' / usr/sbin/vsish ', '-e', '-p', 'cat', ' / hardware/bios/dmiInfo "]', outfile = 'None', returnoutput = 'True', timeout ="0.0 ".

  2013 05-28 T 06: 48:33Z esxupdate: esxupdate: INFO: everything is done!

  2013 05-28 T 06: 48:33Z esxupdate: esxupdate: DEBUG: < < <

  Yes run command now below.

  dosfsck - a w /vmfs/devices/disks/naa.600508b1001cfd08a4849f06984fd8a2:5

• Problem with Maintenance Manager

  Hello

  I have a Lenovo T61 6457-E3G wth Windows XP. Windows is updated on the latest version available and therefore the lenovo software too.

  Weeks, the problem began:

  • When I shut down the computer the task of Lenovo: 'AWAYSCH' cannot be closed by windows. (So I have to do this on my shot of each stop down)
  • Also failed to start the Maintenance Manager (I pressed the button the Maintenance Manager, but the program does not start, without a description of the problem).

  Can some help me?

  Please refer to this URL: http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-70681

  Seems "AwaySch.exe" can't not T61s with Intel GM965 video. This could explain why the application will not launch.

• Strange problem with call manager and call before all

  Not sure whether this post about unity for or CCM. I will post on both. I have a main number customers dial in. When they call this number and they do not get a response, it passes to a call handler. This call handler has an option of entry of the appellant 3. If they hit option is three transfers to an IP phone on Call Manager who is assigned to the CFA for this cell phone to people. Everything works except when the call is sent to the PSTN it sounds for time and then disconnects. This number can be called directly from the system with no problem. The cause of the disconnection on debugging is the following: because I = 0x80FF - error of interconnection of networks; not specified. Please help if you can.

  I assume you are using version transfers here. You can give it a whirl with supervised transfers?

• Problem With nested Manager in DialogFieldManager

  I display successfully a PopupScreen with an icon, title, two fields of line and two buttons to the right places.  I do this by calling the constructor of PopupScreen with DialogFieldManager

  The problem is fixed height BasicEditField as I am trying to add.  There is space for the BasicEditField, but the BasicEditField is not.

  Here is the code I use.  Note: I left the ButtonField and FieldChangeListener code to stay brief.  I also tried to use customManager.add () instead of delegateFieldManager.addCustomField ()... or work:

       eflink = new EditField("", link);
          efname = new EditField("", "");
          befd = new BasicEditField("", "")
          {
              public int getPreferredHeight()
              {
                  return 60;
              }
          };
          dsm = dfm.getCustomManager();
          hfm = new HorizontalFieldManager(Manager.FIELD_HCENTER);
          tvfm = new VerticalFieldManager(Manager.VERTICAL_SCROLL)
          {
              protected void sublayout( int maxWidth, int maxHeight )
              {
                  int width = maxWidth;
                  int height = maxHeight;
                  width = dfm.getWidth();
                  height = dfm.getHeight() + befd.getPreferredHeight();
                  // super.sublayout( width, height);
                  setExtent( width, height);
              }
          };
          dfm.addCustomField(eflink);
          dfm.addCustomField(efname);
          //
          tvfm.add(befd);
          hfm.add(post);
          hfm.add(cancel);
          dfm.addCustomField(tvfm);
          dfm.addCustomField(hfm);
       }
  

  Can you see what I'm doing wrong?

  Solved!

  I took the code of this doc, deleted the reference EditField and adding a field to the constructor parameter.

  I then used the custom manager that results in place of the VerticalFieldManager in my previous code... using the fixed EditField as the field to the Manager constructor arg custom.