Problems adding seat with VIP address

Similar Questions

• Problem adding attachment with pragmatism and citing the e-mail application

  
  

  MSohm said that the MDS Simulator has limited capacity for attachment, I can't tell if that is the problem, but it seems likely. You should look for a real device confirm. not everything can be developed with a simulator.

• TAF does not work. VIP address problem?

  Hello
  
  My JOB does not work. My configuration:
  
  Node 1:

  [grid@nodedc1 admin]$ lsnrctl status
  
  LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 20-MAR-2013 14:08:20
  
  Copyright (c) 1991, 2011, Oracle.  All rights reserved.
  
  Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
  STATUS of the LISTENER
  ------------------------
  Alias                     LISTENER
  Version                   TNSLSNR for Linux: Version 11.2.0.3.0 - Production
  Start Date                20-MAR-2013 14:07:52
  Uptime                    0 days 0 hr. 0 min. 27 sec
  Trace Level               off
  Security                  ON: Local OS Authentication
  SNMP                      OFF
  Listener Parameter File   /opt/11.2.0/grid/network/admin/listener.ora
  Listener Log File         /opt/app/oracle/diag/tnslsnr/nodedc1/listener/alert/log.xml
  Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.22.111)(PORT=1521)))
  Services Summary...
  Service "+ASM" has 1 instance(s).
    Instance "+ASM1", status READY, has 1 handler(s) for this service...
  Service "xxx" has 1 instance(s).
    Instance "xxx_1", status READY, has 1 handler(s) for this service...
  Service "xxxXDB" has 1 instance(s).
    Instance "xxx_1", status READY, has 1 handler(s) for this service...
  The command completed successfully

  Node 2:
  

  [grid@nodedc2 admin]$ lsnrctl status
  
  LSNRCTL for Linux: Version 11.2.0.3.0 - Production on 20-MAR-2013 14:12:48
  
  Copyright (c) 1991, 2011, Oracle.  All rights reserved.
  
  Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
  STATUS of the LISTENER
  ------------------------
  Alias                     LISTENER
  Version                   TNSLSNR for Linux: Version 11.2.0.3.0 - Production
  Start Date                20-MAR-2013 14:04:29
  Uptime                    0 days 0 hr. 8 min. 18 sec
  Trace Level               off
  Security                  ON: Local OS Authentication
  SNMP                      OFF
  Listener Parameter File   /opt/11.2.0/grid/network/admin/listener.ora
  Listener Log File         /opt/app/oracle/diag/tnslsnr/nodedc2/listener/alert/log.xml
  Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.22.112)(PORT=1521)))
  Services Summary...
  Service "+ASM" has 1 instance(s).
    Instance "+ASM2", status READY, has 1 handler(s) for this service...
  Service "xxx" has 1 instance(s).
    Instance "xxx_2", status READY, has 1 handler(s) for this service...
  Service "xxxXDB" has 1 instance(s).
    Instance "xxx_2", status READY, has 1 handler(s) for this service...
  The command completed successfully

  My listener.ora:

  LISTENER_SCAN3=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN3))))                # line added by Agent
  LISTENER_SCAN2=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN2))))                # line added by Agent
  LISTENER=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER))))            # line added by Agent
  LISTENER_SCAN1=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER_SCAN1))))                # line added by Agent
  ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1=ON                # line added by Agent
  ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER=ON              # line added by Agent
  ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN2=ON                # line added by Agent
  ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN3=ON  

  I think the problem is with my VIP addresses because one of the endpoints is 127.0.0.1. I configured the DNS server. Nslookup works very well, solves the principal names.
  Configuration of the DNS:

  nodedc1            IN A    192.168.22.18
  nodedc2            IN A    192.168.22.37
  nodedc1-priv       IN A    192.168.11.11
  nodedc2-priv       IN A    192.168.11.12
  nodedc1-vip        IN A    192.168.22.111
  nodedc2-vip        IN A    192.168.22.112
  nodedc-scan        IN A    192.168.22.121
  nodedc-scan        IN A    192.168.22.122
  nodedc-scan        IN A    192.168.22.123

  Any idea?
  
  Thank you

  Scan of the listeners run out of your home GRID. Your environment is set to IM home?

• Have problems and questions with Time Capsule were addressed in any significant way. Reluctant to buy according to your comments.

  Have problems and questions with Time Capsule was dealt with in a meaningful way? Reluctant to buy according to your comments.

  Apple did not have any material changes to the time Capsule to nearly 3 years. The only change that has occurred in the last 18 months or so is a firmware update to address security issues.

• Hello! I use a PC and have problems loading my homepage of Muse. First of all, I made one with the address "nordensstjarnor" and updated several times without any problems. And once, I couldn't download on 'nordensstjarnor' any longer. Don't know why, s

  Hello! I use a PC and have problems loading my homepage of Muse. First of all, I made one with the address "nordensstjarnor" and updated several times without any problems. And once, I couldn't download on 'nordensstjarnor' any longer. Don't know why, when he got the address "nordensstjrnor". That me ok at first, but now I really need to give the first address once again, "nordensstjarnor". But when I try, the alternative of the site of ' publish on ' old isn't here. And if I try to create a new one, but with the old URL, the box turns red. What can I do?

  The reason why you cannot change nordensstjarnor.businesscatalyst.com is because a different Adobe ID is used for the publication of this site.

  t * [email protected] is used for the publication of nordensstjarnor.businesscatalyst.com

  t s. * [email protected] is used for the publication of nordensstjarnorindex.businesscatalyst.com

  You must make sure that Adobe ID is used in account publish, so that you can see a list of the websites published under this account. Go in Edition > Preferences > publish on Business Catalyst > publish with accounts

  You can pass the accounts for you can also make changes to the sites.

  Thank you

  Sanjit

• Network problems intermittent management with more than 1 works ESXi

  Hello

  I had problems since installation with our 2 x ESXi 5.5 nodes running on a Dell VRTX system.

  If I had to run 1 ESXi nodes on its own, it works perfectly, no problems what so ever, but as soon as I start the 2nd node they network for the management network connectivity problems.  However any virtual machine that you are running on them have no problem at all.

  The easiest way for me to check it comes to ping the management network and it will be on one of the nodes timeout, then it will randomly and knitting on this node but timeout on the other, they will never return a ping at the same time.

  
  If anyone has experienced this before? I fight to see if there is a problem with the installation on the ESXi hosts, the network Dell VRTX or our NetGear switch.

  I tried a lot of solutions and been through the different pages of VMware KB but can't seem to find something that suits him.

  The network Dell 8 physical ports are all in one LAG with 2 nodes added, I tried the distinct lag, but that made no difference, I am focusing now on if it is a parameter of VMware to see where that gets me.

  That's how the two nodes are configured.

  

  Solved!

  Finally, I spotted the problem, and VMware technical support fixed it for me.

  The MAC address of each management network was the same!, for some reason, the host of the 2nd got the MAC address of a NIC to host the premiere, don't know how its possible but VMware support restored all of the network settings from scratch and it picked up the correct MAC and works.

  Thank you all for your suggestions.

• How can I get the address book to always open with personal addresses. It opens with "all address books.

  When addressing and e-mail, addresses always open with "all the address book. This book contains many addresses which are not intended for daily use for most of the mail I write or pass. I want to always open with "Personal address book" to shorten the research process. I have not had any problems with this before the last update.

  Firefox does not have email or have an address book, it is strictly a web browser.

  If you use Firefox to access your e-mail, you use "webmail". You must seek assistance from your service provider or a forum for this service.

  If your problem is with Mozilla Thunderbird, let know us and we can move this thread to the queue of Thunderbird. This issue is currently in the queue of Firefox to get answers.

• When I open a page in firefox there is nothing on it just a black page with no address bar or whatever it is

  When I open a page in firefox there is nothing on it just a black page with no address bar or whatever it is

  Currently in version 33, Firefox has implemented a new faster way to loading Web pages. This new feature is called OMTC. However, there are still tweaks to the Mozilla developers make this.

  There is a known issue that Mozilla works very hard to fix: If you have black pages on some sites, here's what you can do to avoid the problem in the meantime:

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  To disable hardware acceleration

  • Click the menu button

    

    then select Options.

  • In the window of Firefox Options (or preferences), click on the Advanced tab, and then select general.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.

  Now, quit Firefox, wait a few seconds and start normally.

  Please let us know if this solves the problem. Engineering is also collecting more information on the question would require that you fill out this survey

  Thank you!

• Hello! Can someone help me with the address of repair service for Palm TX?

  Hello! Can someone help me with the address of repair service for Palm TX?

  Good luck and please, let us know here how it works for you.  We like to know current resources, which can help to solve the problems of people with these older devices.

• Anyone know when will fixed the problem of material with the "IPAD PRO"? The question that keeps it from starting after the load.

  Anyone know when will fixed the problem of material with the "IPAD PRO"? The question that keeps it from starting after the load.

  According to Apple, it has been addressed in the latest update of the iOS, iOS 9.2.

• emails are sent to my contacts with my address email but iam not not sending them.

  emails are sent to my contacts with my address email but iam not not sending them.

  Hello

  If someone is Spoofing emails that appear to come from you then they probably never
  had access to your e-mail account. Instead, they have either a copy of your contacts
  list or just an email from you or one of you where you were one of the recipients. Those
  could be gleaned either your computer, the computer of a friend, or hacking
  any site or intercept an email on your behalf or to you (you may not be the main)
  (beneficiary).

  Once they have this information there is nothing you can do to avoid that they don't
  send usurped messages. Warn your friends that is happening and they
  can be entitled to install rules such as parodies are treated as SPAM or JUNK
  mail.

  I've even seen usurped by email that appears to be from a valid user name however
  This name doesn't have an e-mail account on the mail system used in parody.
  As SpiritX - AT - realmail.com may be a valid account, however, parody used
  SpiritX - AT - wrongmail.com. The latter could still be considered an email address valid
  SpiritX if it was allowed through JUNK and JUNK e-mail filtering. (The - AT - has been used
  instead of so that those addresses would not be filtered by auto responses.
  as if by magic.)

  ============================================================

  Proceed to a very thorough check for malware and then change your password by e-mail.

  The reason why you want to do this is to make sure no more hacking your computer is
  still in effect (if it has been hacked). You have changed the password once but I would
  Change it again after these checks.

  It is possible for a person to send the email that 'seems' to be of your
  account but that is not really - called "Spoofing." That means its 'Possible' emails
  were not really you, although they may have your contact list. Have someone
  who receives the e-mails to check the header to see where he is actually sent by and
  NOT only the answer to the address.

  How to read the message headers
  http://www.emailaddressmanager.com/tips/header.html

  What Email Headers can tell you about the origin of Spam
  http://email.about.com/cs/spamgeneral/a/spam_headers.htm

  E-mail spoofing
  http://en.Wikipedia.org/wiki/E-mail_spoofing

  E-mail spoofing and Phishing
  http://www.mailsbroadcast.com/email.broadcast.FAQ/46.email.spoofing.htm

  Understanding E-mail Spoofing
  http://www.windowsecurity.com/articles/email-spoofing.html

  Fraudulent emails (false)
  http://pages.eBay.com/education/spooftutorial/

  Google search - email Spoofing
  http://www.Google.com/search?hl=en&EI=FB1nS9DiNo7CsQPNhKGdAw&SA=X&Oi=spell&resnum=0&CT=result&CD=1&ved=0CAgQBSgA&q=email+spoofing&spell=1

  =============================================

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  RUN - type in the box-

  sfc/scannow

  Then run checkdisk (chkdsk).

  RUN - type in the box-

  Chkdsk /f /r

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• My Windows Live Hotmail account has been hacked and they have added an additional email address to recover passwords for security.

  How can I delete an email without sending a confirmation to this account?  My hotmail account has been hacked and they have added an additional email address to recover passwords for security.  To remove the address, the only apparent is to send a confirmation email to the address I want to delete.  It is counterproductive.  I have a password, but if they can obtain the information via another email address, my account is never going to be safe.   I got this address for a long time and do not want to lose.  However, he begins to feel that my only option is to go with another provider.

  Thank you

  original title: remove email address

  After all the Hotmail issues in the appropriate forum found here:
  http://windowslivehelp.com/

• MAC filter list giving problems on EA6500 with bridge

  Hello

  installed a router EA6500 and WUMC710 bridge.

  I tried using the MAC filter option and included all my wireless devices, including the WUMC710 bridges.  The MAC filter works great for wireless computers and smart phones.

  It also works for bridges, the bridge is accessible from the network and can be opened for installation.  However, all devices connected to the bridge are considered to be wireless devices.  No, problem, can live with that.  For example, included the MAC addresses of these devices (Media Player, desktop,...).

  Even when I've included these devices, attached to bridges, they cannot access the network or accessed via the network.  For some reason, the router seems to make a difference between wireless devices, directly attached to the router and devices are connected to the WUMC710 bridge.

  When I do not use the MAC filter, the devices work properly.

  With my old router / bridge configuration, I never knew that the devices connected to the bridge where the as wireless devices.

  Someone at - it experience with this problem?  Is this a problem with the gateway or router?

  MAC addresses that you enter for the devices connected on the WUMC710 should be the LAN mac addresses. You must also include the mac address of the WUMC710 instead of just the mac address of LAN wireless. It is the way in which the bridge is designed to work if you have the mac address filtering is enabled in the router. Got this info from this link: http://homecommunity.cisco.com/t5/Access-Points/WUMC710-MAC-Address-issues-when-using-MAC-Filtering/....

• BlackBerry smartphones "BOLD" problem Calendar Sync with PocketMac and Desktop Manager 4.6

  # The RIM case: 5499753

  I have 4 email addresses attached to my BB "BOLD".
  When I go into Options / Advanced / Default Services / calendar, I have 4 entries (all e-mail addresses).

  If I go to calendar, Options, there are all of an additional entry in "Default device" 4 as well as e-mail addresses.

  Regarding the calendar by address entries, it is divided as follows:

  Email 1) 1
  E-mail 2) 0
  Email 3) 50
  Default device) 38
  Email 5) 0

  When I try to synchronize, the desktop software sees only the #3 email that is my rogers.blackberry.net with 50 entries and sync in Outlook, resulting in a loss of events in my Outlook on my desktop. All events are still in bold.

  I can not also move all the elements of the default device and assign it to the category E-mail no. 3, which reduced from 38 to 37 and from 50 to 51.
  Once you have received an entry on the device, you cannot change the e-mail addresses associated with the event.

  Removing the servicebooks (CICAL all) the default device entry has the combined entries.

  Once the service books are sent to the device, it then splits them again.

  This seems to be a problem with the Blackberry "BOLD" operating system, or a problem of service book (since when CICAL service books are deleted, calendar entries all combine for peripheral list by default.)

  This also happens on WinXP with 4.6 DM, is not platform specific.

  OS: 4.6.0.125 & 4.6.0.134 tempted.  Both have the same result.

  Just got off the phone with RIM support.

  Here is the procedure:

  All backup data

  Do a thorough cleaning (Options, Security Options, General settings)

  Content compression set to disabled

  Save the settings

  Return to the General settings, Blackberry press button and wipe Handheld.

  Load DM and go to the backup/restore, advanced.

  Load your backup file.

  Restore only the peripheral calendar (drag the calendar on the right)

  You should be able to see in the calendar options, device default calendar with all the entries.

  Synchronize in Outlook.

  At this point, you should have all your entries in Outlook.

  Hard Reset (press left ALT + SHIFT RIGHT + DELETE and hold the button until it restarts the device)

  Go to the website of your provider BIS and remove all the entries that you want as the default calendar.

  Set the date and time on the device.

  Turn on the wireless Radio

  Return Service directories from the BIS website.

  Go to Options, advanced, default Services.

  Set default CICAL (this should be the one you really want to like the calendar by default and the only one on the device).

  Set the default CMIME if necessary.

  Add the e-mail addresses that you deleted on the BIS website.

  Return service directories.

  You should have all your e-mail addresses and no. peripheral in your calendar, by default.

  All entries in the calendar should be associated with the address you chose as the default value.

  Resync using DM.

  Note - PocketMac 4.1.25 is not supported with the "BOLD".

  This creates blockages and major sync issues.

  I have run this procedure from a computer running Windows XP with Office 2003.

• Problem adding all-in-one 7210 as a printer 'network '.

  I have a succesfully connected 7210 via the port USB of PC at home connected to the router & 'main' wireless (via ethernet cable).

  I also added successfully (with ease!) to Vista laptop for my daughter and she can print wireless very well.

  However, now try to install on my XP laptop that already has the driver installed (uses 6210 all-in-one on my place of work via USB) through "add a printer".

  Select the printer network OR local printer? What options to choose then? How can I know my printer name (or IP address) and port name?

  Thanks for the help in advance!

  Try to do this:

  1 printer a network. configurtaion page  You can click on the SETUP (wrench) on your printer. Then search NETWORK and press OK. Search for VIEW the NETWORK SETTINGS, then press OK. Find the NETWORK SETUP PAGE and press OK. It will display the page of network configuration for you.

  2. search for the IP ADDRESS on the network configuration page.

  3. on your computer, choose LOCAL PRINTER and uncheck the box that says automatically detect printer attached to this computer, and then click Next.

  4. Select ADD A NEW PORT and chose TCP/IP.

  5. type the IP ADDRESS of the printer and follow the rest of the on-screen instructions.

  Let me know if this helps.