Problemas al move vm to host Red

Similar Questions

• I use Vista, Windows Movie Maker. Problem publishing movies on computer.

  I use Vista, Windows Movie Maker. Problem publishing movies to Computer.When publish a movie in windows movie maker help it complete custom, stops at a certain % and remaining time increases.

  I use Vista, Windows Movie Maker. Problem publishing movies to Computer.When publish a movie in windows movie maker help it complete custom, stops at a certain % and remaining time increases.

  ===========================================
  More than likely you are using one or more incompatible source files...
  or the project may be too complex for your system resources.

  See the following article:

  Movie Maker - problem solving-
  "Can't save a movie."
  http://www.Papajohn.org/MovieMaker-issues-CantSaveMovie.html

  Might be worth trying to convert your video files in .wmv format
  before you import into Movie Maker.

  The following freeware can convert:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, wmv

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• VSphere Orchestrator (vco) - problem to add a Powershell host

  Hello world

  I am currently set up a VSphere Orchestrator server and I have a few problems to add a new host via WinRM with Add a PowerShell host model.

  I followed this tutorial:

  http://blogs.technet.com/b/meamcs/archive/2012/02/25/how-to-force-WinRM-to-listen-interfaces-over-HTTPS.aspx

  I can connect with Powershell to a second server HTTPS but not with the vco...

  This is my setup:

  PS WSMan:\localhost\Client> winrm get winrm/config
  Config
      MaxEnvelopeSizekb = 500
      MaxTimeoutms = 60000
      MaxBatchItems = 32000
      MaxProviderRequests = 4294967295
      Client
          NetworkDelayms = 5000
          URLPrefix = wsman
          AllowUnencrypted = true
          Auth
              Basic = true
              Digest = true
              Kerberos = true
              Negotiate = true
              Certificate = true
              CredSSP = false
          DefaultPorts
              HTTP = 5985
              HTTPS = 5986
          TrustedHosts
      Service
          RootSDDL = O:NSG:BAD:P(A;;GA;;;BA)(A;;GR;;;IU)S:P(AU;FA;GA;;;WD)(AU;SA;GXGW;;;WD)
          MaxConcurrentOperations = 4294967295
          MaxConcurrentOperationsPerUser = 1500
          EnumerationTimeoutms = 240000
          MaxConnections = 300
          MaxPacketRetrievalTimeSeconds = 120
          AllowUnencrypted = true
          Auth
              Basic = true
              Kerberos = true
              Negotiate = true
              Certificate = false
              CredSSP = false
              CbtHardeningLevel = Relaxed
          DefaultPorts
              HTTP = 5985
              HTTPS = 5986
          IPv4Filter = *
          IPv6Filter = *
          EnableCompatibilityHttpListener = false
          EnableCompatibilityHttpsListener = false
          CertificateThumbprint
          AllowRemoteAccess = true
      Winrs
          AllowRemoteShellAccess = true
          IdleTimeout = 7200000
          MaxConcurrentUsers = 10
          MaxShellRunTime = 2147483647
          MaxProcessesPerShell = 25
          MaxMemoryPerShellMB = 1024
          MaxShellsPerUser = 30
  
  

  PS WSMan:\localhost\Client> winrm enumerate winrm/config/listener
  Listener
      Address = *
      Transport = HTTP
      Port = 5985
      Hostname
      Enabled = true
      URLPrefix = wsman
      CertificateThumbprint
      ListeningOn = 127.0.0.1, 169.254.152.175, 192.168.1.139, ::1, 2001:0:5ef5:79fb:2087:3306:fde2:7302, fe80::5efe:192.168.1.139%14, fe80::2087:3306:fde2:7302%15, fe80::c19d:d401:ff68:98af%13, fe80::c407:cc5e:43dc:6909%18
  
  
  Listener
      Address = *
      Transport = HTTPS
      Port = 5986
      Hostname = host-vsphere.urbanvirtu.local
      Enabled = true
      URLPrefix = wsman
      CertificateThumbprint = 4f00d909810f619876bf5712a22e0fb21382d628
      ListeningOn = 127.0.0.1, 169.254.152.175, 192.168.1.139, ::1, 2001:0:5ef5:79fb:2087:3306:fde2:7302, fe80::5efe:192.168.1.139%14, fe80::2087:3306:fde2:7302%15, fe80::c19d:d401:ff68:98af%13, fe80::c407:cc5e:43dc:6909%18
  
  

  If I try to connect from a second server via Kerberos with HTTPS it works:

  PS C:\Users\Administrator> winrm identify -r:https://host-vsphere.urbanvirtu.local:5986 -a:Kerberos -u:administrator -p:password
  IdentifyResponse
      ProtocolVersion = http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd
      ProductVendor = Microsoft Corporation
      ProductVersion = OS: 6.3.9600 SP: 0.0 Stack: 3.0
      SecurityProfiles
          SecurityProfileName = http://schemas.dmtf.org/wbem/wsman/1/wsman/secprofile/http/basic, http://schemas.dmtf.org/
  wbem/wsman/1/wsman/secprofile/https/basic, http://schemas.dmtf.org/wbem/wsman/1/wsman/secprofile/http/spnego-kerberos, h
  ttp://schemas.dmtf.org/wbem/wsman/1/wsman/secprofile/https/spnego-kerberos
  

  But with the vco I:

  Name: test

  The Host/IP: Home - vsphere.urbanvirtu.local

  Port: 5986

  Type remote PowerShell: WinRM

  Transport protocol: HTTPS

  Authentication: Kerberos

  Session mode: A shared Session

  User name: administrator

  Password: password

  

  

  Someone has had this problem before? What I did wrong?

  Thanks in advance for your help.

  Best regards

  Jean

  Based on the log, I see that "Connection refused:" error was connected to the kdc parameter in the krb5.conf file and you have already defeated it.

  Now, if I understand 'Add a PowerShell host' the workflow remains in working condition and does not end.

  This behavior I observed in the case of PowerShell plugin 1.0.3 is trying to connect to PowerShell host running PowerShell 4.0.

  Would you please provide version of

  the PowerShell vCO plugin version

  PowerShell host - Windows Version

  PowerShell host - PowerShell version

• How can I move live sites hosted in BusinessCatalyst of composition creative cloud for a new creative cloud membership without using the partner or partner codes portals?

  How can I move live sites hosted in BusinessCatalyst of composition creative cloud for a new creative cloud membership without using the partner or partner codes portals?

  I don't think you can but your best bet is to contact the support of the BC and see what they can do.

• Do not click on in the VM and can not move files between hosts and virtual

  Do not click on in the VM and can not move files between hosts and virtual

  Home - Windows XP x 64 Edition

  Virtual - Windows 2003 Web Edition

  -vmware.log

  ...

  sept 23 14:10:17.875: mks | Setting size 40 pile of thread to 1048576.
  sept 23 14:10:17.875: mks | Adjusting size of 41 of the stack of the thread to 1048576.
  sept 23 14:10:17.890: mks | USBGW: Writing referee op: 13 len:36
  sept 23 14:10:21.718: vcpu-0 | Unified TOOLS loop capacity requested by 'box to tools-MDN; now sending via the TECO
  sept 23 14:10:21.718: vcpu-0 | GuestRpc: Channel 7, toolbox-MDN app reviews.
  sept 23 14:10:21.718: vmx | DnDRegisterRpc: Rpc of DND already set to 1
  sept 23 14:10:21.718: vmx | CopyPasteRegisterRpc: already the value 1
  sept 23 14:10:21.890: vcpu-0 | VMXVmdb_LoadRawConfig: Loading of raw configuration
  sept 23 14:10:22.000: vmx | DnDRegisterRpc: Rpc of DND already set to 1
  sept 23 14:10:22.000: vmx | CopyPasteRegisterRpc: already the value 1
  sept 23 14:10:23.750: mks | USBGW: Writing referee op: 13 len:36
  sept 23 14:10:30.703: mks | Setting size 40 pile of thread to 1048576.
  sept 23 14:10:30.718: mks | Adjusting size of 41 of the stack of the thread to 1048576.

  ...

  Any ideas?

  Thank you

  If your license key allows, update your VMware Workstation version 7.1.4

  Otherwise, at least upgrade your VMware Workstation to version 7.0.1

  In the menu bar, help-> Check for Updates on the Web.

• Problems with a Vimeo video hosted in a sensitive site of the MUSE

  I've hosted video on Vimeo, but which is superb and integrated video in my site very simply Muse - I'm having a lot of trouble with the option full screen and audio - obviously a very delicate area.

  I decided that I had to move the embedded code I hit various break points, opening with a slightly smaller video.  I looking good on the size of the office, but when it comes to the low resize in tablet, I am having some problems when I try to go full screen.  In one case he has no audio data in another, she has audio, but no picture...  Not sure if this is a Vimeo or a problem of MUSE.

  There is perhaps a model that can do this, but I have not found one that really works the video player from 1920 x 1080 to the size of the phone.

  I am working with the CC MUSE 2015.1 version, works on an iMac for two years with processor 1.4 GHz Intel Core 5 and 8 GB of RAM, running OSX Yosemite 10.10.5.

  I would like to share the link, but the video is protected for now, sorry.

  Thank you!

  You must read on how Vimeo use different platforms and different sizes flow and how it can be applied by setting the player's options.

  Mylenium

• Connectivity problem of virtual machines the host is rebooted.

  We restarted our esxi host and after reboot, we receive questions, with the connectivity of virtual machines hosted on that particular esxi only.

  The problem is that some virtual machines communicate on the network and some are not.

  There are two hosts in the cluster, if move us the virtual machines on another host, virtual machines are running well.

  The host has the same configuration with respect to the physical networking and configuration of virtual networking is concerned.

  ESXi version: 4.1

  You mentioned that host network configuration and good host network configuration problem is the same.

  Issues appeared after reboot the host, and until the battery has been replaced.

  I guess that something is wrong at the physical end itself.

  Is that possible, that you can stop the host again and obtain reinstalled network and power it turn it on again and test it.

  Because when the battery change is done server is put out of the rack, so I'm assuming that n/w card were not seated correctly. I have faced this kind of problem once and I did the same thing and things worked well for me.

• Satellite T110-107: touchpad problem - pointer move sometimes

  Good afternoon everyone,

  Currently I have a series of Satellite T110-107 and have problems with the touchpad.

  I start the computer and the touchpad works very well for a few seconds, after that, the touch pad stops working to full capacity.
  If I wander my fingers on the touchpad and the pointer does not move, sometimes it will move up and down, but not as it should.

  It is a common problem, or is it a hardware problem... or is it the fact that I'm just not accustomed to having the correct settings on windows7?

  All help reveal be great, because it's very frustrating!

  Kind regards!

  Hello

  I found a few tips and tricks that you should try.

  First, you must change the sensitive touchpad settings to lower the level.
  Go to control panel-> mouse and all the settings for the touchpad to the value has a less sensitive level.

  You should also right click Synaptics Pointing Device (in the taskbar) and get in the middle of the page Double click speed on.
  Move the slider to half way down the beach. This should help you too.

  Last but not leas, you will need to disable zoom pinch.
  Go to the icon in the lower right corner Synaptics pointing device, click on 'The pointing device properties', click on the "Device settings" tab, then the settings button. Uncheck "Enable Pinch Zoom" under "Pinch Zoom".

  Greetings

• ! Difficult problem!  Move iTunes songs to the empty folder to automatiquementala

  Hello everyone.

  It's my frist time write a discussion here, desperately looking for your help

  I checked the other similar discussions and I can find none, that has the same problem as mine.

  Anyway... my iTunes is updated and therefore my iPhone 5 s.

  I've always used automatically add them to the iTunes folder to add music from my iTunes library.

  (after that music has been transferred to the ' automatiquementala file it IMMEDIATELY disappeared, but the song was in the iTunes library)

  One day, as I noticed a few circles on the left side of my songs in the iLibrary. These songs were not playable, and whenever I

  sync my phone I got (100errors) that the songs could not be transferred to my phone. (Song couldnot be used because the original file cannot be found. You want to locate)

  Even if I wanted to move each song, I would choose the automatically add to iTunes folder (BUT ITS EMPTY). I can't find the music anywhere on my hard drive.

  I gave up those songs and decided to download again them once I find the time.

  Recently, I backed up and restored my iPhone 5 s. After I restore, I noticed that a lot of my songs did not appear on her

  (those who did not appear in the iLabrary too).

  Today I decided to download all these "missing songs" and it took me at least 3 hours. All happy I've put them in the damned automatically add to iTunes folder, plugged my iphone with itunes and sync. After syncing I started testing in my iphone and I noticed that only 20 of 70 + songs were on my phone (most of them was gray and unplayable, so I resynced, that did the trick). But other songs were not there! I checked my doomed automatiquementala file once its empty and I don't know what to do with my life haha

  Please guys, help. And if you can do it step by step, because im not really a pro with computers

  and other things (btw im using a Windows 7 or 8 I think haha)

  The folder add automatically to iTunes acts as an area of "file" for users (and other software).  When the files are placed in add it automatically to iTunes they will be handled by iTunes (immediately if it is currently running, otherwise next time that he istarted) and added to the iTunes library.  The files placed in add automatically to iTunes will be moved to the standard locations within the structure of library iTunes, determined by:

  • the iTunes Media folder location setting in Edit > Preferences > advanced, and
  • the values of metadata in media files are added.

  If you use the default location of folder media (C:\Users\username\Music\iTunes\iTunes Media) then your files will be moved to folders named according to this model:

  • C:\Users\ username \Music\iTunes\iTunes Media\Music\ artist \ album

  The only exception to this is the case where the indicator 'Part of a compilation' is defined in the media files - the names of standard folders will then be:

  • C:\Users\ username \Music\iTunes\iTunes Media\Music\Compilations\ album

  If you have selected the option "organize files...". "in Edit > Preferences > advanced files, if necessary, is renamed to use the disc number, track number and the name of the song as a basis for file names.  Very long folder/file names will be truncated to 36 characters (which can have strange side effects if you have two albums whose names only differ after that limit exceeded - you end up with a folder containing two album titles).

  After the addition of new media in your library, the add automatically to iTunes folder must be empty: the only exception is when the media files are in a format that iTunes cannot handle or the files are corrupt: in this case, you will see a subfolder "not added".

  In your case, it seems more likely that the files have been added to your iTunes library you or another piece of software has moved or renamed multimedia files, or that the disk on which the files were placed is no longer available on iTunes.  If you can post (using screenshots of preference):

  • Your settings in Edition > Preferences > advanced
  • The location held by iTunes for one of the tracks that cannot be located (for this, right click on one of the songs display next to his name, select Get Info, when you see this message (of course with the name of your song "disappeared")):
  
  
  Click on no, then click on the file tab - the location information that is held in the iTunes database will appear at the end of the list in the window, starting with "file://localhost", like this:
  

  Then it should be possible to diagnose your problem and propose a resolution itself.

• Problema no Movie Maker XP

  Movie Maker XP tem um problema MEU. Zingari o video, esta tudo bem, mas quando EU passo vai sem imagem of Storyboard pro

  You posted in the English version of the Microsoft Answers forums. Please repost your question by selecting your language in the drop-down menu at the top of this page or by going to the international section of this Web page:

  http://www.Microsoft.com/communities/forums/default.mspx

   

  Translation of Bing above:

  Voce go na versão em lingua inglesa Foruns Microsoft Answers back. Por favor reenviar sua question selecionando seu idioma drop na parte superior desta UO indo ate a secao internacional desta page Web page:

  http://www.Microsoft.com/communities/forums/default.mspx

• Problem connecting to the local host

  I am trying to connect to my localhost server if I can use my program of EasyPHP.  I tried connecting on Internet Explorer and Firefox but not able to connect to the local host. When I ran Windows diagnosis, I got this error message

  "localhost is not configured to establish a connection on port"World Wide Web Service (HTTP)"with this computer.  -What this means and how can I solve the problem? Could a firewall be the cause?
  I have mysql on my computer. When I ran today, he did let me get to my databases. When I used the root username, it not let me access it. Usually, I'm able to access without having to use a user name or password.  Don't you think that this has nothing to do with why I can't connect to the local host to my internet?
  Thank you.

  Hello

  I suggest you post the same question in the Microsoft Technet forum for assistance.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro

• Problem playing Movie DVD Maker

  "Movie Maker" to burn the DVD in the past. Everything worked fine and still play DVDs without problem. Manufacturing DVD now works fine all the way including "Overview". The burn process ends, but when I play the DVD (will play on any player) the video compressed on only half of the screen (horizontally) the bottom half is green. 'Menu' executives are also screened. The audio is good. Reset the filters 'default', but still have the same problem. Any ideas?

  Thank you for your response. On further investigation, I found that if the files have been marked ".avi", they were actually converted 'Divx' files. Used a program that can handle Divx files and dvd has proved that the fine. Again, thank you for your response.

  JC

• Audio problems in Movie Maker

  I have audio problems with windows movie maker, my speakers are on & works with itunes that do I do? The sound is not muted and if I go to youtube or I can listen to the music from itunes, but when I try to watch a movie that I created in windows movie maker, it plays, but just with no sound... Also, I can't play instrumental music files (which are downloaded) in a movie instead, I did being able to hear mp3s, I downloaded & I used to be able to play in a film I've done... I have no viruses either so I need to know what the problem is... I have antivirus protection & it automatically gets rid of the virus if I computer, so this isn't the problem, please HelP!

  Movie Maker has compatibility issues with. MP3 files...
  It may be worth trying to convert the. MP3 files to the
  . Format WMA before you import into Movie Maker.

• Problems to move and rename directories with Windows 7

  I'm having intermittent problems, move, and rename directories on a network in Windows 7.

  It seems to be related to indexing and the thumbs.db which is planted in each directory. Sometimes after I've removed the thumb, I can rename or move the directory, but sometimes not.
  A way to solve this annoying problem?

  Hi Brett!

  Read here how to disable the thumbs.db: http://www.itguyfixit.com/2009/07/removingdisable-thumbsdb-windows-xp.html

  (Ignore the link title: also works for Win 7)

  See you soon
  Julia

• Problem recording movi to VCSe (VCSC work)

  Hello

  for some reason any Jabber client video are not able to log on to VCSe. If they are in the office and connect to the VCSC his work.

  Deployment:

  VCS: 7.2.2

  TMSPE: 14.2

  VCSC is joined to the domain, so people should be able to login with LDAP credentials. Since a few days we have changed an OU for users in AD. I resynced the TMS users. In VCSC my thought is that I have nothing to do, right? I do not know its function, change OR cause the customer movi is not som uch in use.

  I started track of debugging on VCSe registration go external with movi (IP addresses and names have been changed):

  SIPMSG:

  | SIP SUBSCRIBE:@domain.comSIP/2.0

  Via: SIP/2.0/TLS 192.168.100.10:3157; branch = z9hG4bK06fbfdf1d928fdea44551eb01444f279.1; received = 78.51.4.182; = 45938 rport

  Call ID: [email protected]/ * /.

  CSeq: 201 SUBSCRIBE

  Contact: <> @192.168.100.10:3157; transport = tls >

  From: <> @domain.com >; tag = ff9e0e9142437b34

  To: <> [email protected] / * />

  Max-Forwards: 70

  Directions:

  User-Agent: TANDBERG/774 (4.5.7.16762 PCS) - Windows

  Expires: 300

  Event: ua-profile;model=movi;vendor=tandberg.com;profile-type=user;version=4.5.7.16762;clientid="S-1-5-21-176747291-1711663684-1688638919";connectivity=1

  Accept: application/pidf + xml

  Content-Length: 0

  SIPMSG:

  | SIP/2.0 404 not found

  Via: SIP/2.0/TLS 192.168.100.10:3157; branch = z9hG4bK06fbfdf1d928fdea44551eb01444f279.1; received = 78.51.4.182; rport = 45938; DefaultZone = ingress-box

  Call ID: [email protected]/ * /.

  CSeq: 201 SUBSCRIBE

  From: <> @domain.com >; tag = ff9e0e9142437b34

  To: <> [email protected] / * />; tag = a9bdf7d526c0cb56

  Server: TANDBERG/4120 (X7.2.2)

  WARNING: 79.34.34.123:5061 399 'political response '.

  Content-Length: 0

  So we have a 404 not found error, but why and what is not found, the user who tried to connect? For some reason, it seems that demand is not going through VCSe VCSC, it is my feeling?

  Auth area is as follows:

  VCSe:

  DZ: do not check the credentials

  TZ: do not check the credentials, accept records submitted by proxy: refuse

  DSZ: do not check the credentials, registration: refuse

  VCSC:

  DZ: verify the credentials

  TZ: verify the credentials, accept records sent by proxy: enable

  DSZ: verify the credentials, registration: enable

  I also implemented a CPL on VCSe (not on the VCSC) but I have disabled also the policy tried it unsuccessfully with so this should not be the problem.

  I tested a few other constelattion without success. :-( Maybe someone has an idea of what I can test. What is a firewall issue?

  Concerning

  Thorsten

  Hello

  Could check you if the 'Record SIP proxy Mode' setting is on "Known Proxy" only on Hwy VCS? You will find this SIP configuration setting.

  This is a required parameter for allow VCSe work as a proxy SIP for registration. It is not enough to define 'Recording proxy Acept' control VCS. In general, you should have this record transmitted by proxy configuration:

  

  If you don't want to use the proxy record but jabbers on the internet for you sign up directly for VCSe, you must disable the Save proxy functionality and create the SIP domain in VCS Expressway. It would be something like this:

  

  Try this.

  Paulo Souza

  Please note the answers and mark it as "answered" as appropriate.