Problemi esxi4 Velocità rete

Similar Questions

• VMware esxi5 problemi con the rete. The comments not effettuano he ping back the host

  Hello to all,

  STO sbattendo tested con questo problema da at least due giorni e non capisco causa.

  Macchine comments sound provviste di due schede di rete ognuna delle quali punta ad UN vSwitch (vSwitch0-> vmnic0,-> vmnic1 vSwitch1).

  The prima anomalía sorge quando, tramite vSphere Client clicco sulle info delle vmnic, ed ottengo "Cisco Discovery Protocol is not available on this physical."

  adapter. Typing sulla shell he comando esxcfg-vswitch - b vSwitch0 ottengo two quindi in theory should be abilitato.

  The adapters sono delle Broadcom NetXtreme II BCM5709 1000Base-T network. By material questo ho anche da aggiornamento driver

  downloaded a questo link http://downloads.vmware.com/d/details/dt_esxi50_broadcom_netxtreme_17034v501/dCV0YnRAJXdidGVkZA==

  Unfortunately he problem persists. Some suggestions?

  Grazie anticipatamente.

  P.S. the community of Bella!

  Ciao,.

  da quello che vedo nello schema the vmk0/1 non sono taggate mentre I portgroup delle TR VM: a di seconda come sono gli switch substitutes devi indicare o the vlan corrretta sui vmk0/vmk1o n the vlan dai portgroup delle VM... is not information switch sugli hai substitutes... the ISP had to prove

  Giuseppe

• PowerEdge 2900 - Problema scheda di rete [CF]

  Buongiorno,

  Abbiamo server it oggetto if e rotta scheda di rete che essere una pulito dove:

  INTEL PRO/1000 PT Desktop (D33745) PCI Express adapter

  Announcement of is it Server e UN CTP (Computer To Plate) e della Kodak ha we must di tale scheda by communication con esso.

  Ho tried e altre schede con con quella integrata al server, my vanno in error the rasterizzazione del file durante da incidere.

  I wanted to get to e possibile che this no forniate una.

  Grazie

  PrintSprint S.r.l.

  Buongiorno,

  non vedo scheda di rete tra i di original del server components. E' possibile che sia stata twice later con UN ordine a parte, o altro server of da UN?

  Grazie

• iPhone if disconnette dalla rete wifi quando e in stand by e no arrivano notifiche di messaggi, whastapp e mail

  Salve a tutti,

  Ho da poco labor-intensive UN iPhone 5s nuovo da 16 GB e da pochi giorni ho noticed he following problema: dopo a periodo di some UNAMET da quando block the screen, it wifi if disconnette e quando paper the screen, the linea wifi TR riconnette dopo few e secondo the e che tutti gli imessage diretta conseguenza, I send whatsapp e messaggi , arrivano in e remember mi are not notify all' arrival. Questo fino a pochi giorni fa no accadeva. Ho ripristinato he telefono come nuovo e Ho aggiornato (iOS 9.2.1), ho router resettato it my questa cosa continued a sometimes. Sapreste tell is forward-looking questo da UN don't dell'antenna wifi del mio iPhone oppure da una functional di cui non ero a knowledge, che probabilmente dispersion o disattiva instradamento wifi per ridurre lo spreco della batteria? Grazie

  Anche io ho da tempo questo problema, ho resettato router Wi - Fi, iPhone e iPad my he problem persists any rete WiFi con. Just bloccato a TR disconnette volte, a volte anche mentre TR use there phone. Really un problema molto fastidioso, escluderei categoricamente che if tratti di una functional come invece leggo some support, prima dellaggiornamento an iOS 9.1 (circa) non avevo some tipo di problema.

  In fact many functional legate al wifi if svolgono proprio mentre he telefono e bloccato e conesso come backup, caricamento foto sulla libreria, aggiornamento applications, musical libreria aggiornamento... No would by tanto senso.

• It could esserci verificato a problem with pilot he della scheda outdo rete wireless

  It could esserci verificato a problem with pilot he della scheda rete riesco conetermi wireless wireless.non outdo

  Rental select your language from the drop-down at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:
  

  Buongiorno

  If get di rates the lingua dal menu a discesa by send her tua domanda nella vostra scelta di lingua. Forum it cui hai posted by e by solo inglese. SE non riesci a find wishes of the lingua, he supporto delle options by Esil international further if can find following he link that sotto:

  Grazie

  http://support.Microsoft.com/common/international.aspx

• ESXi4.1 in Vcenter 5 vmotion problem

  Hello

  I'm in the process of migrating my virtual infrastructure Vmware 5.

  I installed a new vCenter (build 455964) and I migrated all the hosts to vCenter 4.1 for my new vCenter.

  I have IBM HS22 14 blades. In 2010, we bought the first 9 blades and the last this year.

  They are all equipped with 2 processors six cores x 5650.

  My problem is that I am not able to vmotion of virtual machines between the new blades and the older, those same processors are the same.

  The error is: host CPU is not compatible with the requirements of the virtual machine to CPUID level 0 x 1 'ecx' register Inconsistency detected for these characteristics: * PCLMULQDQ and * AES-NI.

  I can't activate the VCA mode as I can't turn off the virtual machines.

  I tried to update the firmware/bios on the blades, but the result was the same.

  Has anyone of you has met with such a problem? Is this a bug of vCenter?

  Thank you

  Razvan

  This isn't a bug with vcenter 4.1.

  There is a feature of IBM Blade Server called AES (Advanced Encryption Standard). What stop perform vmotion.

  You must disable new AES blade IBM HS22 and add this host to group and see vmotion works like a charm. We had the same problem and we have resolved to disbaling AES on ibm HS22 blade.

  See the under IBM KB for the question:

  http://www-947.IBM.com/support/entry/portal/docDisplay?lndocid=MIGR-5086963

  Price point of useful and correct answer by clicking on the sub tab

• GarageBand 10.1.2: How to overcome the problem of speed when the disagreement.

  In GarageBand 10.1.2 I detuned piano project using Apple to Pitch so that it is in line with a backing track that lies between keys (e.g., between d major and Eb major.) It works fine, but after I got out of tune there is a lag time in performance; a note sounds a split second later than when hit. I tried to use "velocity" setting nothing helped.

  Does anyone know how to overcome this problem of latency?

  Move your backing track a little after you save your piano.

• Problem connecting WLan on Satellite A60-186

  I have a problem with Atheros AR5004g wireless network card on my PC since I bought it.
  The problem is that if I try to connect the PC to any WiFi network that is found in the 'network' the system startup list to try the connection and write me this message: ' Attesa disponibiliti¿½ rete in corso "or... in the meantime translated"the availability of the network. but the connection never starts.

  But... and it's funny... If I set up as manual connections of the "network list" a set up as the only automatic connections (e.g. access point) and I turn off the access point I can see it disappear in the form of the "network list". If I turn on once more and click on update network list, the wireless connection to the access point will automatically launch. The IP address and DNS address are automatically given to the system and it starts to work. But if I close the connection I can not connect once more (unless I'm not the same game).

  The thing is that:
  -l' wireless adapter works (it doesn't is not out of the question use should not function even with 'games')
  -I can not connect to any network 'normally '.
  Can someone help me understand what the problem is?
  Is it possible that I need to update the wireless adapter driver?

  Thanks in advance for your help.
  Ciao

  Hello

  Your ad is a little confusing.
  You do not write on the connection. Have you used the windows WLan configuration or the Atheros WLan utility?
  I advise to use the Atheros Wlan utility to configure the WiFi connection, because it is an Atheros Wlan card.
  Of course, you can also check the availability of updates. If the new driver has been on the Toshiba site so you can try to install it.

• Velocity of myRio accelerometer

  Hello!

  I need to take "on a car' of MyRio acceleremoter. Theoretically, it seems easy. I need to integrate the signal to acceleremote to get my speed. But I do not know what block of integration I use, because I have problems with the date type.

  Please, can you help me and call me a screenshot of the schema?

  Thank you very much

  New to labview myrio

  

  Hello

  Conversion acceleration in the speed/movement or movement speed requires the digital integration. In LabVIEW, you can take the accelerometer measures and represent this signal in acceleration, speed or movement by running the example VI.

  The following links provide no VI that the exact feature you are asking to do, but they do something similar.

  You may find them useful.  Happy coding!

  https://decibel.NI.com/content/docs/doc-5143

  https://lavag.org/topic/12866-velocity-curve-from-acceleration/

  Bravo welcome

  Regars

  Santhosh Joel

• Buonasera, ho a hp Pavilion g6 laptop e da some giorno ho problemi con scheda wireless.

  Buonasera, ho a hp Pavilion g6 laptop e da some giorno ho problemi con scheda wireless. in apparenza funziona, master in realta' non trova outdo any. con a pc powerful trovo reti meno altro e mi connect senza problemi. Ho reinstallato pilot he nessun risultato my. diagnostica mi dice che e' tutto a posto. It seems aver potenza personally he marked. Come posso risolvere?

  Hello

  Sorry, this forum is in English only.

  Please select the language icon at the bottom of this page English and select your native language from the popup list to view the forums in the language of your choice.

  If you can't find the language of your choice, support for international sites additional options can be found by clicking on the following link:

  http://support.Microsoft.com/common/international.aspx

  Concerning

• shared variable creates sound - problem, save data in crio

  Hi all

  I have a problem here...

  Why I get noise when using shared variables in my labview code...

  but when I remove these shared_varibles, the sounds are totally reduced...

  I use the shared variable for the data record. For the recording of data, I do a VI special folder under my computer. During my actual code CRIO.

  These two screws are to communicate using shared variables. Is there a better way to make the real-time recording apart from the use of shared data variables?

  I tried to record data directly to CRIO but it always fails... That's why I do a special VI under workstation for the logging of data...

  But if shared variables create sounds... my data record is no longer valid...

  Please help me...

  I downloaded some pictures... I hope that makes my problem clearly to you all...

  Hello auralius,

  Are these plots you have posted on the graph of velocity on the block diagram?

  I think that shared variables are affecting the timing of your loop and so affect the outcome.  I suggest you to add code to check if one of the iterations is late.  I suspect that the end iterations will correspond to the bad data that show you.

  You can try to enable the RT FIFO on the shared variable or you may need to add a second loop of communication and use a form any local communication to pass data to it.

  Take a look at http://zone.ni.com/reference/en-XX/help/370622G-01/TOC1.htm, including the sharing of data in deterministic Applications section for more information.

  Let me know how it goes,

  Sebastian

• Cannot use my Vista to play older pc games (Fly! a 1999 version of the Terminal Velocity)

  Hello, I have not been able to play a PC game called: fly! Terminal velocity, a 1999 edition, I tried many things by other sites as sugested: properties ckliking on the icon of the game and the Compatibility tab and switch to compatibility mode for older versions of windowas and also to change the levels of adjustment and or privileges, but not always working do not and that's what he said : MICROSOFT WINDOWS: FLY! AT STPPOED A LABOR PROBLEM CAUSES THE PROGRAM STOP WORKING WINDOWS CLOSES THE PROGRAM AND THE NOTITY YOU IF A SOLUTION IS AVAILABLE.

  I don't see any notification not where any ways the thing is that I could not play this game can someone guide me in what else to do?

  Some older games will not play on Vista no matter what you do. Some older games will not play on Windows 7 either. Some games that play on Vista won't play on Windows 7 etc etc.

• Error:-05... What is this issue and how to solve this problem, please.

  Error - 05 appears permanently on the desktop, without any help in identifying or fixing.  What is is? In addition, who or what is Imunet...? Safe, or a marketing scam?

  Hi Francine retti,.

  (1) what is the complete error message you receive?

  (2) this error message appears when you are online or offline?

  Select the boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• Problem on site to site and between router vpn client series 2,800

  Hello

  I need a little help.

  I have 2 office of connection with a site to site vpn

  Each site has a dry - k9 router 800 series.

  Each router has actually client ipsec vpn active and all users can connect by using the client vpn with no problems.

  I added the lines for the vpn site to another, but the tunnel is still down.

  Here the sh run and sh encryption session 2 routers:

  OFFICE A

  version 15.3
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  OFFICE-A-DG host name
  !
  boot-start-marker
  boot-end-marker
  !
  AQM-registry-fnf
  !
  !
  AAA new-model
  !
  !
  AAA authentication login default local
  AAA authentication login xauthlist local
  AAA authorization exec default local
  AAA authorization exec vty group xauthlocal
  AAA authorization exec defaultlocal group bdbusers
  AAA authorization groupauthor LAN
  !
  !
  !
  !
  !
  AAA - the id of the joint session
  !
  Crypto pki trustpoint TP-self-signed-220561722
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 220561722
  revocation checking no
  rsakeypair TP-self-signed-220561722
  !
  !
  TP-self-signed-220561722 crypto pki certificate chain
  certificate self-signed 01
    
  quit smoking
  !
  !
  !
  !

  !
  !
  dhcp WIRED IP pool
  Network 10.0.0.0 255.255.255.0
  router by default - 10.0.0.254
  Server DNS 10.0.0.100
  !
  !
  !
  8.8.8.8 IP name-server
  no ip cef
  No ipv6 cef
  !
  !
  !
  !
  !
  Authenticated MultiLink bundle-name Panel
  !
  !
  !
  !
  !
  !
  !

  !
  !
  !
  !
  !
  VDSL controller 0
  !
  property intellectual ssh rsa ssh key pair name
  property intellectual ssh version 2
  property intellectual ssh pubkey-string
   
  !
  !
  crypto ISAKMP policy 3
  BA 3des
  preshared authentication
  Group 2
  !
  crypto ISAKMP policy 20
  md5 hash
  preshared authentication
  OFFICE-B-IP address ISAKMP crypto key XXXXX
  !
  ISAKMP crypto client configuration group remoteusers
  key XXXX
  DNS 10.0.0.100
  WINS 10.0.0.100
  domain.ofc field
  pool ippool
  ACL 101
  !
  !
  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
  tunnel mode
  Crypto ipsec transform-set esp - esp-md5-hmac xauathtransform
  tunnel mode
  !
  !
  !
  Crypto-map dynamic dynmap 10
  Set transform-set RIGHT
  Crypto-map dynamic dynmap 20
  Set transform-set RIGHT
  !
  !
  map clientmap client to authenticate crypto list userathen
  card crypto clientmap isakmp authorization list groupauthor
  client configuration address map clientmap crypto answer
  10 ipsec-isakmp crypto map clientmap Dynamics dynmap
  20 ipsec-isakmp crypto map clientmap
  defined OFFICE-B-IP peer
  Set transform-set RIGHT
  match address 115
  !
  !
  !
  !
  !
  !
  !
  ATM0 interface
  no ip address
  No atm ilmi-keepalive
  PVC 8/35
  aal5mux encapsulation ppp Dialer
  Dialer pool-member 1
  !
  !
  interface Ethernet0
  no ip address
  Shutdown
  !
  interface FastEthernet0
  INTERNAL description
  switchport access vlan 10
  no ip address
  !
  interface FastEthernet1
  no ip address
  Shutdown
  !
  interface FastEthernet2
  switchport access vlan 10
  no ip address
  !
  interface FastEthernet3
  switchport access vlan 10
  no ip address
  !
  interface Vlan1
  no ip address
  Shutdown
  !
  interface Vlan10
  IP 10.0.0.254 255.255.255.0
  IP nat inside
  IP virtual-reassembly in
  !
  interface Dialer0
  the negotiated IP address
  NAT outside IP
  IP virtual-reassembly in
  encapsulation ppp
  Dialer pool 1
  Authentication callin PPP chap Protocol
  PPP pap sent-name of user password xxx xxx 0
  clientmap card crypto
  !
  router RIP
  version 2
  10.0.0.0 network
  network 192.168.1.0
  !
  IP local pool ippool 10.16.20.1 10.16.20.200
  IP forward-Protocol ND
  no ip address of the http server
  no ip http secure server
  !
  !
  the IP nat inside source 1 interface Dialer0 overload list
  overload of IP nat inside source list 101 interface Dialer0
  IP route 0.0.0.0 0.0.0.0 Dialer0
  !
  !
  access-list 22 allow 10.16.20.0
  access-list 22 permit 10.16.20.0 0.0.0.255
  Note access-list 101 * ACL SHEEP *.
  access-list 101 deny ip 10.0.0.0 0.0.0.255 10.16.20.0 0.0.0.255
  access-list 101 permit ip 10.0.0.0 0.0.0.255 any
  access-list 115 permit ip 10.0.0.0 0.0.0.255 192.168.1.0 0.0.0.255
  !
  !
  !
  control plan
  !
  !
  !
  MGCP behavior considered range tgcp only
  MGCP comedia-role behavior no
  disable the behavior MGCP comedia-check-media-src
  disable the behavior of MGCP comedia-sdp-force
  !
  profile MGCP default
  !
  !
  !
  !
  !
  Line con 0
  no activation of the modem
  line to 0
  line vty 0 4
  exec-timeout 0 0
  preferred transport ssh
  transport input telnet ssh
  !
  Scheduler allocate 20000 1000
  !
  end

  OFFICE B

  OFFICE-B-DG host name
  !
  boot-start-marker
  boot-end-marker
  !
  AQM-registry-fnf

  !
  AAA new-model
  !
  !
  AAA authentication login default local
  AAA authentication login xauthlist local
  AAA authorization exec default local
  AAA authorization exec vty group xauthlocal
  AAA authorization exec defaultlocal group bdbusers
  AAA authorization groupauthor LAN
  !
  !
  !
  !
  !
  AAA - the id of the joint session
  !
  Crypto pki trustpoint TP-self-signed-1514396900
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 1514396900
  revocation checking no
  rsakeypair TP-self-signed-1514396900
  !
  !
  TP-self-signed-1514396900 crypto pki certificate chain
  certificate self-signed 01
    
  quit smoking

  !
  !
  8.8.8.8 IP name-server
  no ip cef
  No ipv6 cef
  !
  !
  !
  !
  !
  Authenticated MultiLink bundle-name Panel
  !
  !
  !
  !
  !
  !
  !
  license udi pid C887VAM-K9 sn FCZ191362Q7
  !
  !

  !
  !
  !
  !
  VDSL controller 0
  !
  property intellectual ssh rsa SSH key pair name
  !
  !
  crypto ISAKMP policy 1
  md5 hash
  preshared authentication
  !
  crypto ISAKMP policy 3
  BA 3des
  preshared authentication
  Group 2
  !
  crypto ISAKMP policy 20
  md5 hash
  preshared authentication
  encryption XXXX isakmp key address IP-OFFICE-A

  !
  ISAKMP crypto client configuration group remoteusers
  key xxxx
  DNS 192.168.1.10
  WINS 192.168.1.10
  rete.loc field
  pool ippool
  ACL 101
  !
  !
  Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
  tunnel mode
  Crypto ipsec transform-set esp - esp-md5-hmac xauathtransform
  tunnel mode
  Crypto ipsec transform-set esp - esp-md5-hmac rtpset
  tunnel mode
  !
  !
  !
  Crypto-map dynamic dynmap 10
  Set transform-set RIGHT
  Crypto-map dynamic dynmap 20
  Set transform-set RIGHT
  !
  !
  map clientmap client to authenticate crypto list userathen
  card crypto clientmap isakmp authorization list groupauthor
  client configuration address map clientmap crypto answer
  10 ipsec-isakmp crypto map clientmap Dynamics dynmap
  20 ipsec-isakmp crypto map clientmap
  peer IP-OFFICE-A value
  Set transform-set RIGHT
  match address 115
  !
  !
  !
  !
  !
  !
  !
  interface Loopback1
  no ip address
  !
  ATM0 interface
  no ip address
  No atm ilmi-keepalive
  PVC 8/35
  aal5mux encapsulation ppp Dialer
  Dialer pool-member 1
  !
  !
  interface Ethernet0
  no ip address
  Shutdown
  !
  interface FastEthernet0
  switchport access vlan 30
  no ip address
  !
  interface FastEthernet1
  switchport access vlan 30
  no ip address
  !
  interface FastEthernet2
  switchport access vlan 20
  no ip address
  !
  interface FastEthernet3
  switchport access vlan 10
  no ip address
  !
  interface Vlan1
  no ip address
  Shutdown
  !
  Vlan30 interface
  IP 192.168.1.254 255.255.255.0
  IP nat inside
  IP virtual-reassembly in
  !
  interface Dialer0
  the negotiated IP address
  NAT outside IP
  IP virtual-reassembly in
  encapsulation ppp
  Dialer pool 1
  Authentication callin PPP chap Protocol
  PPP pap sent-name to user
  clientmap card crypto
  !
  router RIP
  version 2
  10.0.0.0 network
  network 192.168.1.0
  !
  IP local pool ippool 10.16.20.201 10.16.20.250
  IP forward-Protocol ND
  no ip address of the http server
  no ip http secure server
  !
  !
  the IP nat inside source 1 interface Dialer0 overload list
  overload of IP nat inside source list 101 interface Dialer0
  IP nat inside source static tcp 192.168.1.100 5060 interface Dialer0 5060
  IP nat inside source static tcp 192.168.1.100 5061 interface Dialer0 5061
  IP nat inside source static tcp 192.168.1.100 5062 interface Dialer0 5062
  IP nat inside source static tcp 192.168.1.100 5063 5063 Dialer0 interface
  IP nat inside source static tcp 192.168.1.100 5064 interface Dialer0 5064
  IP nat inside source static udp 192.168.1.100 5060 interface Dialer0 5060
  IP nat inside source static udp 192.168.1.100 5061 interface Dialer0 5061
  IP nat inside source static udp 192.168.1.100 5062 interface Dialer0 5062
  IP nat inside source static udp 192.168.1.100 5063 5063 Dialer0 interface
  IP nat inside source static udp 192.168.1.100 5064 interface Dialer0 5064
  IP nat inside source static tcp 192.168.1.100 3541 interface Dialer0 3541
  IP nat inside source static udp 192.168.1.100 3541 interface Dialer0 3541
  IP route 0.0.0.0 0.0.0.0 Dialer0
  !
  !
  sheep allowed 10 route map
  corresponds to the IP 150 101
  !
  access-list 22 allow 10.16.20.0
  access-list 22 permit 10.16.20.0 0.0.0.255
  access list 101 deny ip 192.168.1.0 0.0.0.255 10.16.20.0 0.0.0.255
  ACCESS-list 101 permit ip 192.168.1.0 0.0.0.255 any
  access-list 115 permit ip 192.168.1.0 0.0.0.255 10.0.0.0 0.0.0.255
  !
  !
  !
  control plan
  !
  !
  !
  MGCP behavior considered range tgcp only
  MGCP comedia-role behavior no
  disable the behavior MGCP comedia-check-media-src
  disable the behavior of MGCP comedia-sdp-force
  !
  profile MGCP default
  !
  !
  !
  !
  !
  Line con 0
  no activation of the modem
  line to 0
  line vty 0 4
  exec-timeout 0 0
  password Password02
  preferred transport ssh
  transport input telnet ssh
  !
  Scheduler allocate 20000 1000
  !
  end

  Thanks in advance for any help :)

  the site at the other tunnel is mounted, but it does not pass traffic; What is the source and destination ip on the router that you are trying to ping the address

  whenever you try to open the traffic from router A to router B, you must to the source of the traffic.

  for ex,.

  Router A-->10.1.1.1--fa0/0

  Router B - 172.168.1.100

  source of ping 172.168.1.100 router # 10.1.1.1

  After doing the pings, send the output of the show counterpart of its crypto ipsec at both ends

• Internet Rete

  salve,,,,,,,,,,,,,,,,,,,,,,,,,,,,

  Salvo, mio problema dei fa computer internet wifi, TR takes rete e poi not lo trove piu rete, invece rete this sono sempre, e some volta if not conneta even

  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:
  

  Buongiorno

  If get di rates the lingua dal menu a discesa by send her tua domanda nella vostra scelta di lingua. Forum it cui hai posted by e by solo inglese. SE non riesci a find wishes of the lingua, he supporto delle options by Esil international further if can find following he link that sotto:

  Grazie

  http://support.Microsoft.com/common/international.aspx