Problems activating the reinstallation of mac - what to do?

Similar Questions

• a problem with the notes for mac

  Notes has locked up. Screen is unresponsive to the mouse or keyboard. In addition, menu notes is mostly gray. OS X version 10.9.5

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode

  Safe mode - Mavericks

• Wireless - problem with the integration of MAC printing

  Hello world.

  Just bought a Macbook pro and can't seem to recognize my printer.

  Network devices:

  -Router Belkin WLAN

  -MFP HP Laserjet CM1312 - with HP 2101nw Wireless G (printing and scanning even works fine without thread!)

  -Acer laptop with XP Home (used to implement the 2101 wireless)

  -Acer Netbook with XP Home (later added to the network, no problem with printing, Setup a 5 min)

  Antivirus software: Avira Premium Security Suite on both XP

  Encryption WPA - PSK, mac filtering.

  The Macbook connect to internet, but nothing happens when I try to print. I tried to stop the argument that Windows is sometimes initially. Frustrating experience with the Mac to date.

  Can anyone help?

  We have found the solution:

  The HP 2101 nw G wireless driver must be installed (we had to try the installation twice).

  There is no 10.6 driver available on the HP site, but we tried the driver available however and to operate. Printing works perfectly well, we have simply not tried scanning so far (I think that it won't work), but the first step is done.

  Would be nice if HP could not work on the drivers updated to 10.6.

• problem activating the IP SLA call path

  Hi all

  PacketTrap seems to have problems for some devices (2960 switches) Cisco IP SLA. So what I've done in the past is configured on the switch and then just ALS 'path call IP SLA enabled' but now I find when I try to do that, I can get settings, then when I try to save it gives an error "cannot save the settings because of the"NoSuchName «»

  How can I use reliable PT set up monitoring SLA?

  Switch answering machine seems to work ok, but it's only half of what it takes.

  Thank you

  In fact I found the problem. ALS tools aren't necessary, just configure the SLA manually and make sure that the you have the SLA monitor enabled on politics and you're good to go.

• Problems activating the Pp CC 2015 on new computer

  I bought a new pc and downloaded first pro compared to the creative clouds. No problem signing in. using Adobe ID.

  New pc a faster NVIDIA graphics card.

  Whenever I opened the first pro, it loads ok but just before the Welcome screen, I get «First ro CC 2015 trial ‑‑ You can try the products for 0 days etc.»

  I press the button "buy this software." I get "Sign in required" showing me the correct ID of Adobe.

  I press the button 'sign' in and get thanks - «press continue»

  The app comes up, but I noticed different things. For example, don't create a new sequence to get fewer preset for example options no AVCHD.

  What should I do to get the application to recognize me as a current CC member?

  Thank you

  Paul

  If you are missing the presets:

  Missing features and sequence Presets - sequence could not be opened

• Problem with the reinstallation of Windows XP Pro

  A few days ago my Windows XP Pro showed an error at startup, which has declared "activation failed". I have been using the computer for several years. I installed my XP disk to recover the system. After several hours (overnight), he continued to show "Please wait".

  I decided to reinstall windows, it showed that I loose all my data, so I copied them to another drive, and then run to install windows in a different directory (C:\Windows2). I also used a newspaper different name in order to keep my files intact.

  Then, I decided to install windows on "C:\windows" with another in log.

  I now have a selection of dual-boot. One for windows and one for windows2 (show 'Windows XP Pro').

  My question is how I can remove the dual boot. I also need to eliminate some of the user data files.

  Then use msconfig to remove the entry from the start for windows2 installation menu and then delete the folder for windows2

• Problem with the reinstallation of Windows XP Edition family, but the product key does not work

  I want to reinstall windows xp family, but why my legal product key does not work? IM using it in a computer.

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  ===================================================================

  Blank page to activate Windows in the wizard of Windows Product Activation
  http://support.Microsoft.com/kb/314935

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: http://www.pagestart.com

• Ligthroom CC trial has expired and I decided to keep my old LR5 (problems with the reinstallation of the software)

  I did install the trial of Lightroom CC and now the trial has expired and I decided to stay with my LR5 but I can't access the develop module to work on my photos. What should do?

  I reinstalled my software LR5 as has been recommended by Adobe, but nothing changes on my computer. When I opened my LR it shows version 5.7 is not the original 5.2 I had and my module help us turn off. Please I need help ASAP!

  
  

  Thank you

  Maggie
  

  If the develop module is disabled, you have installed the version creative cloud. It must be removed. You can install the 5.7.1 update this link: updates

  Lightroom 5.7.1 was the last update for Lightroom 5. You might as well go ahead and install rather than a previous update.

• Download sierra button not active in app store Mac OS

  I tried to download MacOS Sierra 5 times. The first 3 times the download never went to install. I'm guessing that the download was not complete. All downloads were running almost 2 hours or more. After the 4th download, the computer was shutdown. When I started, I had a circle of download and reel. I actually leave can work from one day to the next and it was never finished. No, when I try to download, the download button is gray. I have connected the MacBook Pro directly to the router with the ether net cable. The button calmed grayed. The MacBook Pro is 2012 8 GB memory and 550 GB of storage. It is currently running OSX 10.11.6. Does anyone have an idea of what's going on?

  Hi barneyfrommount dora!

  I see that you are having problems with the update to Mac OS Sierra.  I know it's important to be able to update, and I'm happy to help you.  Please start the Mac in safe mode, and then try to update while the Mac is in safe mode.

  Try safe mode if your Mac does not end commissioning

  Thank you for using communities of Apple Support.

  See you soon!

• Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  What Mac? (details)

• Problem activation of CSS styles

  Hello
  I'm just getting started with ice and so far it seems that this will be a nice way to let some customers to edit their own content without "breaking" the design. However, I'm running a problem activating the CSS styles.
  
  My site is a php site and I use includes for the top of the page, stylesheet, etc. on each page. Dreamweaver, think, therefore, there is no style sheet linked to the page because the link is contained in understand it.
  
  Is it possible to implement the styles in a style sheet included in an include file is recognized by the ice?
  
  Ellie

  I figured out what to do...

  The first thing was to put the link in the header of the include file and add:

  Ice: class = "" * "for the link CSS settings."

  The second thing I did was to change the definition of the styles of

  Element.Class {style} .class {style}

  I'm guessing that the ice cannot see that general classes and not the classes that apply to specific items. An example is that in my original CSS file, I had

  IMG.hilight_img {border :...}

  When I chose the IMG I wanted to apply the style to in ice, without styles available appears. However when I changed my CSS definition:

  .hilight_img {border :...}

  Then was able to apply the style to my image in Ice I noted, however, that the ICE has not added the class "hilight_img" in the IMG tag. Instead, it creates a span around the image and applied to that class. Not ideal, but the result has worked.

  Ellie

• Problems with the display of the 3D graph

  Hello world

  I use a 3-d chart in one of my screws and I have problems with the display. See what it shows by yourself:

  

  So, as you can see, the chart does not correctly display the data. But one thing I know, is that the data are sent correctly, because when I copy the LabVIEW graphic and paste it into paint, what I see, this is the graph displayed correctly:

  

  Anyone know what may cause the problem? I also have a similar problem with a waterfall in 3D.

  You can always download the updates of ni.com so.

  I also went through a documentation on known LV 2011 issues. I was able to find something interesting onthis page:

  3D image controls can display transparently or LabVIEW crash on some graphics cards

  The 3D Picture Control is based on an OpenSceneGraph that uses OpenGL. It was noted several reports of the 3D image control crashing LabVIEW. In almost all cases, it was an Intel graphics integrated into question. This accident is due to a mismatch of the graphic material. Note: most 3-d charts use the 3D picture control

  Some possible workarounds are:

  • Update the video driver
  • Enable/disable hardware acceleration
  • Enable Aero in Windows 7
  • Disable Aero in Windows 7

  I might try these workaround solutions and see if any of them work for you.

• Problem with the disk free space.

  I use the power of fire 7100 (the 5.3.0.3 Version of FireSight 5.4.1.7 sensor Version). I have political problems that apply to the device. And is unable to update sensor for the newest version. Cisco support community help me! Thank you! They and I think that this problem can be in the use of the disk.

  What I oh sensor:

  Size of filesystem used Avail use % mounted on
  / dev/sda5 2.9 G 562 M 2.2 G 21%.
  / dev/sda1 99M 37 M 58M 39% / Boot
  / dev/sda7 67 67 G 0 100% but
  No 1.9 G 136 K 1.9 G 1% / dev/shm

  May be the problem with the records of Volume.What I could check and delete? Thank you!

  Hello team,

  * Could you please check the following points: -.

  CD/var/tmp /.

  du-sh *.

  You can clear the/var/tmp/en using the following. Files under/var/tmp temporary files are. :-

  rm - rf *.

  It is a known bug where the but gets completely due to Apply_ files *.

  * Also check the following points: -.

  CD/var/sf/updates

  Remove the old patches if there are.

  * Check the following backup folder and the folder of detection engine too.

  CD/var/sf/upgrade_backup

  du-sh *.

  CD/var/sf/detection_engines

  du-sh *.

  Rate if this helps you.

  Concerning

  Jetsy

• Yahoo mail and yahoo Web sites not be loading not on safari April 10, 2916. How to get around this problem? Œuvres of chrome! What is the future of mac?

  Yahoo mail and yahoo Web sites not to load not on safari as of April 10, 2016. How to get around this problem? Œuvres of chrome! What is the future of mac?

  Could be a cookie problem...

  In your Safari menu bar, click Safari > Preferences then select the Privacy tab, then click on: Remove all data from the Web site

  If this does not help, you can have this Yahoo pages preventing to open a Safari extension or third party plugin installed.

  In the Safari menu, click Safari > Preferences , and select the tab ' Extensions '. If there are installed extensions, one at a time uninstall and exit then restart Safari to test.

  If it is not a question of extensions, try troubleshooting third-party plug-ins.

  Back to Safari > Preferences. This time select the tab Security Deselect: plug-ins Allow. Quit and restart Safari to test.

  If it makes a difference, the instructions of troubleshooting plugins here.

• I bought LR6 and during installation, he repeats to me "we are unable to validate this serial number" but I am connected and my serial number indicates in my account and the email that I received... What's the problem? (working on a < Mac)

  I bought LR6 and during installation, he repeats to me "we are unable to validate this serial number" but I am connected and my serial number indicates in my account and the email that I received... What's the problem? (working on a < Mac)

  Hello

  Please see the below help document to fix the error:

  https://helpx.Adobe.com/Creative-Suite/KB/unable-validate-serial-number-CCM.html

  Kind regards

  Sheena