Problem with the adapter on Xbox 360 to PC wireless controller

Similar Questions

• Problem with the certificate on Xbox 360 system Internet Explorer error

  Original title: that is this "problem with certificates?

  I have been using Bing on my Xbox 360 Internet Explorer system for years with little trouble. Today, I cleaned the history since he was a little slow again, but now I am unable to connect to Bing (or really any Microsoft site) through the Xbox 360 Internet Explorer. Whenever I try, I keep coming to a screen message saying that there is a problem with the certificate on the site. I am able to log in and connect to these same sites fine on my computer, but I don't have access to my computer all the time, so it was nice to be able to use Bing on my Xbox 360, but now with this error I can't. What is the cause of this, and what can be done to remedy this.

  It seems that a recent patch for the application of EI on the Xbox 360 has solved this problem now.

• WIN Pro 8, xbox 360, z axis wireless controller does not

  WIN Pro 8, Microsoft Xbox 360 wireless controller, z axis does not.

  Axis Z work in the calibration screen, but not in the test screen or in the games must be a driver problem, advice?

  Have deleted the driver to allow windows to reinstall the drivers.

  Installing the windows driver software 7 for the controller, still the z axis only work in the calibration screen.

  I thought that I had the same problem, but see the knowledge base article: http://support.microsoft.com/kb/2757006

  Apparently, the problem is only with the test itself dialog box. I also jumped to the conclusion that it must be a driver problem and expects the controller does not work properly in games.

  However, the controller DOESN'T seem to work properly in games.

  (Mine is actually a Logitech F710, but it uses Xinput anyway).

  I hope that your Z axis controller also works outside of the test application, and the information above helps dispel the confusion around this issue.

  There is no problem with the drivers or controller, everything works (read below for the explanation and solution)

  I had the same problem, with the z axis (Left Trigger (LT) and right trigger (RT)) with a 360 wireless controller by using the adapter on Windows 8 Pro 64-bit wireless controller.

  He would not show the entrances to trigger (z axis) on the calibration screen. Looked online and came across this thread in hopes of finding new update of drivers, or a solution.

  After reading the post I quoted above, I decided to see if the z axis works in the game, and he does. I tried Street Fighter X Tekken, went to training mode and you can view entries button on the screen, and pressing the RT and LT trigger buttons, they are part of the game and my character not the corresponding move associated with the key as well as to show the button based directly on the screen.

  I went then the game controller settings in windows 8 and again once the game controller dialog box does not show the LT and RT (z axis) entered.

  Solution: the controller works fine, and not showing is not the z axis is only a cosmetic problem with the Controller dialog box. So just ignore the controller, the z axis dialog box still works in games.

• Still problems with the adapter Bluetooth Toshiba Windows 7

  Hey there, it's me again.

  I am referring to my 'Problem Bluetooth on Windows 7' subject:

  I thought after the solution of bluecat that my problem has been resolved. But it isn't really.

  After you install the Windows fix, it worked just a short time. But now the problem is the same.

  When I remove the Toshiba Bluetooth Stack and try to work with Manager Bluetooth of Windows, I see that the Bluetooth icon is to come and one to go on the taskbar. In Device Manager, I said Windows, that it is not closed the device to save power. But I think that the device is on and walk and stop...

  I really absolutely have no idea what is the problem, but I get terribly angry.

  Details:
  Windows 7
  Dell Wireless Bluetooth internal adapter 350 (but it is manufactured by Toshiba)
  Experienced pilots: Vista Pack of profile of the Dell homepage (no battery installed, driver only) / Toshiba Bluetooth Stack (the latest version)

  This is the old thread:

  Hi all

  Just as I installed Windows 7, my keyboard and Bluetooth mouse do not work very well.

  I use the Dell Wireless 350 Bluetooth internal adapter, Toshiba Bluetooth Stack 8.00.02 and the keyboard and mouse Logitech MX1000.

  To connect the devices on my computer, I first have to disconnect the Bluetooth adapter by pressing Fn + F2 on my Dell i9400, after re-login I can search and connect devices correctly. They work fine as long as the laptop is running.

  After restarting the laptop, devices no longer work. They are still in the known, but not connected Bluetooth stack. That's why I have to unplug the adapter Bluetooth, another time and reconnect in order to connect the two devices.

  I first thought, it's a Windows problem. I thought that Windows is able to ask the adapter to save power. But when I go to Device Manager, there is no box for this option, as known from other devices (Te USB Ports). If this isn't the problem. I think the problem is something else, maybe performed by the Bluetooth stack.

  Windows XP it worked perfectly. I used the same hardware and also the battery Bluetooth Toshiba (uploaded on the homepage of Dell).

  Someone at - it ideas?

  Thank you!

  Daevu

  Hey there

  Yesterday I did Format C: and installed Windows 7 news.

  I do not have a bluetooth driver for my Dell Wireless 350 Bluetooth adapt (made by Toshiba).

  And now: the mouse and the keyboard work. I even do not see anywhere in my system, but they work.

  There is no bluetooth adapter in my device manager and I had do not connect the keyboard and mouse with my computer. She simply do nothing.

  I do not understand this...

  What is a backup connection?

  What I tried:
  -> Installation more recent Bluetooth Stack from Toshiba. Problem in the above message. I also installed the MS Hotfix. The same problem.

  -> Installed "Vista profile Pack" on the home page of Dell, recommended for my laptop and Windows Vista. There is no battery installed. So I had to connect the mouse and keyboard via the Windows Bluetooth Manager. But the adapter was performed on and off windows, the icon in the task bar came and went and came and went. Connection is good, 1 minute then a few seconds. Not possible to work with the mouse.

  And now, without having to install a driver, it works. Am I stupid?

  Daevu

• I have a problem with the adapter plugged in, but do not load with pavilion dv6 3050 tx

  I bought a new pc hp laptop pavilion dv6 3050 tx a few days before, 1 day I m facing a problem on the charge. I put my laptop on the pricing but maximum time show connected does not support. kindly help me. Is - this prolem with battery or ac adapter or software problem. Please suggest me a solution.

  Hello

  The adapter block should be able to cope with weak variations in the power supply, so I doubt, however, there is a problem with your electrical network - only an electrician would be able to confirm it for you by testing the circuits of power supply to your property.

  Regarding overheating, there is a circuit in your notebook that interrupts the battery when it detects that it is at full capacity, so this shouldn't be a problem.

  Kind regards

  DP - K

• Problem with the adapter Bluetooth Logitech speakers on Windows 8

  I use Windows 8 Pro, but I had the same problem on the consumer Preview (some things are different now though)

  I use a Dell Inspiron N5010 laptop with a Dell Bluetooth 365 module.

  When I first install the Adapter Bluetooth Logitech speaker it works fine (there is no driver for it but windows installs the driver of basic ad2p). The problem I have is that after the computer sleeps, stops, or restarts the unit is unplugged (as expected) and I can't reconnect (only to remove the device and install again).

  In Windows 8 Preview of consumption when the device is plugged in, I could separate and connect it to the sound settings, but it would vanish from the sound after a sleep settings, reboot or shutdown.

  I could easily connect or disconnect the device by double-clicking its icon in devices and printers in Windows 7. If I do the same thing in Windows 8, an error saying "BTWuiext has stopped working".

  So basically after every sleep, closing or restarting I remove and reinstall the device...

  I also tried troubleshooting of devices and printers, and I checked that Bluetooth Service is running.

  Any help is greatly appreciated! Thank you.

  Hi radufly,

  Thank you for writing to Microsoft Communities. From your problem description, I understand that, after every restart, sleep or a stop, you need to reinstall the drivers for your device. Please correct me if I misunderstood.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  radufly, it seems that the device is not compatible with the Windows 8 environment. I recommend you to contact Logitech support http://www.logitech.com/en-us/support/support-contactus and check with them if they came with drivers for Windows 8.

• Problem with the HP on a Pavilion DV6-6013tu wireless Assistant

  I have a Pavilion DV6-6013tu using windows 7-64 bit operating system.

  For some unknown reason, this morning, I started to get the error message 'Wireless information not available' and also the message that the application will now be down.

  When I try using the control panel to open the HP Wireless Assistant, he refuses to open and after a long period comes up with the error message above as well.

  The blue light is on the f12 key and I can connect to the internet via my wireless modem router.

  I can also print via my wireless printer.

  Can anyone help?

  HP support have forced me to down load an updated version of HP Support assistant, who made no difference what so ever.

  I can see the point HP wireless assistant in programs and features (via Control Panel), but until I can get a new update so that it won't move forward to remove it.

  HP support say jut ignore the error message and continue to use the computer!

  The laptop is not another year and I expect them the advice they gave me constructive assistance.

  Anyone out there can teach an old dog new tricks, short easy to understand steps even if, as I am not tech savvy at this stage in my life.

  Thank you.

  Part of HP software update would still be a wise thing to do.

• problem with the adaptation of the updated image on the page that I really need help with

  Work on a Web site now

  www.papersmonthly.com

  When you view it, I just want everything to scale to the size of the browser, but for some reason, only the pictures are scaling and by making my site look really weird.

  any help would be greatly appreciated.

  You simply design your page way too big and things cropping with overflow are normal behavior. Except if you put everything in full page or manualyl scale widgets change the respective formatting will not change behaviors.

  Mylenium

• I have a mac book pro 2009 model, now when I try to load it, there is no green light on the adapter and the laptop does not charge. Not sure if there is a problem with the card or the battery or the laptop. Kindly help

  I have a Mac book pro 2009 model, when I try to load it it not there no green light on the adapter and he is in charge. Not sure if there is a problem with the adapter or the battery or the laptop. Kindly help... Thank you

  Have you tried:

  Portable Apple computers: Troubleshooting MagSafe adapters - Apple Support

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Problems with Isatap adapter and Wirelesss network.

  The system is a sony viao and it's a windows vista too. It is impossible to connect to the wireless network. I checked Device Manager and noticed that the map isatap #4 and #5 do not work properly. How can I solve this problem?

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/Microsoft-ISATAP-adapter-4-not-working/ef9c6ad9-623e-416F-8D9F-8e3d83d998ca?page=2#LastReply

  Please start your own Thread in these Forums.

  You are replying to a Thread 2009; It comes to 2014.

  ________________________________________

  Read this, you can:

  "On a Windows Vista-based computer or on a computer Windows Server 2008, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message"

  http://support.Microsoft.com/kb/932520/en-us

  Windows cannot load driver (Code 31), etc.

  RESOLUTION

  You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

  ____________________________________________

  You do not tell us the error your when you try to connect to the wireless network.

  We don't know if it's drivers or you have put in place correctly.

  Use the computer that you use to get here for access to the Sony site > downloads Section > key in your model number and operating system > find NETWORK card drivers > download and save > use copy to a flash drive and transfer and install them.u here to access the site on your computer or hardware manufacturer > downloads Section > key in your model number and operating system > finding drivers > download and save their > copy to a flash drive and transfer and install them.

  See you soon.

• Satellite A200 - problems with the AC adapter / CC

  Hello

  The problem concerns a Satellite A200 (PSAF6A-02H01N).

  Recently, there was problems with the laptop, taking several attempts to boot to Vista, it would lock up while loading or just hang and freeze just after loading Vista.
  But once it was up and the laptop running would be happy working for hours with the AC adapter is plugged in.

  The problem got worse now and the laptop will not load Vista end without crashing.
  We have now reduced the computer down to have only a problem when the power adapter is connected.
  The laptop battery will charge normally with the AC adapter is plugged in and the laptop on standby or off.

  The problem persists with the AC adapter is plugged in and the battery removed.
  The laptop will start and run perfectly with battery and no power adapter plugged. Once the AC adapter is plugged in the laptop indicates that the battery is charging and then after a few seconds it crash or freeze and the only escape is a full stop.
  The laptop will not work under the battery power for 30 minutes max.
  I checked the output voltage of the AC adapter and this seems to be a consistent 19.4 Volts.

  Is this only a problem of AC adapter or the problem with the laptop?

  Thanks in advance...

  The Canada Gazette

  I lifted the previous discussions on this problem and found one that was very similar, but unfortunately the user decided not to find the problem of the road, save money and buy a new laptop instead! Hmm. !! .. seems to me like this might be a prob. material. Maybe a new motherboard?... anyone have an idea of what are the costs for that perhaps? .. an ASP or decent technician backstreet?...

• ProBook 450 G0: The problem with the ralink ralink RT3290 адаптер чипсет с Проблема RT3290 adapter

  The connection on the router TP - LINK Archer C2 problem. On the previous version of the driver for wi - fi doesn't appear, although it is (checked on the phone and tablet) but wifi on all other routers sees it. Installed version of the pilot on June 18, 2015 5.0.57.0. Screenshots of Wi - fi. But another problem appears: could not connect to Wi - Fi. Gives this error 'Windows cannot connect to the network' or 'connect without access to the Internet. Using manual reconnection to the network or restart the laptop. We're spontaneous deactivation of a Wi - Fi connection, even if the Wi - Fi network works correctly (currently, a Tablet and a work of smart phones over wi - fi). And poor quality. Even being near the place of distribution, there are problems with the wireless network. Another question is why the laptop is not catch wifi 5 GHz (on configured router)?

  Проблема соединения по роутером с Archer C2 TP-LINK wireless. На предыдущей версии драйвера соединение по wi - fi не видит, хотя оно есть (проверял на смартфонах и планшете), но wi - fi от других роутеров видит.Установил itself версии 5.0.57.0 от 18 июн 2015. A WiFi ловит. Но возникает другая проблема: не удается подключиться Wi - Fi Интернет к. Дает такую ошибку "Windows не подключиться сети к удается" или "Подключение без доступа к интернету". ПОМОГАЕТ ТОЛЬКО РУЧНОЕ ПЕРЕПОДКЛЮЧЕНИЕ К СЕТИ ИЛИ ПЕРЕЗАГРУЗКИ ЛАПТОПА. Есть спонтанное отключение сети Wi - Fi, хотя в Wi - Fi сеть работает нормально (в это планшет и смартфоны работают от wi - fi время). И КАЧЕСТВО СВЯЗИ ПЛОХОЕ. БУДУЧИ ДАЖЕ РЯДОМ ПО МЕСТУ РАСПРЕДЕЛЕНИЯ СУЩЕСТВУЮТ ПРОБЛЕМЫ n БЕСПРОВОДНОЙ СЕТЬЮ. Еще вопрос почему лаптоп не ловит wi - fi на частоте 5 ггц (на все настроенно роутере)?

  You can install MediaTek (Ralink) 802.11 b/g/n wireless LAN adapt driver

  Rev.D version 5.0.56.0 (June 10, 2015)

  -Fixes an issue where the system does not correctly connect to a wireless access point and the wireless network connection is limited.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_149767_1

  I think that RT3290 is a 2.4 GHz wireless module

  You can turn off Bluetooth in the BIOS for wireless performance batteries.

• I have a problem with the #2 Microsoft tun miniport adapter. It cannot start. FileVersion pilot because it is 6.0.6001.18000

  Hello! I have a problem with the #2 Microsoft tun miniport adapter. It cannot start. FileVersion pilot because it is 6.0.6001.18000 (longhorn_rtm 080118-1840). I have a problem because my internet is not working because of the adapter, so I'm not able to use your forum solutions requesting that my internet is working. So, can you give me some advice on how to deal with this problem.

  Hello

  Refer to the answer posted by Sabrina Shen in the following link to resolve the problem:

  Map #2 Microsoft Tun Miniport

  See also:

  The problems of Internet connection

  Network connection problems

  Why I can't online?

  Windows wireless and wired network connection problems

• There is a problem with the Microsoft Teredo Tunneling adapter driver. The driver must be reinstalled.

  I notice that I need to solve problems for my computer.  The message said: there is a problem with the Microsoft Teredo Tunneling adapter driver. The driver must be installed.  One of the options is to reinstall the driver.  I tried, but it did not.  What is this adapter, and how should I do if the error message goes away?

  There is a problem with the Microsoft Teredo Tunneling adapter driver. The driver must be reinstalled.

  The device information Name: Microsoft Teredo Tunneling adapter ID: ROOT\ * TEREDO\0000 Error code: 10 Reinstall the device driver Completed There is a problem with the Microsoft Teredo Tunneling adapter driver. Reinstall the driver may resolve this issue.

  Problem with the PnP devices Detected

  There are problems with some devices PnP. Windows will take additional steps to continue troubleshooting these devices.

  It is a known problem if you have Zone alarm installed.  If you have installed remove it at least to check

  To disable Teredo tunneling 6to4 interface open an elevated command prompt and type

  netsh interface set terredo disabled state.
  To re - install

  Click on start. Type Device Manager in the start search box, and then open it. Click the Action tab on top and click Add legacy hardware then click next and next again, he will then scan and find nothing then click on the screen after that. Wait a minute and you will see a list of devices appear, scroll and select network adapters and click Next, then in the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling adapter, and then click Next and it will install it. To check simply do as it is set to show hidden devices right click on the Device Manager right click view, then show hidden devices.

• There is a problem with the driver for a wireless adapter that if it is not compatible or not supported

  My grandmother came to visit me in Belgium and brought her laptop with her. It is Windows 7 and I bought in Ukraine. Thus, she cannot use wireless internet at my place. Troubleshooting scan says there is a problem with the driver for a wireless adapter that is it is not compatible or not supported, something like that. All sound systems are in Russian is not easy for me to explain it. Is it possible to fix this problem or she can't use her laptop to go on the net at all? Thank you!

  If it's a driver fault, can go you on another pc to work to manufacturers support web site for the 'Ukraine' pc and see if the wireless drivers are available there. If they are, download the latest compatible drivers for your pc and transfer them to it by a stick of memory from SD or USB and then install them.

  This may be due to a setting of your network security wireless, for example, that is your network is set to WPA2 but pc does not support. Check configurations for compatibility with your router wireless sound.

  See if anything here help - http://windows.microsoft.com/en-us/windows/setting-wireless-network#1TC=windows-7

  At worst, is it not possible to connect via a cable to your router, esp, if is only a visit to sound.