Problem with Windows startup with Toshiba HDD external

Similar Questions

• Problems with Toshiba HDD Recovery

  Hello

  A few days ago, I bought a new Toshiba Satellite notebook, everything was going well until I started to delete or disable the programs that have been added automatically with Windows 7 Home Premium 64 bit on the HARD drive,
  because for me, most of them is really unnecessary and everytime when I checked the Task Manager it had before any process of more than 80.
  If everything seemed great until I rebooted the computer, after that there wasn't one more chance to log in windows, I tried several times, but without effect, even I tried via safe mode.
  It seemed like they were reduced.
  So I decided I will upload I want to install the new Windows 7 different version on the HARD drive, without thinking that he might restart former.
  and the problem started here because the hardware does not recognize the new version of Windows, I have all the drivers, I tried to download and add them, but did not work.
  Even Device Manager does not properly because it does not show same me I have the graphics card ATI, network card...

  I know I reacted stupidly, but is there a possibility that I can reboot, reinstall the old primary windows again, because I didn't erase them or I na not format the HDD but I installed the new version on
  One older so that they are still in place on the HARD drive, but under another brand windows.old.
  I also have on the other HARD drive recovery partition, or it's just better to him distribute service where they can solve the problem.
  If you have any tips or advice please tell me!

  Thanks for your response

  AL

  Oh AL what are you doing man. I mean why do you all this?
  The first step, you must do it with the new device is to check the s manuals and pick up some info about your new product.

  In this manual is clearly described that original recovery image is saved on the HARD drive and very important, is to create recovery DVD that you can use in the case if the HDD recovery procedure will not longer work.

  So what you have now?
  -screwed to the top of operating system
  -Nothing in the hand who can help you with recovery of OS install

  Only thing you can try now is to start HARD drive recovery in the hope that everything will work OK.
  Here the instructions how to do this > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  If this does not work, you have a big problem.
  Anyway send comments and let's see what you can do as the next step.

• Problems with Toshiba Flash cards

  I have problems with toshiba flash Cards on my desk and stay there.  It says flash cards, not reponding, but I can't get rid of it.  This utility is really necessary to make my computer work correctly?  How can I get it out of my office?

  Hi Bklawinsky,

  ·         Did you do changes on the computer before the show?

  ·         The other device USB (Universal Serial Bus) have recognized?

  Follow the suggestions below for a possible solution:

  Method 1: You will need to check the updated version of the utility of flash cards on the site of Toshiba, if found, install and check if the problem persists.

  Method 2: If you can't find any update of the utility so I would suggest that you uninstall using programs and features, reinstall it later using the Toshiba website, according to your model number of the computer to download the utility below.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

   

  Toshiba downloads

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Let us know if that helps.

• Problem with Toshiba Power Saver Tecra S1

  Hello

  I have problem with Toshiba Power Saver (GST).
  I installed SP2 on my WinXP Pro, and after this operation, all works well. After a few days GST on icon disappear from the task bar. When I open the Console from Toshiba, then GST I can see only incomlete standard dialog box. There is no configuration icons, but initially were, and I set all the settings. Now, there are 4 black boxes (2 small as a small icon) and 2 large as icon bigest at the bottom and a large black on the right.
  I try to reinstal GST, but it had no effect.

  Can someone help me

  Alex

  Hello Alex

  I have never seen anything like it. There is obviously some problems that doesn t allow the graphic illustration of the ATP. The first step is always reinstalling the software. I don't know what you need to do exactly. In my opinion, you should try to remove the GST and SP2. Install SP2 again and after this GST.

  If there is not the worst success solutions are preinstall the device using the recovery CD.

• I have a problem with my HDD to fill without no reason.

  I have a problem with my HDD to fill without no reason.  I should have about 340 GB free and it reads now only 18 GB free.  Can I have found the culprit (Revo Uninstaller Pro) because he stop to fill in after I removed it.  I can't find where all the "whatever" went.  I don't see anything funny in the registry and cannot find the strange files on the C drive under computer.  I wouldn't mess with the registry too but I as I am limited in my understanding of what's there.  I scanned the hard drive with my Avast Anti Virus and the Microsoft Emergency scan engine and found nothing.  If someone could give me an idea of what happened and how to get my rear disc space, I would be grateful.

  Avoid Revo Uninstaller Pro software type (including the registry cleaners "" and system optimizer).
  Programs and features does the job quite well.
  -There is no advantage to playing in the registry.

  -First run Disk Cleanup defragment the HARD disk in order to have a 'clean' basis of work form.

  -Treesize will show exactly what is there and how much of it.
  http://www.Jam-software.com/treesize_free/

  -Check how much space is used by System Restore.
  Restoration of the system- How do I

  -Indexing research is supposed to implement a very large file as well. You can limit where it indexes
  or turn it off completely in - Control Panel > Indexing Options
  -Check there is no software constantly writing/rewriting something. These activities have
  view in Task Manager-process.

  -Have another look through programs and features and see if there is has than nothing installed, you
  do not use or need and to uninstall, but software doesn't generally use a lot of space.

  .

• SQL loader, problem with the POSITION & EXTERNAL

  Hi gurus of the Oracle.

  I have problem with position and external.

  I have the data file with the data of 1 million records

  data delimiter is to and eventually closed by «»

  some lines are not loaded due to errors of data, i.e. data contains some «»

  now, we decided to use the position & external. am unable to write the control file.

  any help would be much appreciated

  The table name is person_memo, 4 columns

  ID_PERSON				VARCHAR2 (9 bytes)
  TX_MEMO				VARCHAR2 (1000 bytes)
  ID_USER				VARCHAR2 (20 bytes)
  TM_STAMP				TIMESTAMP (6)

  my control file is

  DOWNLOAD THE DATA

  ADD THE PERSON_MEMO TABLE

  FIELDS TERMINATED BY ' |'

  SURROUNDED OF POSSIBLY "" "

  TRAILING NULLCOLS

  (

  ID_PERSON POSITION (1) "CUT (: ID_PERSON).

  , TX_MEMO POSITION (10) TANK (1000) "CUT (: TX_MEMO).

  , POSITION (1012) ID_USER "TRIM (: ID_USER).

  , TM_STAMP POSITION (1031) EXTERNAL (26) ' DECODE (: TM_STAMP, NULL, NULL, TO_TIMESTAMP (: TM_STAMP, ' YYYY-MM-DD - HH24.MI.)). SS. "(FF')).

  )

  specimen of data file

  "04725813" | "aka"Little Will"" "|" " 095TDEAN «|» 2013-02-21 - 11.13.44.632000

  "05599076" | "" FIRST NAME - ADDED A 'T' AS ON THE REG MAP | ' 016DDEAL ' |. ' 2014-04-11 - 10.06.35.598000

  Thanks and greetings

  REDA

  In your control file, EXTERNAL (26) must be INTEGER EXTERNAL (26).

  Unfortunately, this forum destroyed the spacing, so I can't say whether or not your data are positionnelles.  If it is positional, you can then use positions, but you need start and end positions.  The positions that you posted have nothing to do with the data you've posted.  If you use positions, you can eliminate the delimiters and the beginning and the end of citations using these positions.

  If your data are not positionnelles and you have quotes in your data in quotes, but you don't have the pipe delimiters in your data, then you can only use the delimiters and trim the quotes start and final data.

  I have demonstrated the two methods below, using test1.ctl for the positional method and test2.ctl for the defined method.

  Scott@orcl12c > host type test.dat

  "04725813" | "aka"Little Will"" | "" 095TDEAN «|» 2013-02-21 - 11.13.44.632000

  "05599076" | "" FIRST NAME - ADDED A 'T' AS ON THE REG MAP | ' 016DDEAL ' |. ' 2014-04-11 - 10.06.35.598000

  Scott@orcl12c > type host test1.ctl

  DOWNLOAD THE DATA

  ADD THE PERSON_MEMO TABLE

  FIELDS TERMINATED BY ' |'

  TRAILING NULLCOLS

  (ID_PERSON POSITION (02:10))

  , TX_MEMO POSITION (14:59)

  POSITION ID_USER (63:82)

  , TM_STAMP POSITION (85:110) EXTERNAL INTEGER (26) ' DECODE (: TM_STAMP, NULL, NULL,).

  TO_TIMESTAMP (: TM_STAMP, ' YYYY-MM-DD - HH24.MI.) SS. "(FF')).

  )

  Scott@orcl12c > type host test2.ctl

  DOWNLOAD THE DATA

  ADD THE PERSON_MEMO TABLE

  FIELDS TERMINATED BY ' |'

  TRAILING NULLCOLS

  (ID_PERSON "TRIM ("------"" FROM: ID_PERSON ")")

  , TX_MEMO CHAR (1000) "TRIM ("------"" FROM: TX_MEMO ").

  , ID_USER "TRIM ("------"" FROM: ID_USER ").

  , TM_STAMP INTEGER EXTERNAL (26) ' DECODE (: TM_STAMP, NULL, NULL,).

  TO_TIMESTAMP (: TM_STAMP, ' YYYY-MM-DD - HH24.MI.) SS. "(FF')).

  )

  Scott@orcl12c > create table person_memo

  2 (ID_PERSON VARCHAR2 (9 bytes)

  3, TX_MEMO VARCHAR2 (1000 bytes)

  4, ID_USER VARCHAR2 (20 bytes)

  5, TM_STAMP TIMESTAMP (6))

  6.

  Table created.

  Scott@orcl12c > host sqlldr scott/tiger control = test1.ctl data = test.dat log = test1.log

  SQL * Loader: release 12.1.0.1.0 - Production Thursday, May 15, 10:53:11-2014

  Copyright (c) 1982, 2013, Oracle and/or its affiliates.  All rights reserved.

  Path used: classics

  Commit the point reached - the number of logical records 2

  Table PERSON_MEMO:

  2 rows loaded successfully.

  Check the log file:

  test1.log

  For more information on the charge.

  Scott@orcl12c > select * from person_memo

  2.

  ID_PERSON

  ---------

  TX_MEMO

  --------------------------------------------------------------------------------

  ID_USER

  --------------------

  TM_STAMP

  ---------------------------------------------------------------------------

  04725813

  aka "Little Will"

  095TDEAN

  21 FEBRUARY 13 11.13.44.632000 AM

  05599076

  FIRST NAME - ADDED A 'T' AS ON THE REG MAP

  016DDEAL

  11 APRIL 14 10.06.35.598000 AM

  2 selected lines.

  Scott@orcl12c > truncate table person_memo

  2.

  Table truncated.

  Scott@orcl12c > host sqlldr scott/tiger control = test2.ctl data = test.dat log = test2.log

  SQL * Loader: release 12.1.0.1.0 - Production Thursday, May 15, 10:53:11-2014

  Copyright (c) 1982, 2013, Oracle and/or its affiliates.  All rights reserved.

  Path used: classics

  Commit the point reached - the number of logical records 2

  Table PERSON_MEMO:

  2 rows loaded successfully.

  Check the log file:

  test2.log

  For more information on the charge.

  Scott@orcl12c > select * from person_memo

  2.

  ID_PERSON

  ---------

  TX_MEMO

  --------------------------------------------------------------------------------

  ID_USER

  --------------------

  TM_STAMP

  ---------------------------------------------------------------------------

  04725813

  aka "Little Will"

  095TDEAN

  21 FEBRUARY 13 11.13.44.632000 AM

  05599076

  FIRST NAME - ADDED A 'T' AS ON THE REG MAP

  016DDEAL

  11 APRIL 14 10.06.35.598000 AM

  2 selected lines.

• Problem with Toshiba Stor.E D10, 1 of 5 TB external HARD drive and eSata connector

  Hello

  I have a problem with eSata HARD drive. I have a toshiba Stor.E D10, 1, 5 to external HDD. When I plug it into the connector back eSata, Windows 7 recognize this and I can read it, but when I try to write about it, it freezes and I have to unplug it. When I connect the Toshiba Stor.E D10 with the USB cable, everything works fine. The problem is when I use the eSata connector. I have updated the BIOS to the latest without any improvement. In the BIOS, I tried esata IDE and AHCI controller without success.

  My system: Windows 7 64 bit Ultimate, card mother Gygabyte GA-X58A-UD3R(rev. 2.0)

  Any help is happy.
  Thank you

  Javier,

  Hello

  Did you check and test the drive external DRIVE with other computers that provide the eSATA interface?
  I think that this should be done because theoretically the problem might be related to the laptop s / s computer eSATA port.

• Problem with Toshiba E.Steel HD 500GB USB 3.0

  Hello guys, yesterday I bought a Toshiba HD 500 GB USB 3.0 e.Steel but I have a problem, if I connect the HARD drive to the USB 2.0 to my laptop hard drive works perfectly, but if I connect to the laptop on the USB 3.0 detects the hard drive (sometimes) and it only works for a few minutes , but if I copy files from drive is disconnected almost immediately... you think it's a problem with the HARD drive or the laptop?

  I have a laptop qosmio x 770 with a one month old
  USB 3.0 port works perfectly with any other USB 2.0 device
  I have the latest driver
  I have windows 7 64 bit

  > I have the latest driver
  > I have windows 7 64 bit
  The latest driver do you mean exactly?
  Are you using the original preinstalled Win7 you have with your laptop (factory settings)?

• TECRA A10 - 11 M - problem with TOSHIBA accessibility

  Hello to the forum.
  I have a TECRA A10 - 11 M (a Greek market system) and after I faced many problems with Windows VISTA
  I installed with Windows XP Professional, the legendary Microsoft OS recovery CD.
  Here I have faced a problem with my buttons of accessibility. My function keys do not work!
  The message is: this system cannot be used "TOSHIBA accessibility.
  I uninstalled and installed again the feature, but nothing happened.
  Y at - it a program known that affect my system and prohibits any accessibility to work properly?
  Can anyone help with this?

  Thank you in advance,
  Vassilis

  _ @ dvass66_
  The FN keys need to installation of common Modules and Hotkey utilities for display devices.
  Common modules must be installed first!
  Also I recommend the update to the BIOS too

  _@korenisko_
  > I think that problem on this laptop is Wifi Atheros card
  I put t know why you think this, but I put agree t
  I have Atheros WLan card and since I use the latest BIOS and WLan driver everything works perfectly.
  Vista turn too stable, but indeed it needs MS patches and update my Vista updates more than once a week...

• Problem with Toshiba authorized service providers

  I have a laptop Toshiba Satellite A300-17.

  Recently, I had the following problem: while the laptop was running normally, whenever I opened it I got a black screen (Please note that the output sound was normal). When I connected the laptop to an external monitor (VGA), I myself went to be normal for her and so I was able to work without any other problems.
  After a while, I decided to get the laptop for service providers authorized by Toshiba in Greece.

  They told me that the problem was the motherboard, that sounded really strange because I had no problem with starting. When I went to get the laptop on their part, I discovered that the computer cannot start.

  So I asked why this is happening and why it worked before and it doesn't work now.
  Their response was that my motherboard was "die slowly" and that they did not open the laptop to check what was wrong with her, but only an online diagnostic test.

  Of all the foregoing, I believe they have done something to my laptop and caused the problem with the motherboard. I tried to contact Toshiba Europe and inform them about the behavior of their authorized service providers by sending an e-mail in Germany ([email protected]), in the hope that they would do something in this regard. Unfortunately, I had no answer.

  Please note that I am a PhD student and my laptop is necessary for my research activity. All this delay has a major impact on my work.

  Who do I contact in order to bypass this?
  Is there anyone in the treatment of cases like that of Toshiba?
  Is it possible that a company like Toshiba just don't care about their customer satisfaction?

  How long should I wait before this problem is solved?

  Hello

  It of really hard to tell how much of the material could be faulty, but if the laptop does not start, then a serious problem of material is possible.
  You said that the internal screen was dark, but you could work with an external monitor attached to the laptop.

  > When I connected the laptop to an external monitor (VGA), I myself went to be normal for her and so I was able to work without any other problems

  Well, that means the motherboard and graphics card might be ok and that the internal display will be affected.
  However, only a technician of the laptop could provide more details, after the material has been checked, so I would say you should get in touch with the guys once more in order to get the extract.

  I found these contact data for the Greece page ASP from Toshiba:
  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT/

  + Ideal Electronics S.A. +
  + www.toshiba-computer.gr+
  [email protected]+
  + P: + 30 2105 193 900 +.
  + F: + 30 2105 193 921 +.

  Good luck

• His problem with Toshiba SATELLITE C650

  Hello

  Here's my problem. I have Toshiba SATELLITE C650 laptop and it has installed 32-bit windows.
  In the last 2 months I am faced with the question with the sound.
  All using the computer like playing any music or any video or any game or whatever it is...
  my sound just went...
  It has no sound, as completely not disappeared even no sound system...
  However, when I restart the system it comes and after a while like 15-20 minutes... He still spent...
  I tried to understand and I found things that I tell you that might help...
  In Device Manager, it's good...
  I tried to update the sound from the Device Manager, but he was declared best driver is already installed.
  I have uninstalled and resinstalled but the same question.
  I have clean boot but still the same thing...
  I also tried to find any log in the event viewer, but found no associated with sound.
  I disabled the sound driver from the Device Manager and when I allow it, the sound comes for some time and time again he's going.
  and after his past, helmet also does not work as well.
  I also tried "Sound troubleshooting of Microsoft", but it also shows that all is well.
  I also scanned for both infections, but nothing found.
  I checked the sound properties but everything shows fine...
  I have good knowledge of computers that I work in tech support industry...
  So please try to solve my problem...
  Thank you
  Brams

  Hi Sarah,.

  First of all, I would appreciate you to provide detailed information in this regard and for trying to fix the problem yourself.

  I suggest you try the steps in the Microsoft Help article and check if it works for you.

  No sound in Windows:

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: skip steps you have tried and try other steps.

  If the problem still persists, it would be better to contact Toshiba support for help, maybe it's a problem with the hardware as well.

  Toshiba support: http://support.Toshiba.com/

  Please reply with the status of the issue, so that we can better help you.

• Audio problems with Toshiba laptop

  So I have a Toshiba laptop with Windows 8, and the noise on this subject with headphones is way way too low, that he was stronger on my old laptop, the speaker volume is strong so I don't understand why headphones are so quiet that I uninstalled the drivers that came with him and got the generic Microsoft High Definition Audio ones , but that did not help either, I made sure all sound bars are completely upward in the settings of the headset and I ensured that no effects were on and that the quality was 24 - bit, it of just the laptop or is there a problem with the driver? is it possible to simply drive the sound from the speakers in the headphone, or is it necessary that when I plug in my headphones must change the one that says earphones. Help? Basically, it seems that the midrange and treble are too low, while the bass is stronger, it sucks.

  Hi Pawel,

  Sorry for the late reply.

  1. Press Windows + X key.
  2. Select Control Panel and then Sound.
  3. Right-click on "helmet", and then select Properties.
  4. Go to the tab improvements .
  5. Ensure that "disable all enhancements" is selected.
  6. Save your changes.
  7. Restart the computer

  Let us know if you are facing a similar question after the computer is restarted.

  Get back to us with the the model number of the laptop, you face problems with so that we can help you.

• Problems with WD drive external HARD with MBP 15' retina

  Hello

  I bought a WD My passport 3 TB about 6 months ago. After awhile it started to act funny: sometimes I plugged the HARD drive, but it did not show up in the office (after trying it a few times, it worked normally) and some files has been corrupted. I passed the test of WD drive utilities and quick test has been authorized, but 'test Drive Complete' failed.

  After the problem has persisted (and laptop computer find drive HARD became harder and harder) I bought an another WD 2 TB HDD to backup data before returning the 3 TB of warranty drive.

  I copied all the info in the new HARD drive, but I find that, although it works 'well' (the computer always finds the drive and never got corrupted files) the new drive passes the "Test of complete transmission" WD drive either utility. Although possible, I suspect that the new drive is not faulty as well.

  Is there a problem with the whole WD drive utilities, or the WD drives don't work really well with the MBP?

  Is there a reliable way to verify the disk HARD WD on Mac?

  Thank you!

  Can you run first aid on the drive and see if something comes along?

• Some problems with Toshiba TV 47L 6453

  Hello

  I have some problems with this TV, as follows

  -I need to re tune the tv several times a day to receive a complete list of channels.
  -The guide shows a TNT channel with program information, when a program is selected, I get a message indicating that the channel can not be tuned. However when I touch the channel it displays the string correctly.
  -Program data is not displayed on several channels. Sometimes this can be improved in re-tuning.

  Can I have a TV that is defective, or is it considered normal for this toshiba tv. I have a lot running off the same ariel who doesn't have these problems of adjustment so I know that it's not that older television.

  Any help here then. Just to add insult the YouTube app decided to stop working. This TV keeps guessing you as to what will work on any given day.
  Without a doubt the worst little waste tech, I had the misfortune to buy for many years. It has a large image. Such a shame, he struggles to view freeview channels, or smart TV applications.
  I will never buy an another Toshiba product again. The previous 7 years tv, that I had to be upgraded is far superior to this piece of unreliable junk. Hope this helps someone to make a wise buying decision. Do not buy this TV and become another victim of toshiba.

• Some problems with Toshiba 40LV933G using the Serbian language settings

  Hello

  I have Toshiba 40LV933g TV a few months already.
  The firmware version is finally a 1.00.08.
  And I have some problems with it, which I think can be corrected in some of the new firmwares (if there is one).

  First of all, when I select Serbian language 'Move' in media player is not translated.

  Secondly when I select the Serbian country in the menu I can't automatically scan for DTV and ATV ATV just of channels.

  Third and the greatest problem is medial Player do not support these last Serbian latin in subbtitles as:? šŠ?? žŽ
  and there is no possibility of changing the size of this last subbtitle. Things like this other brands are already supported.
  * also the time between changing channels is long enough *.

  Best regards.

  I noticed the same problem with subtitle on my TV Toshi when I use the media player (movie recorded on USB key). These Latin letters are not displayed correctly.

  I also hope that this can be corrected with new firmware.

  By the way: do you know where you can download the latest version of the firmware?