Problems as well HP Pavilion G6 1331sa motherboard

Similar Questions

• Problems of replacement HP Pavilion dv6t-6100 Quad Edition (LM332AV) fan

  Hello!

  I had a fan problem with my HP Pavilion laptop dv6t-6100 Quad Edition, product number LM332AV. All started about 3 weeks ago.

  If you do not need the basic information, go to the sections at the bottom under the PRESENT IS THE PROBLEM and here ARE MY QUESTIONS.

  SPECS (copy and paste in the e-mail that I got when I ordered it last year):

  dv6t Quad Ed
  • land of dark shadow
  • Genuine Windows 7 Home Premium 64-bit
  • 2nd generation Intel Quad Core i7-2630QM (2.0 GHz, 6 MB L3 Cache) w/Turbo Boost up to 2.9 GHz
  • 1 GB GDDR5 Radeon (TM) HD 6770M Graphics [HDMI, VGA]
  • FREE upgrade to 6 GB memory (2 DIMMs) DDR3 system
  • FREE upgrade to 750 GB HDD at 5400 RPM with Protection for hard drive HP ProtectSmart
  • No additional desktop software
  • No additional security software
  • 6-cell Lithium-Ion battery (standard) - up to 5.5 hours of battery life +++
  • 15.6 "diagonal screen Full HD HP anti-glare LED (1920 x 1080)
  • FREE upgrade to the Blu - ray player & recorder DVD SuperMulti
  • HP TrueVision HD Webcam with integrated digital Microphone and HP SimplePass fingerprint reader
  • Intel 802.11b/g/n WLAN with wireless display stand
  • Standard keyboard with numeric keypad
  • HP Home & Personal store in box-envelope

  ----------

  Possibly related problem: a month ago, I had my first BSoD since the purchase of this laptop and back up the error driver conflict. (The HP wireless driver is in conflict with the Intel wireless driver AND wireless driver windows.) It was an easy fix and I've not had a BSoD since. I speak only because it happened shortly before the fan problems started.

  During the week following the driver problem, the fan is sometimes very hard. Soon, it was impossible to ignore. Finally, one morning I turned on my laptop and it gave me an error screen explaining that the fan was not working properly. (Unfortunately, I forgot to write the error message before off.) I turned it on again because I really need to do some work, and the fan was quiet until he end of the initialization of Windows, then the noise started again. I quickly turned it off to avoid overheating.

  I tried to clean my fan with the typical technique of blowing-air. That did not stop the noise. I found this manual from this page on the HP website. After the manual I disassembled my laptop and clean any dust that I could find. The fan was a little dust inside, so I go back the laptop and he did it again. Unfortunately, the noise continued.

  So I decided to order a new fan. Using the same manual, I found the the product number of the fan page 90 (which is in fact the page 98 of the PDF). Because my computer has an Intel processor and the graphics card Radeon has 1 GB of memory separate, I ordered the fan with the part number 641477-001 from this Amazon page, that meets these specifications.

  Replacement fan arrived two days ago and I took my laptop apart this afternoon to put it in.

  That IS THE PROBLEM: When I took out the old fan, I noticed a sticker on it that says:

  REPLACE WITH HP SPARE

  650797 001

  CX116O

  But 650797-001 is the fan for laptops with a graphics card of Radion with 2 GB memory discreet! No 1 GB! My laptop seems to be entered with the wrong early fan!

  I immediately called HP customer support. After almost 2 hours on the phone and make up for a product manager, that's what he told me:

  "Since your laptop was an order custom, fan 650797-001 has been used instead of the fan 641477-001 because it has a higher RPM." (Paraphrase).

  When I asked why it was necessary, I was told this:

  "You ordered need CPU fan faster to keep it cool." (Once again, to paraphrase the explanation).

  I was quoted $193 so that it sets 1 to 2 business days ship the box for it and 3 to 5 business days to ship it back. I asked to order the fan 650797-001 and made myself instead, but he told me that HP does not allow customers to order fan parts and seemed surprised that I was able to order one at all.

  I already without my laptop for 3 weeks and the cost of replacement fan $66. Even assuming that I get a refund for the fan, I'm not sure I can afford another week or more without my cell phone.

  I am so here for a second opinion.

  ARE the MY QUESTIONS:

  If my laptop order is supposed to have 1 GB of memory separate, why is he with this fan? (I felt like the explanation I got technical support is designed to force me to leave and pay).

  I can argue it's lack of HP for the use of the wrong fan for this Radeon card and at least get a discount on repairs?

  Is anyone aware of a place that I can control the fan 650797-001 and do it myself for less money? (Amazon does not appear to have one).

  ----------

  I lose my patience and want to fix things. Let me know if I need to provide any additional information.

  Thanks in advance to anyone who takes the time to answer!

  -Levi

  Hello LeviRK.

  You can not order more much of HP by phone, only a statement select bit.  However, HP provides other services to allow you to buy almost any part of the laptop.  The best resource is HP part Surfer.

  I took the freedom to search for the part you are looking for, 650797-001.  Class page for the party as is no longer available through HP and suggests the part number 665309-001.  The interview Guide & Service you already has all the other information you need.

  I hope this information helps.

  
  

• Problems of the HP Pavilion dv4-1155se

  I am having some problems with my HP Pavilion dv4-1155se sound.

  The problem is the sound distorts when reading there.

  The distortion is not always present but it distort once or twice every minute even when only applications that are running are "windows media player" and "windows sidebar".

  I have not noticed any difference with the distortion when the processor is running at a higher load.

  This laptop is only 3 weeks and I just installed google talk and google chrome.

  Help will be appreciated.

  My profile

  HP Pavilion dv4-1155se. / vista windows home premium 64-bit SP1 / AMD turion X 2 ultra @ 2.20 ghz/4 GB Ram / bought August 2008

  What do you mean by 'distortion '. Is it crackling, getting completely, something else? The problem only occurs through the built-in speakers or is it so when you plug head phone? If it doesn't happen out of the speakers so it could be a problem of speaker and you will need to have serviced it. If this happens off helmet too then this is probably a problem with audio card. If it's a problem of sound card so I will try to reinstall the driver of the RECOVERY Manager (I think the driver for this model is conexant high definition audio driver). If THIS does not work, then it could be Wireless interference. Some DV4 do not have enough shielding between the Wi - Fi cards and audio and this causes reactions. Find the switch wireless on the laptop and turn it off. If you turn off the wireless and the distortion disappears all of a sudden, then you know that this is your problem. If you have a DV4 without enough armor and you are still in warranty, you sent him have this fixed.

  Message edited by iam_fletcher on 11/23/2008 17:24

• HP Pavilion m7775uk-a: motherboard problem

  I am the owner of a beautiful

  HP Pavilion Media Center TV m7775.uk desktop PC Bundle

  I currently have a 500w power supply, a Core2duo 2.4 GHz and have recently updated to win7/64 bit

  Running also 4 GB of Ram

  It is possible to upgrade to 8 GB on my current setup?

  Thanks in advance

  Kal

  See answer in your other thread.  http://h30434.www3.HP.com/T5/desktop-hardware/RAM-upgrade-issue/m-p/5224626#M102379

• Swapped the HARD drive of the Pavilion G6 2264sa with a Pavilion G6 1331sa HARD drive / brightness not wking... !!

  Hello

  Hope everyone is well and wonder if anyone can help me. My problem is my daughter's laptop, she is in the middle of the student to College and all of his work is on his laptop which is a:

  HP Pavilion G61331sa/1.6 GHZ AMD Quad-Core A8 - 3520M APU with Dual Radeon 6620 graphics card + 7450 M / 6 GB memory / dedicated graphics video AMD Radeon HD 6620 + 7450 M bi - GPU (1 GB of DDR3 memory) / 750 GB SATA (5400 RPM) HARD drive / running Windows 7.

  Unfortunately, my son accidentally spilled juice on the laptop. I quickly took all the preventive measures, turn off the power / battery disassembly / HDD and upsets the laptop. I also left in the closet of broadcast for a few days to dry out, then tried again. It lights up and the power light stays on and the fan works but the caps lock button warning light flashing and the screen remains empty, even when I try to use an external monitor via HDMI connections again the external screen is blank. It seems that most of the spill was on the left side of the keyboard because the keys are very sticky this side. I talked to HP to my problem that the laptop is still under warranty, however as we know that it does not cover accidents, and no, we don't have the coverage of the accident. My daughter is in the middle of exams a solution was needed pronto. It was suggested by HP techy guy to buy the modern equivalent with the same HARD drive and just change the HARD drive and update all the drivers.

  I bought a HP Pavilion G6 2264sa / Intel® Core™ i3 - 2370M / 4GB memory / 750 GB SATA Hard Disk Drive / graphics Intel HD Graphics 3000 (up to 1.65 GB) running windows 8 (64-bit).

  I changed the HARD disk as proposed and updated all the drivers. There was a slight problem starting up but just had to go into the BIOS at startup (F1 key) Startup Configuration / settings and do know the Boot from the HDD instead of CD ROM, etc.. The HP Pavilion G6 2264sa started with the G6 1331sa HARD drive and works very well. My daughter doesn't have to worry about spending time to find away around a new laptop and windows 8. everything is just where she knows that it is.

  The only problem I have is the brightness (f2 and f3) doesn't seem to work and the screen is very bright degree to cause a headache. I have uninstalled and installed the graphics drivers but still no control over brightness...!

  Any ideas where I have gone wrong?

  Your suggestions and ideas will be very well received and appreciated.

  Thanks in advance...

  This computer does not display any right screen?

  And caps lock flahs once in 4 seconds?

  If it has been: is failled into a CPU and they want also to repair or change your motherboard.

  In any case, go to a place and make planning expenditures compared with the price of your laptop.

  Other way, the disk its ok so your girls its safe.

  You are very wellcome.

  If the HP Forum do not delete my account, I will have more pleasure and response.

  Tank You

  Cristian deruy

• Problem with update display Pavilion dv6 drivers - 3023ca

  Hello

  I am not well eaten English so I do short...

  I have this type of laptop: HP Pavilion dv6 - 3023ca Entertainment Notebook PC

  I just installed a new version of windows 7 Home premium x 86

  When I tried to install my display drivers her did not work at all

  I had these problems as:

  • I can't play all video files by KMPlayer (or any similar programs)
  • Job of dosen't effect Aero (trouobleshooter said that it is because of my type of graphics card or driver)
  • I can't use the option of sleep to the start menu

  Here is a picture of Deviece maneger:

  

  If the drivers must be installed correctly

  But it still does not work

  I downloaded all drivers (I used the site AMD official and even here I have even updated their Windows) but still I got the problem

  So I used HP Support Assistant to troubleshoot and test my card graph (or display)

  (Home > troubleshooting > graphics, video and display > video check HP)

  It took just a minute to give me this error:

  Test Result: Fail
  Failure ID: UC462J-56C6NU-PXG03G-Q0NX03
  
  HP Graphics Video Check detected an issue while running. The directx SetCooperativeLevel function has failed. Graphics card may be defective.  Please retest, if problem persists copy down Failure ID code and contact HP support.
  

  So I retested it but same story happened again

  Now you know the identification code

  What should I do?

  Failure ID: UC462J-56C6NU-PXG03G-Q0NX03
  

  Qanea wrote:

  Hello

  I am not well eaten English so I do short...

  I have this type of laptop: HP Pavilion dv6 - 3023ca Entertainment Notebook PC

  I just installed a new version of windows 7 Home premium x 86

  When I tried to install my display drivers her did not work at all

  I had these problems as:

  • I can't play all video files by KMPlayer (or any similar programs)
  • Job of dosen't effect Aero (trouobleshooter said that it is because of my type of graphics card or driver)
  • I can't use the option of sleep to the start menu

  Here is a picture of Deviece maneger:

  

  If the drivers must be installed correctly

  But it still does not work

  I downloaded all drivers (I used the site AMD official and even here I have even updated their Windows) but still I got the problem

  So I used HP Support Assistant to troubleshoot and test my card graph (or display)

  (Home > troubleshooting > graphics, video and display > video check HP)

  It took just a minute to give me this error:

  Test Result: Fail
  Failure ID: UC462J-56C6NU-PXG03G-Q0NX03
  
  HP Graphics Video Check detected an issue while running. The directx SetCooperativeLevel function has failed. Graphics card may be defective.  Please retest, if problem persists copy down Failure ID code and contact HP support.
  

  So I retested it but same story happened again

  Now you know the identification code

  What should I do?

  Failure ID: UC462J-56C6NU-PXG03G-Q0NX03
  

  Hello Qanea.

  I looked at the failure code and confirms the results of the test.  The video card (the card integrated Intel HD) is having problems.  It probably needs to be replaced because the question is right after a reinstall of Windows.

  Have you tried running HP Support Assistant to ensure that the laptop is to install all the correct drivers?  Here is a link.

  Could you provide me the product number?  I can use this information to get you details instructions to replace the motherboard, which is the most likely solution to this question.  This document can show you where it is located.

  If you do not want to repair the laptop you can always contact the HP support directly.  The number for US / Canadian customers is 1-800-474-6836.  If you are in another part of the world, you visit HP's Support around the world to find the coordinates for your region.

  Have a great day.

• Pavilion 500-164: motherboard replacement raises Questions

  
  

  Thanks, Malygris1, for your very comprehensive answer.  Unfortunately, I'm looking forward and installed the new Board of Directors.  For those faced with replacing a motherboard HP, I will elaborate on my trip.  The most important step was in buying for the motherboard.  I have no HP, but from a dealer on Ebay.  I DID, however, carefully note the model of the motherboard AND the designated HP part number of alternatives on a small paper on the motherboard label.  The same motherboard model is used in several models of HP Office; but, if the number of HP spare parts is matched, the info on the model should be on the motherboard.

  My original problems were solved with the installation of the new Council.  After a router struck by lightning, the ethernet port had stopped working, and when told to stop, or in standby mode, the machine would invariably restart.  The new motherboard solved both problems, which seem to be related to the power surge.

  I installed the new Board of Directors of the Windows 10 updated 500-164 and held my breath I have it powered for the first time.  I was pleasantly surprised to see that everything looked the same as when I left it.  Recognized support assistant the new Board of Directors as part of a desktop computer 500-164.  I have not tried; but I hope that the recovery media will work, if necessary.  Malygris1, do you think that if Support Assistant recognizes the info on the model, the recovery disks will work?  I'm curious to know how it works, but, if not, no big deal, as I now have a new image Acronis 10 Windows installation, which works perfectly on the 500-164 Pavilion (without "Pitfalls", as some have reported with audio, etc. of the wireless card.).

  My second concern was whether or not Windows is always activated with the installation of the new Council.  He said that he "Windows is not activated.  ... Rats and other profanity.  I know it can take time to be put in correspondence with the info from Microsoft, so I updated the bios and checked the rest of the ports for the features of the machine.  I returned in configuration/system Panel and he told me that the activation information were "unavailable" - different from the message 'not active' sooner.  I've been waiting on this screen for a few minutes and the message changed to "Windows is activated"!  I was ready to make Microsoft telephone activation and I had run a keyfinder to get the original MS product key for Windows 8 from the hard drive, but I didn't have to use both methods.

  So, in summary, if you want a card mother 'replacement', shop for the exact number of spare parts HP; not only the MFG part number.  It will save you a lot of grief.  Obviously, if you want to 'upgrade' from your motherboard, all bets are off, because it's a totally different scenario with different issues to deal with.  My project was a complete success at a cost of $103 for the new motherboard and several hours of my time.

• The HP Pavilion dv6-6154sf motherboard

  Hello

  I own a HP Pavilion dv6-6154sf. Native HD, a Toshiba MK1059gsm, out of retirement in the first two weeks of use, and I have no warranty on it because it was an exposure model...

  It also appears that recovery discs are no longer available for this laptop (I wouldn't mind being wrong, however). I currently have another HD that came with my previous laptop inside, but I'm afraid it may fail soon also. So I have a few questions before I start spending:

  • is the motherboard (Hewlett-Packard 3590 33.18, according to belarc advisor) supports the 7200 RPM drives?
  • I understand it would be equal to 1) provide no support for SATA 2 or 3; (2) support SATA 2 or 3, but with the speed of the SATA 1; (3) support SATA 1, 2 and 3; so which of these possibilities is it?
  • I might as well ask, always; is there really no way more (even from other sources) for me to get a recovery disk now that best2serve it lists as is no longer available?

  Best regards

  RGE

  Link to .iso OEM for Windows 7 HP 64 bit with SP1:

  http://MSFT.digitalrivercontent.NET/win/X17-58997.ISO

  This is a large file and you can't just burn it on a disc, you must use a program to rip .iso. Let us know if you need some help with that.

• Pavilion dv6 1110ax motherboard replacement

  Hello

  Recently my 1110ax BIOS corrupted and m unable to get by any way mrntioned on the forums.

  Key combinations don't work not and this USB STICK.

  Now the service center guys say that the motherboard has problem and must be replaced. which I doubt completely.

  Is that what someone can say if I can keeping my existing AMD turion processor & card graphics ATI radeon 1 GB to save cost.

  And is it possible to upgrade the processor and graphics card.

  I had been using this laptop for 5 years now and really don't want to give up on this...

  Receive no response.

  You can save the processor and the memory and the hard drive, but the video is part of the motherboard. The processor you have is:

  AMD Turion RM-74 2.2 GHz with 2 MB of L2 cache

  It's the fastest that can be installed:

  AMD Turion™ ZM-87, 2.4 GHz with 2 MB of L2 cache

  A ZM-87 is about $40 on eBay and I'll tell you that it is not worth it for a ghz upgrade.2.

  Radeon 1 GB video is upscale for the dv6-1000 series, so there is no better mother/video card.

  It's the motherboard:

  509450 001

  It is a good deal at $78 for the Board of Directors:

  http://www.eBay.com/ITM/HP-Pavilion-DV6-1000-series-AMD-laptop-motherboard-509450-001-good-USA-/370931290463?PT=motherboards&hash=item565d3a515f

  If it's 'the Answer' please click on "accept as Solution to help others find.

• Problems with drivers hp pavilion dv6-6c65sx new after that I installed windows 7 ultimate 64-bit

  I have hp pavilion dv6-6c65sx A7P80EA #A2N. I installed my windows 7 ultimate 64-bit myself and I still have two problems with the hardware drivers.

  1 - once, I downloaded and installed the new graphics driver file name Win64_152822.exe for support of the Intel, the Standard VGA Graphics Adapter the unknown value and it may need new driver. Take a look at the screenshot for more information.

  

  

  

  2. I can't use a fingerprint reader to log on windows. It says that I have not installed on application management. I tried to download some applications also tried to update the driver but nothing works for me.

  It's for more details

  Validity sensors (WBF) (PID = 0018)

  Port_ #0001.Hub_ #0003

  Hello:

  It is the only driver you must install for your model.

  He installed the AMD graphics cards and Intel.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-105178-1&cc=us&DLC=en&LC=en&OS=4063&product=5212696&sw_lang=

  In order to register your fingerprints, as well as the print real finger sensor driver, you must install the security software.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103162-1&cc=us&DLC=en&LC=en&OS=4063&product=5212696&sw_lang=

• HP Pavilion p6-2143w: motherboard will not switch to the graphics card: Sapphire Nitro R7 370 4 D5

  Plug
  The APU A6 - 365 graphics AMD Radeon HD 2.60 GHz
  8 GB ram corsair
  B800M Max Bron Lepa PSU
  Windows 7 64-bit Ultimate

  My problem is that the jury is not automatically pass to the Sapphire Nitro R7 4 370 D5 card. All I get is a black screen. I tried to disable graph embedded in the Device Manager with no luck.

  I also tried looking for a bios update, but I couldn't find one that was on the hp Web site.

  Please help I don't want to buy a new motherboard and cpu.

  Hello

  Most graphics cards require BIOS version 8 HP.  BIOS version 8 is listed under Windows 8 for your particular model PC.  While the BIOS version 8 will probably support your new graphics card, you might find yourself stuck that Windows 7 will not work using the UEFI. You can install BIOS and then turn on legacy mode and see if the card works. However, if the card is a single card UEFI well then you are in a situation of 'catch' 22 In this case, you would have the BIOS later and W7 should always work in legacy mode.  Even with this BIOS update running in mode inherited that there could be some risk that W7 will not work.  Once you update the BIOS there is no coming back.

  Another thought.

  There are no Windows Ultimate 10 version if upgrading to W10 (free upgrade) would you put on the professional version W10. I do not know if that would suit your needs. However, if you have a place in the upgrade by using the W10 iso DVD or flash drive then you could extract the W10 license key so that your could do a clean install with legacy mode turned off in the BIOS that puts your PC into UEFI mode.

  You have a few risks to consider.  In addition, HP has not posted the W10 for your PC drivers.

  What would I do?  I'd go for it, but then my wallet could be deeper than yours.

• Problems with my hp pavilion g6

  Hello, I got a big problem with my laptop.

  It is a Hp Pavilion 2146sl G6 and who needs an upgrade every time, she starts to do it, but it stops at 12%. So I can't upgrade my pc, even with the windows upgrade, automatically as well.

  Can you help me please?

  He was a windows7, but now is a Windows 8.

  Best regards.

  Roberto

  That's great! Please mark this message as accepted solution so that others facing the same issue may find this answer.

• Strips of problem on my HP Pavilion dv6-6141eo

  Hello!

  I just bought a new computer and have banding problems. All images with 'degraded' (for example, from black to white) will be "spotted", as 1 million points instead of a fade. How can I fix?

  The computer has the following features:

  HP Pavilion dv6-6141eo

  Windows® 7 64-bit

  Intel® Core™ i7 2630QM processor

  39.6 cm (15.6-inch) high definition HP LED BrightView Display

  8 GB memory (long live RAM)

  Thanks for the replies!

  It sounds like a hardware problem, connect an external monitor and see if it happens there. If so, then there is a problem with the motherboard, if it is OK, then the laptop screen is defective.

  In any case, the screen is probably defective or is the motherboard at fault (video card) back for a refund or Exchange.

  It's a new computer of bran and you shouldn't have to pee with her.

• problem with hd audio, windows xp new motherboard asus with realtek alc1200 audio

  Hi, I have a new motherboard asus P6T, hd audio realtek onboard, all loaded fine, but I have no sound in windows. sound plays very well in the realtek Control Panel, but it won't play in windows. Realtek is set as the default audio playback, but in the main volume all the outputs for sound hd are disabled. I have installed the latest drivers, did not help. Don't know what to do from here, seems to be a windows problem more realtek. any help is appreciated.  Thanks Bill

  Check out all the sound options (usually accessed via the sound in the taskbar icon)

• power problem only with HP Pavilion ze4400

  Hi all

  My trusty Pavilion ze4400 suddenly stopped responding when plugging in a power supply. Light that indicates that the battery is charging not connect anymore. I can't make it work without a power supply because the battery has almost completely lost his ability. There is no problem with the operating system or the hardware, I was still working with a few hours ago.

  My question is: is there a way I can get my data from the hard drive? Perhaps by removing the disk hard drive itself? I searched with the envelope and even down it does not seem easy.

  Is there anything else I can try? I thought about putting a new battery in there, but it must be already loaded and I can't load it with my laptop.

  Any help and suggestions would be greatly appreciated.

  Thank you!

  This could be a number of things.

  (1) the charger is dead. The Chargers do not last forever. If you know someone with a similar laptop that uses the SAME charger, try this to see if it helps. Make sure the charger is the same voltage, same polarity and is the same size plug.

  (2) the laptop has a hardware failure. Where your charger plugs into the laptop may be damaged by the cord pulled in a clumsy direction. Over time this can happen as well due to the odd tug on the cord. If this is the case, you will need to have it repaired by a technician.

  (3) the unit is cactus. There is also the chance of the machine is dead. Does not simply because he was working an hour ago, there no FRY in the last hour. These things are happening.

  Get your hands on a charger that is proven to be good is the first step to find the fault.

  If you find that the device is dead, you should be able to remove the HARD drive. Computer portable HARD drive are a usable user component and are usually accessible by removing the two small screws on the bottom. If the HARD drive is a SATA drive you can simply connect it to a desktop PC to access your data. You could also use and external box so that you can access the HARD drive via USB or eSATA.

  If it is an IDE HDD then you need a 2.5 "IDE to IDE adapter 3.5" or an external enclosure 2.5 "IDE.

  I hope that it helps anything here!