Subvi randomly does not work

Similar Questions

• Math.Random () does not work in BB

  Salvation;

  I just want to ask if the BB API, can give the possibility to generate a number of random if yes how can I do; generally in java J2SE: I CAN DO THIS:

  choice = (int) (Math.Random () * 3 + 1);

  "to generate a random number ' 3 nomber.

  I try to do whit BB I import java.lang.Math;

  and when I try to put Math.Random (), it does not work

  can anyone give me the solution?

  in fact I want to have a HEX number, I think I have the Random one after I'll transforms in HEXA.

  Thank you very much

  Here is exactly what you need to get a random number

  first import

  import java.util.Random
  

  then

  //Random number generator
      Random dice = new Random();
      int num = 0;
      for (int counter=1; counter<=1000; counter++){
          num = dice.nextInt(1000); //it will generate numbers up to 1000
      }
  

  You are welcome!

• Help! Siri randomly does not work

  I recently updated my iPhone of 6 (iOS 9.2) 6 s and restored from a backup to iCloud. Everything came smoothly.

  My problem is Siri.

  When I give the simple voice commands; as 'Call my wife', 'which is my brother address', "which is phone number (name)" or "launch Facebook." Siri said something like she can't help you now. Queries like present or the current temperature or the work "who is Rihanna?" very well. It seems to be a problem of access to things on the phone itself. In settings of Siri switching off / on does not work. A temporary solution restarts the phone itself, Siri works for about a day and then the problems start again.

  Does anyone else know this? I'd appreciate any help.

  Thank you

  Hello M,

  Just had exactly the same thing happens to me. I could solve the problem by resetting all parameters. This can be found in settings > General > reset > reset all settings. After restarting my iPhone I tried Siri immediately and she was back to her old self.

  Note: This will not remove any content or media, but you will need to login to iCloud and iTunes, as well as re-setup a few things like TouchID, access code and location Services. Basically any parameter, which was not in a "factory" condition

  I hope this helps!

  T

  

• Table of contents links randomly does not work

  RoboHelp HTML 9.0.2.271

  Word 2010 - documents hosted on SharePoint 2007

  Windows 7 operating system

  Published in a merged help project

  Every time that I generate a project one or several of the toc links do not expand when you click on it.

  Links that do not work change randomly.

  Aboslutely no idea why this is happening. All of them have worked at one time or another but often not completely.

  I spent the last two days to generate and regenerate a project with trailer related word documents and each time the same problem reoccurs.

  Any ideas how to solve this problem?

  No show errors in the error list

  I was thinking about Linked documents such as file > link, but I see you mean URL in your table of contents.

  I can't easily think a reason for their break randomly. Try to delete the PCD files for projects and then regenerate.

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• mainVi Subvi problem does not work when you perform a Subvi

  Hi you

  Wow, I really like the user interface.
  -Can you explain what part of the code, you establish to Subvi?
  -Or by post your mainvi and Subvi after breaking it.

• New keyboard shortcuts at random does not work

  Hello

  I'm under first 2015.4 on an iMac and I'm having a problem where I put the a new shortcut for the path select tool, and it still doesn't work.  All the other shortcuts are beautiful, and I re-kept my shortcut profile.  When I restarted the computer, the new shortcut worked for a while, then stopped again.  All the other shortcuts are always very good.  Thoughts?

  Hi Meg,

  I traced the track selection tool to "," and back to "m".

  What I did which is my current solution is mapped to you and to do there first "forget" who worked.  Really weird, I've never seen anything like it.  But remapping it worked for now.

• HP Laser Jet 1020 does not work. Order random print.

  Original title: printer does not work

  My hp laser jet 1020 printer has stopped printing of pages recently.  Worked well for a long time but print only a few sites will... Thanks for your help...

  You can ask the question in the following forums:

  Printers and all-in-one
  http://h30434.www3.HP.com/T5/printers-and-all-in-ones/CT-p/inkjet
   
  Windows Vista IT Prop - Windows Vista printing forum

  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/threads

  Tutorials on the problem of printers:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  The tutorial consists of 3 parts:
  Step 1:
  Check the hardware
  Step 2: Use a troubleshooting tool
  Step 3: Update drivers

  Application Microsoft Support Fix It:
  http://support.Microsoft.com/mats/printing_problems/en-us

  Try this Windows tutorials:
  It consists of many themes that you can click and read the tutorials.
  There also an Fix It application
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Here is the main link with: Support for Windows
  Technical problems of Vista and troubleshooting - printing
  http://support.Microsoft.com/ph/11732#tab11

   

   

• my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• OSX Server caching does not work after update

  It was low on my priority list, but the OSX Server that we run in the House for the caching seems to have stopped caching; from what I remember, it was related to the update software to 10.11.4 of what it was before, and server software everything that has been installed to 5.1. Updates both to the latest versions now have not helped. It of kind of frustrating, but all he puts in cache are now asking that makes for itself. No customer request is visible. It worked before.

  There seems to be no useful diagnostic that I can find to establish why the hell it suddenly does not work.

  Platform: Mac Mini, "the end of 2014", bought this year. OSX currently on 10.11.5; 5.1.5 Server

  Network configuration: IP public addresses multiple; several subnets.

  Clients do not use the same IP address as a server.

  Full assignment of the IP of the site listed in _aaplcache._tcp TXT DNS records (plural - because I did it for the DNS records for each subdomain DNS LAN client) using the type prs; DNS is on Windows Server 2012R2. Any length of characters, because they were not specified during the installation of OSX Server cached the required DNS records.

  No firewall is between the server and clients on the local network (only a L3 switch), but obviously, if the customer traffic leaves our network, it passes through a firewall. No change to the rule group since it worked finally.

  The Mac Mini has an interface (with IP address and corresponding DNS record) in each subnet of the client (using virtual LANs), but it seems to register with the Apple servers using its main wired LAN IP (which can reach customers) with the Apple servers.

  Mac Mini connects via gigabit ethernet.

  Wireless connectivity is through a mix of HP MSM and Ubiquiti access points; no system seems to result in customer traffic.

  My understanding of the protocols involved are something along these lines.

  -OSX server registers with Apple, using its normal connection; transmits the local LAN IP address for the cache clients to use; can pass TXT DNS records to help "seed" of customers, or can use the parameter entry in the cache server configuration.

  -Customers use the TXT DNS record to inform the global servers of Apple that they need the IP address of the server cache.

  -Apple returns the local LAN IP address.

  -The customer is for the server cache.

  -Profit.

  I certainly see the first happening party - the Debug.log show apparently successful registration; the cache in the applet Server service is green - but no client request seems to happen.

  

  Obscured address IP addresses are correct.

  

  Things are green and just seem to.

  

  Looks like he should be happy.

  

  IPs are correct and correspond to the DNS records.

  Help! What other steps can I take to diagnose - and trouble - this problem? The Apple Help documentation is not really very useful (I understand what he says), but he doesn't really give sysadmin level overview of what to do when he's not "just works".

  Thanks in advance for all understand how to debug properly and fix this.

  .. .clients can and collect software on the internet (that we want to avoid as much as possible).

  Amount of updated data in cache is so small that I did it (reset button) in the case which has been randomly a question. No joy. Was previously more than 300 GB in size, across many types of content.

  If it is not clear, the clients and servers using NAT, but different IP are used, depending on the subnet they come. He previously worked.

• Jet 7 Tablet 5709: HP Jet 7 touch screen does not work in Windows even if it works in the BIOS menu advanced starup

  Less than two months ago, I upgraded my HP Jet Windows 7 to 10. Over time some questions popped up (random apps that could not be opened, etc.) so I decided to do a full reset, deleting the files from the user. Once the 'install' process is complete he brought me to the initial configuration for Windows 10 screen, asking me my keyboard and language preference. He would not accept any contact entry. I rebooted it and he went to the advanced configuration where I could use the touch screen to do a complete reset. That has not changed anything. I found the info on the HP website and did a reset of the BIOS. That has not changed anything. I got an OTG cable, but was not able to get a keyboard work. I did, however, get a mouse works and has managed to create a new user and login. However, the touchscreen does not work in Windows. I was able to get into the settings and looked at the Device Manager settings. There was only a mouse driver listed under Human Interface. I also noticed a number of question marks in the subtopic of the processor drivers.

  I was able to use the OTG cable to try to re - install Windows 10 from a USB key. When a similar initial settings (language, keyboard) screen broke, I couldn't use the touchscreen. Later, I created a USB with Windows 8.1 thinking he might have a better chance. The same problem. He does not touch inputs. And with a key USB installed via the OTG cable, I can't launch a mouse at the same time.

  It is strange that I have not the problem in the BIOS or advanced startup options. It seems that there is a corruption somewhere, but how do I fix?

  Hello Moronihah,

  You did a clean install (delete all files and programs) the 2nd time you reinstalled Windows 10?

  That's what you need to do first.

  Then, you have to go to the HP website and install the drivers on your USB.

  Above all, you need to include the Goodix Touch Controller Driver and pilot, allowing Malta G-Sensor.

  HP Software and Driver Downloads

  You're using a hub 4 ports with your OTG cable? Which will allow you to use the mouse, the keyboard and the entire USB drive.

  

• My HP laptop cooling fan does not work.

  Okay, so. I have a HP Pavilion 1145sg g6. It worked fine all morning, and then I put sleep temporarily (about ten to twenty minutes). When I went to turn it on, the screen was black and he said something along the lines of

  "the system has detected that a cooling fan does not work correctly. Suite operation is not recommended at this time... may result in unpredictable behavior that may result closed random, loss of data or damage the system as possible. »

  Then after a few seconds it stops completely. There is an option to continue with the summary of the system and I clicked once on it, but she didn't go through completely for allowing me to use my laptop properly (I arrived at my wallpaper and it stopped).

  This has never happened before, and I never had any problem with my laptop, like this before. I have had him since last August, and it worked pretty well through until today. Of course, the system sometimes, accused but nothing serious, for the most part just aggravating.

  How can I fix?

  Someone said here that they stung the fan with a hairpin and it started working. I took a toothpick and switched my laptop and tried to move the fan and the fan started WALLA on! I noticed that a lot of dust in there and that's probably the culprit first event hough I keep this laptop clean every day, this darn dust is sneaky and small. If you use a toothpick, make sure not to break anything especially the toothpick. last thing you want to do is cause more harm. Now that I think I don't remember when the last fan worked and if it wasn't for the message that popped up today I would not of the same notice I wasn't to hear the fan because last week I said "wow is not the substance of this portable super hot feeling", but I just thought that my fiance was simply playing games on the computer for too long and that's why he was hot. He never closes the computer off smh. in any case, I'm very happy I read this post of a person using the PIN to hair. That's what forums are all about. Help each other. I hope it works for you. Be gentle, try pushing the way fan propellers in clockwise. Use a flashlight to see if dust or anything like that is by the way to allow the fan to run its on.  I blew in the vents, but it did have almost all of the dust of the road.  All of these messages, it seems this is a common problem. Good luck

• pages started freezing, force to quit and restart does not work

  Try to do the homework, no good with computers. I used screen split pages with safari, then I'll click to pages and the cursor does not blink, and I can ty click on something, but nothing helped. I even try to click in Safari and who does not work either. I have to then press the task or what you call it, force quit applications, then restart. It started just randomly and really annoying, see I need to deal with all my classes AP. Pages for this when alone as well.

  Hello ElliottRadovan,

  I understand that the Pages and Safari sometimes appear to hang when switching between the two. Fortunately we have some articles that detail how to identify and correct the source of the problem, restore stability to your Mac.

  Isolate problems on Mac OS X
  https://support.Apple.com/en-us/HT203161

  Mac OS X: how to solve a software problem
  https://support.Apple.com/en-us/HT201516

  See you soon!

• Toshiba Satellite C55-C1K1 - 10 Windows does not work

  Bought one for my mother and it has been a nightmare. The first was a problem with the keyboard that caused it typing random characters on the screen.

  The replacement worked very well for about two months, now the touchpad has stopped working. I use the touchpad in the BIOS, so I know that is not a hardware failure. Tried all the drivers available, including the MOMENTUM (which shows a CRC problem) on the Toshiba site and nothing would work. Tried reinstall of keeping my files didn't work. Then finally took an image of the disk and installed a full Windows 10 and it STILL does not work.

  So what am I, I wanted to now install Windows 8 on it and see which will work. Why Toshiba push 10 windows on people when they did not ensure that the software and hardware are compatible.

  UPDATE.

  I installed Windows 8 on the laptop, and STILL the touchpad does not work. Finally I found a thread on another site, that said that for another model of C55 - A (similar) of Toshiba, the solution has been updated to BIOS. So I downloaded the latest BIOS update and installed. Restarted after the update, and the touchpad started working again. Restarted a few times and it still worked.

  Finally imaged original return 10 Windows operating system on the hard drive, and the touchpad and F5 (activeent/desactiveent) both work now. Toshiba needs to have a note sent with these laptops or to have a reminder. Two days lost on this nonsense.

• Portege M200 - pen does not work with the screen

  So I bought a pen for M200 and reinstalled the operating system.
  Now I M200 with Windows XP Tablet PC edition, a utility Screen Rotation and usefulness of the stylus button. Now Pen buttons work fine with my new pen, but the screen itself does not work. I mean, the stylus does not work with the screen.

  I have a mouse, and another menu pointing devices in Device Manager and it includes the following submenus:

  HID compatible mouse (I use the random DELL mouse)
  Mouse PS/2 Cimpatible (?)
  --------

  I think there must be something else...
  Please tell me, forum, what drivers should I download to get the pen to work?

  Stand by. Are you using the original image of recovery Toshiba (operating system) or you have installed your version?

• Touchpad mouse does not work on my Satellite L850D - 12 p

  Hello

  I had problems with my laptop since the beginning. The hard drive failed and the carpet of mouse and keyboard have had intermittent problems since day 1. Randomly, they stop working and will not work again until you restart.

  Recently the mouse pad often stopped to work prompting me to uninstall the Synoptics driver for this device. I removed the device from Device Manager and expected that when I rebooted windows driver would be. This was not the case. I reinstalled from the driver that I got from this site and now is without recognizing the mouse from the Synoptics software. Only the USB mouse that I plugged in worked and even then it often froze.

  I tried a soft reset of the laptop wiping my settings and more recently a reset. I think that it is purely a software problem.

  The mouse still does not work. Does anyone have ideas on this?

  Laptop is L850D - 12 p.

  Any help is well suitable.

  > I have tried a soft reset of the laptop wiping my settings and more recently a reset. I think that it is purely a software problem.

  The point is that, for software problems, the Toshiba Recovery disk should solve your problems of keyboard and touchpad. So, I think that this issue is NOT due to software problem.

  You mentioned that you had these problems since the first day buying hmm I m wondering why you did not contact the authorized service provider or a retailer of laptop for a fix.
  New devices are covered by warranty and in case of hardware malfunction; the guarantee covers the repair procedure.

  My solution: you can try to recover the laptop once more. Use the original Toshiba recovery disc. Also check if the BIOS is updated.
  Note: the touchpad should work even if the other Synaptics touchpad driver isn't installed. Why? The touchpad is controlled by the default Microsoft driver and current touchpad as touch and scrolling functions do not exist by default. Synaptics touchpad driver adds a few more features and functionality for the touchpad.