Problems by applying a master

Similar Questions

• Problem to apply a master page

  ID, CS4, I created two masters for a book project - one for the first page of each chapter, the other for all other pages in the chapter. So far, so good: I placed a MS Word doc in the file and I see all six pages of Chapter 1. Now, I want to start Chapter 2 on page 7. So, I applied my first page master on page 7. I see my 'chapter Nr' upstairs, lower than "Title" and the page number in bottom. Now, I want to replace "Chapter Nr" with the actual number and the "title" with the title of the chapter, then flow the text into the page in the remaining space. All items are in dotted line boxes, but when I click on one of them, nothing happens. I was expecting points must be replaced by a solid line box, and I'd be able to change the text in each box and then place text in the bottom text box.

  I guess I'm doing something wrong here, but I can't understand what it is. Any suggestions?

  Thank you, John

  Have you tried Cmd (Ctrl) + Shift click on the frames of masters to replace them? Are they locked up?

• Apply the Master Page by using the paragraph Style

  Hi all

  I am a beginner in the script. Learn the script through tutorials cs3 scripts.

  According to the paragraph style it automatically applies the master page.

  For example:

  Paragraph style = "CT".      To apply the Master Page = 'A-Master '.

  Paragraph style = "PT";       To apply the Master Page = "B-Master".

  These are the lines I'm working on:

  myDocument var = app.activeDocument;

  var myPStyles = myDocument.paragraphStyles.everyItem () .getElements ();

  myPage var = myDocument.pages.everyItem () .getElements ();

  for (i = 0; i < myPStyles.length; i ++)

  {

  If (myPStyles [i] .appliedParagraphStyle is "CT")

  {

  .appliedMaster myPStyles [i] = 'A-master. "

  }

  }

  Where I have error. Can someone help me solve this problem.

  Thanks in advance engineering...

  Try this one,

  var myDocument = app.activeDocument;
  var myParas = myDocument.stories.everyItem().paragraphs.everyItem().getElements();
  var myPage = myDocument.pages;
  for(i=0; i
  Good luck...
  		   

• Can I apply a Master Pages 1 Page 2?

  Hello

  Is it possible to apply 2 Master Pages to 1 Page?

  Whenever I'm trying to apply second master, the attributes of the first disappear.

  I work with InDesign CC.

  Thank you

  Joanna

  Create a Master Page that is based on the master page that you want to keep the items.

  In the new Master Page, the original master items are locked to this basic form - and you insert additional items.

  Apply your new master page Page for that you need.

  Using InDesign | Master pages

• Script to apply the master spread

  Hello

  This Script is for the page master opener co applying everywhere where CN is applied, when we run the script, it warns Sucess.But master spread is not applied. Please resolve.

  var mydoc=app.activeDocument; 
  var mypara = mydoc.stories.item(0).paragraphs.everyItem().getElements();
  for(i=0; i<mypara.length; i++){
      if (myPara[i].appliedParagraphStyle.name=="CN"){
             mypara[i].parentTextFrames[0].parent.appliedMaster = mydoc.masterSpreads.item("CO-Opener");
          }
      }
  alert("Master Page applied Sucessfully")
  

  Hi Math,

  I hope that your code is correct, but it seems [0] stories have no Styles "CN".

  Change the threshold:

  var = mydoc.stories.item mypara (0).paragraphs.everyItem () .getElements ();

  in

  var mypara = mydoc.stories.everyItem ().paragraphs.everyItem () .getElements ();

  Thanks Jongware and Green4ever...

  and also the use of the below url to get coding right for CS4 and CS5 and higher

  Apply the Master Page by using the paragraph Style

  var myDocument = app.activeDocument;
  var myParas = myDocument.stories.everyItem().paragraphs.everyItem().getElements();
  var myPage = myDocument.pages;
  for(i=0; i
  Concerning
  Siraj
  		   

• Error message 'problem to apply tags/info '.

  When trying to drag and drop images of all local media Albums of 'problem to apply tags/info' error message is recent but persistent. I always moved images to albums by drag-and - drop.

  Brian,

  Thank you. Problem solved.

  George Thomson

• How to apply a master page to several documents at the same time?

  How to apply a master page to several documents at the same time?

  > The format of the page master is get imported, but the first page of all documents still remain with the format of page master default 'right '.

  AMP?

  Some content is unique to the first page mapped on master page first in the table to:
  View > reference Pages... MasterPageMaps

  That page and table do not exist by default, incidentally.

  and you make a:

  Format > Page layout > apply Master Pages

  After doing the import?

• Apply a master page to a different Master Page?

  is it possible to have a master page applied to a different master page, so that the changes to the master-A are applied to Master-B?

  Hello

  This feature is not there in Adobe Muse. However I suggest you save it as a feature request on our 'Ideas for the functionality of Adobe Muse' section.

  http://forums.Adobe.com/community/Muse/ideas

  I hope this helps.

  Kind regards

  Sachin

• Insert the Page without re - apply the Master Page

  Hi, using InDesign CS5, I try to insert a page after page 1 of a catalog without re - apply the master page to all pages that follow - is - possible? I have set up in the master that I would delete not instead of text boxes.

  Any advice would be much appreciated.

  See you soon,.

  DC

  Sorry, I know that this was not clear.

  When a page switch sides in the spread of the elements of the template that have been overridden, as blocks of text in which the text has been flowed, will be maintained, but the new position of the page also has main objects and these masters objects will all be there. In the case of things like the headers or footers or other objects that have not been overridden, new objects will appear and the 'old' will disappear, but for what it is overridden, you'll have the old and the new. Without using something like the plugin Pro Auto-Flow - Tools.com, the only way to avoid this is to add or remove multiples of two, or rethink the use of the main object. These blocks of text should be on the master page? You can "auto format" text without master images, and most of the time setting the margin and column guides to contain the flow is preferable to the use of a block of text type for precisely the reason that you see.

• Problem with sending of master header with XNET API instead of CAN frame API

  Hi nice guys.

  I am using the XNET API to switch Master slave with LIN Protocol task. Since I have no prior experience, there is something problem as the Interface of the NI USB-8476 s cannot be detected. Gifts of windows prompted the following information:

  Error-1074384758 is produced in .vi:1 XNET create Session (single-point output Signal)

  Possible reasons:

  NOR-XNET: (Hex 0xBFF6308A) the name of the interface does not specify a valid and existing interface. Solution: Use a valid and existing interface. These can be obtained by using MAX, XNET properties of the system, or the name of LabVIEW XNET Interface IO. If you use CompactRIO, see the topic "Getting started with CompactRIO" in aid of software and hardware OR XNET.

  but in the MAX of NOR, the device is detected as "LIN0. Even control interface entry in the examples NOR displays the error. But if I take the CAN API of frame, it works well.

  Does anyone have an idea. I'm so appreciate. Tanks in advance.

  Best regards

  Melo

  Dummy me, know that the XNET API still do not support the NI USB-8476 s, which I am applying.

  Kind of hard to use the API NEITHER of MAY to get the feature I need, that seems easy to get with the XNET API.

  Problem solved!

• The underlined words on my blog that links to the ads. disobeys in Explorer. It is not a problem with my blog master - only on Firefox.

  When I opened my blog articles using Firefox, words are underlined and linked to the ads. When I use Explorer, the words are not underlined and no ads appear. Already checked with my blog master because I paid the extra to have no advertising. Apparently it is from your program. What can we do to get rid of this or what I need to change to another browser? Thank you!!! My blog is www.pattiannthompson.wordpress. com

  Hello

  This does not happen for me. It could be the work of a bad extension, try to run in safe mode and see if it still load up ads on your blog.

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• Problem to apply IDSMk9-sp - 3.0 - 6 - S42

  Greetings,

  I'm trying to update a JOINT WS - X 6381-ID unit that is running JOINT GIS - 3.0 - 5 - S39 to IDSMk9-sp - 3.0 - 6 - S42, but it does not work. The command 'applies' works very well, and I see that the file is downloaded, but my connection is the method was ignored before the correction process begins.

  I think I'll have a timeout or time-out FTP problem, but there is no indication in the error logs to confirm that (i.e. JOINT # (diagnosis) display errorfile idsapply).

  Someone at - it suggestions on how I can say this?

  NOTE: I have updated the device IDSMk9-sp - 3.0 - 5 - S23 and JOINT-GIS - 3.0 - 5 - S39 via the same connection without difficulty...

  Hi Alex,

  The following FTP servers are supported for service pack updates and signature:

  Sambar FTP Server Version 5.0 (win32).

  Web-mail Microsoft FTP Service Version 5.0 (win32).

  FTP Serv-U for WinSock (win32) v2.5h server.

  Solaris 2.8.

  HP - UX (HP - UX qdir-5 B.10.20 A 9000/715).

  Windows 2000 (Microsoft ftp server 5.0 version).

  Windows NT 4.0 (Microsoft ftp server 3.0 version).

  Is the FTP server of one of them?

  Thank you

  Christophe

• Apply the master page on the last page

  Just a question, how to apply my Page Master 'last Page' on the last page of my Document. Thank you

  app.activeDocument.pages [-1] .appliedMaster = app.activeDocument.masterSpreads.itemByName("Last-Page");

• Table of contents, problems in applying the character style

  Hi all

  This is my first post, I checked if there was already something similar, but I can't find anything so I'm asking here.

  I work with Indesign 9.3 and I created a book of 80 pages and there are 20 + chapters.

  I wanted to create a table of contents, so I made an and I put my paragraph for her style, but I had problems to set the character style (he set only to the number of the page, but not to the number and the name of the chapter).

  When I create my summary style I have no problem to indicate the paragraph style that you want to use (and then it automatically applies it properly when I generate my list).

  The problem I want to solve, is that I need that my table of contents automatically the value of the character style, cause, for the moment, I have to apply it after its generation.

  Sorry for my bad English, I hope you understood

  Concerning

  Filippo

  In this case you must use the character for numers style nested within the paragraph style

  I'm usually two independent sparagraph styles (primary materials) chapters and sections (toc details). In this way, you can add a different same nested character style to stand them.

  Addibn later - style, it is not good idea. After the update of the table of contents, you have lost the

  macpawel

• Apple - should apply to master VM updates? Or ok to apply to Linked Clone?

  Title says it all. Master 10.10.3 VM. Linked clone used for day to day stuff.

  Today released an update to iTunes. Make the update to the Master VM? That would make the most sense for me.

  Or should we not alter the master and apply the update to iTunes to the linked Clone?

  TIA,

  Don

  OK, I should RTFM... Here's the answer:

  VMware Fusion 6 Documentation Center