Problem adding all-in-one 7210 as a printer 'network '.

Similar Questions

• Printer all in one HP PSC 2175v prints the page number and the title of the document

  Printer all in one HP PSC 2175v prints the page number and the title of the document.

  This is the default value?  Can I disable this?  I would prefer to print only the document, without page numbers and the title.

  I was printing of either Wordpad specifications, using Windows XP.

  Using the front panel of the printer, I loaded the defaults of the printer, and that fixed the problem.

  Thank you

• HP 7210 all in one - will not be printed on the fast project configuration

  For the last two weeks, my 7210 HP all-in-one has decided that he does not want to print on quick project more.  I have the default settings of the printer on quick project, and I even went and edited individual documents to ensure that they are on the quick project, but it still prints on quality.  I do a ton of printing on a daily basis, and that is to kill my ink, not to mention how long it takes.  My OS is Windows 7, 64-bit.

  Hey @kmh1883,

  Thanks for getting back to me on this subject "fast draft" with your HP Officejet 7210 all-in - One Printer. Even if printing HP and doctor Scan found no problem, it seems that you may have a driver conflict. I would like to try another driver at the moment to see if this clears up your printing problems.

  How to add another driver:

  1. Click on the Start menu
  2. Select the devices and printers
  3. In the devices and printers folder right click on your HP Officejet 7210 and left-click on properties of the printer
  4. Left click on the Advanced tab
  5. Left-click on new driver
  6. When the new driver window just press 'Next' until you see a list of manufacturers on the left and a list of Printers on the right.
  7. Select HP as the manufacturer on the left
  8. DeskJet 9800 select the printer on the right. If Deskjet 9800 is only select "Windows Update" at the bottom left and once the update has been completed, you will be able to select Deskjet 9800.
  9. After selecting Deskjet 9800 hit next complete the new driver Wizard
  10. Under the printer properties window, select 'Apply' but do not hit OK
  11. Select the general tab
  12. Rename your printer in HP Officejet 7210
  13. Click OK
  14. Finally, right click on your HP Officejet 7210 one more time and left-click on Printing Preferences
  15. Left click on the paper/quality tab
  16. Left click on the drop down menu 'Normal' for quality printing at the bottom right and change its project of Fast
  17. Press apply and OK

  Test print from the print driver Deskjet 9800 replacing to check if the setting "Fast Draft" remains.

  Please let me know if this solved your problem. Good luck!

• HP all-in-one 4620: uninstalled 4620 printer but getting 'problem starting HPStatusBl.dll' notice at startup.

  I uninstalled the printer software HP 4620 on my HP computer running Windows 8.1. When you start the computer, I get the message "error loading c:\programfiles\hp\hpofficejet4620series\bin\hpstatusbl.dll" window message

  Hey @SteveJG,

  I would like to help you today to solve the 'problem starting HPStatusBL.dll' message that you get on your computer Windows 8.1. I understand that the uninstall your HP Officejet 4620 e-all-in-one printer has not made a difference. Just so you know, this error message is for a 'service' that Windows is trying to start it's related to the HP device. I just go and delete this file manually. Please follow the steps below.

  1. Open the Start screen by selecting the Windows button in the bottom left of your computer screen, or by clicking the Windows button in the bottom left of the keyboard, to the right of the Ctrl key.
  2. When the splash screen opens, type computer (can show that This PC)
  3. Click on the computer (or PC) to start the window
  4. When the computer window opens, click on the Drive C
  5. Click on users
  6. Click on your user name
  7. Select AppData
  8. Select roaming
  9. Select Microsoft
  10. Select Windows
  11. Select the Start Menu
  12. Select programs
  13. Finally, click Start
  14. You will see a shortcut here to monitor alerts - ink HP xxxxx. Right click on this and 'Remove' it.

  Once the file monitor ink Alters has been removed, restart your computer to verify that the problem has been resolved.

  Please reply to this message with the result of your troubleshooting. Good luck!

• HP 3050 j610: wireless printing problem withhp3050j610a all-in-one.

  I have been scanning and printing documents regularly. one day during the analysis of a doc a message flashed on the computer screen that there was a communication problem between the computer and all in a printer.it persists over and over again.

  He had no problem with impression then.

  as advised by the media, I downloaded a link . http://169.254.152.74 and saved as a favorite and he used every time I had to analyze.

  yesterday it stopped opening.

  Contact support who advised me to support responsible link.down to print and scan doctor and solved the problem of scanning and it turned into a printing problem. print a test page, it does not print a document.

  After encountering conflict driver down load of troubleshooting, I was informed to uninstall the drivers and the use of the CD that came with the product.i did. without success. scanning is ok.

  However, questions have been confirmed to have been solved by the doctor tool but is not printing. not even the test page. There is no abras to low ink.

  I double clicked on the printer icon when and as advised by the tools, without result.

  I use a laptop sony vaio e series with win7 os.

  Please help me solve the problem.

  Hello @casia15 and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you have problems printing.  I would try to help!

  First of all, I would say uninstalling the software of the printer.

  Once it is uninstalled, I suggest you put your system in clean boot mode in the configuration of Microsoft.  You can do this by following this document: How to perform a clean boot in Windows.

  Once the computer is in clean boot mode, I would suggest to reinstall the HP printer install wizard for Windows.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• OfficeJet all in one 7210 do not fax

  OfficeJet 7210 all-in-one has ceased to be able to send or receive faxes.

  It rings when a call comes in, but will not take the fax.

  It connects but does not send a fax.

  The HP screen on the computer screen now only refers to the "printer, scanner, copier machine dropped the word"fax ".

  Worked fine until last week. We need for commercial purposes is very important to fix quickly! Any ideas will be greatly appreciated.

  Hello-

  What operating system do you use?

  Nothing has changed in the way that the phone line is connected?

  You have DSL Internet service?

  Have you checked the telephone line from the wall with a phone to ensure that you have the tone?

  Did you run the test from the printer fax? What does say?

• All-in-one HP Officejet 4620: printer problem

  Printer works fine with the office. When you try to print from laptop, black is faded or nonexistent. The colors are sometimes normal and sometimes faded. Are passed through the HP print and scan doctor including updated drivers and the problem still exists. It started when I replaced the black ink cartridge. HP used cartridge, not off the mark. Printer is set up with WiFi connection with a Belkin N600 router. Both computers are HP. Last screen with print and scan doctor says printer has some serious problems.

  Hi @freddie3,

  You know, even if the printer prints fine on a computer, I can't help but feel that the question has something to do with the printer itself. Let me explain; I wonder if when you print from a computer so the settings are grayscale, so 3 colors would be coming together to create a composite black.

  We will complete the recommended steps provided in the following document, this will help determine the root cause and can help to solve the printer prints a blank Page not printing black or color ink for HP Officejet 4610, 4620, Deskjet Ink Advantage 4610 and 4620 e - all-in - One Printer Series.

  If the problem persists, please let me know if the test pages have black ink on them or not. This will help me determine whether or not the problem is, in fact, the printer.

  Thanks, I look forward to hearing back on your part.

• OfficeJet 7310 all-in-one auto 2-sided printing problem

  Printer all-in-one Officejet 7310 with auto 2-sided does not even appear as a printing options in Windows 7. Is there a driver that will solve this problem?

  Babe7 salvation,

  Can you make a standalone copy from the glass?

  Can you make a standalone copy of the ADF?

  Follow the steps outlined in the document below.

  The ADF (ADF) captures no paper

• OfficeJet Pro 8610: HP OfficeJet Pro all-in-one 8610 do not print each attempt

  HP OfficeJet Pro all-in-One 8610 print intermittently

  11/09/2016

  This is a request for additional assistance from HP, Apple and AT & T Community Forums

  Machines and affected software:

  Printer HP OfficeJet Pro 8610 e - All - In - One.

  Serial number: CN4CNE3463

  Last updated: 06/09/16 (Version 5.0 (4.1.1 P, S; 5.17.1 F).)

  iMac 21.5 inch late 2009 (daily use)

  Serial number: W89415S5PC

  OS X El Capitan: Version 10.11.6

  MacBook Pro 13.5 inch late 2009 (occasional use)

  Serial number: W8942UW766D

  OS X El Capitan: Version 10.11.6

  MacBook Air 13.5 inches mid 2012 (daily use)

  Serial number: C02HX3ZADRVC

  OS X El Capitan: Version 10.11.6

  Wireless router: AT & T U-verse ARRIS NVG589

  more AT & T Wireless Access Point VEN501 device

  Wireless Router Range Extender: Linksys RE6500

  Multipoint unresolved printing problem:

  HP OfficeJet Pro 8610 had printed out successfully all the three above mentioned computers since the purchase of the 04/04/2015. End of August 2016 he started intermittently refusing to print wireless, sometimes do not connect wireless or holder from job to job.

  09/06/16 I posted the question on the Forum of community HP between 07/09/16 and 08/09/16 had dialogue on possible solutions. I followed the Commission received and interpreted it following recommended tasks - all without result:

  (1) sequential power off and cord power to the router Range Extender, OfficeJet 8610 Pro and iMac and removal after 60 seconds of powering the devices in the same order. Result: would not print.

  (2) off wireless to iMac. IMac connected to a printer via an Ethernet cable. Printer would not print.

  (3) tried to scan the printer for iMac's wireless: would not scan.

  (4) tried Scan via an Ethernet cable from the printer to iMac: Scan worked.

  (5) connecting iMac via an Ethernet cable to the router and printing system reset iMac to remove the printer and then added printer as directed by its name: HP OfficeJet Pro 8610 [455491]. The results have been mixed:

  (a) wireless to iMac to the router and Ethernet cable router for printer: test page printed.

  (b) the iMac to the router and wireless router for printer: test page will not print.

  08/09/16, having nothing specified by HP Community Forum, I contacted AT & T, the provider of my router and all my services (wireless, broadband, Internet, fixed phone) for the Support service.

  AT & T: recommended

  (1) make a new Setup wireless printing HP itself using my secure wireless network name and password, and then perform a reboot of the router. Between the two actions (new set-up and router reboot), the printer starts and print a previously submitted test page. To confirm that the printer was actually working, I turned off the printer, waited, he turned back and tried to print Test page: the page not print.

  (2) AT & T then told me to do a new manual of the printer setting. Just as I got Set Up on the screen of the printer, the printer prints the Test Page.

  AT & T told me that the printer should work fine now.

  Once I have shut down my system and restarted the 09/09/16, I found that I could not print anyway:

  Wireless to the router for printer

  Wireless to the router and Ethernet cable for printer

  Ethernet cable to the router and wireless to a printer

  Ethernet cable for printer

  Another experiment on 11/09/16 led to erratic printing depends on the original machine:

  1 iMac for HP printer: wireless printer for iMac gives not the Page of Test sent for printing, but a series of blank pages, followed by several pages of code and followed by more white pages. Code pages are all the same and then talking about the Cambria police (body).

  a. the first pages all State: %! PS-Adobe-3, 0% APL_DCS_Encodiong: UFT8% APLProducer: (Version 10.11.6 (Build 15 1)

  b. human beings second page with: 14 start/FontName dict / TJOLUV+ def Cambria

  Page 2 on three subsequent print reading attempts the same as above, except for a different set of letters before "+ Cambria". A UAXKPA, a JJCFBS, and the third is WOKHHG.

  2. yet, when I tried to print the Test Page of the MacBook Air and MacBook Pro wireless, printing is successful (i.e., the test page prints and do not print pages blank and coded.

  I'm sorely need a remedy to this overall situation.

  • What is originally intermittently, the HP printer?
  • What is originally a wireless printing and Ethernet to vary?
  • What is causing the iMac to print Virgin and code pages when the MacBook Air and MacBook Pro both print pages "regular"?
  • The question one demanding a new router?
  • DOE the question indicates the need to uninstall the printer and then perform a reinstall?
  • With all machine software updates could be software problems cross machine?

  Link to the firmware.

• 2510 all-in-one: 2510 used color printing

  Hello

  My printer has recently decided not to print in color.

  It copies in color

  New HP color cartridge

  Doctor says no problem

  Print Preview in Powerpoint slides & White; shows black Word displays the preview before print in color, but print in B & W

  When I go to print preview options it show a printer B & W only

  Hi @Mandolin456,

  Welcome to the Forums of HP Support!

  I see you are having problems printing in color for the all-in-one printer HP Deskjet 2510.  I will definitely do my best to help you.

  I understand that you are in color copy, printing and a doctor Scan is no problem.  I suggest that we take a glance in the printing preferences in the print to the printer settings.

  I would like to try the steps in this guide, HP Deskjet, Officejet and Photosmart printers and all-each change of printing in Windows settings 8

  Change the settings for printing a single print job

• HP Officejet 5740 e-All-In-One: multiple frustrations with printer e-all-in-one-hp officejet 5740.

  I have a HP Officejet 5740-e all-in-one that has all sorts of problems: periodically decides not to print documents from one of my laptops HP or Lenovo.  Do not accept ink cartridges HP Instant ink or HP ink cartridges purchased in a store.  Unable to get decent support for this HP product.  Is essentially a disposable item now?

  As far as I know that there is no user replaceable parts in these lower end home use printers. So if nine ink cartridges do not work, and seeing that the cost of the printer is less than $ 100, Yes... it's basically a Jet printer away. Wish I had better news for you.

• Photosmart e-All-in-One Printe: Photosmart e-all-in-one - D110a does not print text or Doc file

  Until that number today printing problems.

  Now can't print from Word or any text file.

  All other OK.

  Uninstalled and reinstalled SW.

  Problem remains.

  Word files and text printed in WHITE.

  All others are OK.

  Hey @Clark_Stillman,

  I understand that when you print from your Windows 8.1 computer to your HP Photosmart e-all-in-one printer D110a print jobs are coming in white. I would like to help you today with this printing problem. When you print from your computer, some files are sent to your printer as "image" files If your printer 'think' it prints an image, color ink may be used to enrich or to 'do' the dark. This can be misleading because your machine can really be confronted a black ink, problem of print, but you may think that your machine works great as always black appears in print. While in reality, it's just the ink to mix color to black. Therefore, at the beginning troubleshooting I'll have print you a standalone report diagnosis on the quality of your printer. This report will help us determine if this printing of the blank page problem is caused by your printers ink system or your computer. Can I please you follow the steps below.

  How to print a report of quality diagnostic:

  1. Load plain white paper in the input tray.
  2. Tap the button of the ATM () next to the icon of configuration () in the lower left corner of the control panel.
  3. Press arrow right () and select Tools, and then tap OK.
  4. Press arrow right () to select Print Quality Report, then tap OK. The printer prints the report.

  

  • If this report prints perfectly: Only the blank page printing problem isn't be caused by your printer. On the contrary, there may be a driver or a conflicts between your computer and your HP Photosmart camera setting. Can I have it please click here to download and run the HP print and scan of the doctor tool. Once the tool downloads, please run the tool to the "difficulty of printing." If connection, software or driver conflicts turns out that the HP print and scan of the doctor tool will attempt to resolve these conflicts for you. Once the tool has completed please test printing from your computer.
  • If this report does not print correctly:  That the problem you are experiencing is caused by the printing of your printer system. To solve this problem of print quality can I please have you click here to access the appropriate troubleshooting steps. Once the support document opens please run through the Solution, one five, six Solution and seven. This includes all sub-steps under the listed Solutions. Once completed the print quality troubleshooting steps, please try to print to see if the problem is now resolved.

  Please reply to this message with the result of your troubleshooting. You can also click thethumbs up' ' icon below to say "thanks for the help!" I look forward to hear from you!

• DeskJet 2050 all-in-One - J510: how to print without borders?

  I try to print my project on paper to A4 borderless, but it seems that no matter how to change settings, the results still had a border. Can someone give me some advice on how I could solve this problem?
  
  I print on Word, and my printer is HP Deskjet 2050 all-in-One - J510a.

  Hello.

  The deskjet 2050 printer does not support printing without margins, as you will find by notebook loads below:

  Without borders: No.

  http://h20195.www2.HP.com/v2/GetPDF.aspx/4AA1-1465EEE.PDF

  This material allows to print only to a certain margin.

  The lower border is 0.57 ", the top border is 0.06 'and the left and right borders are 0.125. any impression beyond these margins is cut off due to the limitations of harware.

• HP psc 2355 all-in-one: PSC 2355 all-in-one scan, but not print

  The printer was purchased at a garage sale may be a few years back. It scans perfectly fine, but it will not be printed. I tried searching the Web for drivers and uninstalling/reinstalling it, even the installation under another pilot as series 2300. The closest driver that appears is 2350 series. Windows Update crashes when I try to get to find the drivers more.

  Print a test page once, he hasn't done anything since then except to give me errors on the printer LCD. I have only a black cartridge in it because I don't need color, but I doubt that's the issue.

  From the looks of things, this is a common problem... I saw a post where someone has too, but nothing has worked.

  I am running a computer portable 64-bit windows 7, home premium and USB connection.

  Hey @TKStall,

  Thanks for getting back to me with the error messages.

  The value 0 x error messages you see on the screen of your PSC 2355 all-in-one indicate a hardware failure in your printer ink system. Because the errors seem to be intermittent at the moment it is you may chance using your printer for a little longer. However, there is a hardware failure occurring within the printer and for this reason, there is a chance that your printer may stop working at any time.

  Troubleshooting steps for error 0 x can be found here. But, as you can see one troubleshooting step is to perform a power reset on the machine. If the power reset does not clear the error state that a replacement of the entire unit would be necessary.

  Try to install your printer using the driver PSC 2350. However, if the error messages continue to appear on your printer, I would recommend reaching out to the Technical Support queue by phone about the options for replacement of material. Due to the age of your printer, you may have the option to update your PSC device for a newer model at a reduced price.

  HP Technical Support can be reached at the: 800-474-6836.

  If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  Worldwide contact HP

  It has been a pleasure to work with you. I wish you good luck going forward with this!

• All-in-one HP Envy 4500: printing a Web page

  The procedure to print a web page has changed all of a sudden.

  Until today, it's simple. I clicked on the print icon in the bookmarks bar. This launches the print dialog box. I then clicked on 'Préférences' to select the print quality and finally on 'print '.

  Today, I wanted to print confrmation of a command line. When I click on anything that is in the print dialog box, another window open.

  I managed to select my printer, but when I clicked 'Print' nothing happened. In addition, I could not any setting beyond the number of copies and if you want to print on one or both faces. What is going on?

  Hi @hbf1842,

  What is the new name of the printer now listed as default printer in devices and printers? (Like 4500 or class envy 4500)

  If the class driver is installed, it would be a preinstalled Windows driver and it should not the automatic option to duplex. You will need to remove and add the urge to 4500.

  If you still experience problems, uninstall and reinstall the printer software again.

  • Uninstalling the software of the printer (Windows).
  • HP ENVY 4500 e-all-in-One Printer series full feature software and drivers.

  The HPePrint driver is automatically installed with Windows 8. Just make sure that it is not selected as the default printer in the future.

  Thank you!