problems loading product of downing. Keyring watch active btu willnto download.

Similar Questions

• Problems loading a file in SkyDrive: "sorry, SkyDrive can't download files. Please download the files that are contained in the folder instead.

  Whenever I try to add a "xlsx" to "SkyDrive" document I get the following message:

  Sorry, SkyDrive can't download files. Please download the files that are contained in the folder instead. Neither I am able to drag and drop files in skydrive folder!

  I even tried as well to load it from the Office & do slip from the "Desktop" to the "SkyDrive" - but not of joy!

  Assistance would be greatly appreciated

  > Sorry, that SkyDrive impossible to download files. Please download the files that are contained in the folder instead.

  He tells you to OPEN the file, download the files on skydrive. BUR, NOT the FOLDER itself.

  You can download several files at the same time. How many? I'm not sure. I do not have more than 2 files both myself.

  SkyDrive limited maximum 50 MB each download.

• I loaded Windows6. 0-kb947821-v21 - x 86 - 1.msu to solve a problem on my computer down.

  I loaded Windows6. 0-kb947821-v21 - x 86 - 1.msu to solve a problem on my computer down.  A dialog said it was installed but I can not findit on my computer to make it work.  I need it because my Vista is not able to get the windows updates

  Tool update of the system looking for inconsistencies in your computer, while it is installed. This usually takes less than 15 minutes to start the scan, however, the tool might take significantly longer on some environments. Although the progress bar may appear to stop, the analysis is still running and you should not cancel the update.

  http://support.Microsoft.com/kb/947821 more info here.

  So you see, it was already running while it was being installed.

  If you cancel and try again.

  If you do not cancel the tool correction errors that he found.

  The tool does not always work.

  Try to update again.

  Post back with messages of error if you still have a problem.

• When opening new page, an additional window says "problem loading page".

  Opening the causes of Firefox open a second tab down to make it appear that reads "problem loading page"... the pages I want to see on all sites, well, I just get an annoying extra tab with this message... If I click on this tab, a small window appears in the upper left corner of the screen that contains the error message. I use FF 3.6. This just started happening recently... maybe after my upgrade of las FF.

  Make a check of malware with a few programs to scan for malware.
  
  You must use all of the programs, because each detect different malware.
  
  Make sure that you update each program to get the latest version of the database prior to scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
  • http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page

  See also 'Spyware on Windows': http://kb.mozillazine.org/Popups_not_blocked and what to do when searches take you on the wrong search site

• Error message: problem loading parameters and check the event log or ask the administrator

  My wallpaper, the desktop icons and most of my documents are gone.

  I have Vista Home Premium and a couple of days and I connected my desktop background was changed. Several desktop icons are missing, and a message came up saying there was a problem loading my settings and check the event log, or ask the administrator (me) for more details. All my "Favorites" were missing in the sidebar and my documents and recorded images folders are empty. Microsoft customer service tells me there is an error in my code for the identification of product (from the Windows Activation in systems and Maintenance) so I can't help out.

  Any thoughts? Thank you!

  Hello, G25

  It is likely that your user profile is damaged. I would advise to create a new user account and test if you get any errors. If everything works as expected under the new user account, you can start to recover your account profile by following the steps on the following link: difficulty of a user profile is corrupted

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• There was a problem loading of files that can be restored

  Hello. I am currently using OSSierra and 10 for my iPhone and iPad iOS. I activated this thing where you save your desktop stuff on your iCloud then accidentally deleted. I tried to restore them in iCloud restoration but it goes on to say: "there was a problem loading files that can be restored. Please Try Again Later ".

  Please help me. I can't lose these files forever.

  The files have been deleted icloud or Mac. ?

  Good day

• Having problems loading google

  Its been a week or two that I started to have issues loading youtube. Later, I started having problems loading google as well. Its very annoying and I don't know what is happening since no changes were made on the system.  Its touching all my apple products connected to my wifi.

  I removed the cache, history, cookies and tried different browsers and nothing suits him.

  Yesterday, I actually changed my DNS servers and it fixed it momentarily, but now its still doesn't work.

  Any of you have an idea on how to solve the problem?

  It does not google, gmail etc. But he has no problem loading what anyone else. The message also said the following:

  Sara can't open the page "www.google.com" because he has a server that hosts this page does not.

• Safari does not load pages after sleep in the active window

  Please note: I'm French, so what you read is not perfect. Thank you.

  Hi everyone, it has been so long that I tried to solve my problem on Safari.

  Let me explain what happens: when I wake my Mac, some site not loading, including Youtube, Facebook and Google until I

  -Close the Safari window and open a new

  -Wait at least a minute or two

  -Spam the shortcut for refresh up to what a "page not found" error.

  I tried all explained in this or other forums and do these things:

  -Reinstall the operating system (but keeping my data)

  -Restore with a Time Capsule

  -Open the terminal and type these commands:

  -Fixed permissions and owner

  sudo find ~ $TMPDIR... - exec chflags h nouchg, nouappnd, noschg, nosappnd {} - exec chown () $UID h - exec chmod + rw {} + - exec chmod () n h ++ - type d - exec chmod h + x {} + 2 > & -.

  -Reset Safari

  MV ~/Library/Safari ~/Desktop/Safari-'date + %Y %hour %m %d ' %s; RM - Rf ~/Library/Caches/Apple\-\ Safari\---------Safari\ Extensions\ Gallery; RM - Rf ~/Library/Caches/Metadata/Safari; RM - Rf ~ / Library/Caches/com.apple.Safari; RM - Rf ~ / Library/Caches/com.apple.WebKit.PluginProcess; RM - Rf ~ / Library/Cookies/Cookies.binarycookies; RM - Rf ~/Library/Preferences/Apple\-\ Safari\---------Safari\ Extensions\ Gallery; RM - Rf ~ / Library/Preferences/com.apple.Safari.LSSharedFileList.plist; RM - Rf ~ / Library/Preferences/com.apple.Safari.RSS.plist; RM - Rf ~ / Library/Preferences/com.apple.Safari.plist; RM - Rf ~ / Library/Preferences/com.apple.WebFoundation.plist; RM - Rf ~ / Library/Preferences/com.apple.WebKit.PluginHost.plist; RM - Rf ~ / Library/Preferences/com.apple.WebKit.PluginProcess.plist; RM - Rf ~/Library/PubSub/Database; RM - Rf ~/Library/Saved\ Application\ State/com.apple.Safari.savedState

  -Fix permissions with the inbuilt system tool

  sudo/usr/libexec/repair_packages - repair - standard-pkgs - volume.

  -Log in as a guest

  -Start in safe mode

  -Switch to recovery mode and put something else in the window "resetpassword.

  -Remove all apple leaves me with the GUI (cookies, cache, etc.)

  -Mess with network settings, but it's obviously very well because other programs have no problem for example. Chrome, Firefox, Mail, Push notifications...

  -Uninstall all extensions safari

  -Unplug my micro sd card and reboot (which is constantly plugged into my mac)

  I am so angry with my computer because I paid 1.5 k for a computer that is not able to make the task easier for a modern computer. Even a €50 computer has embedded software that can handle a resume from sleep without having to restart the entire software... Imagine if you had to do it on your iPhone, you will eventually get a refund within a week or less because it is not normal in 2015 to have this kind of problem. I hope that I have no problem with safari on my 6s and I don't plan to spend my browser because Safari is part of the Apple ecosystem and have the perfect sync and battery management.

  So I need to get this fixed a problem and I really need your help because a lot of people had this problem on the internet, but NEVER seen someone who explained how it happened is the correction of a problem. My Mac running the latest version of the software which is 11.2 starting today.

  Here is a video of the problem:

  https://www.YouTube.com/watch?v=AjfAlkKEVsc

  And some examples of the threads on the internet, I found the same problem:

  Safari does not work after the mode 'sleep'. Apple support communities

  Safari doesn´t supported pages after waking up

  Safari does not load page after waking up

  Facebook doesn't "work" after the awakening from the sleep - MacNN Forums

  Corruption Safari       See post by Linc Davis

• Hello, I have problems with Creative Cloud Packager. I bought this product yesterday and since then I can not download completely all components. 59% or 65% of the download I get the message: "connect to the internet and try again." I am connected to Inte

  Hello, I have problems with Creative Cloud Packager. I bought this product yesterday and since then I can not download completely all components. 59% or 65% of the download I get the message: "connect to the internet and try again." I am connected to the internet through Ethernet, I checked my connections through various steps recommended buy Adobe to see if my connection is correct and he is!, so why I can't complete the download process. I feel frustrated because I have clients awaiting results of my work that I can do right now. I have read all the information on the Adobe pages but nothing shows that can help solve my problem also the way things are described sometimes seem complicated and exotic as; not everything I understand particularly when it comes to some technical descriptions or abbreviations. I would be grateful someone help and advice on this topic. Thank you Nina

  Hi Nina,

  This link might help: cloud creative activation and troubleshooting of sign-in

  Kind regards

  Sheena

• Hello. I'm having a problem loading and using my Adobe Photoshop CS3. This is the third time that I use this forum. I us a PC. The operating system is "Microsoft Windows 7 Home prem". I recently had to remove my hard drive and reload the operating

  Hello.

  I'm having a problem loading and using my Adobe Photoshop CS3. This is the third time that I use this forum. I us a PC. The operating system is "Microsoft Windows 7 Home prem". I recently had to remove from my hard drive and reload the operating system with all the updates and load to the top of my existing software. All my software works except my Photoshop CS3, which I use most. I loaded the software disc and download online. The system of charge very well and activation is complete.  Here are the main things that don't work properly, I have noticed so far. First of all, I can't open my camera RAW (I can with my Lightroom software, but not with my Photoshop software?). So I can't open any of my files of digital camera? Second, I can open a .jpeg file and use the Photoshop software and I can save the changes, but when I turn off my calculated the software doesn't seem to be on my computer. When I go to Windows ' search program and files "software is not located here. When I go to "Uninstall" the software of the foldername is there it is. "Photoshop CS3" but there isn't any size file to it IE 400 MB, while my software "Lightroom" on the 'uninstall' section will have a file for example size 400 MB tied to it. Thirdly, I also have a photosoftware of B + W, which operated in Photoshop; It's "NIK software - Silver Efex Pro" and it is located in the subtitle of 'filter' of Photoshop CS3. I use Silver Efex and all functions are working properly, but I can't save the file, it does not save the changes to save.

  Please can you help me.

  Thank you.

  KEith

  Try the forum for Photoshop.

• I just down loaded seduce as a trial. I have the download of sw and extracted the file in my download folder, but I can't open the software. I get the following error: archive part of Adobe Captivate 8 (64-bit) file is missing.

  I just down loaded captivate 8 as a trial. I have download sw both Extractor file in my download folder, but I can't open the software. I get the following error: archive part of Adobe Captivate 8 (64-bit) file is missing. You need all parts in the same folder in order to extract captivate 64bits. Download all the parts.

  Any suggestions?

  If the download is more than one file, please download the two files in the same folder, and then double-click the exe file to start the installation.

  If you still have questions, please see this link:

  https://helpx.Adobe.com/x-productkb/global/troubleshoot-download-problems.html

  Guinot

• Problems loading files RAW of Canon 6 d to 10 items

  Items 10 - Windows: I've been using the software for a couple of years and never had a problem loading the RAW files from my Canon T2i ir 60 d, however I just bought a Canon 6 d and when I try to load a RAW of the 6 d I get a cannot open ' C:\User... CR2 "because it's the wrong type of file.  I thought that cameraraw 6.5 patch would be the solution but when trying to install I get "error loading workflow Updater.

  Refer

  http://helpx.Adobe.com/Creative-Suite/KB/camera-raw-plug-supported-cameras.html

  http://helpx.Adobe.com/x-productkb/global/camera-raw-compatible-applications.html

  The Canon 60 d requires that Camera Raw 6.2 (or later) that is compatible with the 10 elements (or later version).

  Canon 6 d requires that Camera Raw 7.3 (or later) that is compatible with 11 elements (or later version). Items 10 is not compatible with Camera Raw 7.3.

  Then you must either upgrade a) 12 items to open and edit files Raw 6 d or b) use the free Adobe DNG converter to convert the 6 d DNG Raw files - adds an extra step in the workflow. Then, edit the DNG in 10 items.

  http://www.Adobe.com/products/Photoshop/extend.displayTab2.html

  It is regrettable to photography digital camera upgrade usually means that the upgrade of software post-processing so.

• Problem loading Module

  Dear Flex community

  I'm actually huge flex fan, but since I work with the module becomes a pain my *... Sorry for my word. But I'm stuck in a little problem: loading and unloading of modules.

  It seems so easy to load or unload the module using the module Manager or a moduleLoader... I tried all the options, all the examples found on any website out there. The result is always the same: my modules do not load or spoil my GUI.

  Here's my problem: I load different Modules built very easy without functions, only the user interface. Loading modules is not the problem, but one s as soon as I load another module, and then reload the first flex module freezes and my GUI completely breaks. Buttons no longer work, the menu bar a little weird and so on. I have to have to close my browser and start over.

  The product problem no matter how simple or complex the module is.

  I use Flex Builder 3.0.

  I charge my modules, as shown here: http://livedocs.adobe.com/flex/3/html/help.html?content=modular_5.html

  The modules do not contain functions or import managers or categories.

  can someone help me pls? Its very frustrating. I'm working on it for months.

  Best regards

  David

  I got exceptions when I ran your test scenario.  You are not testing the use of the debugger?  Add these three lines to the main application seems to help.

  Import mx.managers.PopUpManager; PopUpManager;

  Import mx.managers.HistoryManager; HistoryManager;

  Import mx.collections.ArrayCollection; Collection ArrayCollection;

• I upgraded to FF 32.0.2 and just get "Problem loading Page" all the site not working in Internet Explorer. Tried to reboot & download again - no luck

  Any Web page, I try to access since I downloaded the latest version of FF, they do not load. All I get is the error message "problem loading Page connection has expired.

  The server to smile.amazon.com takes too long to respond.

     The site could be temporarily unavailable or too busy. Try again in a few moments.
     If you are unable to load any pages, check your computer's network connection.
     If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
  

  I cannot access these pages in IE - just FF - and immediately after that I installed FF 32.0.2

  I have tried to reboot and same reinstall - but can't access anything on FF.

  Hello, normally these problems are caused by a security/firewall software which does not recognize and therefore blocks the new versions of firefox. If please delete all the rules of the program for firefox to your firewall and let it detect the new version of the browser again.

  Difficulty of problems connecting to websites after Firefox update

• 30.0 Firefox is so slow since updated. IE & Chrome not having problems loading pages, showing the blank pages, need two or more tests to open Web pages.

  30.0 Firefox is so slow since updated. IE & Chrome not having problems loading pages, showing the blank pages, need two or more tests to open Web pages. It seems to have something to do with the Visual data on the pages. My MSN homepage gets old and dies every time I open the page after the re-opening and closing of firefox. It takes forever! What is a memory drain? Each open page in a new session of firefox suffer the same fate.

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;
  Press < Alt > or < F10 > to display the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then Advanced > General.
  Find and stop using hardware acceleration.

  Dig safe web sites and see if there is still a problem. Then restart.