Problems connecting to an XP VHD on Windows 7

Similar Questions

• I have a problem connecting to the internet. A windows security message appears requesting a user name and password.

  network/security problem

  I have a problem connecting to the internet. A windows security message appears requesting a user name and password. I spoke with my internet provider and they say it's problems with windows. Administering the computer was an old laptop that isn't in use anymore so I can't change the admin settings. Is that what you can offer and do you need more information about me?

  How you connect to the internet, dsl / comcast / wireless.

  The installation disk of your ISP to the main computer, then put it to the top with a modem what ever, after that you can reload the disc of routers and probably have to reset the default password,

  Once you get the configuration of your Internet service provider again then your router again you can re - enter the wireless or wired computers to the new network,

• Problem connecting Wi - Fi networks unsecured with Windows 8

  Hi all!

  I have problems connecting to unsecure networks that require more authentication via browser thr, as networks of the hotel or Starbucks.
  The networks work wirh all other devices I have, but on my laptop with Windows 8, it doesn't.
  I get a "limited" connectivity and I can't sign on the browser page.
  Why is it so? How can I fix?
  Thank you!

  Hi Emme,

  The issue is limited to any particular Web site?

  This problem can occur because of network settings.

  Try the following and see if it helps.

  Method 1:

  I suggest you to run this utility from the following troubleshooting and check if it helps.

  Network troubleshooting:

  Open the network troubleshooter utility by hitting swipe in the edge right of the screen, tap Find (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), saving troubleshooting network in the search box, touching or clicking on settings, and then type or identify and fix network problems.

  Resolution of the problems of Internet connections:

  Open the troubleshooter of Internet connections by hitting swipe in the edge right of the screen, tap Find (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), entering the troubleshooting in the search box, touching or clicking on settings and then by typing or clicking on the resolution of the problems. Press or click Network and Internet and then press or click Internet connections.

  Troubleshooting network adapter:

  Open the network adapter troubleshooting utility by hitting swipe in the edge right of the screen, tap Find (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), entering the troubleshooting in the search box, touching or clicking on settings and then by typing or clicking on the resolution of the problems. Press or click Network and Internet and then press or click on the network map.

  Method 2:

  This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.

  To disable authentication IEEE 802. 1 X, follow these steps:

  a. press "Windows + R" key on the keyboard to open the run window.

  b. type ncpa.cpl, and then press ENTER.

  c. right click on your wireless network connection, then click Properties.

  d. click the wireless networks tab.

  e. under preferred networks, click your wireless network, and then click Properties.

  f. click on the Authentication tab, click to clear the authentication enable IEEE 802. 1 X for this network check box and then click OK twice.

  Method 3:

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Refer to the steps in the following Microsoft article and check.

  Can't access some Web sites in Internet Explorer: http://support.microsoft.com/kb/967897

  Notes:

  Reset the settings of Internet Explorer feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope that the information provided is useful.

• Having problems connecting to WiFi. It says Windows cannot find certificate to log network

  I am trying to connect to our wifi at home using Netgear N600. I get this message when you try to open a session. It worked before, but our laptop was recently reset.

  Thanks for your help

  Hello AntDre

  It seems that the question you face to either because of incorrect security settings. The link below will help you solve the problem. Find the message by Jeff Liebermann. This is the second down. I hope this helps.
  Windows could not find a certificate to connect to the network.

• Problems connecting an older Acer laptop with Windows XP using a dlink router

  I recently bought a new router dlink (N 300 Router wireless) and installed on my Dell desktop computer that is running Windows 7 Home Premium, desktop as well as my Sony Vaio laptop which runs the same OS connects fine to the internet. When I try to connect to the Acer laptop it does not connect to the internet, when I try to 'Fix' the wireless connection, he says he can't fix it. It allows to connect very well with older dlink router but I had to replace it, the new router says it's compatible with Windows XP. Does anyone else have this problem?

  Hi Bluemoongal,

  If you try to connect the Windows XP laptop to the wireless router, follow the steps described in this document...

• Problem connecting to the Buffalo TeraStation with Windows 7 Pro

  Our network has a server running Win2K AD files.  We have added a Buffalo TeraStation TS - X 2. BTA/R5 for more than a year to complete our storage.  Since that time, we had computers, Windows 2000, Windows XP Pro and Windows Vista Pro, and trendy Home and works very well with the Buffalo TeraStation.  Recently, we have replaced Windows 2000-based computers with Windows 7 Pro computers.  Everything works fine - except that they do not connect to the TeraStation.  I can ping the TeraStation.  I can see the TeraStation.  But when I click on the TeraStation to access folders and files, I get an error as follows: "the folder. \\TS-XLFAA is not accessible.  You might not have permission to use this network resource.  Contact the administrator of this server to find out if you have access permissions.  The user name is not found. "All the other workstations access the TeraStation very well, because they always have.  I can't find a solution to this problem.  I tried setting the 'HKEY_LOCAL_MACHINESYSTEM\CurrentControlSet\Control\Lsa\LmCompatibilityLevel' value to 1 and changed "network security: LAN Manager authentication level" to"send LM and NTLM - use NTLMv2 session security if negotiated". as suggested by others, but it didn't work.  Any ideas?  I have several Windows 7 Pro computers that cannot access the TeraStation storage.  Help!  Thank you...

  Browsing through the posts, I found something that worked.  It was suggested to disable the use of IPv6 in network properties and use the ip address of the NAS instead of the server name.  I opened windows Explorer and typed in the address like this: \\192.168.1.11\ and the server was available immediately... Thanks CODY!

  Jim

• Problem connecting more of 20 computers under Windows 7 64-bit

  I just build a PC, Windows 7 Pro 64 bit and shared hard drive of about 25 computers he uses as a render farm.

  problem occurs when I try to connect more than 20 computers and as an error shows that it has reached its connection limit. Tried to change advance sharing users 20 to 30 but can not. Is there a way to get around this or is that windows 7 can not be supported more than 20 computers on a network?

  Thank you...

  I just build a PC, Windows 7 Pro 64 bit and shared hard drive of about 25 computers he uses as a render farm.

  problem occurs when I try to connect more than 20 computers and as an error shows that it has reached its connection limit. Tried to change advance sharing users 20 to 30 but can not. Is there a way to get around this or is that windows 7 can not be supported more than 20 computers on a network?

  Thank you...

  Windows 7 has a limit of 20 computers as described in the agreement (EULA).

  " Device connections. . "You can allow up to 20 other devices to access the software on the licensed computer to use file Services, Print Services, Internet Information Services and Internet and Telephony Services connection sharing only.

  http://www.microsoftstore.com/store/msusa/en_US/DisplayHelpEULAPage

• I have problems connecting to the remote desktop on Windows Server 2008.

  I have many positions of work XP trying to connect to our servers to Server 2008 Remote Desktop, but get the message, "because of a security error, the client could not connect to the remote computer".

  When I check the version of remote desktop it uses, it is 5.2.3790 in program Files\Remote Desktop

  Now, if I go to Windows\System32, I find mstsc.exe and can connect to the same server perfectly.  But if I go to save the connection, RD is up to version 5.2.

  How can I remove the old version and just use the newest one?

  Thank you.

  Original title: a different version of the remote desktop

  Hi msenior,

  Thanks for posting your query in the Microsoft Community.

  Method-

  I would have you post your query in the TechNet Forums because it caters to an audience of it professionals.

  Your query will be better addressed there.

  Check out the link-

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  We know if you need help. We will be happy to help you.

  Thank you.

• Problem connecting via Windows Remote Assistant

  I have a problem connecting to my PC mother via Windows remote assistant. I checked the setting and services run. I get the following error:

  Your computer seems to be configured correctly, but the device or resource (2001:0:5ef5:79fb:2064:2fdb:cd40:5854) does not Your computer seems to be configured correctly, but the device or resource (2001:0:5ef5:79fb:2064:2fdb:cd40:5854) does not	Detected
  Contact your network administrator or ISP (ISP) Completed
  Could not establish a Remote Assistance connection

  
  Could not establish a Remote Assistance connection Detected

  There is no problems detected on this computer

  Completed

  Problems found	Details of detection
  6 Your computer seems to be configured correctly, but the device or resource (2001:0:5ef5:79fb:2064:2fdb:cd40:5854) does not Detected
  Contact your network administrator or ISP (ISP) Completed Windows cannot communicate with the device or resource (2001:0:5ef5:79fb:2064:2fdb:cd40:5854). The computer or the service that you want to achieve may be temporarily unavailable. If the device or resource is nearby and you have access, make sure that it is turned on and connected to the network.

  6 Could not establish a Remote Assistance connection Detected
  There is no problems detected on this computer Completed There could be a problem on the computer that you are trying to connect to. If the person you help running Windows 7, ask them to click Troubleshooting in the Remote Assistance program. If they run older versions of Windows, you can ask them to use the Internet connectivity evaluation tool from the Microsoft Web site.
  Details of detection

  Diagnostic information (Teredo)

  Details on the diagnosis of Teredo:

  
   
  Settings for Teredo
  ---------------------------------------------
  Type: customer
  Server name: teredo.ipv6.microsoft.com.
  Client refresh interval: 30 seconds
  Client port: not specified
  State: qualified
  Type of customer: teredo client
  Network: unmanaged
  NAT: restricted
  Special behavior NAT: UPNP: no PortPreserving: Yes
  Local mapping: 192.168.1.7:57043
  External NAT mapping: 69.248.92.196:57043

  Diagnostic information (Teredo)

  Details on the diagnosis of Teredo:   Settings for Teredo --------------------------------------------- Type: customer Server name: teredo.ipv6.microsoft.com. Client refresh interval: 30 seconds Client port: not specified State: qualified Type of customer: teredo client Network: unmanaged NAT: restricted Special behavior NAT: UPNP: no PortPreserving: Yes Local mapping: 192.168.1.7:57043 External NAT mapping: 69.248.92.196:57043

  Network Diagnostics log

  Name of the file: 398A911D-DDA8-41E3-9FF3-4E36B200143B. Diagnose.Admin.0.etl

  Other newspapers and Network Configuration

  Name of the file: NetworkConfiguration.cab

  Computer name:	USER-PC
  Version of Windows:	6.1
  Architecture:	AMD64
  Time:	Friday, May 16, 2014 14:31:02
  Publisher details

  Detecting network connectivity problems.
  Package version:	1.0
  Publisher:	Microsoft Windows

  Keep in mind that if the person seeking assistance uses a router (instead of connecting directly to the modem), then you will need to redirect port configuration.  The request when she sends uses the IP address of his computer, but that the IP is not always accessible to the public.  For example, IP address of my PC is 192.168.0.4 (the 4th computer on my network at the present time), and this address cannot be used to connect to my PC.  You know my public IP address, so, I need the configuration of port forwarding to direct your incoming connection to my public address during my internal IP address (called traversal NAT, or network address translation).

  There is a reason, I generally recommend free tools that use HTTP transport instead, like Team Viewer app free (for personal use).

• Problem connecting Bluetooth with Windows Mobile Device Center

  Hello

  I have and HTC Snap with WM 6.1 I want to connect to my Satellite P500 running Windows 7 to be able to move the files by using Windows Mobile Device Center.

  I know that this device can talk to this laptop via bluetooth, because there are some utilities bluetooth Toshiba that I can use to get a connection.

  However, even if the Toshiba utility recognizes my bluetooth device, but WMDC is not. WMDC recognises my device when it is connected with a USB cable.

  I don't know about the drvupdate-amd64 download which I think is necessary with WMDC but when I run what it looks like all it does is try to install a device driver for a device that is 'unknown '. I get a message at the end that driver could not be installed.

  I have run out of ideas on how to get these things to work. Someone at - it a similar experience?

  Could this be a problem of COM port? My Bluetooth device to 40 com affected Toshiba stack I don't see a COM 40 in the WMDC, just a port identified as "Bluetooth" settings

  Post edited by: t5247rb

  Hello

  This page of Toshiba Bluetooth may be able to help you;
  http://APS2.toshiba-tro.de/Bluetooth/?page=HOWTO

  Here are very interesting HowTo documents;
  In your case I recommend that you check the docs:

  + How do I set up a connection from the PDA (Windows Mobile 6) to the Windows Mobile Device Center.

  and

  + How to connect PC to internet via Bluetooth using a Windows Mobile 6 phone +.

  Welcome them

• I have a problem connecting to the internet. When I click on the internet it goes straight to windows media player

  Hi I have a problem connecting to the internet. When I click on the internet it goes straight to windows media player.

  HI Maria,

  If you are using Vista, go to http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and scroll down to EXE and click or double-click it to run the program to restore EXE file associations.  Once done, do the same for LNK entry.  This should restore your programs and get the Internet icon to go to the internet rather than WMP.  If you use Windows 7, go to http://www.sevenforums.com/tutorials/19449-default-file-type-associations-restore.html. If you are using XP, go to http://www.dougknox.com/xp/file_assoc.htm.

  If this does not work and it started recently, try a system restore to a restore point BEFORE the problem started.  If you use Windows 7, see:http://www.sevenforums.com/tutorials/700-system-restore.html. If you are using Vista, see:http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/. If you are using XP, see:http://www.bleepingcomputer.com/tutorials/tutorial56.html.  If the first attempt fails, try an earlier point or two because the problem may have started before you noticed.

  I hope this helps.

  Good luck!

• I have problems connecting my laptop to the TV with 2 ft HDMI connection. Whenever I try to connect "Windows cannot detect tvwizard2ft.exe" appears.

  tvwizard2ft.exe

  I have problems connecting my laptop to the TV with 2 ft HDMI connection. Whenever I try to connect "Windows cannot detect tvwizard2ft.exe" appears.

  Download and install the latest graphics driver. Visit the website of intel to get that. Once downloaded unzip the file and search for tvwsetup.exe.Run this file.

  You may also download and install .NET Framework 3.0 (SP2)

• Whenever I connect to my hotmail account using Windows Live, I get a warning, "there is a problem with this Web site's secure certificate. »

  original title: security

  Whenever I connect to my hotmail account using Windows Live, I get a warning, "there is a problem with this Web site's secure certificate. »

  Security certificate problems may indicate an attempt to fool you or intercept any data you send to the server.
  	We recommend that you close this webpage and do not make this Web site.
  	Click here to close this webpage.
  	Continue to this website (not recommended).
  	More information If you arrived at this page by clicking a link, check the Internet address in the address bar to be sure this is the address you've been waiting for. When you go to a Web site with an address as https://example.com, try to add the "www" in the address, https://www.example.com. If you choose to ignore this error and continue, don't get personal information on the Web site. For more information, see "Certificate errors" in Internet Explorer Help.

  Some things you can try:

  You can have old certificates root on your computer.  Try to update your root certificates from the link provided in the paragraph "Root Update Package (intended for Windows XP only)" in the following article:

  "Members of the certificate program root Windows.
    <>http://support.Microsoft.com/kb/931125 >

  Depending on which version of Internet Explorer and Service Pack level of your machine, one of the following articles might help you:

  ' "There is a problem with the security certificate from the website" when you try to visit a secure in Internet Explorer Web site.
    <>0 http://support.Microsoft.com/kb/93185>

  "Certificate error Web page is displayed when you try to visit an SSL Web using Internet Explorer 7:"There is a problem with the security certificate from the Web site""
    <>http://support.Microsoft.com/kb/950067 >

  It is also possible that indeed, you will be redirected to a false site.  Check your file C:\Windows\System32\drivers\etc\hosts ensure that there is not a bogus entry for your hotmail login.  Generally, the only line that is required in this file does not begin with a character ' # ' is ' 127.0.0.1 localhost '.

  HTH,
  JW

• Problem connecting to Windows Error Reporting Service

  Some reports may not be uploaded to the "Windows Error Reporting Service". Please try again later.

  How much later?

  Hi Bob,

  Welcome to the Microsoft community.

  According to the application, you experience problems connecting to the Windows Error Reporting Service.

  To help solve your problem better, could you give us the following information?

  1. Since when are you facing this problem?
  2. Do you receive an error message when you connect to the Windows Error Reporting Service?

  Method 1: check if Windows Error Reporting Service is started or not.

  1. click on start

  2. in the start search box, type Services

  3. click right on - RUN as ADMINISTRATOR

  Check if the below mentioned services has mentioned State and type start.

  Windows Error Reporting Service started Automatic\Manual.

  Also check the dependency services that are required for Windows Error Reporting Service to run.

  To verify that double-click the service, and click the Dependencies tab.

  Method 2: I suggest you run the checker system (SFC) analysis files and check if it helps.

  See the Microsoft support Article to start the scanning of the SFC.

  Use the System File Checker tool to repair missing or corrupted system files

  http://support.Microsoft.com/kb/929833/en-us

  Method 3: use the cleanup utility disk and check if it helps.

  See the Microsoft Help Article on how to perform a disk cleanup.

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  For any future reference.

  https://TechNet.Microsoft.com/en-us/library/bb490841.aspx

  Try these steps and let us know the results for assistance.

  Thank you

• Problem connecting to the Windows error reporting service

  Whenever I try to check for solutions in the Windows 7 Action Center, I get the following error message: problem connecting to the Windows error reporting service. Some of the reports can not be uploaded to the Windows error reporting service. Please try again later.

  This problem began to appear a few days ago, even if I did not any changes to my computer. I do not have any firewall (with the exception of the default Windows Firewall) and all my other programs work very well on the Internet.

  Any ideas what could cause the problem?

  Problem solved.

  I actually had to purge all existing reports by using the disk cleanup utility.