Problem with wall adapter to charge

Hi, I recently got a 8 GB Fuze... I thought that, instead of having to keep plugging the "rocket" to a computer you can connect to one of these USB wall adapter cards. Well I bought one and it is plugged. It worked the 1st day, but after that date, it has stopped working. Basically I Plug and it is said in writing... and then it says connected. The sign of lightning charge arises and drain you like 10% of my battery. I could changed a setting, but not entirely sure... and I left it on for like a day in the wall when I realized he had drained the battery.

Thank you


Tags: SanDisk Sansa

Similar Questions

  • Diagnostics Windows network, the error reads 'Problem with wireless adapter or access point' and fails to solve the problem.

    «Problem with access point or wireless adapter»

    Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, Maria

    HI Maria,

    ·         What operating system is installed on your computer?

    ·         You have installed the latest drivers for wireless network card?

    Follow the suggestions below for a possible solution:

    Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

     

    Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

    Method 2: See these articles for solve wireless problems:

    Why can't I connect to the Internet?

    http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

     

    How can I troubleshoot network card?

    http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

     

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Let us know if that helps.

  • Problems with Isatap adapter and Wirelesss network.

    The system is a sony viao and it's a windows vista too. It is impossible to connect to the wireless network. I checked Device Manager and noticed that the map isatap #4 and #5 do not work properly. How can I solve this problem?

    Separated from the:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/Microsoft-ISATAP-adapter-4-not-working/ef9c6ad9-623e-416F-8D9F-8e3d83d998ca?page=2#LastReply

    Please start your own Thread in these Forums.

    You are replying to a Thread 2009; It comes to 2014.

    ________________________________________

    Read this, you can:

    "On a Windows Vista-based computer or on a computer Windows Server 2008, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message"

    http://support.Microsoft.com/kb/932520/en-us

    Windows cannot load driver (Code 31), etc.

    RESOLUTION

    You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

    ____________________________________________

    You do not tell us the error your when you try to connect to the wireless network.

    We don't know if it's drivers or you have put in place correctly.

    Use the computer that you use to get here for access to the Sony site > downloads Section > key in your model number and operating system > find NETWORK card drivers > download and save > use copy to a flash drive and transfer and install them.u here to access the site on your computer or hardware manufacturer > downloads Section > key in your model number and operating system > finding drivers > download and save their > copy to a flash drive and transfer and install them.

    See you soon.

  • Unable to connect to Wi - Fi network - 'problem with wireless adapter or access point '.

    When I try to connect to the network Wi - Fi Home I get error like:- Windows cannot connect.

    When I click on solve problems I see error below :-'problem with wireless adapter or access point '.

    We reinstalled OS

    We rested the router

    We are able to connect to Wi - Fi in other laptops, notebook and mobile

    We have updated all the drivers of network also.

    Please help me solve the problem.

    Hi Niranjan,

    Thank you for your support. In fact, the problem is with the Router Configuration, because with any other router device, we are able to connect to Wi - Fi in the laptop.

    Thank you

  • Problem with the adapter on Xbox 360 to PC wireless controller

    Hello, I'm having a problem with my adapter on Xbox 360 to my PC wireless controller. When I try to connect the two lights will stop flashing as if they connected and no indication on the controller is showing that they are. Also the utility on the PC does not show that there is a connected device. I tried searching through my device manager and all solutions involving which does not work / I couldn't find how it works. If someone can quickly answer that would be great. -Brandon

    Hello

    I imagine the inconvenience that you are experiencing.

    I suggest you to contact Xbox support for assistance on this issue.

    Xbox support

    http://forums.Xbox.com/xbox_forums/xbox_support/default.aspx

    For any query related to Windows, feel free to post. We will be happy to help you.

  • Unable to connect to wireless internet with error message: "problem with wireless adapter or access point.

    Original title: I am trying to connect to my WiFi.

    I am trying to connect to my wifi but it keep saying there is a "problem with wireless adapter or access point. I tried the steps that he told me to do but still no help.

    Hello

    Thanks for posting your question in the community of Microsoft Windows. I understand that you are facing problems with your wireless internet connection. Correct me if I'm wrong.

    I imagine the inconvenience that you are experiencing. I will definitely help you with this.

    To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

    1 have you ever done any recent hardware or exchange of software on your computer before the show?

    2. What is the brand and model of the computer?

    Method 1:

    Follow the steps in the link below.

    Of connection problems in Windows wireless and wired network: http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Method 2:

    Follow the steps in the link below.

    Using the troubleshooter from network in Windows 7:

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Method 3:

    Follow the steps in the link below.

    How can I troubleshoot network card? :

    http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

    Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

  • I have a problem with the payment: (why charge me 44,99 EUR (cost 61.99 euros) then block system and I can't use the programs :(

    I have a problem with the payment why charge me 44,99 EUR (cost 61.99 euros) then block system and I can't use programs

    Please click Accounts & billing link here https://helpx.adobe.com/contact.html to have a conversation with our billing support team.

    Thank you

    Stéphane

  • I have a problem with the adapter plugged in, but do not load with pavilion dv6 3050 tx

    I bought a new pc hp laptop pavilion dv6 3050 tx a few days before, 1 day I m facing a problem on the charge. I put my laptop on the pricing but maximum time show connected does not support. kindly help me. Is - this prolem with battery or ac adapter or software problem. Please suggest me a solution.

    Hello

    The adapter block should be able to cope with weak variations in the power supply, so I doubt, however, there is a problem with your electrical network - only an electrician would be able to confirm it for you by testing the circuits of power supply to your property.

    Regarding overheating, there is a circuit in your notebook that interrupts the battery when it detects that it is at full capacity, so this shouldn't be a problem.

    Kind regards

    DP - K

  • Satellite P300-1 year - Touchpad problem with AC adapter / CC

    I have a laptop Satellite P300-1 year and from the beginning (two weeks)
    I have a touchpad problem: it will not immediately responsive and the pointer shakes when pressing the key. Very often, it freezes for only one or two seconds.

    It's VERY annoying. A USB mouse works perfectly.
    I tried to reinstall the drivers of the ALPS, tried Synaptics ones, just try Windows Vista drivers: no way.

    Now, I found the reason: this question is present only when the laptop is powered by the AC adapter / CC.
    With the battery, the touchpad is perfect.

    I contacted Toshiba Service and thay said that they do not change the AC adapter if I don't mean before a full system restore!
    Is it not more simple just try with a new adapter and then only, if the problem persists, try more drastic procedures?

    Anyone had this same problem?

    > I contacted Toshiba Service and thay said that they do not change the AC adapter if I don't mean before a full system restore! Is it not more simple just try with a new adapter and then only, if the problem persists, try more drastic procedures?

    The point is that your laptop should be always verified using the Toshiba factory setting.
    Why? Because the ASP wants to make sure that this issue is not related to a software problem (compatibility problems with applications 3rd part). Software problems are not covered by the warranty.

    In addition the ASP will always recover the laptop before the verification of the pieces of equipment to malfunction. Therefore, you should always back up your data from the HARD disk until you send the laptop to check.

    I recommend you to reinstall the operating system using the Toshiba recover disc and then check if the problem appears.
    If yes you can contact ASP and could provide all the necessary details for only one technician.

    Good bye

  • Problem with WiFi adapter (RTL8187b) on the Satellite L350-146

    Hello.

    Problem with WiFi (RTL8187b) on the Toshiba Satellite L350-146 adapter:

    Exchange of packets of 192.168.0.177 with 32 bytes of data:

    Reply from 192.168.0.177: bytes = 32 time = 3ms TTL = 128
    Reply from 192.168.0.177: bytes = 32 time = 4 ms TTL = 128
    Reply from 192.168.0.177: bytes = 32 time = 6ms TTL = 128
    Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
    Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
    Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
    Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
    Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128
    Reply from 192.168.0.177: bytes = 32 time = 874ms TTL = 128
    Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
    Reply from 192.168.0.177: bytes = 32 time = 364ms TTL = 128
    Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
    Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
    Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
    Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128
    Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
    Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128
    Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
    Reply from 192.168.0.177: bytes = 32 time = 3ms TTL = 128
    Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128
    Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
    Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128

    Ping statistics for 192.168.0.177:
    Packets: sent = 50, received = 50, lost = 0 (0% loss)
    Estimated duration of admission, transfer to ms:
    1msek = Minimum, Maximum = 874 ms, average = 34 ms

    Win Vista HP, drivers last.
    This problem with different access points.

    Sorry for bad English may

    Need to check if theres no interferense in your plase, check also if the WiFi adapter is ok!... you can do this reinstalling the driver and check if it works if not you have to go with an ASP in your area to check the Wi Fi card...

  • [Z510] Problems with the battery not charging

    I have ideapad z510 for almost a year. and now my unit still shows that it is at 0% battery. and she indicates that she battery level does not increase. and for this reason I could not use my unit when it is not plugged. What should I do about it?

    Comment to Moderator: New thread is created. The topic is edited to include the model.

    In response to customer relationships of unexpected problems with the performance of the batteries portable Z500 and Z510, Lenovo made an update of the firmware of battery available via download on the Lenovo Forums.

    This battery firmware is intended to solve unexpected load following symptoms when a Z500 and Z510 mobile phone is turned on:

    • Battery is dead

    • Battery is not detected

    • Battery is detected and charged 100%, but when the power is removed, the laptop turns off immediately

    • When the battery is fully charged and the AC power is removed, the battery level falls considerably less than 10 minutes

    Please note a procedure step by step for the upgrade of the firmware is included in the .zip file, found in the file "ReadMe".

    The battery firmware update can be downloaded here: https://download.lenovo.com/lenovo/content/sm/z500_z510_battery_firmware_update.zip

    Thank you

  • Unable to connect via the wireless router "problem with wireless adapter or access point" _

    Hello

    I recently replaced my old Toshiba laptop with a new model of Toshiba Satellite L500/033HNX, it installed Windows 7.

    The problem is that I can't connect to my wireless network. I am currently connected via Ethernet cable to my Linksys router.

    I had help from my internet service provider, the installation correctly the problem not because of the connection.

    I had a Linksys online support, the router is a wireless, model - WAG54G ADSL gateway, is not the problem of all the correct settings and other devices can connect via my wireless network. I ran Dr. connectivity several times and it is always impossible to connect, "problem with the wireless adapter or access point.

    OK, you're my next hope to solve the problem can you HELP Please!

    Hi, JoelbX
    I want to thank very you much for your support and effort do to help me solve this problem, but we receive have been, and I don't want to waste any more of your valuable time, so I am the son of closing and deleting of Tring in Microsoft Answers.
    All the best
    Tring

  • Access WiFi Limited, problem with Wifi adapter

    Original title: wifi access

    my laptop recently having limited wifi access issue. I tried troubleshooting, but it did not help. It comes up with a window saying there is a problem with my wireless card. I checked the wifi card in the Device Manager and it says that the equipment did not work properly. then I tried uninstalled and reinstalled, but the problem is not fixed. my card is atheros ar9485 qualcomm (im using os win 8). I searched online and some people having problems of this ar9485 as well. then I updated the NIF of the driver file, but the problem still exists. im going to be crazy now. could you please help me out of it? much appreciated!

    Hello

    What is the brand and model of the laptop?

    There could be a problem with the driver for the wireless network connection card.

    Kindly, follow these steps and check if that helps.
    Method 1:

    If you get an error 'problem with my wifi adapter', please uninstall and reinstall the wireless card driver. Check with your computer manufacturer or the manufacturer of your wireless (Atheros) adapter and make sure you have the latest driver available for the card.

    Follow these steps:
    First, download the latest driver for network card wireless from the manufacturer's Web site.
    a. to uninstall the card, then press X and Windows on the screen. Click on Device Manager.

    b. locate network card and expand the driver icon.

    c. right-click on the icon of the Atheros wireless driver and click Uninstall.

    Follow the instructions on the screen to uninstall the driver.

    d. open the folder that contains the installation file of the latest driver that you downloaded.

    e. double-click the Setup file and follow the instructions on the screen to install the NIC driver

    You can try some troubleshooting section:
    How can I troubleshoot network card?

    http://Windows.Microsoft.com/en-us/Windows/fix-network-adapter-problems#1TC=Windows-8

    Method 2:
    You can also reset TCP/IP manually.

    Follow these steps:

    a. press the Windows key (enter the splash screen), type cmd on the right click of the screen prompt, select run as administrator.

    b. at the command prompt, copy and paste (or type) that follows the command, and then press ENTER:
    netsh int ip reset c:\resetlog.txt

    c. Note: If you do not specify a path of the directory for the log file, use the following command:
    netsh int ip reset resetlog.txt

    d. restart the laptop.

    Let us know if it helps. If you have any other questions, we will be happy to help you.

  • Problems with SAP adapter

    Hi all

    We try to call some SAP BAPI of BPEL and hit the below errors

    Mistake1:
    ----------
    For 1st call BAPI of BPEL console fails with:

    The adapter framework has been impossible to establish an outgoing connection of JCA due to the following problem: javax.resource.spi.EISSystemException: IWAFManagedConnectionFactory:Exception javax.resource.ResourceException: Configuration "SAPHR" not available for the "SAP".
    ; nested exception is:
    ORABPEL-12511

    Checked the directory AS_HOME\adapters\application\config\XXXXX\log to the JCA connects and the error is as below:

    Thread [AJPRequestHandler-HTTPThreadGroup-55, 5, HTTPThreadGroup] [error] [IWAF JCA] error in the creation of IWAFManagedConnection:
    java.lang.IllegalArgumentException: Configuration "SAPHR" not available for the "SAP".
    at com.iwaysoftware.af.container.AdapterManager.checkConfig(AdapterManager.java:450)
    at com.iwaysoftware.af.container.AdapterManager.getActivatedAdapter(AdapterManager.java:238)
    at com.iwaysoftware.af.container.IWAFContainer.getActivatedAdapter(IWAFContainer.java:491)
    ...
    ...

    Error2:
    ---------
    For another BAPI of BPEL console call fails with:

    Thread [AJPRequestHandler-HTTPThreadGroup-55, 5, HTTPThreadGroup] [error] [Decloitre JCA MySAP] * error in the analysis of the input document.
    Oracle.Xml.Parser.v2.XMLParseException: start of the element root waited.
    at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:320)
    at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:341)
    at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)
    at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:205)
    at com.iwaysoftware.idom.XmlDocument.parse(XmlDocument.java:120)
    at com.iwaysoftware.idom.XmlDocument.setRootXML(XmlDocument.java:77)
    at com.ibi.afjca.cci.IWAFInteraction.execProcess(IWAFInteraction.java:195)
    ..
    ..

    However, we are able to obtain satisfactory response from the JCA Test servlet with the same request payload. All entries on what may be causing the errors above invocation of BPEL console.

    Thank you
    Laros

    Yes, who can help. Or you can change the wsdl file which fail to refer to the correct configuration (we don't have to reconfigure the configuration "SAPHR")

    Thank you
    Maury

  • Still problems with the adapter Bluetooth Toshiba Windows 7

    Hey there, it's me again.

    I am referring to my 'Problem Bluetooth on Windows 7' subject:

    I thought after the solution of bluecat that my problem has been resolved. But it isn't really.

    After you install the Windows fix, it worked just a short time. But now the problem is the same.

    When I remove the Toshiba Bluetooth Stack and try to work with Manager Bluetooth of Windows, I see that the Bluetooth icon is to come and one to go on the taskbar. In Device Manager, I said Windows, that it is not closed the device to save power. But I think that the device is on and walk and stop...

    I really absolutely have no idea what is the problem, but I get terribly angry.

    Details:
    Windows 7
    Dell Wireless Bluetooth internal adapter 350 (but it is manufactured by Toshiba)
    Experienced pilots: Vista Pack of profile of the Dell homepage (no battery installed, driver only) / Toshiba Bluetooth Stack (the latest version)

    This is the old thread:

    Hi all

    Just as I installed Windows 7, my keyboard and Bluetooth mouse do not work very well.

    I use the Dell Wireless 350 Bluetooth internal adapter, Toshiba Bluetooth Stack 8.00.02 and the keyboard and mouse Logitech MX1000.

    To connect the devices on my computer, I first have to disconnect the Bluetooth adapter by pressing Fn + F2 on my Dell i9400, after re-login I can search and connect devices correctly. They work fine as long as the laptop is running.

    After restarting the laptop, devices no longer work. They are still in the known, but not connected Bluetooth stack. That's why I have to unplug the adapter Bluetooth, another time and reconnect in order to connect the two devices.

    I first thought, it's a Windows problem. I thought that Windows is able to ask the adapter to save power. But when I go to Device Manager, there is no box for this option, as known from other devices (Te USB Ports). If this isn't the problem. I think the problem is something else, maybe performed by the Bluetooth stack.

    Windows XP it worked perfectly. I used the same hardware and also the battery Bluetooth Toshiba (uploaded on the homepage of Dell).

    Someone at - it ideas?

    Thank you!

    Daevu

    Hey there

    Yesterday I did Format C: and installed Windows 7 news.

    I do not have a bluetooth driver for my Dell Wireless 350 Bluetooth adapt (made by Toshiba).

    And now: the mouse and the keyboard work. I even do not see anywhere in my system, but they work.

    There is no bluetooth adapter in my device manager and I had do not connect the keyboard and mouse with my computer. She simply do nothing.

    I do not understand this...

    What is a backup connection?

    What I tried:
    -> Installation more recent Bluetooth Stack from Toshiba. Problem in the above message. I also installed the MS Hotfix. The same problem.

    -> Installed "Vista profile Pack" on the home page of Dell, recommended for my laptop and Windows Vista. There is no battery installed. So I had to connect the mouse and keyboard via the Windows Bluetooth Manager. But the adapter was performed on and off windows, the icon in the task bar came and went and came and went. Connection is good, 1 minute then a few seconds. Not possible to work with the mouse.

    And now, without having to install a driver, it works. Am I stupid?

    Daevu

Maybe you are looking for